korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-17 01:04:19 +08:00
Code Issues Packages Projects Releases Wiki Activity
7d12e780e0
linux/drivers/input/mouse/sermouse.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

362 lines
8.8 KiB
C
Raw Blame History

/*
* $Id: sermouse.c,v 1.17 2002/03/13 10:03:43 vojtech Exp $
*
* Copyright (c) 1999-2001 Vojtech Pavlik
*/
/*
* Serial mouse driver for Linux
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Serial mouse driver"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
static const char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
"Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
"Logitech MZ++ Mouse"};
struct sermouse {
struct input_dev *dev;
signed char buf[8];
unsigned char count;
unsigned char type;
unsigned long last;
char phys[32];
};
/*
* sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
* applies some prediction to the data, resulting in 96 updates per
* second, which is as good as a PS/2 or USB mouse.
*/
static void sermouse_process_msc(struct sermouse *sermouse, signed char data)
{
struct input_dev *dev = sermouse->dev;
signed char *buf = sermouse->buf;
switch (sermouse->count) {
case 0:
if ((data & 0xf8) != 0x80) return;
input_report_key(dev, BTN_LEFT, !(data & 4));
input_report_key(dev, BTN_RIGHT, !(data & 1));
input_report_key(dev, BTN_MIDDLE, !(data & 2));
break;
case 1:
case 3:
input_report_rel(dev, REL_X, data / 2);
input_report_rel(dev, REL_Y, -buf[1]);
buf[0] = data - data / 2;
break;
case 2:
case 4:
input_report_rel(dev, REL_X, buf[0]);
input_report_rel(dev, REL_Y, buf[1] - data);
buf[1] = data / 2;
break;
}
input_sync(dev);
if (++sermouse->count == 5)
sermouse->count = 0;
}
/*
* sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
* generates events. With prediction it gets 80 updates/sec, assuming
* standard 3-byte packets and 1200 bps.
*/
static void sermouse_process_ms(struct sermouse *sermouse, signed char data)
{
struct input_dev *dev = sermouse->dev;
signed char *buf = sermouse->buf;
if (data & 0x40) sermouse->count = 0;
switch (sermouse->count) {
case 0:
buf[1] = data;
input_report_key(dev, BTN_LEFT, (data >> 5) & 1);
input_report_key(dev, BTN_RIGHT, (data >> 4) & 1);
break;
case 1:
buf[2] = data;
data = (signed char) (((buf[1] << 6) & 0xc0) | (data & 0x3f));
input_report_rel(dev, REL_X, data / 2);
input_report_rel(dev, REL_Y, buf[4]);
buf[3] = data - data / 2;
break;
case 2:
/* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
buf[0] = buf[1];
data = (signed char) (((buf[1] << 4) & 0xc0) | (data & 0x3f));
input_report_rel(dev, REL_X, buf[3]);
input_report_rel(dev, REL_Y, data - buf[4]);
buf[4] = data / 2;
break;
case 3:
switch (sermouse->type) {
case SERIO_MS:
sermouse->type = SERIO_MP;
case SERIO_MP:
if ((data >> 2) & 3) break; /* M++ Wireless Extension packet. */
input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
break;
case SERIO_MZP:
case SERIO_MZPP:
input_report_key(dev, BTN_SIDE, (data >> 5) & 1);
case SERIO_MZ:
input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
input_report_rel(dev, REL_WHEEL, (data & 8) - (data & 7));
break;
}
break;
case 4:
case 6: /* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
buf[1] = (data >> 2) & 0x0f;
break;
case 5:
case 7: /* Ignore anything besides MZ++ */
if (sermouse->type != SERIO_MZPP) break;
switch (buf[1]) {
case 1: /* Extra mouse info */
input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));
break;
default: /* We don't decode anything else yet. */
printk(KERN_WARNING
"sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
break;
}
break;
}
input_sync(dev);
sermouse->count++;
}
/*
* sermouse_interrupt() handles incoming characters, either gathering them into
* packets or passing them to the command routine as command output.
*/
static irqreturn_t sermouse_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
struct sermouse *sermouse = serio_get_drvdata(serio);
if (time_after(jiffies, sermouse->last + HZ/10)) sermouse->count = 0;
sermouse->last = jiffies;
if (sermouse->type > SERIO_SUN)
sermouse_process_ms(sermouse, data);
else
sermouse_process_msc(sermouse, data);
return IRQ_HANDLED;
}
/*
* sermouse_disconnect() cleans up after we don't want talk
* to the mouse anymore.
*/
static void sermouse_disconnect(struct serio *serio)
{
struct sermouse *sermouse = serio_get_drvdata(serio);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_unregister_device(sermouse->dev);
kfree(sermouse);
}
/*
* sermouse_connect() is a callback form the serio module when
* an unhandled serio port is found.
*/
static int sermouse_connect(struct serio *serio, struct serio_driver *drv)
{
struct sermouse *sermouse;
struct input_dev *input_dev;
unsigned char c = serio->id.extra;
int err = -ENOMEM;
sermouse = kzalloc(sizeof(struct sermouse), GFP_KERNEL);
input_dev = input_allocate_device();
if (!sermouse || !input_dev)
goto fail;
sermouse->dev = input_dev;
snprintf(sermouse->phys, sizeof(sermouse->phys), "%s/input0", serio->phys);
sermouse->type = serio->id.proto;
input_dev->name = sermouse_protocols[sermouse->type];
input_dev->phys = sermouse->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = sermouse->type;
input_dev->id.product = c;
input_dev->id.version = 0x0100;
input_dev->cdev.dev = &serio->dev;
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
input_dev->private = sermouse;
if (c & 0x01) set_bit(BTN_MIDDLE, input_dev->keybit);
if (c & 0x02) set_bit(BTN_SIDE, input_dev->keybit);
if (c & 0x04) set_bit(BTN_EXTRA, input_dev->keybit);
if (c & 0x10) set_bit(REL_WHEEL, input_dev->relbit);
if (c & 0x20) set_bit(REL_HWHEEL, input_dev->relbit);
serio_set_drvdata(serio, sermouse);
err = serio_open(serio, drv);
if (err)
goto fail;
input_register_device(sermouse->dev);
return 0;
fail: serio_set_drvdata(serio, NULL);
input_free_device(input_dev);
kfree(sermouse);
return err;
}
static struct serio_device_id sermouse_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_MSC,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{
.type = SERIO_RS232,
.proto = SERIO_SUN,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{
.type = SERIO_RS232,
.proto = SERIO_MS,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{
.type = SERIO_RS232,
.proto = SERIO_MP,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{
.type = SERIO_RS232,
.proto = SERIO_MZ,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{
.type = SERIO_RS232,
.proto = SERIO_MZP,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{
.type = SERIO_RS232,
.proto = SERIO_MZPP,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, sermouse_serio_ids);
static struct serio_driver sermouse_drv = {
.driver = {
.name = "sermouse",
},
.description = DRIVER_DESC,
.id_table = sermouse_serio_ids,
.interrupt = sermouse_interrupt,
.connect = sermouse_connect,
.disconnect = sermouse_disconnect,
};
static int __init sermouse_init(void)
{
serio_register_driver(&sermouse_drv);
return 0;
}
static void __exit sermouse_exit(void)
{
serio_unregister_driver(&sermouse_drv);
}
module_init(sermouse_init);
module_exit(sermouse_exit);
Reference in New Issue View Git Blame Copy Permalink