mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
5789772641
Support explicit monitor interface to keep injection working after the HW queue changes. This also finally enables sniffer mode. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2368 lines
65 KiB
C
2368 lines
65 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
|
|
*
|
|
* Portions of this file are derived from the ipw3945 project, as well
|
|
* as portions of the ieee80211 subsystem header files.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_arp.h>
|
|
|
|
#include <net/mac80211.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include "iwl-eeprom.h"
|
|
#include "iwl-dev.h"
|
|
#include "iwl-io.h"
|
|
#include "iwl-agn-calib.h"
|
|
#include "iwl-agn.h"
|
|
#include "iwl-trans.h"
|
|
#include "iwl-op-mode.h"
|
|
#include "iwl-drv.h"
|
|
#include "iwl-modparams.h"
|
|
|
|
/******************************************************************************
|
|
*
|
|
* module boiler plate
|
|
*
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* module name, copyright, version, etc.
|
|
*/
|
|
#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
#define VD "d"
|
|
#else
|
|
#define VD
|
|
#endif
|
|
|
|
#define DRV_VERSION IWLWIFI_VERSION VD
|
|
|
|
|
|
MODULE_DESCRIPTION(DRV_DESCRIPTION);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("iwlagn");
|
|
|
|
void iwl_update_chain_flags(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_rxon_context *ctx;
|
|
|
|
for_each_context(priv, ctx) {
|
|
iwlagn_set_rxon_chain(priv, ctx);
|
|
if (ctx->active.rx_chain != ctx->staging.rx_chain)
|
|
iwlagn_commit_rxon(priv, ctx);
|
|
}
|
|
}
|
|
|
|
/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
|
|
static void iwl_set_beacon_tim(struct iwl_priv *priv,
|
|
struct iwl_tx_beacon_cmd *tx_beacon_cmd,
|
|
u8 *beacon, u32 frame_size)
|
|
{
|
|
u16 tim_idx;
|
|
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
|
|
|
|
/*
|
|
* The index is relative to frame start but we start looking at the
|
|
* variable-length part of the beacon.
|
|
*/
|
|
tim_idx = mgmt->u.beacon.variable - beacon;
|
|
|
|
/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
|
|
while ((tim_idx < (frame_size - 2)) &&
|
|
(beacon[tim_idx] != WLAN_EID_TIM))
|
|
tim_idx += beacon[tim_idx+1] + 2;
|
|
|
|
/* If TIM field was found, set variables */
|
|
if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
|
|
tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
|
|
tx_beacon_cmd->tim_size = beacon[tim_idx+1];
|
|
} else
|
|
IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
|
|
}
|
|
|
|
int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_tx_beacon_cmd *tx_beacon_cmd;
|
|
struct iwl_host_cmd cmd = {
|
|
.id = REPLY_TX_BEACON,
|
|
.flags = CMD_SYNC,
|
|
};
|
|
struct ieee80211_tx_info *info;
|
|
u32 frame_size;
|
|
u32 rate_flags;
|
|
u32 rate;
|
|
|
|
/*
|
|
* We have to set up the TX command, the TX Beacon command, and the
|
|
* beacon contents.
|
|
*/
|
|
|
|
lockdep_assert_held(&priv->mutex);
|
|
|
|
if (!priv->beacon_ctx) {
|
|
IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
|
|
return 0;
|
|
}
|
|
|
|
if (WARN_ON(!priv->beacon_skb))
|
|
return -EINVAL;
|
|
|
|
/* Allocate beacon command */
|
|
if (!priv->beacon_cmd)
|
|
priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
|
|
tx_beacon_cmd = priv->beacon_cmd;
|
|
if (!tx_beacon_cmd)
|
|
return -ENOMEM;
|
|
|
|
frame_size = priv->beacon_skb->len;
|
|
|
|
/* Set up TX command fields */
|
|
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
|
|
tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
|
|
tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
|
|
tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
|
|
TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
|
|
|
|
/* Set up TX beacon command fields */
|
|
iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
|
|
frame_size);
|
|
|
|
/* Set up packet rate and flags */
|
|
info = IEEE80211_SKB_CB(priv->beacon_skb);
|
|
|
|
/*
|
|
* Let's set up the rate at least somewhat correctly;
|
|
* it will currently not actually be used by the uCode,
|
|
* it uses the broadcast station's rate instead.
|
|
*/
|
|
if (info->control.rates[0].idx < 0 ||
|
|
info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
|
|
rate = 0;
|
|
else
|
|
rate = info->control.rates[0].idx;
|
|
|
|
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
|
|
priv->hw_params.valid_tx_ant);
|
|
rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
|
|
|
|
/* In mac80211, rates for 5 GHz start at 0 */
|
|
if (info->band == IEEE80211_BAND_5GHZ)
|
|
rate += IWL_FIRST_OFDM_RATE;
|
|
else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
|
|
rate_flags |= RATE_MCS_CCK_MSK;
|
|
|
|
tx_beacon_cmd->tx.rate_n_flags =
|
|
iwl_hw_set_rate_n_flags(rate, rate_flags);
|
|
|
|
/* Submit command */
|
|
cmd.len[0] = sizeof(*tx_beacon_cmd);
|
|
cmd.data[0] = tx_beacon_cmd;
|
|
cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
|
|
cmd.len[1] = frame_size;
|
|
cmd.data[1] = priv->beacon_skb->data;
|
|
cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
|
|
|
|
return iwl_dvm_send_cmd(priv, &cmd);
|
|
}
|
|
|
|
static void iwl_bg_beacon_update(struct work_struct *work)
|
|
{
|
|
struct iwl_priv *priv =
|
|
container_of(work, struct iwl_priv, beacon_update);
|
|
struct sk_buff *beacon;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if (!priv->beacon_ctx) {
|
|
IWL_ERR(priv, "updating beacon w/o beacon context!\n");
|
|
goto out;
|
|
}
|
|
|
|
if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
|
|
/*
|
|
* The ucode will send beacon notifications even in
|
|
* IBSS mode, but we don't want to process them. But
|
|
* we need to defer the type check to here due to
|
|
* requiring locking around the beacon_ctx access.
|
|
*/
|
|
goto out;
|
|
}
|
|
|
|
/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
|
|
beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
|
|
if (!beacon) {
|
|
IWL_ERR(priv, "update beacon failed -- keeping old\n");
|
|
goto out;
|
|
}
|
|
|
|
/* new beacon skb is allocated every time; dispose previous.*/
|
|
dev_kfree_skb(priv->beacon_skb);
|
|
|
|
priv->beacon_skb = beacon;
|
|
|
|
iwlagn_send_beacon_cmd(priv);
|
|
out:
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static void iwl_bg_bt_runtime_config(struct work_struct *work)
|
|
{
|
|
struct iwl_priv *priv =
|
|
container_of(work, struct iwl_priv, bt_runtime_config);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
/* dont send host command if rf-kill is on */
|
|
if (!iwl_is_ready_rf(priv))
|
|
return;
|
|
iwlagn_send_advance_bt_config(priv);
|
|
}
|
|
|
|
static void iwl_bg_bt_full_concurrency(struct work_struct *work)
|
|
{
|
|
struct iwl_priv *priv =
|
|
container_of(work, struct iwl_priv, bt_full_concurrency);
|
|
struct iwl_rxon_context *ctx;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
goto out;
|
|
|
|
/* dont send host command if rf-kill is on */
|
|
if (!iwl_is_ready_rf(priv))
|
|
goto out;
|
|
|
|
IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
|
|
priv->bt_full_concurrent ?
|
|
"full concurrency" : "3-wire");
|
|
|
|
/*
|
|
* LQ & RXON updated cmds must be sent before BT Config cmd
|
|
* to avoid 3-wire collisions
|
|
*/
|
|
for_each_context(priv, ctx) {
|
|
iwlagn_set_rxon_chain(priv, ctx);
|
|
iwlagn_commit_rxon(priv, ctx);
|
|
}
|
|
|
|
iwlagn_send_advance_bt_config(priv);
|
|
out:
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
|
|
{
|
|
struct iwl_statistics_cmd statistics_cmd = {
|
|
.configuration_flags =
|
|
clear ? IWL_STATS_CONF_CLEAR_STATS : 0,
|
|
};
|
|
|
|
if (flags & CMD_ASYNC)
|
|
return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
|
|
CMD_ASYNC,
|
|
sizeof(struct iwl_statistics_cmd),
|
|
&statistics_cmd);
|
|
else
|
|
return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
|
|
CMD_SYNC,
|
|
sizeof(struct iwl_statistics_cmd),
|
|
&statistics_cmd);
|
|
}
|
|
|
|
/**
|
|
* iwl_bg_statistics_periodic - Timer callback to queue statistics
|
|
*
|
|
* This callback is provided in order to send a statistics request.
|
|
*
|
|
* This timer function is continually reset to execute within
|
|
* REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
|
|
* was received. We need to ensure we receive the statistics in order
|
|
* to update the temperature used for calibrating the TXPOWER.
|
|
*/
|
|
static void iwl_bg_statistics_periodic(unsigned long data)
|
|
{
|
|
struct iwl_priv *priv = (struct iwl_priv *)data;
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
/* dont send host command if rf-kill is on */
|
|
if (!iwl_is_ready_rf(priv))
|
|
return;
|
|
|
|
iwl_send_statistics_request(priv, CMD_ASYNC, false);
|
|
}
|
|
|
|
|
|
static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
|
|
u32 start_idx, u32 num_events,
|
|
u32 capacity, u32 mode)
|
|
{
|
|
u32 i;
|
|
u32 ptr; /* SRAM byte address of log data */
|
|
u32 ev, time, data; /* event log data */
|
|
unsigned long reg_flags;
|
|
|
|
if (mode == 0)
|
|
ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
|
|
else
|
|
ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
|
|
|
|
/* Make sure device is powered up for SRAM reads */
|
|
spin_lock_irqsave(&priv->trans->reg_lock, reg_flags);
|
|
if (unlikely(!iwl_grab_nic_access(priv->trans))) {
|
|
spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags);
|
|
return;
|
|
}
|
|
|
|
/* Set starting address; reads will auto-increment */
|
|
iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, ptr);
|
|
|
|
/*
|
|
* Refuse to read more than would have fit into the log from
|
|
* the current start_idx. This used to happen due to the race
|
|
* described below, but now WARN because the code below should
|
|
* prevent it from happening here.
|
|
*/
|
|
if (WARN_ON(num_events > capacity - start_idx))
|
|
num_events = capacity - start_idx;
|
|
|
|
/*
|
|
* "time" is actually "data" for mode 0 (no timestamp).
|
|
* place event id # at far right for easier visual parsing.
|
|
*/
|
|
for (i = 0; i < num_events; i++) {
|
|
ev = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
|
|
time = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
|
|
if (mode == 0) {
|
|
trace_iwlwifi_dev_ucode_cont_event(
|
|
priv->trans->dev, 0, time, ev);
|
|
} else {
|
|
data = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
|
|
trace_iwlwifi_dev_ucode_cont_event(
|
|
priv->trans->dev, time, data, ev);
|
|
}
|
|
}
|
|
/* Allow device to power down */
|
|
iwl_release_nic_access(priv->trans);
|
|
spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags);
|
|
}
|
|
|
|
static void iwl_continuous_event_trace(struct iwl_priv *priv)
|
|
{
|
|
u32 capacity; /* event log capacity in # entries */
|
|
struct {
|
|
u32 capacity;
|
|
u32 mode;
|
|
u32 wrap_counter;
|
|
u32 write_counter;
|
|
} __packed read;
|
|
u32 base; /* SRAM byte address of event log header */
|
|
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
|
|
u32 num_wraps; /* # times uCode wrapped to top of log */
|
|
u32 next_entry; /* index of next entry to be written by uCode */
|
|
|
|
base = priv->device_pointers.log_event_table;
|
|
if (iwlagn_hw_valid_rtc_data_addr(base)) {
|
|
iwl_read_targ_mem_words(priv->trans, base, &read, sizeof(read));
|
|
capacity = read.capacity;
|
|
mode = read.mode;
|
|
num_wraps = read.wrap_counter;
|
|
next_entry = read.write_counter;
|
|
} else
|
|
return;
|
|
|
|
/*
|
|
* Unfortunately, the uCode doesn't use temporary variables.
|
|
* Therefore, it can happen that we read next_entry == capacity,
|
|
* which really means next_entry == 0.
|
|
*/
|
|
if (unlikely(next_entry == capacity))
|
|
next_entry = 0;
|
|
/*
|
|
* Additionally, the uCode increases the write pointer before
|
|
* the wraps counter, so if the write pointer is smaller than
|
|
* the old write pointer (wrap occurred) but we read that no
|
|
* wrap occurred, we actually read between the next_entry and
|
|
* num_wraps update (this does happen in practice!!) -- take
|
|
* that into account by increasing num_wraps.
|
|
*/
|
|
if (unlikely(next_entry < priv->event_log.next_entry &&
|
|
num_wraps == priv->event_log.num_wraps))
|
|
num_wraps++;
|
|
|
|
if (num_wraps == priv->event_log.num_wraps) {
|
|
iwl_print_cont_event_trace(
|
|
priv, base, priv->event_log.next_entry,
|
|
next_entry - priv->event_log.next_entry,
|
|
capacity, mode);
|
|
|
|
priv->event_log.non_wraps_count++;
|
|
} else {
|
|
if (num_wraps - priv->event_log.num_wraps > 1)
|
|
priv->event_log.wraps_more_count++;
|
|
else
|
|
priv->event_log.wraps_once_count++;
|
|
|
|
trace_iwlwifi_dev_ucode_wrap_event(priv->trans->dev,
|
|
num_wraps - priv->event_log.num_wraps,
|
|
next_entry, priv->event_log.next_entry);
|
|
|
|
if (next_entry < priv->event_log.next_entry) {
|
|
iwl_print_cont_event_trace(
|
|
priv, base, priv->event_log.next_entry,
|
|
capacity - priv->event_log.next_entry,
|
|
capacity, mode);
|
|
|
|
iwl_print_cont_event_trace(
|
|
priv, base, 0, next_entry, capacity, mode);
|
|
} else {
|
|
iwl_print_cont_event_trace(
|
|
priv, base, next_entry,
|
|
capacity - next_entry,
|
|
capacity, mode);
|
|
|
|
iwl_print_cont_event_trace(
|
|
priv, base, 0, next_entry, capacity, mode);
|
|
}
|
|
}
|
|
|
|
priv->event_log.num_wraps = num_wraps;
|
|
priv->event_log.next_entry = next_entry;
|
|
}
|
|
|
|
/**
|
|
* iwl_bg_ucode_trace - Timer callback to log ucode event
|
|
*
|
|
* The timer is continually set to execute every
|
|
* UCODE_TRACE_PERIOD milliseconds after the last timer expired
|
|
* this function is to perform continuous uCode event logging operation
|
|
* if enabled
|
|
*/
|
|
static void iwl_bg_ucode_trace(unsigned long data)
|
|
{
|
|
struct iwl_priv *priv = (struct iwl_priv *)data;
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
if (priv->event_log.ucode_trace) {
|
|
iwl_continuous_event_trace(priv);
|
|
/* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
|
|
mod_timer(&priv->ucode_trace,
|
|
jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
|
|
}
|
|
}
|
|
|
|
static void iwl_bg_tx_flush(struct work_struct *work)
|
|
{
|
|
struct iwl_priv *priv =
|
|
container_of(work, struct iwl_priv, tx_flush);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
/* do nothing if rf-kill is on */
|
|
if (!iwl_is_ready_rf(priv))
|
|
return;
|
|
|
|
IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
|
|
iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
|
|
}
|
|
|
|
/*
|
|
* queue/FIFO/AC mapping definitions
|
|
*/
|
|
|
|
#define IWL_TX_FIFO_BK 0 /* shared */
|
|
#define IWL_TX_FIFO_BE 1
|
|
#define IWL_TX_FIFO_VI 2 /* shared */
|
|
#define IWL_TX_FIFO_VO 3
|
|
#define IWL_TX_FIFO_BK_IPAN IWL_TX_FIFO_BK
|
|
#define IWL_TX_FIFO_BE_IPAN 4
|
|
#define IWL_TX_FIFO_VI_IPAN IWL_TX_FIFO_VI
|
|
#define IWL_TX_FIFO_VO_IPAN 5
|
|
/* re-uses the VO FIFO, uCode will properly flush/schedule */
|
|
#define IWL_TX_FIFO_AUX 5
|
|
#define IWL_TX_FIFO_UNUSED -1
|
|
|
|
#define IWLAGN_CMD_FIFO_NUM 7
|
|
|
|
/*
|
|
* This queue number is required for proper operation
|
|
* because the ucode will stop/start the scheduler as
|
|
* required.
|
|
*/
|
|
#define IWL_IPAN_MCAST_QUEUE 8
|
|
|
|
static const u8 iwlagn_default_queue_to_tx_fifo[] = {
|
|
IWL_TX_FIFO_VO,
|
|
IWL_TX_FIFO_VI,
|
|
IWL_TX_FIFO_BE,
|
|
IWL_TX_FIFO_BK,
|
|
IWLAGN_CMD_FIFO_NUM,
|
|
};
|
|
|
|
static const u8 iwlagn_ipan_queue_to_tx_fifo[] = {
|
|
IWL_TX_FIFO_VO,
|
|
IWL_TX_FIFO_VI,
|
|
IWL_TX_FIFO_BE,
|
|
IWL_TX_FIFO_BK,
|
|
IWL_TX_FIFO_BK_IPAN,
|
|
IWL_TX_FIFO_BE_IPAN,
|
|
IWL_TX_FIFO_VI_IPAN,
|
|
IWL_TX_FIFO_VO_IPAN,
|
|
IWL_TX_FIFO_BE_IPAN,
|
|
IWLAGN_CMD_FIFO_NUM,
|
|
IWL_TX_FIFO_AUX,
|
|
};
|
|
|
|
static const u8 iwlagn_bss_ac_to_fifo[] = {
|
|
IWL_TX_FIFO_VO,
|
|
IWL_TX_FIFO_VI,
|
|
IWL_TX_FIFO_BE,
|
|
IWL_TX_FIFO_BK,
|
|
};
|
|
|
|
static const u8 iwlagn_bss_ac_to_queue[] = {
|
|
0, 1, 2, 3,
|
|
};
|
|
|
|
static const u8 iwlagn_pan_ac_to_fifo[] = {
|
|
IWL_TX_FIFO_VO_IPAN,
|
|
IWL_TX_FIFO_VI_IPAN,
|
|
IWL_TX_FIFO_BE_IPAN,
|
|
IWL_TX_FIFO_BK_IPAN,
|
|
};
|
|
|
|
static const u8 iwlagn_pan_ac_to_queue[] = {
|
|
7, 6, 5, 4,
|
|
};
|
|
|
|
void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* The default context is always valid,
|
|
* the PAN context depends on uCode.
|
|
*/
|
|
priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
|
|
if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN)
|
|
priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
|
|
|
|
for (i = 0; i < NUM_IWL_RXON_CTX; i++)
|
|
priv->contexts[i].ctxid = i;
|
|
|
|
priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
|
|
priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
|
|
priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
|
|
priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
|
|
priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
|
|
priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
|
|
priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
|
|
priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
|
|
priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
|
|
priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
|
|
BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MONITOR);
|
|
priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
|
|
BIT(NL80211_IFTYPE_STATION);
|
|
priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
|
|
priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
|
|
priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
|
|
priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
|
|
memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue,
|
|
iwlagn_bss_ac_to_queue, sizeof(iwlagn_bss_ac_to_queue));
|
|
memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo,
|
|
iwlagn_bss_ac_to_fifo, sizeof(iwlagn_bss_ac_to_fifo));
|
|
|
|
priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
|
|
priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
|
|
REPLY_WIPAN_RXON_TIMING;
|
|
priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
|
|
REPLY_WIPAN_RXON_ASSOC;
|
|
priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
|
|
priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
|
|
priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
|
|
priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
|
|
priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
|
|
priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
|
|
BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
|
|
|
|
if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P)
|
|
priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
|
|
BIT(NL80211_IFTYPE_P2P_CLIENT) |
|
|
BIT(NL80211_IFTYPE_P2P_GO);
|
|
|
|
priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
|
|
priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
|
|
priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
|
|
memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue,
|
|
iwlagn_pan_ac_to_queue, sizeof(iwlagn_pan_ac_to_queue));
|
|
memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo,
|
|
iwlagn_pan_ac_to_fifo, sizeof(iwlagn_pan_ac_to_fifo));
|
|
priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
|
|
|
|
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
|
|
}
|
|
|
|
void iwl_rf_kill_ct_config(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_ct_kill_config cmd;
|
|
struct iwl_ct_kill_throttling_config adv_cmd;
|
|
int ret = 0;
|
|
|
|
iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
|
|
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
|
|
|
|
priv->thermal_throttle.ct_kill_toggle = false;
|
|
|
|
if (priv->cfg->base_params->support_ct_kill_exit) {
|
|
adv_cmd.critical_temperature_enter =
|
|
cpu_to_le32(priv->hw_params.ct_kill_threshold);
|
|
adv_cmd.critical_temperature_exit =
|
|
cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
|
|
|
|
ret = iwl_dvm_send_cmd_pdu(priv,
|
|
REPLY_CT_KILL_CONFIG_CMD,
|
|
CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
|
|
if (ret)
|
|
IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
|
|
else
|
|
IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
|
|
"succeeded, critical temperature enter is %d,"
|
|
"exit is %d\n",
|
|
priv->hw_params.ct_kill_threshold,
|
|
priv->hw_params.ct_kill_exit_threshold);
|
|
} else {
|
|
cmd.critical_temperature_R =
|
|
cpu_to_le32(priv->hw_params.ct_kill_threshold);
|
|
|
|
ret = iwl_dvm_send_cmd_pdu(priv,
|
|
REPLY_CT_KILL_CONFIG_CMD,
|
|
CMD_SYNC, sizeof(cmd), &cmd);
|
|
if (ret)
|
|
IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
|
|
else
|
|
IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
|
|
"succeeded, "
|
|
"critical temperature is %d\n",
|
|
priv->hw_params.ct_kill_threshold);
|
|
}
|
|
}
|
|
|
|
static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
|
|
{
|
|
struct iwl_calib_cfg_cmd calib_cfg_cmd;
|
|
struct iwl_host_cmd cmd = {
|
|
.id = CALIBRATION_CFG_CMD,
|
|
.len = { sizeof(struct iwl_calib_cfg_cmd), },
|
|
.data = { &calib_cfg_cmd, },
|
|
};
|
|
|
|
memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
|
|
calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL;
|
|
calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
|
|
|
|
return iwl_dvm_send_cmd(priv, &cmd);
|
|
}
|
|
|
|
|
|
static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
|
|
{
|
|
struct iwl_tx_ant_config_cmd tx_ant_cmd = {
|
|
.valid = cpu_to_le32(valid_tx_ant),
|
|
};
|
|
|
|
if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) {
|
|
IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
|
|
return iwl_dvm_send_cmd_pdu(priv,
|
|
TX_ANT_CONFIGURATION_CMD,
|
|
CMD_SYNC,
|
|
sizeof(struct iwl_tx_ant_config_cmd),
|
|
&tx_ant_cmd);
|
|
} else {
|
|
IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
void iwl_send_bt_config(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_bt_cmd bt_cmd = {
|
|
.lead_time = BT_LEAD_TIME_DEF,
|
|
.max_kill = BT_MAX_KILL_DEF,
|
|
.kill_ack_mask = 0,
|
|
.kill_cts_mask = 0,
|
|
};
|
|
|
|
if (!iwlwifi_mod_params.bt_coex_active)
|
|
bt_cmd.flags = BT_COEX_DISABLE;
|
|
else
|
|
bt_cmd.flags = BT_COEX_ENABLE;
|
|
|
|
priv->bt_enable_flag = bt_cmd.flags;
|
|
IWL_DEBUG_INFO(priv, "BT coex %s\n",
|
|
(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
|
|
|
|
if (iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
|
|
CMD_SYNC, sizeof(struct iwl_bt_cmd), &bt_cmd))
|
|
IWL_ERR(priv, "failed to send BT Coex Config\n");
|
|
}
|
|
|
|
/**
|
|
* iwl_alive_start - called after REPLY_ALIVE notification received
|
|
* from protocol/runtime uCode (initialization uCode's
|
|
* Alive gets handled by iwl_init_alive_start()).
|
|
*/
|
|
int iwl_alive_start(struct iwl_priv *priv)
|
|
{
|
|
int ret = 0;
|
|
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
|
|
|
|
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
|
|
|
|
/* After the ALIVE response, we can send host commands to the uCode */
|
|
set_bit(STATUS_ALIVE, &priv->status);
|
|
|
|
if (iwl_is_rfkill(priv))
|
|
return -ERFKILL;
|
|
|
|
if (priv->event_log.ucode_trace) {
|
|
/* start collecting data now */
|
|
mod_timer(&priv->ucode_trace, jiffies);
|
|
}
|
|
|
|
/* download priority table before any calibration request */
|
|
if (priv->cfg->bt_params &&
|
|
priv->cfg->bt_params->advanced_bt_coexist) {
|
|
/* Configure Bluetooth device coexistence support */
|
|
if (priv->cfg->bt_params->bt_sco_disable)
|
|
priv->bt_enable_pspoll = false;
|
|
else
|
|
priv->bt_enable_pspoll = true;
|
|
|
|
priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
|
|
priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
|
|
priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
|
|
iwlagn_send_advance_bt_config(priv);
|
|
priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
|
|
priv->cur_rssi_ctx = NULL;
|
|
|
|
iwl_send_prio_tbl(priv);
|
|
|
|
/* FIXME: w/a to force change uCode BT state machine */
|
|
ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
|
|
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
|
|
if (ret)
|
|
return ret;
|
|
ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
|
|
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
/*
|
|
* default is 2-wire BT coexexistence support
|
|
*/
|
|
iwl_send_bt_config(priv);
|
|
}
|
|
|
|
/*
|
|
* Perform runtime calibrations, including DC calibration.
|
|
*/
|
|
iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX);
|
|
|
|
ieee80211_wake_queues(priv->hw);
|
|
|
|
/* Configure Tx antenna selection based on H/W config */
|
|
iwlagn_send_tx_ant_config(priv, priv->hw_params.valid_tx_ant);
|
|
|
|
if (iwl_is_associated_ctx(ctx) && !priv->wowlan) {
|
|
struct iwl_rxon_cmd *active_rxon =
|
|
(struct iwl_rxon_cmd *)&ctx->active;
|
|
/* apply any changes in staging */
|
|
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
|
|
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
} else {
|
|
struct iwl_rxon_context *tmp;
|
|
/* Initialize our rx_config data */
|
|
for_each_context(priv, tmp)
|
|
iwl_connection_init_rx_config(priv, tmp);
|
|
|
|
iwlagn_set_rxon_chain(priv, ctx);
|
|
}
|
|
|
|
if (!priv->wowlan) {
|
|
/* WoWLAN ucode will not reply in the same way, skip it */
|
|
iwl_reset_run_time_calib(priv);
|
|
}
|
|
|
|
set_bit(STATUS_READY, &priv->status);
|
|
|
|
/* Configure the adapter for unassociated operation */
|
|
ret = iwlagn_commit_rxon(priv, ctx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* At this point, the NIC is initialized and operational */
|
|
iwl_rf_kill_ct_config(priv);
|
|
|
|
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
|
|
|
|
return iwl_power_update_mode(priv, true);
|
|
}
|
|
|
|
/**
|
|
* iwl_clear_driver_stations - clear knowledge of all stations from driver
|
|
* @priv: iwl priv struct
|
|
*
|
|
* This is called during iwl_down() to make sure that in the case
|
|
* we're coming there from a hardware restart mac80211 will be
|
|
* able to reconfigure stations -- if we're getting there in the
|
|
* normal down flow then the stations will already be cleared.
|
|
*/
|
|
static void iwl_clear_driver_stations(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_rxon_context *ctx;
|
|
|
|
spin_lock_bh(&priv->sta_lock);
|
|
memset(priv->stations, 0, sizeof(priv->stations));
|
|
priv->num_stations = 0;
|
|
|
|
priv->ucode_key_table = 0;
|
|
|
|
for_each_context(priv, ctx) {
|
|
/*
|
|
* Remove all key information that is not stored as part
|
|
* of station information since mac80211 may not have had
|
|
* a chance to remove all the keys. When device is
|
|
* reconfigured by mac80211 after an error all keys will
|
|
* be reconfigured.
|
|
*/
|
|
memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys));
|
|
ctx->key_mapping_keys = 0;
|
|
}
|
|
|
|
spin_unlock_bh(&priv->sta_lock);
|
|
}
|
|
|
|
void iwl_down(struct iwl_priv *priv)
|
|
{
|
|
int exit_pending;
|
|
|
|
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
|
|
|
|
lockdep_assert_held(&priv->mutex);
|
|
|
|
iwl_scan_cancel_timeout(priv, 200);
|
|
|
|
/*
|
|
* If active, scanning won't cancel it, so say it expired.
|
|
* No race since we hold the mutex here and a new one
|
|
* can't come in at this time.
|
|
*/
|
|
ieee80211_remain_on_channel_expired(priv->hw);
|
|
|
|
exit_pending =
|
|
test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
|
|
iwl_clear_ucode_stations(priv, NULL);
|
|
iwl_dealloc_bcast_stations(priv);
|
|
iwl_clear_driver_stations(priv);
|
|
|
|
/* reset BT coex data */
|
|
priv->bt_status = 0;
|
|
priv->cur_rssi_ctx = NULL;
|
|
priv->bt_is_sco = 0;
|
|
if (priv->cfg->bt_params)
|
|
priv->bt_traffic_load =
|
|
priv->cfg->bt_params->bt_init_traffic_load;
|
|
else
|
|
priv->bt_traffic_load = 0;
|
|
priv->bt_full_concurrent = false;
|
|
priv->bt_ci_compliance = 0;
|
|
|
|
/* Wipe out the EXIT_PENDING status bit if we are not actually
|
|
* exiting the module */
|
|
if (!exit_pending)
|
|
clear_bit(STATUS_EXIT_PENDING, &priv->status);
|
|
|
|
if (priv->mac80211_registered)
|
|
ieee80211_stop_queues(priv->hw);
|
|
|
|
priv->ucode_loaded = false;
|
|
iwl_trans_stop_device(priv->trans);
|
|
|
|
/* Clear out all status bits but a few that are stable across reset */
|
|
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
|
|
STATUS_RF_KILL_HW |
|
|
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
|
|
STATUS_GEO_CONFIGURED |
|
|
test_bit(STATUS_FW_ERROR, &priv->status) <<
|
|
STATUS_FW_ERROR |
|
|
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
|
|
STATUS_EXIT_PENDING;
|
|
|
|
dev_kfree_skb(priv->beacon_skb);
|
|
priv->beacon_skb = NULL;
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* Workqueue callbacks
|
|
*
|
|
*****************************************************************************/
|
|
|
|
static void iwl_bg_run_time_calib_work(struct work_struct *work)
|
|
{
|
|
struct iwl_priv *priv = container_of(work, struct iwl_priv,
|
|
run_time_calib_work);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
|
|
test_bit(STATUS_SCANNING, &priv->status)) {
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
}
|
|
|
|
if (priv->start_calib) {
|
|
iwl_chain_noise_calibration(priv);
|
|
iwl_sensitivity_calibration(priv);
|
|
}
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
void iwlagn_prepare_restart(struct iwl_priv *priv)
|
|
{
|
|
bool bt_full_concurrent;
|
|
u8 bt_ci_compliance;
|
|
u8 bt_load;
|
|
u8 bt_status;
|
|
bool bt_is_sco;
|
|
int i;
|
|
|
|
lockdep_assert_held(&priv->mutex);
|
|
|
|
priv->is_open = 0;
|
|
|
|
/*
|
|
* __iwl_down() will clear the BT status variables,
|
|
* which is correct, but when we restart we really
|
|
* want to keep them so restore them afterwards.
|
|
*
|
|
* The restart process will later pick them up and
|
|
* re-configure the hw when we reconfigure the BT
|
|
* command.
|
|
*/
|
|
bt_full_concurrent = priv->bt_full_concurrent;
|
|
bt_ci_compliance = priv->bt_ci_compliance;
|
|
bt_load = priv->bt_traffic_load;
|
|
bt_status = priv->bt_status;
|
|
bt_is_sco = priv->bt_is_sco;
|
|
|
|
iwl_down(priv);
|
|
|
|
priv->bt_full_concurrent = bt_full_concurrent;
|
|
priv->bt_ci_compliance = bt_ci_compliance;
|
|
priv->bt_traffic_load = bt_load;
|
|
priv->bt_status = bt_status;
|
|
priv->bt_is_sco = bt_is_sco;
|
|
|
|
/* reset aggregation queues */
|
|
for (i = IWLAGN_FIRST_AMPDU_QUEUE; i < IWL_MAX_HW_QUEUES; i++)
|
|
priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
|
|
/* and stop counts */
|
|
for (i = 0; i < IWL_MAX_HW_QUEUES; i++)
|
|
atomic_set(&priv->queue_stop_count[i], 0);
|
|
|
|
memset(priv->agg_q_alloc, 0, sizeof(priv->agg_q_alloc));
|
|
}
|
|
|
|
static void iwl_bg_restart(struct work_struct *data)
|
|
{
|
|
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
|
|
mutex_lock(&priv->mutex);
|
|
iwlagn_prepare_restart(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
iwl_cancel_deferred_work(priv);
|
|
ieee80211_restart_hw(priv->hw);
|
|
} else {
|
|
WARN_ON(1);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
void iwlagn_disable_roc(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
|
|
|
|
lockdep_assert_held(&priv->mutex);
|
|
|
|
if (!priv->hw_roc_setup)
|
|
return;
|
|
|
|
ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
|
|
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
|
|
|
|
priv->hw_roc_channel = NULL;
|
|
|
|
memset(ctx->staging.node_addr, 0, ETH_ALEN);
|
|
|
|
iwlagn_commit_rxon(priv, ctx);
|
|
|
|
ctx->is_active = false;
|
|
priv->hw_roc_setup = false;
|
|
}
|
|
|
|
static void iwlagn_disable_roc_work(struct work_struct *work)
|
|
{
|
|
struct iwl_priv *priv = container_of(work, struct iwl_priv,
|
|
hw_roc_disable_work.work);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
iwlagn_disable_roc(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* driver setup and teardown
|
|
*
|
|
*****************************************************************************/
|
|
|
|
void iwl_setup_deferred_work(struct iwl_priv *priv)
|
|
{
|
|
priv->workqueue = create_singlethread_workqueue(DRV_NAME);
|
|
|
|
INIT_WORK(&priv->restart, iwl_bg_restart);
|
|
INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
|
|
INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
|
|
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
|
|
INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
|
|
INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
|
|
INIT_DELAYED_WORK(&priv->hw_roc_disable_work,
|
|
iwlagn_disable_roc_work);
|
|
|
|
iwl_setup_scan_deferred_work(priv);
|
|
|
|
if (priv->cfg->bt_params)
|
|
iwlagn_bt_setup_deferred_work(priv);
|
|
|
|
init_timer(&priv->statistics_periodic);
|
|
priv->statistics_periodic.data = (unsigned long)priv;
|
|
priv->statistics_periodic.function = iwl_bg_statistics_periodic;
|
|
|
|
init_timer(&priv->ucode_trace);
|
|
priv->ucode_trace.data = (unsigned long)priv;
|
|
priv->ucode_trace.function = iwl_bg_ucode_trace;
|
|
}
|
|
|
|
void iwl_cancel_deferred_work(struct iwl_priv *priv)
|
|
{
|
|
if (priv->cfg->bt_params)
|
|
iwlagn_bt_cancel_deferred_work(priv);
|
|
|
|
cancel_work_sync(&priv->run_time_calib_work);
|
|
cancel_work_sync(&priv->beacon_update);
|
|
|
|
iwl_cancel_scan_deferred_work(priv);
|
|
|
|
cancel_work_sync(&priv->bt_full_concurrency);
|
|
cancel_work_sync(&priv->bt_runtime_config);
|
|
cancel_delayed_work_sync(&priv->hw_roc_disable_work);
|
|
|
|
del_timer_sync(&priv->statistics_periodic);
|
|
del_timer_sync(&priv->ucode_trace);
|
|
}
|
|
|
|
static void iwl_init_hw_rates(struct ieee80211_rate *rates)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
|
|
rates[i].bitrate = iwl_rates[i].ieee * 5;
|
|
rates[i].hw_value = i; /* Rate scaling will work on indexes */
|
|
rates[i].hw_value_short = i;
|
|
rates[i].flags = 0;
|
|
if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
|
|
/*
|
|
* If CCK != 1M then set short preamble rate flag.
|
|
*/
|
|
rates[i].flags |=
|
|
(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
|
|
0 : IEEE80211_RATE_SHORT_PREAMBLE;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
|
|
#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
|
|
static void iwl_init_ht_hw_capab(const struct iwl_priv *priv,
|
|
struct ieee80211_sta_ht_cap *ht_info,
|
|
enum ieee80211_band band)
|
|
{
|
|
u16 max_bit_rate = 0;
|
|
u8 rx_chains_num = priv->hw_params.rx_chains_num;
|
|
u8 tx_chains_num = priv->hw_params.tx_chains_num;
|
|
|
|
ht_info->cap = 0;
|
|
memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
|
|
|
|
ht_info->ht_supported = true;
|
|
|
|
if (priv->cfg->ht_params &&
|
|
priv->cfg->ht_params->ht_greenfield_support)
|
|
ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
|
|
ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
|
|
max_bit_rate = MAX_BIT_RATE_20_MHZ;
|
|
if (priv->hw_params.ht40_channel & BIT(band)) {
|
|
ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
|
|
ht_info->mcs.rx_mask[4] = 0x01;
|
|
max_bit_rate = MAX_BIT_RATE_40_MHZ;
|
|
}
|
|
|
|
if (iwlwifi_mod_params.amsdu_size_8K)
|
|
ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
|
|
|
|
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
|
|
ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
|
|
|
|
ht_info->mcs.rx_mask[0] = 0xFF;
|
|
if (rx_chains_num >= 2)
|
|
ht_info->mcs.rx_mask[1] = 0xFF;
|
|
if (rx_chains_num >= 3)
|
|
ht_info->mcs.rx_mask[2] = 0xFF;
|
|
|
|
/* Highest supported Rx data rate */
|
|
max_bit_rate *= rx_chains_num;
|
|
WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
|
|
ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
|
|
|
|
/* Tx MCS capabilities */
|
|
ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
if (tx_chains_num != rx_chains_num) {
|
|
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
|
|
ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
|
|
IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl_init_geos - Initialize mac80211's geo/channel info based from eeprom
|
|
*/
|
|
static int iwl_init_geos(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_channel_info *ch;
|
|
struct ieee80211_supported_band *sband;
|
|
struct ieee80211_channel *channels;
|
|
struct ieee80211_channel *geo_ch;
|
|
struct ieee80211_rate *rates;
|
|
int i = 0;
|
|
s8 max_tx_power = IWLAGN_TX_POWER_TARGET_POWER_MIN;
|
|
|
|
if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
|
|
priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
|
|
IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n");
|
|
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
|
|
return 0;
|
|
}
|
|
|
|
channels = kcalloc(priv->channel_count,
|
|
sizeof(struct ieee80211_channel), GFP_KERNEL);
|
|
if (!channels)
|
|
return -ENOMEM;
|
|
|
|
rates = kcalloc(IWL_RATE_COUNT_LEGACY, sizeof(struct ieee80211_rate),
|
|
GFP_KERNEL);
|
|
if (!rates) {
|
|
kfree(channels);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* 5.2GHz channels start after the 2.4GHz channels */
|
|
sband = &priv->bands[IEEE80211_BAND_5GHZ];
|
|
sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
|
|
/* just OFDM */
|
|
sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
|
|
sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE;
|
|
|
|
if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)
|
|
iwl_init_ht_hw_capab(priv, &sband->ht_cap,
|
|
IEEE80211_BAND_5GHZ);
|
|
|
|
sband = &priv->bands[IEEE80211_BAND_2GHZ];
|
|
sband->channels = channels;
|
|
/* OFDM & CCK */
|
|
sband->bitrates = rates;
|
|
sband->n_bitrates = IWL_RATE_COUNT_LEGACY;
|
|
|
|
if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)
|
|
iwl_init_ht_hw_capab(priv, &sband->ht_cap,
|
|
IEEE80211_BAND_2GHZ);
|
|
|
|
priv->ieee_channels = channels;
|
|
priv->ieee_rates = rates;
|
|
|
|
for (i = 0; i < priv->channel_count; i++) {
|
|
ch = &priv->channel_info[i];
|
|
|
|
/* FIXME: might be removed if scan is OK */
|
|
if (!is_channel_valid(ch))
|
|
continue;
|
|
|
|
sband = &priv->bands[ch->band];
|
|
|
|
geo_ch = &sband->channels[sband->n_channels++];
|
|
|
|
geo_ch->center_freq =
|
|
ieee80211_channel_to_frequency(ch->channel, ch->band);
|
|
geo_ch->max_power = ch->max_power_avg;
|
|
geo_ch->max_antenna_gain = 0xff;
|
|
geo_ch->hw_value = ch->channel;
|
|
|
|
if (is_channel_valid(ch)) {
|
|
if (!(ch->flags & EEPROM_CHANNEL_IBSS))
|
|
geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
|
|
|
|
if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
|
|
geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
|
|
|
|
if (ch->flags & EEPROM_CHANNEL_RADAR)
|
|
geo_ch->flags |= IEEE80211_CHAN_RADAR;
|
|
|
|
geo_ch->flags |= ch->ht40_extension_channel;
|
|
|
|
if (ch->max_power_avg > max_tx_power)
|
|
max_tx_power = ch->max_power_avg;
|
|
} else {
|
|
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
|
|
}
|
|
|
|
IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
|
|
ch->channel, geo_ch->center_freq,
|
|
is_channel_a_band(ch) ? "5.2" : "2.4",
|
|
geo_ch->flags & IEEE80211_CHAN_DISABLED ?
|
|
"restricted" : "valid",
|
|
geo_ch->flags);
|
|
}
|
|
|
|
priv->tx_power_device_lmt = max_tx_power;
|
|
priv->tx_power_user_lmt = max_tx_power;
|
|
priv->tx_power_next = max_tx_power;
|
|
|
|
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
|
|
priv->hw_params.sku & EEPROM_SKU_CAP_BAND_52GHZ) {
|
|
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
|
|
"Please send your %s to maintainer.\n",
|
|
priv->trans->hw_id_str);
|
|
priv->hw_params.sku &= ~EEPROM_SKU_CAP_BAND_52GHZ;
|
|
}
|
|
|
|
if (iwlwifi_mod_params.disable_5ghz)
|
|
priv->bands[IEEE80211_BAND_5GHZ].n_channels = 0;
|
|
|
|
IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
|
|
priv->bands[IEEE80211_BAND_2GHZ].n_channels,
|
|
priv->bands[IEEE80211_BAND_5GHZ].n_channels);
|
|
|
|
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* iwl_free_geos - undo allocations in iwl_init_geos
|
|
*/
|
|
static void iwl_free_geos(struct iwl_priv *priv)
|
|
{
|
|
kfree(priv->ieee_channels);
|
|
kfree(priv->ieee_rates);
|
|
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
|
|
}
|
|
|
|
int iwl_init_drv(struct iwl_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
spin_lock_init(&priv->sta_lock);
|
|
|
|
mutex_init(&priv->mutex);
|
|
|
|
INIT_LIST_HEAD(&priv->calib_results);
|
|
|
|
priv->ieee_channels = NULL;
|
|
priv->ieee_rates = NULL;
|
|
priv->band = IEEE80211_BAND_2GHZ;
|
|
|
|
priv->plcp_delta_threshold =
|
|
priv->cfg->base_params->plcp_delta_threshold;
|
|
|
|
priv->iw_mode = NL80211_IFTYPE_STATION;
|
|
priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
|
|
priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
|
|
priv->agg_tids_count = 0;
|
|
|
|
priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
|
|
|
|
priv->rx_statistics_jiffies = jiffies;
|
|
|
|
/* Choose which receivers/antennas to use */
|
|
iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
|
|
|
|
iwl_init_scan_params(priv);
|
|
|
|
/* init bt coex */
|
|
if (priv->cfg->bt_params &&
|
|
priv->cfg->bt_params->advanced_bt_coexist) {
|
|
priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
|
|
priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
|
|
priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
|
|
priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
|
|
priv->bt_duration = BT_DURATION_LIMIT_DEF;
|
|
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
|
|
}
|
|
|
|
ret = iwl_init_channel_map(priv);
|
|
if (ret) {
|
|
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = iwl_init_geos(priv);
|
|
if (ret) {
|
|
IWL_ERR(priv, "initializing geos failed: %d\n", ret);
|
|
goto err_free_channel_map;
|
|
}
|
|
iwl_init_hw_rates(priv->ieee_rates);
|
|
|
|
return 0;
|
|
|
|
err_free_channel_map:
|
|
iwl_free_channel_map(priv);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
void iwl_uninit_drv(struct iwl_priv *priv)
|
|
{
|
|
iwl_free_geos(priv);
|
|
iwl_free_channel_map(priv);
|
|
kfree(priv->scan_cmd);
|
|
kfree(priv->beacon_cmd);
|
|
kfree(rcu_dereference_raw(priv->noa_data));
|
|
iwl_calib_free_results(priv);
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
kfree(priv->wowlan_sram);
|
|
#endif
|
|
}
|
|
|
|
void iwl_set_hw_params(struct iwl_priv *priv)
|
|
{
|
|
if (priv->cfg->ht_params)
|
|
priv->hw_params.use_rts_for_aggregation =
|
|
priv->cfg->ht_params->use_rts_for_aggregation;
|
|
|
|
if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
|
|
priv->hw_params.sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
|
|
|
|
/* Device-specific setup */
|
|
priv->lib->set_hw_params(priv);
|
|
}
|
|
|
|
|
|
|
|
/* show what optional capabilities we have */
|
|
void iwl_option_config(struct iwl_priv *priv)
|
|
{
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n");
|
|
#else
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG disabled\n");
|
|
#endif
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS enabled\n");
|
|
#else
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS disabled\n");
|
|
#endif
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEVICE_TRACING
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING enabled\n");
|
|
#else
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING disabled\n");
|
|
#endif
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE enabled\n");
|
|
#else
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE disabled\n");
|
|
#endif
|
|
|
|
#ifdef CONFIG_IWLWIFI_P2P
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_P2P enabled\n");
|
|
#else
|
|
IWL_INFO(priv, "CONFIG_IWLWIFI_P2P disabled\n");
|
|
#endif
|
|
}
|
|
|
|
static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
|
|
const struct iwl_cfg *cfg,
|
|
const struct iwl_fw *fw)
|
|
{
|
|
struct iwl_priv *priv;
|
|
struct ieee80211_hw *hw;
|
|
struct iwl_op_mode *op_mode;
|
|
u16 num_mac;
|
|
u32 ucode_flags;
|
|
struct iwl_trans_config trans_cfg;
|
|
static const u8 no_reclaim_cmds[] = {
|
|
REPLY_RX_PHY_CMD,
|
|
REPLY_RX,
|
|
REPLY_RX_MPDU_CMD,
|
|
REPLY_COMPRESSED_BA,
|
|
STATISTICS_NOTIFICATION,
|
|
REPLY_TX,
|
|
};
|
|
int i;
|
|
|
|
/************************
|
|
* 1. Allocating HW data
|
|
************************/
|
|
hw = iwl_alloc_all();
|
|
if (!hw) {
|
|
pr_err("%s: Cannot allocate network device\n", cfg->name);
|
|
goto out;
|
|
}
|
|
|
|
op_mode = hw->priv;
|
|
op_mode->ops = &iwl_dvm_ops;
|
|
priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
priv->trans = trans;
|
|
priv->dev = trans->dev;
|
|
priv->cfg = cfg;
|
|
priv->fw = fw;
|
|
|
|
switch (priv->cfg->device_family) {
|
|
case IWL_DEVICE_FAMILY_1000:
|
|
case IWL_DEVICE_FAMILY_100:
|
|
priv->lib = &iwl1000_lib;
|
|
break;
|
|
case IWL_DEVICE_FAMILY_2000:
|
|
case IWL_DEVICE_FAMILY_105:
|
|
priv->lib = &iwl2000_lib;
|
|
break;
|
|
case IWL_DEVICE_FAMILY_2030:
|
|
case IWL_DEVICE_FAMILY_135:
|
|
priv->lib = &iwl2030_lib;
|
|
break;
|
|
case IWL_DEVICE_FAMILY_5000:
|
|
priv->lib = &iwl5000_lib;
|
|
break;
|
|
case IWL_DEVICE_FAMILY_5150:
|
|
priv->lib = &iwl5150_lib;
|
|
break;
|
|
case IWL_DEVICE_FAMILY_6000:
|
|
case IWL_DEVICE_FAMILY_6005:
|
|
case IWL_DEVICE_FAMILY_6000i:
|
|
case IWL_DEVICE_FAMILY_6050:
|
|
case IWL_DEVICE_FAMILY_6150:
|
|
priv->lib = &iwl6000_lib;
|
|
break;
|
|
case IWL_DEVICE_FAMILY_6030:
|
|
priv->lib = &iwl6030_lib;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (WARN_ON(!priv->lib))
|
|
goto out_free_hw;
|
|
|
|
/*
|
|
* Populate the state variables that the transport layer needs
|
|
* to know about.
|
|
*/
|
|
trans_cfg.op_mode = op_mode;
|
|
trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
|
|
trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
|
|
trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
|
|
if (!iwlwifi_mod_params.wd_disable)
|
|
trans_cfg.queue_watchdog_timeout =
|
|
priv->cfg->base_params->wd_timeout;
|
|
else
|
|
trans_cfg.queue_watchdog_timeout = IWL_WATCHHDOG_DISABLED;
|
|
trans_cfg.command_names = iwl_dvm_cmd_strings;
|
|
|
|
ucode_flags = fw->ucode_capa.flags;
|
|
|
|
#ifndef CONFIG_IWLWIFI_P2P
|
|
ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
|
|
#endif
|
|
|
|
if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) {
|
|
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
|
|
trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
|
|
trans_cfg.queue_to_fifo = iwlagn_ipan_queue_to_tx_fifo;
|
|
trans_cfg.n_queue_to_fifo =
|
|
ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo);
|
|
} else {
|
|
priv->sta_key_max_num = STA_KEY_MAX_NUM;
|
|
trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
|
|
trans_cfg.queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
|
|
trans_cfg.n_queue_to_fifo =
|
|
ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
|
|
}
|
|
|
|
/* Configure transport layer */
|
|
iwl_trans_configure(priv->trans, &trans_cfg);
|
|
|
|
/* At this point both hw and priv are allocated. */
|
|
|
|
SET_IEEE80211_DEV(priv->hw, priv->trans->dev);
|
|
|
|
iwl_option_config(priv);
|
|
|
|
IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
|
|
|
|
/* is antenna coupling more than 35dB ? */
|
|
priv->bt_ant_couple_ok =
|
|
(iwlwifi_mod_params.ant_coupling >
|
|
IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
|
|
true : false;
|
|
|
|
/* enable/disable bt channel inhibition */
|
|
priv->bt_ch_announce = iwlwifi_mod_params.bt_ch_announce;
|
|
IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
|
|
(priv->bt_ch_announce) ? "On" : "Off");
|
|
|
|
/* these spin locks will be used in apm_ops.init and EEPROM access
|
|
* we should init now
|
|
*/
|
|
spin_lock_init(&priv->statistics.lock);
|
|
|
|
/***********************
|
|
* 2. Read REV register
|
|
***********************/
|
|
IWL_INFO(priv, "Detected %s, REV=0x%X\n",
|
|
priv->cfg->name, priv->trans->hw_rev);
|
|
|
|
if (iwl_trans_start_hw(priv->trans))
|
|
goto out_free_hw;
|
|
|
|
/* Read the EEPROM */
|
|
if (iwl_eeprom_init(priv, priv->trans->hw_rev)) {
|
|
IWL_ERR(priv, "Unable to init EEPROM\n");
|
|
goto out_free_hw;
|
|
}
|
|
/* Reset chip to save power until we load uCode during "up". */
|
|
iwl_trans_stop_hw(priv->trans, false);
|
|
|
|
if (iwl_eeprom_check_version(priv))
|
|
goto out_free_eeprom;
|
|
|
|
if (iwl_eeprom_init_hw_params(priv))
|
|
goto out_free_eeprom;
|
|
|
|
/* extract MAC Address */
|
|
iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
|
|
IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
|
|
priv->hw->wiphy->addresses = priv->addresses;
|
|
priv->hw->wiphy->n_addresses = 1;
|
|
num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
|
|
if (num_mac > 1) {
|
|
memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
|
|
ETH_ALEN);
|
|
priv->addresses[1].addr[5]++;
|
|
priv->hw->wiphy->n_addresses++;
|
|
}
|
|
|
|
/************************
|
|
* 4. Setup HW constants
|
|
************************/
|
|
iwl_set_hw_params(priv);
|
|
|
|
if (!(priv->hw_params.sku & EEPROM_SKU_CAP_IPAN_ENABLE)) {
|
|
IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN");
|
|
ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
|
|
/*
|
|
* if not PAN, then don't support P2P -- might be a uCode
|
|
* packaging bug or due to the eeprom check above
|
|
*/
|
|
ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
|
|
priv->sta_key_max_num = STA_KEY_MAX_NUM;
|
|
trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
|
|
trans_cfg.queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
|
|
trans_cfg.n_queue_to_fifo =
|
|
ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
|
|
|
|
/* Configure transport layer again*/
|
|
iwl_trans_configure(priv->trans, &trans_cfg);
|
|
}
|
|
|
|
/*******************
|
|
* 5. Setup priv
|
|
*******************/
|
|
for (i = 0; i < IWL_MAX_HW_QUEUES; i++) {
|
|
priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
|
|
if (i < IWLAGN_FIRST_AMPDU_QUEUE &&
|
|
i != IWL_DEFAULT_CMD_QUEUE_NUM &&
|
|
i != IWL_IPAN_CMD_QUEUE_NUM)
|
|
priv->queue_to_mac80211[i] = i;
|
|
atomic_set(&priv->queue_stop_count[i], 0);
|
|
}
|
|
|
|
WARN_ON(trans_cfg.queue_to_fifo[trans_cfg.cmd_queue] !=
|
|
IWLAGN_CMD_FIFO_NUM);
|
|
|
|
if (iwl_init_drv(priv))
|
|
goto out_free_eeprom;
|
|
|
|
/* At this point both hw and priv are initialized. */
|
|
|
|
/********************
|
|
* 6. Setup services
|
|
********************/
|
|
iwl_setup_deferred_work(priv);
|
|
iwl_setup_rx_handlers(priv);
|
|
iwl_testmode_init(priv);
|
|
|
|
iwl_power_initialize(priv);
|
|
iwl_tt_initialize(priv);
|
|
|
|
snprintf(priv->hw->wiphy->fw_version,
|
|
sizeof(priv->hw->wiphy->fw_version),
|
|
"%s", fw->fw_version);
|
|
|
|
priv->new_scan_threshold_behaviour =
|
|
!!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
|
|
|
|
priv->phy_calib_chain_noise_reset_cmd =
|
|
fw->ucode_capa.standard_phy_calibration_size;
|
|
priv->phy_calib_chain_noise_gain_cmd =
|
|
fw->ucode_capa.standard_phy_calibration_size + 1;
|
|
|
|
/* initialize all valid contexts */
|
|
iwl_init_context(priv, ucode_flags);
|
|
|
|
/**************************************************
|
|
* This is still part of probe() in a sense...
|
|
*
|
|
* 7. Setup and register with mac80211 and debugfs
|
|
**************************************************/
|
|
if (iwlagn_mac_setup_register(priv, &fw->ucode_capa))
|
|
goto out_destroy_workqueue;
|
|
|
|
if (iwl_dbgfs_register(priv, DRV_NAME))
|
|
IWL_ERR(priv,
|
|
"failed to create debugfs files. Ignoring error\n");
|
|
|
|
return op_mode;
|
|
|
|
out_destroy_workqueue:
|
|
destroy_workqueue(priv->workqueue);
|
|
priv->workqueue = NULL;
|
|
iwl_uninit_drv(priv);
|
|
out_free_eeprom:
|
|
iwl_eeprom_free(priv);
|
|
out_free_hw:
|
|
ieee80211_free_hw(priv->hw);
|
|
out:
|
|
op_mode = NULL;
|
|
return op_mode;
|
|
}
|
|
|
|
void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
|
|
IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
|
|
|
|
iwl_dbgfs_unregister(priv);
|
|
|
|
iwl_testmode_cleanup(priv);
|
|
iwlagn_mac_unregister(priv);
|
|
|
|
iwl_tt_exit(priv);
|
|
|
|
/*This will stop the queues, move the device to low power state */
|
|
priv->ucode_loaded = false;
|
|
iwl_trans_stop_device(priv->trans);
|
|
|
|
iwl_eeprom_free(priv);
|
|
|
|
/*netif_stop_queue(dev); */
|
|
flush_workqueue(priv->workqueue);
|
|
|
|
/* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
|
|
* priv->workqueue... so we can't take down the workqueue
|
|
* until now... */
|
|
destroy_workqueue(priv->workqueue);
|
|
priv->workqueue = NULL;
|
|
|
|
iwl_uninit_drv(priv);
|
|
|
|
dev_kfree_skb(priv->beacon_skb);
|
|
|
|
iwl_trans_stop_hw(priv->trans, true);
|
|
ieee80211_free_hw(priv->hw);
|
|
}
|
|
|
|
static const char * const desc_lookup_text[] = {
|
|
"OK",
|
|
"FAIL",
|
|
"BAD_PARAM",
|
|
"BAD_CHECKSUM",
|
|
"NMI_INTERRUPT_WDG",
|
|
"SYSASSERT",
|
|
"FATAL_ERROR",
|
|
"BAD_COMMAND",
|
|
"HW_ERROR_TUNE_LOCK",
|
|
"HW_ERROR_TEMPERATURE",
|
|
"ILLEGAL_CHAN_FREQ",
|
|
"VCC_NOT_STABLE",
|
|
"FH_ERROR",
|
|
"NMI_INTERRUPT_HOST",
|
|
"NMI_INTERRUPT_ACTION_PT",
|
|
"NMI_INTERRUPT_UNKNOWN",
|
|
"UCODE_VERSION_MISMATCH",
|
|
"HW_ERROR_ABS_LOCK",
|
|
"HW_ERROR_CAL_LOCK_FAIL",
|
|
"NMI_INTERRUPT_INST_ACTION_PT",
|
|
"NMI_INTERRUPT_DATA_ACTION_PT",
|
|
"NMI_TRM_HW_ER",
|
|
"NMI_INTERRUPT_TRM",
|
|
"NMI_INTERRUPT_BREAK_POINT",
|
|
"DEBUG_0",
|
|
"DEBUG_1",
|
|
"DEBUG_2",
|
|
"DEBUG_3",
|
|
};
|
|
|
|
static struct { char *name; u8 num; } advanced_lookup[] = {
|
|
{ "NMI_INTERRUPT_WDG", 0x34 },
|
|
{ "SYSASSERT", 0x35 },
|
|
{ "UCODE_VERSION_MISMATCH", 0x37 },
|
|
{ "BAD_COMMAND", 0x38 },
|
|
{ "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
|
|
{ "FATAL_ERROR", 0x3D },
|
|
{ "NMI_TRM_HW_ERR", 0x46 },
|
|
{ "NMI_INTERRUPT_TRM", 0x4C },
|
|
{ "NMI_INTERRUPT_BREAK_POINT", 0x54 },
|
|
{ "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
|
|
{ "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
|
|
{ "NMI_INTERRUPT_HOST", 0x66 },
|
|
{ "NMI_INTERRUPT_ACTION_PT", 0x7C },
|
|
{ "NMI_INTERRUPT_UNKNOWN", 0x84 },
|
|
{ "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
|
|
{ "ADVANCED_SYSASSERT", 0 },
|
|
};
|
|
|
|
static const char *desc_lookup(u32 num)
|
|
{
|
|
int i;
|
|
int max = ARRAY_SIZE(desc_lookup_text);
|
|
|
|
if (num < max)
|
|
return desc_lookup_text[num];
|
|
|
|
max = ARRAY_SIZE(advanced_lookup) - 1;
|
|
for (i = 0; i < max; i++) {
|
|
if (advanced_lookup[i].num == num)
|
|
break;
|
|
}
|
|
return advanced_lookup[i].name;
|
|
}
|
|
|
|
#define ERROR_START_OFFSET (1 * sizeof(u32))
|
|
#define ERROR_ELEM_SIZE (7 * sizeof(u32))
|
|
|
|
static void iwl_dump_nic_error_log(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_trans *trans = priv->trans;
|
|
u32 base;
|
|
struct iwl_error_event_table table;
|
|
|
|
base = priv->device_pointers.error_event_table;
|
|
if (priv->cur_ucode == IWL_UCODE_INIT) {
|
|
if (!base)
|
|
base = priv->fw->init_errlog_ptr;
|
|
} else {
|
|
if (!base)
|
|
base = priv->fw->inst_errlog_ptr;
|
|
}
|
|
|
|
if (!iwlagn_hw_valid_rtc_data_addr(base)) {
|
|
IWL_ERR(priv,
|
|
"Not valid error log pointer 0x%08X for %s uCode\n",
|
|
base,
|
|
(priv->cur_ucode == IWL_UCODE_INIT)
|
|
? "Init" : "RT");
|
|
return;
|
|
}
|
|
|
|
/*TODO: Update dbgfs with ISR error stats obtained below */
|
|
iwl_read_targ_mem_words(trans, base, &table, sizeof(table));
|
|
|
|
if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
|
|
IWL_ERR(trans, "Start IWL Error Log Dump:\n");
|
|
IWL_ERR(trans, "Status: 0x%08lX, count: %d\n",
|
|
priv->status, table.valid);
|
|
}
|
|
|
|
trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low,
|
|
table.data1, table.data2, table.line,
|
|
table.blink1, table.blink2, table.ilink1,
|
|
table.ilink2, table.bcon_time, table.gp1,
|
|
table.gp2, table.gp3, table.ucode_ver,
|
|
table.hw_ver, table.brd_ver);
|
|
IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id,
|
|
desc_lookup(table.error_id));
|
|
IWL_ERR(priv, "0x%08X | uPc\n", table.pc);
|
|
IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1);
|
|
IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2);
|
|
IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1);
|
|
IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2);
|
|
IWL_ERR(priv, "0x%08X | data1\n", table.data1);
|
|
IWL_ERR(priv, "0x%08X | data2\n", table.data2);
|
|
IWL_ERR(priv, "0x%08X | line\n", table.line);
|
|
IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time);
|
|
IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low);
|
|
IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi);
|
|
IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1);
|
|
IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2);
|
|
IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3);
|
|
IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver);
|
|
IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver);
|
|
IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver);
|
|
IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd);
|
|
IWL_ERR(priv, "0x%08X | isr0\n", table.isr0);
|
|
IWL_ERR(priv, "0x%08X | isr1\n", table.isr1);
|
|
IWL_ERR(priv, "0x%08X | isr2\n", table.isr2);
|
|
IWL_ERR(priv, "0x%08X | isr3\n", table.isr3);
|
|
IWL_ERR(priv, "0x%08X | isr4\n", table.isr4);
|
|
IWL_ERR(priv, "0x%08X | isr_pref\n", table.isr_pref);
|
|
IWL_ERR(priv, "0x%08X | wait_event\n", table.wait_event);
|
|
IWL_ERR(priv, "0x%08X | l2p_control\n", table.l2p_control);
|
|
IWL_ERR(priv, "0x%08X | l2p_duration\n", table.l2p_duration);
|
|
IWL_ERR(priv, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid);
|
|
IWL_ERR(priv, "0x%08X | l2p_addr_match\n", table.l2p_addr_match);
|
|
IWL_ERR(priv, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel);
|
|
IWL_ERR(priv, "0x%08X | timestamp\n", table.u_timestamp);
|
|
IWL_ERR(priv, "0x%08X | flow_handler\n", table.flow_handler);
|
|
}
|
|
|
|
#define EVENT_START_OFFSET (4 * sizeof(u32))
|
|
|
|
/**
|
|
* iwl_print_event_log - Dump error event log to syslog
|
|
*
|
|
*/
|
|
static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
|
|
u32 num_events, u32 mode,
|
|
int pos, char **buf, size_t bufsz)
|
|
{
|
|
u32 i;
|
|
u32 base; /* SRAM byte address of event log header */
|
|
u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
|
|
u32 ptr; /* SRAM byte address of log data */
|
|
u32 ev, time, data; /* event log data */
|
|
unsigned long reg_flags;
|
|
|
|
struct iwl_trans *trans = priv->trans;
|
|
|
|
if (num_events == 0)
|
|
return pos;
|
|
|
|
base = priv->device_pointers.log_event_table;
|
|
if (priv->cur_ucode == IWL_UCODE_INIT) {
|
|
if (!base)
|
|
base = priv->fw->init_evtlog_ptr;
|
|
} else {
|
|
if (!base)
|
|
base = priv->fw->inst_evtlog_ptr;
|
|
}
|
|
|
|
if (mode == 0)
|
|
event_size = 2 * sizeof(u32);
|
|
else
|
|
event_size = 3 * sizeof(u32);
|
|
|
|
ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
|
|
|
|
/* Make sure device is powered up for SRAM reads */
|
|
spin_lock_irqsave(&trans->reg_lock, reg_flags);
|
|
if (unlikely(!iwl_grab_nic_access(trans)))
|
|
goto out_unlock;
|
|
|
|
/* Set starting address; reads will auto-increment */
|
|
iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr);
|
|
|
|
/* "time" is actually "data" for mode 0 (no timestamp).
|
|
* place event id # at far right for easier visual parsing. */
|
|
for (i = 0; i < num_events; i++) {
|
|
ev = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
|
|
time = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
|
|
if (mode == 0) {
|
|
/* data, ev */
|
|
if (bufsz) {
|
|
pos += scnprintf(*buf + pos, bufsz - pos,
|
|
"EVT_LOG:0x%08x:%04u\n",
|
|
time, ev);
|
|
} else {
|
|
trace_iwlwifi_dev_ucode_event(trans->dev, 0,
|
|
time, ev);
|
|
IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
|
|
time, ev);
|
|
}
|
|
} else {
|
|
data = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
|
|
if (bufsz) {
|
|
pos += scnprintf(*buf + pos, bufsz - pos,
|
|
"EVT_LOGT:%010u:0x%08x:%04u\n",
|
|
time, data, ev);
|
|
} else {
|
|
IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
|
|
time, data, ev);
|
|
trace_iwlwifi_dev_ucode_event(trans->dev, time,
|
|
data, ev);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Allow device to power down */
|
|
iwl_release_nic_access(trans);
|
|
out_unlock:
|
|
spin_unlock_irqrestore(&trans->reg_lock, reg_flags);
|
|
return pos;
|
|
}
|
|
|
|
/**
|
|
* iwl_print_last_event_logs - Dump the newest # of event log to syslog
|
|
*/
|
|
static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
|
|
u32 num_wraps, u32 next_entry,
|
|
u32 size, u32 mode,
|
|
int pos, char **buf, size_t bufsz)
|
|
{
|
|
/*
|
|
* display the newest DEFAULT_LOG_ENTRIES entries
|
|
* i.e the entries just before the next ont that uCode would fill.
|
|
*/
|
|
if (num_wraps) {
|
|
if (next_entry < size) {
|
|
pos = iwl_print_event_log(priv,
|
|
capacity - (size - next_entry),
|
|
size - next_entry, mode,
|
|
pos, buf, bufsz);
|
|
pos = iwl_print_event_log(priv, 0,
|
|
next_entry, mode,
|
|
pos, buf, bufsz);
|
|
} else
|
|
pos = iwl_print_event_log(priv, next_entry - size,
|
|
size, mode, pos, buf, bufsz);
|
|
} else {
|
|
if (next_entry < size) {
|
|
pos = iwl_print_event_log(priv, 0, next_entry,
|
|
mode, pos, buf, bufsz);
|
|
} else {
|
|
pos = iwl_print_event_log(priv, next_entry - size,
|
|
size, mode, pos, buf, bufsz);
|
|
}
|
|
}
|
|
return pos;
|
|
}
|
|
|
|
#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
|
|
|
|
int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
|
|
char **buf, bool display)
|
|
{
|
|
u32 base; /* SRAM byte address of event log header */
|
|
u32 capacity; /* event log capacity in # entries */
|
|
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
|
|
u32 num_wraps; /* # times uCode wrapped to top of log */
|
|
u32 next_entry; /* index of next entry to be written by uCode */
|
|
u32 size; /* # entries that we'll print */
|
|
u32 logsize;
|
|
int pos = 0;
|
|
size_t bufsz = 0;
|
|
struct iwl_trans *trans = priv->trans;
|
|
|
|
base = priv->device_pointers.log_event_table;
|
|
if (priv->cur_ucode == IWL_UCODE_INIT) {
|
|
logsize = priv->fw->init_evtlog_size;
|
|
if (!base)
|
|
base = priv->fw->init_evtlog_ptr;
|
|
} else {
|
|
logsize = priv->fw->inst_evtlog_size;
|
|
if (!base)
|
|
base = priv->fw->inst_evtlog_ptr;
|
|
}
|
|
|
|
if (!iwlagn_hw_valid_rtc_data_addr(base)) {
|
|
IWL_ERR(priv,
|
|
"Invalid event log pointer 0x%08X for %s uCode\n",
|
|
base,
|
|
(priv->cur_ucode == IWL_UCODE_INIT)
|
|
? "Init" : "RT");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* event log header */
|
|
capacity = iwl_read_targ_mem(trans, base);
|
|
mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32)));
|
|
num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32)));
|
|
next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32)));
|
|
|
|
if (capacity > logsize) {
|
|
IWL_ERR(priv, "Log capacity %d is bogus, limit to %d "
|
|
"entries\n", capacity, logsize);
|
|
capacity = logsize;
|
|
}
|
|
|
|
if (next_entry > logsize) {
|
|
IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
|
|
next_entry, logsize);
|
|
next_entry = logsize;
|
|
}
|
|
|
|
size = num_wraps ? capacity : next_entry;
|
|
|
|
/* bail out if nothing in log */
|
|
if (size == 0) {
|
|
IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n");
|
|
return pos;
|
|
}
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log)
|
|
size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
|
|
? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
|
|
#else
|
|
size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
|
|
? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
|
|
#endif
|
|
IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
|
|
size);
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
if (display) {
|
|
if (full_log)
|
|
bufsz = capacity * 48;
|
|
else
|
|
bufsz = size * 48;
|
|
*buf = kmalloc(bufsz, GFP_KERNEL);
|
|
if (!*buf)
|
|
return -ENOMEM;
|
|
}
|
|
if (iwl_have_debug_level(IWL_DL_FW_ERRORS) || full_log) {
|
|
/*
|
|
* if uCode has wrapped back to top of log,
|
|
* start at the oldest entry,
|
|
* i.e the next one that uCode would fill.
|
|
*/
|
|
if (num_wraps)
|
|
pos = iwl_print_event_log(priv, next_entry,
|
|
capacity - next_entry, mode,
|
|
pos, buf, bufsz);
|
|
/* (then/else) start at top of log */
|
|
pos = iwl_print_event_log(priv, 0,
|
|
next_entry, mode, pos, buf, bufsz);
|
|
} else
|
|
pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
|
|
next_entry, size, mode,
|
|
pos, buf, bufsz);
|
|
#else
|
|
pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
|
|
next_entry, size, mode,
|
|
pos, buf, bufsz);
|
|
#endif
|
|
return pos;
|
|
}
|
|
|
|
static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand)
|
|
{
|
|
unsigned int reload_msec;
|
|
unsigned long reload_jiffies;
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
if (iwl_have_debug_level(IWL_DL_FW_ERRORS))
|
|
iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS);
|
|
#endif
|
|
|
|
/* uCode is no longer loaded. */
|
|
priv->ucode_loaded = false;
|
|
|
|
/* Set the FW error flag -- cleared on iwl_down */
|
|
set_bit(STATUS_FW_ERROR, &priv->status);
|
|
|
|
iwl_abort_notification_waits(&priv->notif_wait);
|
|
|
|
/* Keep the restart process from trying to send host
|
|
* commands by clearing the ready bit */
|
|
clear_bit(STATUS_READY, &priv->status);
|
|
|
|
wake_up(&priv->trans->wait_command_queue);
|
|
|
|
if (!ondemand) {
|
|
/*
|
|
* If firmware keep reloading, then it indicate something
|
|
* serious wrong and firmware having problem to recover
|
|
* from it. Instead of keep trying which will fill the syslog
|
|
* and hang the system, let's just stop it
|
|
*/
|
|
reload_jiffies = jiffies;
|
|
reload_msec = jiffies_to_msecs((long) reload_jiffies -
|
|
(long) priv->reload_jiffies);
|
|
priv->reload_jiffies = reload_jiffies;
|
|
if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
|
|
priv->reload_count++;
|
|
if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
|
|
IWL_ERR(priv, "BUG_ON, Stop restarting\n");
|
|
return;
|
|
}
|
|
} else
|
|
priv->reload_count = 0;
|
|
}
|
|
|
|
if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
|
|
if (iwlwifi_mod_params.restart_fw) {
|
|
IWL_DEBUG_FW_ERRORS(priv,
|
|
"Restarting adapter due to uCode error.\n");
|
|
queue_work(priv->workqueue, &priv->restart);
|
|
} else
|
|
IWL_DEBUG_FW_ERRORS(priv,
|
|
"Detected FW error, but not restarting\n");
|
|
}
|
|
}
|
|
|
|
void iwl_nic_error(struct iwl_op_mode *op_mode)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
|
|
IWL_ERR(priv, "Loaded firmware version: %s\n",
|
|
priv->fw->fw_version);
|
|
|
|
iwl_dump_nic_error_log(priv);
|
|
iwl_dump_nic_event_log(priv, false, NULL, false);
|
|
|
|
iwlagn_fw_error(priv, false);
|
|
}
|
|
|
|
void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
|
|
if (!iwl_check_for_ct_kill(priv)) {
|
|
IWL_ERR(priv, "Restarting adapter queue is full\n");
|
|
iwlagn_fw_error(priv, false);
|
|
}
|
|
}
|
|
|
|
void iwl_nic_config(struct iwl_op_mode *op_mode)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
|
|
priv->lib->nic_config(priv);
|
|
}
|
|
|
|
static void iwl_wimax_active(struct iwl_op_mode *op_mode)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
|
|
clear_bit(STATUS_READY, &priv->status);
|
|
IWL_ERR(priv, "RF is used by WiMAX\n");
|
|
}
|
|
|
|
void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
int mq = priv->queue_to_mac80211[queue];
|
|
|
|
if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE))
|
|
return;
|
|
|
|
if (atomic_inc_return(&priv->queue_stop_count[mq]) > 1) {
|
|
IWL_DEBUG_TX_QUEUES(priv,
|
|
"queue %d (mac80211 %d) already stopped\n",
|
|
queue, mq);
|
|
return;
|
|
}
|
|
|
|
set_bit(mq, &priv->transport_queue_stop);
|
|
ieee80211_stop_queue(priv->hw, mq);
|
|
}
|
|
|
|
void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
int mq = priv->queue_to_mac80211[queue];
|
|
|
|
if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE))
|
|
return;
|
|
|
|
if (atomic_dec_return(&priv->queue_stop_count[mq]) > 0) {
|
|
IWL_DEBUG_TX_QUEUES(priv,
|
|
"queue %d (mac80211 %d) already awake\n",
|
|
queue, mq);
|
|
return;
|
|
}
|
|
|
|
clear_bit(mq, &priv->transport_queue_stop);
|
|
|
|
if (!priv->passive_no_rx)
|
|
ieee80211_wake_queue(priv->hw, mq);
|
|
}
|
|
|
|
void iwlagn_lift_passive_no_rx(struct iwl_priv *priv)
|
|
{
|
|
int mq;
|
|
|
|
if (!priv->passive_no_rx)
|
|
return;
|
|
|
|
for (mq = 0; mq < IWLAGN_FIRST_AMPDU_QUEUE; mq++) {
|
|
if (!test_bit(mq, &priv->transport_queue_stop)) {
|
|
IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d", mq);
|
|
ieee80211_wake_queue(priv->hw, mq);
|
|
} else {
|
|
IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d", mq);
|
|
}
|
|
}
|
|
|
|
priv->passive_no_rx = false;
|
|
}
|
|
|
|
void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_tx_info *info;
|
|
|
|
info = IEEE80211_SKB_CB(skb);
|
|
kmem_cache_free(iwl_tx_cmd_pool, (info->driver_data[1]));
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
|
|
{
|
|
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
|
|
|
|
if (state)
|
|
set_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
else
|
|
clear_bit(STATUS_RF_KILL_HW, &priv->status);
|
|
|
|
wiphy_rfkill_set_hw_state(priv->hw->wiphy, state);
|
|
}
|
|
|
|
const struct iwl_op_mode_ops iwl_dvm_ops = {
|
|
.start = iwl_op_mode_dvm_start,
|
|
.stop = iwl_op_mode_dvm_stop,
|
|
.rx = iwl_rx_dispatch,
|
|
.queue_full = iwl_stop_sw_queue,
|
|
.queue_not_full = iwl_wake_sw_queue,
|
|
.hw_rf_kill = iwl_set_hw_rfkill_state,
|
|
.free_skb = iwl_free_skb,
|
|
.nic_error = iwl_nic_error,
|
|
.cmd_queue_full = iwl_cmd_queue_full,
|
|
.nic_config = iwl_nic_config,
|
|
.wimax_active = iwl_wimax_active,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* driver and module entry point
|
|
*
|
|
*****************************************************************************/
|
|
|
|
struct kmem_cache *iwl_tx_cmd_pool;
|
|
|
|
static int __init iwl_init(void)
|
|
{
|
|
|
|
int ret;
|
|
pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
|
|
pr_info(DRV_COPYRIGHT "\n");
|
|
|
|
iwl_tx_cmd_pool = kmem_cache_create("iwl_dev_cmd",
|
|
sizeof(struct iwl_device_cmd),
|
|
sizeof(void *), 0, NULL);
|
|
if (!iwl_tx_cmd_pool)
|
|
return -ENOMEM;
|
|
|
|
ret = iwlagn_rate_control_register();
|
|
if (ret) {
|
|
pr_err("Unable to register rate control algorithm: %d\n", ret);
|
|
goto error_rc_register;
|
|
}
|
|
|
|
ret = iwl_pci_register_driver();
|
|
if (ret)
|
|
goto error_pci_register;
|
|
return ret;
|
|
|
|
error_pci_register:
|
|
iwlagn_rate_control_unregister();
|
|
error_rc_register:
|
|
kmem_cache_destroy(iwl_tx_cmd_pool);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit iwl_exit(void)
|
|
{
|
|
iwl_pci_unregister_driver();
|
|
iwlagn_rate_control_unregister();
|
|
kmem_cache_destroy(iwl_tx_cmd_pool);
|
|
}
|
|
|
|
module_exit(iwl_exit);
|
|
module_init(iwl_init);
|