linux/drivers/serial
Mark A. Greer 7bbdc3d51c serial: MPSC: set baudrate when BRG divider is set.
The clock to generate the desired baudrate with the MPSC is first divided
by the Baud Rate Generator (BRG) and then by the MPSC itself.  So, when the
BRG divider is changed, the MPSC divider must also be changed to generate
the correct baudrate.  During MPSC initialization, the BRG divider is
changed but the MPSC divider isn't changed until much later.  This results
in some printk's coming out garbled.  To fix that, set the MPSC divider at
the same time that the BRG divider is changed.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:10 -08:00
..
cpm_uart [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c 2008-01-28 08:31:05 -06:00
jsm jsm: Remove further unneeded crud 2007-10-17 08:42:52 -07:00
8250_accent.c
8250_acorn.c [ARM] ecard: add ecardm_iomap() / ecardm_iounmap() 2007-05-11 17:19:02 +01:00
8250_au1x00.c
8250_boca.c
8250_early.c serial: fix compile warning about putc 2007-11-05 15:12:32 -08:00
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c serial: add early_serial_setup() back to header file 2007-07-18 08:38:22 -07:00
8250_hub6.c
8250_mca.c
8250_pci.c serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h 2008-02-05 09:44:09 -08:00
8250_pnp.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.h
21285.c [ARM] 21285 serial: fix build error 2008-02-04 13:14:06 +00:00
68328serial.c m68knommu: use IRQF_DISABLE in m68328serial.c 2008-02-01 21:00:01 +11:00
68328serial.h
68360serial.c 68360serial: remove broken optimisation 2007-07-16 09:05:51 -07:00
amba-pl010.c [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking 2007-06-05 19:39:49 +01:00
amba-pl011.c amba-pl011, rename BIT macro 2007-10-19 11:53:42 -07:00
atmel_serial.c [ARM] 4660/3: at91: allow selecting UART for early kernel messages 2008-02-04 13:16:39 +00:00
bfin_5xx.c [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option 2008-01-22 15:29:18 +08:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
crisv10.h CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
dz.c [PATCH] dz: remove struct pt_regs references 2007-03-05 07:57:51 -08:00
dz.h [PATCH] dz: Fixes to make it work 2006-12-07 08:39:41 -08:00
icom.c kobject: convert icom to use kref, not kobject 2008-01-24 20:40:09 -08:00
icom.h Coding style fix drivers/serial/icom.h 2008-02-03 14:47:38 +02:00
imx.c [ARM] 4481/1: Fix a bug when i.MX is compiled as a module 2007-07-20 09:55:14 +01:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c IP22ZILOG: fix lockup and sysrq 2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig SERIAL_NETX_CONSOLE provides console for NetX, not IMX 2008-02-03 14:55:57 +02:00
m32r_sio_reg.h
m32r_sio.c m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
m32r_sio.h m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
Makefile m68knommu: build support for new ColdFire serial driver 2008-02-01 20:54:03 +11:00
mcf.c m68knommu: use container_of in mcf.c 2008-02-01 21:00:01 +11:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h
mpc52xx_uart.c [POWERPC] mpc5200: normalize compatible property bindings 2008-01-26 15:26:01 -07:00
mpsc.c serial: MPSC: set baudrate when BRG divider is set. 2008-02-05 09:44:10 -08:00
mux.c drivers/serial/: Spelling fixes 2008-02-03 17:29:25 +02:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c [POWERPC] of_serial: add port type checking 2007-07-10 21:53:42 +10:00
pmac_zilog.c [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled 2007-11-26 14:39:12 +00:00
s3c2410.c drivers/serial/s3c2410.c: remove dead config symbols 2008-02-05 09:44:09 -08:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sb1250-duart.c BCM1480 serial build fix 2007-09-11 17:21:19 -07:00
serial_core.c serial: speed setup failure reporting 2008-02-05 09:44:10 -08:00
serial_cs.c pcmcia: replace kio_addr_t with unsigned int everywhere 2008-02-05 09:44:08 -08:00
serial_ks8695.c [ARM] 4411/1: KS8695: Another serial driver fix 2007-05-30 13:15:19 +01:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c serial: fix serial_txx9 console initialization 2007-10-30 08:06:55 -07:00
sh-sci.c sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sh-sci.h sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sn_console.c sn_console section mismatch warning 2007-07-16 09:05:53 -07:00
suncore.c [SERIAL]: Fix section mismatches in Sun serial console drivers. 2007-12-29 01:19:49 -08:00
suncore.h [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunhv.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.h [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
uartlite.c [POWERPC] Xilinx uartlite: Section type fixups 2008-01-09 07:59:00 -07:00
ucc_uart.c [POWERPC] qe-uart: add support for Freescale QUICCEngine UART 2008-01-23 19:34:12 -06:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c serial: fix vr41xx_siu serial console support 2007-07-31 15:39:41 -07:00
zs.c zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
zs.h zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00