linux/drivers/gpu/drm/kmb/kmb_plane.h
Edmund Dea 982f8ad666 drm/kmb: Disable change of plane parameters
Due to HW limitations, KMB cannot change height, width, or
pixel format after initial plane configuration.

v2: removed memset disp_cfg as it is already zero.

Fixes: 7f7b96a8a0 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-21 11:08:08 +02:00

75 lines
1.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only
*
* Copyright © 2018-2020 Intel Corporation
*/
#ifndef __KMB_PLANE_H__
#define __KMB_PLANE_H__
#include <drm/drm_fourcc.h>
#include <drm/drm_plane.h>
#define LCD_INT_VL0_ERR ((LAYER0_DMA_FIFO_UNDERFLOW) | \
(LAYER0_DMA_FIFO_OVERFLOW) | \
(LAYER0_DMA_CB_FIFO_OVERFLOW) | \
(LAYER0_DMA_CB_FIFO_UNDERFLOW) | \
(LAYER0_DMA_CR_FIFO_OVERFLOW) | \
(LAYER0_DMA_CR_FIFO_UNDERFLOW))
#define LCD_INT_VL1_ERR ((LAYER1_DMA_FIFO_UNDERFLOW) | \
(LAYER1_DMA_FIFO_OVERFLOW) | \
(LAYER1_DMA_CB_FIFO_OVERFLOW) | \
(LAYER1_DMA_CB_FIFO_UNDERFLOW) | \
(LAYER1_DMA_CR_FIFO_OVERFLOW) | \
(LAYER1_DMA_CR_FIFO_UNDERFLOW))
#define LCD_INT_GL0_ERR (LAYER2_DMA_FIFO_OVERFLOW | LAYER2_DMA_FIFO_UNDERFLOW)
#define LCD_INT_GL1_ERR (LAYER3_DMA_FIFO_OVERFLOW | LAYER3_DMA_FIFO_UNDERFLOW)
#define LCD_INT_VL0 (LAYER0_DMA_DONE | LAYER0_DMA_IDLE | LCD_INT_VL0_ERR)
#define LCD_INT_VL1 (LAYER1_DMA_DONE | LAYER1_DMA_IDLE | LCD_INT_VL1_ERR)
#define LCD_INT_GL0 (LAYER2_DMA_DONE | LAYER2_DMA_IDLE | LCD_INT_GL0_ERR)
#define LCD_INT_GL1 (LAYER3_DMA_DONE | LAYER3_DMA_IDLE | LCD_INT_GL1_ERR)
#define LCD_INT_DMA_ERR (LCD_INT_VL0_ERR | LCD_INT_VL1_ERR \
| LCD_INT_GL0_ERR | LCD_INT_GL1_ERR)
#define POSSIBLE_CRTCS 1
#define to_kmb_plane(x) container_of(x, struct kmb_plane, base_plane)
#define POSSIBLE_CRTCS 1
#define KMB_MAX_PLANES 2
enum layer_id {
LAYER_0,
LAYER_1,
LAYER_2,
LAYER_3,
/* KMB_MAX_PLANES */
};
enum sub_plane_id {
Y_PLANE,
U_PLANE,
V_PLANE,
MAX_SUB_PLANES,
};
struct kmb_plane {
struct drm_plane base_plane;
unsigned char id;
};
struct layer_status {
bool disable;
u32 ctrl;
};
struct disp_cfg {
unsigned int width;
unsigned int height;
unsigned int format;
};
struct kmb_plane *kmb_plane_init(struct drm_device *drm);
void kmb_plane_destroy(struct drm_plane *plane);
#endif /* __KMB_PLANE_H__ */