mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 18:14:48 +08:00
54da5a8be3
phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes:9a9c56cb34
("net: phy: fix a bug when verify the EEE support") Fixes:3e7077067e
("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1208 lines
30 KiB
C
1208 lines
30 KiB
C
/* Framework for configuring and reading PHY devices
|
|
* Based on code in sungem_phy.c and gianfar_phy.c
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
* Copyright (c) 2006, 2007 Maciej W. Rozycki
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/atomic.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
static const char *phy_speed_to_str(int speed)
|
|
{
|
|
switch (speed) {
|
|
case SPEED_10:
|
|
return "10Mbps";
|
|
case SPEED_100:
|
|
return "100Mbps";
|
|
case SPEED_1000:
|
|
return "1Gbps";
|
|
case SPEED_2500:
|
|
return "2.5Gbps";
|
|
case SPEED_10000:
|
|
return "10Gbps";
|
|
case SPEED_UNKNOWN:
|
|
return "Unknown";
|
|
default:
|
|
return "Unsupported (update phy.c)";
|
|
}
|
|
}
|
|
|
|
/**
|
|
* phy_print_status - Convenience function to print out the current phy status
|
|
* @phydev: the phy_device struct
|
|
*/
|
|
void phy_print_status(struct phy_device *phydev)
|
|
{
|
|
if (phydev->link) {
|
|
netdev_info(phydev->attached_dev,
|
|
"Link is Up - %s/%s - flow control %s\n",
|
|
phy_speed_to_str(phydev->speed),
|
|
DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
|
|
phydev->pause ? "rx/tx" : "off");
|
|
} else {
|
|
netdev_info(phydev->attached_dev, "Link is Down\n");
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(phy_print_status);
|
|
|
|
/**
|
|
* phy_clear_interrupt - Ack the phy device's interrupt
|
|
* @phydev: the phy_device struct
|
|
*
|
|
* If the @phydev driver has an ack_interrupt function, call it to
|
|
* ack and clear the phy device's interrupt.
|
|
*
|
|
* Returns 0 on success or < 0 on error.
|
|
*/
|
|
static int phy_clear_interrupt(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->ack_interrupt)
|
|
return phydev->drv->ack_interrupt(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* phy_config_interrupt - configure the PHY device for the requested interrupts
|
|
* @phydev: the phy_device struct
|
|
* @interrupts: interrupt flags to configure for this @phydev
|
|
*
|
|
* Returns 0 on success or < 0 on error.
|
|
*/
|
|
static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
|
|
{
|
|
phydev->interrupts = interrupts;
|
|
if (phydev->drv->config_intr)
|
|
return phydev->drv->config_intr(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* phy_aneg_done - return auto-negotiation status
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Return the auto-negotiation status from this @phydev
|
|
* Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
|
|
* is still pending.
|
|
*/
|
|
static inline int phy_aneg_done(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->aneg_done)
|
|
return phydev->drv->aneg_done(phydev);
|
|
|
|
return genphy_aneg_done(phydev);
|
|
}
|
|
|
|
/* A structure for mapping a particular speed and duplex
|
|
* combination to a particular SUPPORTED and ADVERTISED value
|
|
*/
|
|
struct phy_setting {
|
|
int speed;
|
|
int duplex;
|
|
u32 setting;
|
|
};
|
|
|
|
/* A mapping of all SUPPORTED settings to speed/duplex */
|
|
static const struct phy_setting settings[] = {
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_10000baseKR_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_10000baseKX4_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_10000baseT_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_2500,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_2500baseX_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_1000baseKX_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_1000baseT_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_HALF,
|
|
.setting = SUPPORTED_1000baseT_Half,
|
|
},
|
|
{
|
|
.speed = SPEED_100,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_100baseT_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_100,
|
|
.duplex = DUPLEX_HALF,
|
|
.setting = SUPPORTED_100baseT_Half,
|
|
},
|
|
{
|
|
.speed = SPEED_10,
|
|
.duplex = DUPLEX_FULL,
|
|
.setting = SUPPORTED_10baseT_Full,
|
|
},
|
|
{
|
|
.speed = SPEED_10,
|
|
.duplex = DUPLEX_HALF,
|
|
.setting = SUPPORTED_10baseT_Half,
|
|
},
|
|
};
|
|
|
|
#define MAX_NUM_SETTINGS ARRAY_SIZE(settings)
|
|
|
|
/**
|
|
* phy_find_setting - find a PHY settings array entry that matches speed & duplex
|
|
* @speed: speed to match
|
|
* @duplex: duplex to match
|
|
*
|
|
* Description: Searches the settings array for the setting which
|
|
* matches the desired speed and duplex, and returns the index
|
|
* of that setting. Returns the index of the last setting if
|
|
* none of the others match.
|
|
*/
|
|
static inline unsigned int phy_find_setting(int speed, int duplex)
|
|
{
|
|
unsigned int idx = 0;
|
|
|
|
while (idx < ARRAY_SIZE(settings) &&
|
|
(settings[idx].speed != speed || settings[idx].duplex != duplex))
|
|
idx++;
|
|
|
|
return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
|
|
}
|
|
|
|
/**
|
|
* phy_find_valid - find a PHY setting that matches the requested features mask
|
|
* @idx: The first index in settings[] to search
|
|
* @features: A mask of the valid settings
|
|
*
|
|
* Description: Returns the index of the first valid setting less
|
|
* than or equal to the one pointed to by idx, as determined by
|
|
* the mask in features. Returns the index of the last setting
|
|
* if nothing else matches.
|
|
*/
|
|
static inline unsigned int phy_find_valid(unsigned int idx, u32 features)
|
|
{
|
|
while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
|
|
idx++;
|
|
|
|
return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
|
|
}
|
|
|
|
/**
|
|
* phy_check_valid - check if there is a valid PHY setting which matches
|
|
* speed, duplex, and feature mask
|
|
* @speed: speed to match
|
|
* @duplex: duplex to match
|
|
* @features: A mask of the valid settings
|
|
*
|
|
* Description: Returns true if there is a valid setting, false otherwise.
|
|
*/
|
|
static inline bool phy_check_valid(int speed, int duplex, u32 features)
|
|
{
|
|
unsigned int idx;
|
|
|
|
idx = phy_find_valid(phy_find_setting(speed, duplex), features);
|
|
|
|
return settings[idx].speed == speed && settings[idx].duplex == duplex &&
|
|
(settings[idx].setting & features);
|
|
}
|
|
|
|
/**
|
|
* phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
|
|
* @phydev: the target phy_device struct
|
|
*
|
|
* Description: Make sure the PHY is set to supported speeds and
|
|
* duplexes. Drop down by one in this order: 1000/FULL,
|
|
* 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
|
|
*/
|
|
static void phy_sanitize_settings(struct phy_device *phydev)
|
|
{
|
|
u32 features = phydev->supported;
|
|
unsigned int idx;
|
|
|
|
/* Sanitize settings based on PHY capabilities */
|
|
if ((features & SUPPORTED_Autoneg) == 0)
|
|
phydev->autoneg = AUTONEG_DISABLE;
|
|
|
|
idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
|
|
features);
|
|
|
|
phydev->speed = settings[idx].speed;
|
|
phydev->duplex = settings[idx].duplex;
|
|
}
|
|
|
|
/**
|
|
* phy_ethtool_sset - generic ethtool sset function, handles all the details
|
|
* @phydev: target phy_device struct
|
|
* @cmd: ethtool_cmd
|
|
*
|
|
* A few notes about parameter checking:
|
|
* - We don't set port or transceiver, so we don't care what they
|
|
* were set to.
|
|
* - phy_start_aneg() will make sure forced settings are sane, and
|
|
* choose the next best ones from the ones selected, so we don't
|
|
* care if ethtool tries to give us bad values.
|
|
*/
|
|
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
|
|
{
|
|
u32 speed = ethtool_cmd_speed(cmd);
|
|
|
|
if (cmd->phy_address != phydev->addr)
|
|
return -EINVAL;
|
|
|
|
/* We make sure that we don't pass unsupported values in to the PHY */
|
|
cmd->advertising &= phydev->supported;
|
|
|
|
/* Verify the settings we care about. */
|
|
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_DISABLE &&
|
|
((speed != SPEED_1000 &&
|
|
speed != SPEED_100 &&
|
|
speed != SPEED_10) ||
|
|
(cmd->duplex != DUPLEX_HALF &&
|
|
cmd->duplex != DUPLEX_FULL)))
|
|
return -EINVAL;
|
|
|
|
phydev->autoneg = cmd->autoneg;
|
|
|
|
phydev->speed = speed;
|
|
|
|
phydev->advertising = cmd->advertising;
|
|
|
|
if (AUTONEG_ENABLE == cmd->autoneg)
|
|
phydev->advertising |= ADVERTISED_Autoneg;
|
|
else
|
|
phydev->advertising &= ~ADVERTISED_Autoneg;
|
|
|
|
phydev->duplex = cmd->duplex;
|
|
|
|
/* Restart the PHY */
|
|
phy_start_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(phy_ethtool_sset);
|
|
|
|
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
|
|
{
|
|
cmd->supported = phydev->supported;
|
|
|
|
cmd->advertising = phydev->advertising;
|
|
cmd->lp_advertising = phydev->lp_advertising;
|
|
|
|
ethtool_cmd_speed_set(cmd, phydev->speed);
|
|
cmd->duplex = phydev->duplex;
|
|
if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
|
|
cmd->port = PORT_BNC;
|
|
else
|
|
cmd->port = PORT_MII;
|
|
cmd->phy_address = phydev->addr;
|
|
cmd->transceiver = phy_is_internal(phydev) ?
|
|
XCVR_INTERNAL : XCVR_EXTERNAL;
|
|
cmd->autoneg = phydev->autoneg;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(phy_ethtool_gset);
|
|
|
|
/**
|
|
* phy_mii_ioctl - generic PHY MII ioctl interface
|
|
* @phydev: the phy_device struct
|
|
* @ifr: &struct ifreq for socket ioctl's
|
|
* @cmd: ioctl cmd to execute
|
|
*
|
|
* Note that this function is currently incompatible with the
|
|
* PHYCONTROL layer. It changes registers without regard to
|
|
* current state. Use at own risk.
|
|
*/
|
|
int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct mii_ioctl_data *mii_data = if_mii(ifr);
|
|
u16 val = mii_data->val_in;
|
|
bool change_autoneg = false;
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
mii_data->phy_id = phydev->addr;
|
|
/* fall through */
|
|
|
|
case SIOCGMIIREG:
|
|
mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
|
|
mii_data->reg_num);
|
|
return 0;
|
|
|
|
case SIOCSMIIREG:
|
|
if (mii_data->phy_id == phydev->addr) {
|
|
switch (mii_data->reg_num) {
|
|
case MII_BMCR:
|
|
if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
|
|
if (phydev->autoneg == AUTONEG_ENABLE)
|
|
change_autoneg = true;
|
|
phydev->autoneg = AUTONEG_DISABLE;
|
|
if (val & BMCR_FULLDPLX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
if (val & BMCR_SPEED1000)
|
|
phydev->speed = SPEED_1000;
|
|
else if (val & BMCR_SPEED100)
|
|
phydev->speed = SPEED_100;
|
|
else phydev->speed = SPEED_10;
|
|
}
|
|
else {
|
|
if (phydev->autoneg == AUTONEG_DISABLE)
|
|
change_autoneg = true;
|
|
phydev->autoneg = AUTONEG_ENABLE;
|
|
}
|
|
break;
|
|
case MII_ADVERTISE:
|
|
phydev->advertising = mii_adv_to_ethtool_adv_t(val);
|
|
change_autoneg = true;
|
|
break;
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
}
|
|
|
|
mdiobus_write(phydev->bus, mii_data->phy_id,
|
|
mii_data->reg_num, val);
|
|
|
|
if (mii_data->reg_num == MII_BMCR &&
|
|
val & BMCR_RESET)
|
|
return phy_init_hw(phydev);
|
|
|
|
if (change_autoneg)
|
|
return phy_start_aneg(phydev);
|
|
|
|
return 0;
|
|
|
|
case SIOCSHWTSTAMP:
|
|
if (phydev->drv->hwtstamp)
|
|
return phydev->drv->hwtstamp(phydev, ifr);
|
|
/* fall through */
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(phy_mii_ioctl);
|
|
|
|
/**
|
|
* phy_start_aneg - start auto-negotiation for this PHY device
|
|
* @phydev: the phy_device struct
|
|
*
|
|
* Description: Sanitizes the settings (if we're not autonegotiating
|
|
* them), and then calls the driver's config_aneg function.
|
|
* If the PHYCONTROL Layer is operating, we change the state to
|
|
* reflect the beginning of Auto-negotiation or forcing.
|
|
*/
|
|
int phy_start_aneg(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
|
|
if (AUTONEG_DISABLE == phydev->autoneg)
|
|
phy_sanitize_settings(phydev);
|
|
|
|
/* Invalidate LP advertising flags */
|
|
phydev->lp_advertising = 0;
|
|
|
|
err = phydev->drv->config_aneg(phydev);
|
|
if (err < 0)
|
|
goto out_unlock;
|
|
|
|
if (phydev->state != PHY_HALTED) {
|
|
if (AUTONEG_ENABLE == phydev->autoneg) {
|
|
phydev->state = PHY_AN;
|
|
phydev->link_timeout = PHY_AN_TIMEOUT;
|
|
} else {
|
|
phydev->state = PHY_FORCING;
|
|
phydev->link_timeout = PHY_FORCE_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(phy_start_aneg);
|
|
|
|
/**
|
|
* phy_start_machine - start PHY state machine tracking
|
|
* @phydev: the phy_device struct
|
|
*
|
|
* Description: The PHY infrastructure can run a state machine
|
|
* which tracks whether the PHY is starting up, negotiating,
|
|
* etc. This function starts the timer which tracks the state
|
|
* of the PHY. If you want to maintain your own state machine,
|
|
* do not call this function.
|
|
*/
|
|
void phy_start_machine(struct phy_device *phydev)
|
|
{
|
|
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
|
|
}
|
|
|
|
/**
|
|
* phy_stop_machine - stop the PHY state machine tracking
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Stops the state machine timer, sets the state to UP
|
|
* (unless it wasn't up yet). This function must be called BEFORE
|
|
* phy_detach.
|
|
*/
|
|
void phy_stop_machine(struct phy_device *phydev)
|
|
{
|
|
cancel_delayed_work_sync(&phydev->state_queue);
|
|
|
|
mutex_lock(&phydev->lock);
|
|
if (phydev->state > PHY_UP)
|
|
phydev->state = PHY_UP;
|
|
mutex_unlock(&phydev->lock);
|
|
}
|
|
|
|
/**
|
|
* phy_error - enter HALTED state for this PHY device
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Moves the PHY to the HALTED state in response to a read
|
|
* or write error, and tells the controller the link is down.
|
|
* Must not be called from interrupt context, or while the
|
|
* phydev->lock is held.
|
|
*/
|
|
static void phy_error(struct phy_device *phydev)
|
|
{
|
|
mutex_lock(&phydev->lock);
|
|
phydev->state = PHY_HALTED;
|
|
mutex_unlock(&phydev->lock);
|
|
}
|
|
|
|
/**
|
|
* phy_interrupt - PHY interrupt handler
|
|
* @irq: interrupt line
|
|
* @phy_dat: phy_device pointer
|
|
*
|
|
* Description: When a PHY interrupt occurs, the handler disables
|
|
* interrupts, and schedules a work task to clear the interrupt.
|
|
*/
|
|
static irqreturn_t phy_interrupt(int irq, void *phy_dat)
|
|
{
|
|
struct phy_device *phydev = phy_dat;
|
|
|
|
if (PHY_HALTED == phydev->state)
|
|
return IRQ_NONE; /* It can't be ours. */
|
|
|
|
/* The MDIO bus is not allowed to be written in interrupt
|
|
* context, so we need to disable the irq here. A work
|
|
* queue will write the PHY to disable and clear the
|
|
* interrupt, and then reenable the irq line.
|
|
*/
|
|
disable_irq_nosync(irq);
|
|
atomic_inc(&phydev->irq_disable);
|
|
|
|
queue_work(system_power_efficient_wq, &phydev->phy_queue);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* phy_enable_interrupts - Enable the interrupts from the PHY side
|
|
* @phydev: target phy_device struct
|
|
*/
|
|
static int phy_enable_interrupts(struct phy_device *phydev)
|
|
{
|
|
int err = phy_clear_interrupt(phydev);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
|
|
}
|
|
|
|
/**
|
|
* phy_disable_interrupts - Disable the PHY interrupts from the PHY side
|
|
* @phydev: target phy_device struct
|
|
*/
|
|
static int phy_disable_interrupts(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
/* Disable PHY interrupts */
|
|
err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
|
|
if (err)
|
|
goto phy_err;
|
|
|
|
/* Clear the interrupt */
|
|
err = phy_clear_interrupt(phydev);
|
|
if (err)
|
|
goto phy_err;
|
|
|
|
return 0;
|
|
|
|
phy_err:
|
|
phy_error(phydev);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* phy_start_interrupts - request and enable interrupts for a PHY device
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Request the interrupt for the given PHY.
|
|
* If this fails, then we set irq to PHY_POLL.
|
|
* Otherwise, we enable the interrupts in the PHY.
|
|
* This should only be called with a valid IRQ number.
|
|
* Returns 0 on success or < 0 on error.
|
|
*/
|
|
int phy_start_interrupts(struct phy_device *phydev)
|
|
{
|
|
atomic_set(&phydev->irq_disable, 0);
|
|
if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt",
|
|
phydev) < 0) {
|
|
pr_warn("%s: Can't get IRQ %d (PHY)\n",
|
|
phydev->bus->name, phydev->irq);
|
|
phydev->irq = PHY_POLL;
|
|
return 0;
|
|
}
|
|
|
|
return phy_enable_interrupts(phydev);
|
|
}
|
|
EXPORT_SYMBOL(phy_start_interrupts);
|
|
|
|
/**
|
|
* phy_stop_interrupts - disable interrupts from a PHY device
|
|
* @phydev: target phy_device struct
|
|
*/
|
|
int phy_stop_interrupts(struct phy_device *phydev)
|
|
{
|
|
int err = phy_disable_interrupts(phydev);
|
|
|
|
if (err)
|
|
phy_error(phydev);
|
|
|
|
free_irq(phydev->irq, phydev);
|
|
|
|
/* Cannot call flush_scheduled_work() here as desired because
|
|
* of rtnl_lock(), but we do not really care about what would
|
|
* be done, except from enable_irq(), so cancel any work
|
|
* possibly pending and take care of the matter below.
|
|
*/
|
|
cancel_work_sync(&phydev->phy_queue);
|
|
/* If work indeed has been cancelled, disable_irq() will have
|
|
* been left unbalanced from phy_interrupt() and enable_irq()
|
|
* has to be called so that other devices on the line work.
|
|
*/
|
|
while (atomic_dec_return(&phydev->irq_disable) >= 0)
|
|
enable_irq(phydev->irq);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(phy_stop_interrupts);
|
|
|
|
/**
|
|
* phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
|
|
* @work: work_struct that describes the work to be done
|
|
*/
|
|
void phy_change(struct work_struct *work)
|
|
{
|
|
struct phy_device *phydev =
|
|
container_of(work, struct phy_device, phy_queue);
|
|
|
|
if (phydev->drv->did_interrupt &&
|
|
!phydev->drv->did_interrupt(phydev))
|
|
goto ignore;
|
|
|
|
if (phy_disable_interrupts(phydev))
|
|
goto phy_err;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
|
|
phydev->state = PHY_CHANGELINK;
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
atomic_dec(&phydev->irq_disable);
|
|
enable_irq(phydev->irq);
|
|
|
|
/* Reenable interrupts */
|
|
if (PHY_HALTED != phydev->state &&
|
|
phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
|
|
goto irq_enable_err;
|
|
|
|
/* reschedule state queue work to run as soon as possible */
|
|
cancel_delayed_work_sync(&phydev->state_queue);
|
|
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
|
|
return;
|
|
|
|
ignore:
|
|
atomic_dec(&phydev->irq_disable);
|
|
enable_irq(phydev->irq);
|
|
return;
|
|
|
|
irq_enable_err:
|
|
disable_irq(phydev->irq);
|
|
atomic_inc(&phydev->irq_disable);
|
|
phy_err:
|
|
phy_error(phydev);
|
|
}
|
|
|
|
/**
|
|
* phy_stop - Bring down the PHY link, and stop checking the status
|
|
* @phydev: target phy_device struct
|
|
*/
|
|
void phy_stop(struct phy_device *phydev)
|
|
{
|
|
mutex_lock(&phydev->lock);
|
|
|
|
if (PHY_HALTED == phydev->state)
|
|
goto out_unlock;
|
|
|
|
if (phy_interrupt_is_valid(phydev)) {
|
|
/* Disable PHY Interrupts */
|
|
phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
|
|
|
|
/* Clear any pending interrupts */
|
|
phy_clear_interrupt(phydev);
|
|
}
|
|
|
|
phydev->state = PHY_HALTED;
|
|
|
|
out_unlock:
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
/* Cannot call flush_scheduled_work() here as desired because
|
|
* of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
|
|
* will not reenable interrupts.
|
|
*/
|
|
}
|
|
EXPORT_SYMBOL(phy_stop);
|
|
|
|
/**
|
|
* phy_start - start or restart a PHY device
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: Indicates the attached device's readiness to
|
|
* handle PHY-related work. Used during startup to start the
|
|
* PHY, and after a call to phy_stop() to resume operation.
|
|
* Also used to indicate the MDIO bus has cleared an error
|
|
* condition.
|
|
*/
|
|
void phy_start(struct phy_device *phydev)
|
|
{
|
|
mutex_lock(&phydev->lock);
|
|
|
|
switch (phydev->state) {
|
|
case PHY_STARTING:
|
|
phydev->state = PHY_PENDING;
|
|
break;
|
|
case PHY_READY:
|
|
phydev->state = PHY_UP;
|
|
break;
|
|
case PHY_HALTED:
|
|
phydev->state = PHY_RESUMING;
|
|
default:
|
|
break;
|
|
}
|
|
mutex_unlock(&phydev->lock);
|
|
}
|
|
EXPORT_SYMBOL(phy_start);
|
|
|
|
/**
|
|
* phy_state_machine - Handle the state machine
|
|
* @work: work_struct that describes the work to be done
|
|
*/
|
|
void phy_state_machine(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct phy_device *phydev =
|
|
container_of(dwork, struct phy_device, state_queue);
|
|
bool needs_aneg = false, do_suspend = false, do_resume = false;
|
|
int err = 0;
|
|
|
|
mutex_lock(&phydev->lock);
|
|
|
|
if (phydev->drv->link_change_notify)
|
|
phydev->drv->link_change_notify(phydev);
|
|
|
|
switch (phydev->state) {
|
|
case PHY_DOWN:
|
|
case PHY_STARTING:
|
|
case PHY_READY:
|
|
case PHY_PENDING:
|
|
break;
|
|
case PHY_UP:
|
|
needs_aneg = true;
|
|
|
|
phydev->link_timeout = PHY_AN_TIMEOUT;
|
|
|
|
break;
|
|
case PHY_AN:
|
|
err = phy_read_status(phydev);
|
|
if (err < 0)
|
|
break;
|
|
|
|
/* If the link is down, give up on negotiation for now */
|
|
if (!phydev->link) {
|
|
phydev->state = PHY_NOLINK;
|
|
netif_carrier_off(phydev->attached_dev);
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
break;
|
|
}
|
|
|
|
/* Check if negotiation is done. Break if there's an error */
|
|
err = phy_aneg_done(phydev);
|
|
if (err < 0)
|
|
break;
|
|
|
|
/* If AN is done, we're running */
|
|
if (err > 0) {
|
|
phydev->state = PHY_RUNNING;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
|
|
} else if (0 == phydev->link_timeout--)
|
|
needs_aneg = true;
|
|
break;
|
|
case PHY_NOLINK:
|
|
err = phy_read_status(phydev);
|
|
if (err)
|
|
break;
|
|
|
|
if (phydev->link) {
|
|
if (AUTONEG_ENABLE == phydev->autoneg) {
|
|
err = phy_aneg_done(phydev);
|
|
if (err < 0)
|
|
break;
|
|
|
|
if (!err) {
|
|
phydev->state = PHY_AN;
|
|
phydev->link_timeout = PHY_AN_TIMEOUT;
|
|
break;
|
|
}
|
|
}
|
|
phydev->state = PHY_RUNNING;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
}
|
|
break;
|
|
case PHY_FORCING:
|
|
err = genphy_update_link(phydev);
|
|
if (err)
|
|
break;
|
|
|
|
if (phydev->link) {
|
|
phydev->state = PHY_RUNNING;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
} else {
|
|
if (0 == phydev->link_timeout--)
|
|
needs_aneg = true;
|
|
}
|
|
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
break;
|
|
case PHY_RUNNING:
|
|
/* Only register a CHANGE if we are
|
|
* polling or ignoring interrupts
|
|
*/
|
|
if (!phy_interrupt_is_valid(phydev))
|
|
phydev->state = PHY_CHANGELINK;
|
|
break;
|
|
case PHY_CHANGELINK:
|
|
err = phy_read_status(phydev);
|
|
if (err)
|
|
break;
|
|
|
|
if (phydev->link) {
|
|
phydev->state = PHY_RUNNING;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
} else {
|
|
phydev->state = PHY_NOLINK;
|
|
netif_carrier_off(phydev->attached_dev);
|
|
}
|
|
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
|
|
if (phy_interrupt_is_valid(phydev))
|
|
err = phy_config_interrupt(phydev,
|
|
PHY_INTERRUPT_ENABLED);
|
|
break;
|
|
case PHY_HALTED:
|
|
if (phydev->link) {
|
|
phydev->link = 0;
|
|
netif_carrier_off(phydev->attached_dev);
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
do_suspend = true;
|
|
}
|
|
break;
|
|
case PHY_RESUMING:
|
|
err = phy_clear_interrupt(phydev);
|
|
if (err)
|
|
break;
|
|
|
|
err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
|
|
if (err)
|
|
break;
|
|
|
|
if (AUTONEG_ENABLE == phydev->autoneg) {
|
|
err = phy_aneg_done(phydev);
|
|
if (err < 0)
|
|
break;
|
|
|
|
/* err > 0 if AN is done.
|
|
* Otherwise, it's 0, and we're still waiting for AN
|
|
*/
|
|
if (err > 0) {
|
|
err = phy_read_status(phydev);
|
|
if (err)
|
|
break;
|
|
|
|
if (phydev->link) {
|
|
phydev->state = PHY_RUNNING;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
} else {
|
|
phydev->state = PHY_NOLINK;
|
|
}
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
} else {
|
|
phydev->state = PHY_AN;
|
|
phydev->link_timeout = PHY_AN_TIMEOUT;
|
|
}
|
|
} else {
|
|
err = phy_read_status(phydev);
|
|
if (err)
|
|
break;
|
|
|
|
if (phydev->link) {
|
|
phydev->state = PHY_RUNNING;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
} else {
|
|
phydev->state = PHY_NOLINK;
|
|
}
|
|
phydev->adjust_link(phydev->attached_dev);
|
|
}
|
|
do_resume = true;
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
if (needs_aneg)
|
|
err = phy_start_aneg(phydev);
|
|
else if (do_suspend)
|
|
phy_suspend(phydev);
|
|
else if (do_resume)
|
|
phy_resume(phydev);
|
|
|
|
if (err < 0)
|
|
phy_error(phydev);
|
|
|
|
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
|
|
PHY_STATE_TIME * HZ);
|
|
}
|
|
|
|
void phy_mac_interrupt(struct phy_device *phydev, int new_link)
|
|
{
|
|
cancel_work_sync(&phydev->phy_queue);
|
|
phydev->link = new_link;
|
|
schedule_work(&phydev->phy_queue);
|
|
}
|
|
EXPORT_SYMBOL(phy_mac_interrupt);
|
|
|
|
static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
|
|
int addr)
|
|
{
|
|
/* Write the desired MMD Devad */
|
|
bus->write(bus, addr, MII_MMD_CTRL, devad);
|
|
|
|
/* Write the desired MMD register address */
|
|
bus->write(bus, addr, MII_MMD_DATA, prtad);
|
|
|
|
/* Select the Function : DATA with no post increment */
|
|
bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
|
|
}
|
|
|
|
/**
|
|
* phy_read_mmd_indirect - reads data from the MMD registers
|
|
* @phydev: The PHY device bus
|
|
* @prtad: MMD Address
|
|
* @devad: MMD DEVAD
|
|
* @addr: PHY address on the MII bus
|
|
*
|
|
* Description: it reads data from the MMD registers (clause 22 to access to
|
|
* clause 45) of the specified phy address.
|
|
* To read these register we have:
|
|
* 1) Write reg 13 // DEVAD
|
|
* 2) Write reg 14 // MMD Address
|
|
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
|
|
* 3) Read reg 14 // Read MMD data
|
|
*/
|
|
int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
|
|
int devad, int addr)
|
|
{
|
|
struct phy_driver *phydrv = phydev->drv;
|
|
int value = -1;
|
|
|
|
if (phydrv->read_mmd_indirect == NULL) {
|
|
mmd_phy_indirect(phydev->bus, prtad, devad, addr);
|
|
|
|
/* Read the content of the MMD's selected register */
|
|
value = phydev->bus->read(phydev->bus, addr, MII_MMD_DATA);
|
|
} else {
|
|
value = phydrv->read_mmd_indirect(phydev, prtad, devad, addr);
|
|
}
|
|
return value;
|
|
}
|
|
EXPORT_SYMBOL(phy_read_mmd_indirect);
|
|
|
|
/**
|
|
* phy_write_mmd_indirect - writes data to the MMD registers
|
|
* @phydev: The PHY device
|
|
* @prtad: MMD Address
|
|
* @devad: MMD DEVAD
|
|
* @addr: PHY address on the MII bus
|
|
* @data: data to write in the MMD register
|
|
*
|
|
* Description: Write data from the MMD registers of the specified
|
|
* phy address.
|
|
* To write these register we have:
|
|
* 1) Write reg 13 // DEVAD
|
|
* 2) Write reg 14 // MMD Address
|
|
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
|
|
* 3) Write reg 14 // Write MMD data
|
|
*/
|
|
void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
|
|
int devad, int addr, u32 data)
|
|
{
|
|
struct phy_driver *phydrv = phydev->drv;
|
|
|
|
if (phydrv->write_mmd_indirect == NULL) {
|
|
mmd_phy_indirect(phydev->bus, prtad, devad, addr);
|
|
|
|
/* Write the data into MMD's selected register */
|
|
phydev->bus->write(phydev->bus, addr, MII_MMD_DATA, data);
|
|
} else {
|
|
phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(phy_write_mmd_indirect);
|
|
|
|
/**
|
|
* phy_init_eee - init and check the EEE feature
|
|
* @phydev: target phy_device struct
|
|
* @clk_stop_enable: PHY may stop the clock during LPI
|
|
*
|
|
* Description: it checks if the Energy-Efficient Ethernet (EEE)
|
|
* is supported by looking at the MMD registers 3.20 and 7.60/61
|
|
* and it programs the MMD register 3.0 setting the "Clock stop enable"
|
|
* bit if required.
|
|
*/
|
|
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
|
|
{
|
|
/* According to 802.3az,the EEE is supported only in full duplex-mode.
|
|
* Also EEE feature is active when core is operating with MII, GMII
|
|
* or RGMII. Internal PHYs are also allowed to proceed and should
|
|
* return an error if they do not support EEE.
|
|
*/
|
|
if ((phydev->duplex == DUPLEX_FULL) &&
|
|
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
|
|
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||
|
|
(phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
|
|
phy_is_internal(phydev))) {
|
|
int eee_lp, eee_cap, eee_adv;
|
|
u32 lp, cap, adv;
|
|
int status;
|
|
|
|
/* Read phy status to properly get the right settings */
|
|
status = phy_read_status(phydev);
|
|
if (status)
|
|
return status;
|
|
|
|
/* First check if the EEE ability is supported */
|
|
eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
|
|
MDIO_MMD_PCS, phydev->addr);
|
|
if (eee_cap <= 0)
|
|
goto eee_exit_err;
|
|
|
|
cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
|
|
if (!cap)
|
|
goto eee_exit_err;
|
|
|
|
/* Check which link settings negotiated and verify it in
|
|
* the EEE advertising registers.
|
|
*/
|
|
eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
|
|
MDIO_MMD_AN, phydev->addr);
|
|
if (eee_lp <= 0)
|
|
goto eee_exit_err;
|
|
|
|
eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
|
|
MDIO_MMD_AN, phydev->addr);
|
|
if (eee_adv <= 0)
|
|
goto eee_exit_err;
|
|
|
|
adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
|
|
lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
|
|
if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv))
|
|
goto eee_exit_err;
|
|
|
|
if (clk_stop_enable) {
|
|
/* Configure the PHY to stop receiving xMII
|
|
* clock while it is signaling LPI.
|
|
*/
|
|
int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
|
|
MDIO_MMD_PCS,
|
|
phydev->addr);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
|
|
phy_write_mmd_indirect(phydev, MDIO_CTRL1,
|
|
MDIO_MMD_PCS, phydev->addr,
|
|
val);
|
|
}
|
|
|
|
return 0; /* EEE supported */
|
|
}
|
|
eee_exit_err:
|
|
return -EPROTONOSUPPORT;
|
|
}
|
|
EXPORT_SYMBOL(phy_init_eee);
|
|
|
|
/**
|
|
* phy_get_eee_err - report the EEE wake error count
|
|
* @phydev: target phy_device struct
|
|
*
|
|
* Description: it is to report the number of time where the PHY
|
|
* failed to complete its normal wake sequence.
|
|
*/
|
|
int phy_get_eee_err(struct phy_device *phydev)
|
|
{
|
|
return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
|
|
MDIO_MMD_PCS, phydev->addr);
|
|
}
|
|
EXPORT_SYMBOL(phy_get_eee_err);
|
|
|
|
/**
|
|
* phy_ethtool_get_eee - get EEE supported and status
|
|
* @phydev: target phy_device struct
|
|
* @data: ethtool_eee data
|
|
*
|
|
* Description: it reportes the Supported/Advertisement/LP Advertisement
|
|
* capabilities.
|
|
*/
|
|
int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
|
|
{
|
|
int val;
|
|
|
|
/* Get Supported EEE */
|
|
val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
|
|
MDIO_MMD_PCS, phydev->addr);
|
|
if (val < 0)
|
|
return val;
|
|
data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
|
|
|
|
/* Get advertisement EEE */
|
|
val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
|
|
MDIO_MMD_AN, phydev->addr);
|
|
if (val < 0)
|
|
return val;
|
|
data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
|
|
|
|
/* Get LP advertisement EEE */
|
|
val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
|
|
MDIO_MMD_AN, phydev->addr);
|
|
if (val < 0)
|
|
return val;
|
|
data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(phy_ethtool_get_eee);
|
|
|
|
/**
|
|
* phy_ethtool_set_eee - set EEE supported and status
|
|
* @phydev: target phy_device struct
|
|
* @data: ethtool_eee data
|
|
*
|
|
* Description: it is to program the Advertisement EEE register.
|
|
*/
|
|
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
|
|
{
|
|
int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
|
|
|
|
phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
|
|
phydev->addr, val);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(phy_ethtool_set_eee);
|
|
|
|
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
|
|
{
|
|
if (phydev->drv->set_wol)
|
|
return phydev->drv->set_wol(phydev, wol);
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
EXPORT_SYMBOL(phy_ethtool_set_wol);
|
|
|
|
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
|
|
{
|
|
if (phydev->drv->get_wol)
|
|
phydev->drv->get_wol(phydev, wol);
|
|
}
|
|
EXPORT_SYMBOL(phy_ethtool_get_wol);
|