mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-30 22:44:50 +08:00
379c9a24cc
Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.
clk: failed to reparent uart1 to sys_pll1_80m: -16
Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.
When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.
Fixes: 9461f7b33d ("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
238 lines
13 KiB
C
238 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2009 by Sascha Hauer, Pengutronix
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
|
|
#include "clk.h"
|
|
|
|
#define CCM_MPCTL 0x00
|
|
#define CCM_UPCTL 0x04
|
|
#define CCM_CCTL 0x08
|
|
#define CCM_CGCR0 0x0C
|
|
#define CCM_CGCR1 0x10
|
|
#define CCM_CGCR2 0x14
|
|
#define CCM_PCDR0 0x18
|
|
#define CCM_PCDR1 0x1C
|
|
#define CCM_PCDR2 0x20
|
|
#define CCM_PCDR3 0x24
|
|
#define CCM_RCSR 0x28
|
|
#define CCM_CRDR 0x2C
|
|
#define CCM_DCVR0 0x30
|
|
#define CCM_DCVR1 0x34
|
|
#define CCM_DCVR2 0x38
|
|
#define CCM_DCVR3 0x3c
|
|
#define CCM_LTR0 0x40
|
|
#define CCM_LTR1 0x44
|
|
#define CCM_LTR2 0x48
|
|
#define CCM_LTR3 0x4c
|
|
#define CCM_MCR 0x64
|
|
|
|
#define ccm(x) (ccm_base + (x))
|
|
|
|
static struct clk_onecell_data clk_data;
|
|
|
|
static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
|
|
static const char *per_sel_clks[] = { "ahb", "upll", };
|
|
static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb",
|
|
"ipg", "dummy", "dummy", "dummy",
|
|
"dummy", "dummy", "per0", "per2",
|
|
"per13", "per14", "usbotg_ahb", "dummy",};
|
|
|
|
enum mx25_clks {
|
|
dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
|
|
per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
|
|
per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
|
|
per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
|
|
per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
|
|
csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
|
|
gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
|
|
pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
|
|
uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
|
|
esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
|
|
reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg,
|
|
cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
|
|
reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
|
|
gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
|
|
iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
|
|
pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
|
|
sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
|
|
uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
|
|
wdt_ipg, cko_div, cko_sel, cko, clk_max
|
|
};
|
|
|
|
static struct clk *clk[clk_max];
|
|
|
|
static int __init __mx25_clocks_init(void __iomem *ccm_base)
|
|
{
|
|
BUG_ON(!ccm_base);
|
|
|
|
clk[dummy] = imx_clk_fixed("dummy", 0);
|
|
clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "mpll", "osc", ccm(CCM_MPCTL));
|
|
clk[upll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "upll", "osc", ccm(CCM_UPCTL));
|
|
clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
|
|
clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
|
|
clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
|
|
clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
|
|
clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6);
|
|
clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
|
|
clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
|
|
clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6);
|
|
clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks));
|
|
clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30);
|
|
clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
|
|
clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
|
|
clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
|
|
clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
|
|
clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
|
|
clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
|
|
clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
|
|
clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
|
|
clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
|
|
clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
|
|
clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
|
|
clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
|
|
clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
|
|
clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
|
|
clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
|
|
clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
|
|
clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
|
|
clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1);
|
|
clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2);
|
|
clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
|
|
clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
|
|
clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
|
|
clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
|
|
clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
|
|
clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
|
|
clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9);
|
|
clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10);
|
|
clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11);
|
|
clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12);
|
|
clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
|
|
clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
|
|
clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
|
|
clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
|
|
/* CCM_CGCR0(17): reserved */
|
|
clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
|
|
clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
|
|
clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
|
|
clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
|
|
clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
|
|
clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
|
|
clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
|
|
clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
|
|
clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
|
|
clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
|
|
clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
|
|
/* CCM_CGCR0(29-31): reserved */
|
|
/* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
|
|
clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
|
|
clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
|
|
clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
|
|
clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1), 5);
|
|
clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
|
|
clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
|
|
clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
|
|
clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9);
|
|
clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10);
|
|
clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11);
|
|
/* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
|
|
clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
|
|
clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
|
|
clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
|
|
/* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
|
|
/* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
|
|
/* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
|
|
clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
|
|
clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
|
|
clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
|
|
clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
|
|
/* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
|
|
/* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
|
|
/* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
|
|
clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
|
|
/* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
|
|
/* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
|
|
clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
|
|
clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
|
|
/* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
|
|
clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
|
|
clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
|
|
clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
|
|
clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
|
|
clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3);
|
|
/* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
|
|
clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5);
|
|
clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
|
|
clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7);
|
|
clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8);
|
|
clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9);
|
|
clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10);
|
|
clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
|
|
clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
|
|
clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
|
|
clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
|
|
clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
|
|
clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
|
|
clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
|
|
clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
|
|
/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
|
|
clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
|
|
|
|
imx_check_clocks(clk, ARRAY_SIZE(clk));
|
|
|
|
clk_prepare_enable(clk[emi_ahb]);
|
|
|
|
/* Clock source for gpt must be derived from AHB */
|
|
clk_set_parent(clk[per5_sel], clk[ahb]);
|
|
|
|
/*
|
|
* Let's initially set up CLKO parent as ipg, since this configuration
|
|
* is used on some imx25 board designs to clock the audio codec.
|
|
*/
|
|
clk_set_parent(clk[cko_sel], clk[ipg]);
|
|
|
|
imx_register_uart_clocks(6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init mx25_clocks_init_dt(struct device_node *np)
|
|
{
|
|
void __iomem *ccm;
|
|
|
|
ccm = of_iomap(np, 0);
|
|
__mx25_clocks_init(ccm);
|
|
|
|
clk_data.clks = clk;
|
|
clk_data.clk_num = ARRAY_SIZE(clk);
|
|
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
|
|
}
|
|
CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
|