korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-28 21:45:01 +08:00
Code Issues Packages Projects Releases Wiki Activity
7cb1b0887f
linux/drivers/net/wireless/iwlwifi/iwl-6000.c
Wey-Yi Guy 7cb1b0887f iwlagn: reduce redundant parameter definitions 
move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure.  this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas.  the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06 08:10:00 -07:00

817 lines
26 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-sta.h"
#include "iwl-agn.h"
#include "iwl-helpers.h"
#include "iwl-agn-hw.h"
#include "iwl-6000-hw.h"
#include "iwl-agn-led.h"
#include "iwl-agn-debugfs.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 5
#define IWL6000G2_UCODE_API_MAX 5
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
#define IWL6000G2_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
#define IWL6050_FW_PRE "iwlwifi-6050-"
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
#define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
#define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
#define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
#define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
static void iwl6050_additional_nic_config(struct iwl_priv *priv)
{
/* Indicate calibration version to uCode. */
if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
}
static void iwl6050g2_additional_nic_config(struct iwl_priv *priv)
{
/* Indicate calibration version to uCode. */
if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_6050_1x2);
}
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
u16 radio_cfg;
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
/* no locking required for register write */
if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
/* 2x2 IPA phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
/* do additional nic configuration if needed */
if (priv->cfg->ops->nic &&
priv->cfg->ops->nic->additional_nic_config) {
priv->cfg->ops->nic->additional_nic_config(priv);
}
}
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 80,
.auto_corr_min_ofdm_mrc = 128,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 192,
.auto_corr_max_ofdm = 145,
.auto_corr_max_ofdm_mrc = 232,
.auto_corr_max_ofdm_x1 = 110,
.auto_corr_max_ofdm_mrc_x1 = 232,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 175,
.auto_corr_min_cck_mrc = 160,
.auto_corr_max_cck_mrc = 310,
.nrg_th_cck = 97,
.nrg_th_ofdm = 100,
.barker_corr_th_min = 190,
.barker_corr_th_min_mrc = 390,
.nrg_th_cca = 62,
};
static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
priv->cfg->base_params->num_of_queues =
priv->cfg->mod_params->num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
priv->hw_params.scd_bc_tbls_size =
priv->cfg->base_params->num_of_queues *
sizeof(struct iwlagn_scd_bc_tbl);
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
/* Set initial sensitivity parameters */
/* Set initial calibration set */
priv->hw_params.sens = &iwl6000_sensitivity;
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_XTAL) |
BIT(IWL_CALIB_LO) |
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
if (priv->cfg->need_dc_calib)
priv->hw_params.calib_rt_cfg |= BIT(IWL_CALIB_CFG_DC_IDX);
priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
return 0;
}
static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch)
{
/*
* MULTI-FIXME
* See iwl_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl6000_channel_switch_cmd cmd;
const struct iwl_channel_info *ch_info;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
u8 switch_count;
u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
struct ieee80211_vif *vif = ctx->vif;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
.len = sizeof(cmd),
.flags = CMD_SYNC,
.data = &cmd,
};
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
ch = ch_switch->channel->hw_value;
IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
ctx->active.channel, ch);
cmd.channel = cpu_to_le16(ch);
cmd.rxon_flags = ctx->staging.flags;
cmd.rxon_filter_flags = ctx->staging.filter_flags;
switch_count = ch_switch->count;
tsf_low = ch_switch->timestamp & 0x0ffffffff;
/*
* calculate the ucode channel switch time
* adding TSF as one of the factor for when to switch
*/
if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
beacon_interval)) {
switch_count -= (priv->ucode_beacon_time -
tsf_low) / beacon_interval;
} else
switch_count = 0;
}
if (switch_count <= 1)
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
else {
switch_time_in_usec =
vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
ucode_switch_time = iwl_usecs_to_beacons(priv,
switch_time_in_usec,
beacon_interval);
cmd.switch_time = iwl_add_beacon_time(priv,
priv->ucode_beacon_time,
ucode_switch_time,
beacon_interval);
}
IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
cmd.switch_time);
ch_info = iwl_get_channel_info(priv, priv->band, ch);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else {
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
ctx->active.channel, ch);
return -EFAULT;
}
priv->switch_rxon.channel = cmd.channel;
priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
static struct iwl_lib_ops iwl6000_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
.txq_agg_enable = iwlagn_txq_agg_enable,
.txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.load_ucode = iwlagn_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.dump_csr = iwl_dump_csr,
.dump_fh = iwl_dump_fh,
.init_alive_start = iwlagn_init_alive_start,
.alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
EEPROM_REG_BAND_2_CHANNELS,
EEPROM_REG_BAND_3_CHANNELS,
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwlagn_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
},
.manage_ibss_station = iwlagn_manage_ibss_station,
.update_bcast_stations = iwl_update_bcast_stations,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.general_stats_read = iwl_ucode_general_stats_read,
.bt_stats_read = iwl_ucode_bt_stats_read,
.reply_tx_error = iwl_reply_tx_error_read,
},
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
.tt_ops = {
.lower_power_detection = iwl_tt_is_low_power_state,
.tt_power_mode = iwl_tt_current_power_mode,
.ct_kill_check = iwl_check_for_ct_kill,
}
};
static struct iwl_lib_ops iwl6000g2b_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,
.txq_agg_enable = iwlagn_txq_agg_enable,
.txq_agg_disable = iwlagn_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwlagn_bt_rx_handler_setup,
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.load_ucode = iwlagn_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.dump_csr = iwl_dump_csr,
.dump_fh = iwl_dump_fh,
.init_alive_start = iwlagn_init_alive_start,
.alive_notify = iwlagn_alive_notify,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REG_BAND_1_CHANNELS,
EEPROM_REG_BAND_2_CHANNELS,
EEPROM_REG_BAND_3_CHANNELS,
EEPROM_REG_BAND_4_CHANNELS,
EEPROM_REG_BAND_5_CHANNELS,
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwlagn_eeprom_calib_version,
.query_addr = iwlagn_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwlagn_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
},
.manage_ibss_station = iwlagn_manage_ibss_station,
.update_bcast_stations = iwl_update_bcast_stations,
.debugfs_ops = {
.rx_stats_read = iwl_ucode_rx_stats_read,
.tx_stats_read = iwl_ucode_tx_stats_read,
.general_stats_read = iwl_ucode_general_stats_read,
.bt_stats_read = iwl_ucode_bt_stats_read,
.reply_tx_error = iwl_reply_tx_error_read,
},
.recover_from_tx_stall = iwl_bg_monitor_recover,
.check_plcp_health = iwl_good_plcp_health,
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
.tt_ops = {
.lower_power_detection = iwl_tt_is_low_power_state,
.tt_power_mode = iwl_tt_current_power_mode,
.ct_kill_check = iwl_check_for_ct_kill,
}
};
static struct iwl_nic_ops iwl6050_nic_ops = {
.additional_nic_config = &iwl6050_additional_nic_config,
};
static struct iwl_nic_ops iwl6050g2_nic_ops = {
.additional_nic_config = &iwl6050g2_additional_nic_config,
};
static const struct iwl_ops iwl6000_ops = {
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
};
static const struct iwl_ops iwl6050_ops = {
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
.nic = &iwl6050_nic_ops,
};
static const struct iwl_ops iwl6050g2_ops = {
.lib = &iwl6000_lib,
.hcmd = &iwlagn_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
.nic = &iwl6050g2_nic_ops,
};
static const struct iwl_ops iwl6000g2b_ops = {
.lib = &iwl6000g2b_lib,
.hcmd = &iwlagn_bt_hcmd,
.utils = &iwlagn_hcmd_utils,
.led = &iwlagn_led_ops,
};
static struct iwl_base_params iwl6000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1000,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 512,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
static struct iwl_base_params iwl6050_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
.chain_noise_scale = 1500,
.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
.max_event_log_size = 1024,
.ucode_tracing = true,
.sensitivity_calib_by_driver = true,
.chain_noise_calib_by_driver = true,
};
static struct iwl_ht_params iwl6000_ht_params = {
.ht_greenfield_support = true,
.use_rts_for_aggregation = true, /* use rts/cts protection */
};
static struct iwl_bt_params iwl6000_bt_params = {
.bt_statistics = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.advanced_bt_coexist = true,
.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
};
struct iwl_cfg iwl6000g2a_2agn_cfg = {
.name = "6000 Series 2x2 AGN Gen2a",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000g2a_2abg_cfg = {
.name = "6000 Series 2x2 ABG Gen2a",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000g2a_2bg_cfg = {
.name = "6000 Series 2x2 BG Gen2a",
.fw_name_pre = IWL6000G2A_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000g2b_2agn_cfg = {
.name = "6000 Series 2x2 AGN Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.bt_params = &iwl6000_bt_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6000g2b_2abg_cfg = {
.name = "6000 Series 2x2 ABG Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6000g2b_2bgn_cfg = {
.name = "6000 Series 2x2 BGN Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.bt_params = &iwl6000_bt_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6000g2b_2bg_cfg = {
.name = "6000 Series 2x2 BG Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6000g2b_bgn_cfg = {
.name = "6000 Series 1x2 BGN Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.bt_params = &iwl6000_bt_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
struct iwl_cfg iwl6000g2b_bg_cfg = {
.name = "6000 Series 1x2 BG Gen2b",
.fw_name_pre = IWL6000G2B_FW_PRE,
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
.sku = IWL_SKU_G,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
.ops = &iwl6000g2b_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.bt_params = &iwl6000_bt_params,
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.pa_type = IWL_PA_INTERNAL,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_G,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.pa_type = IWL_PA_INTERNAL,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.ops = &iwl6000_ops,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
};
struct iwl_cfg iwl6050g2_bgn_cfg = {
.name = "6050 Series 1x2 BGN Gen2",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
.ops = &iwl6050g2_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
.ops = &iwl6050_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6050_base_params,
.need_dc_calib = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.ops = &iwl6000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
Reference in New Issue View Git Blame Copy Permalink