mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 03:55:09 +08:00
b840b6e65c
Add OMAP36xx support to ti-soc-thermal driver. This chip is also unreliable. The data provided here is based on OMAP36xx TRM: http://www.ti.com/lit/ug/swpu177aa/swpu177aa.pdf Signed-off-by: Eduardo Valentin <edubezva@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
89 lines
2.2 KiB
Plaintext
89 lines
2.2 KiB
Plaintext
* Texas Instrument OMAP SCM bandgap bindings
|
|
|
|
In the System Control Module, OMAP supplies a voltage reference
|
|
and a temperature sensor feature that are gathered in the band
|
|
gap voltage and temperature sensor (VBGAPTS) module. The band
|
|
gap provides current and voltage reference for its internal
|
|
circuits and other analog IP blocks. The analog-to-digital
|
|
converter (ADC) produces an output value that is proportional
|
|
to the silicon temperature.
|
|
|
|
Required properties:
|
|
- compatible : Should be:
|
|
- "ti,omap34xx-bandgap" : for OMAP34xx bandgap
|
|
- "ti,omap36xx-bandgap" : for OMAP36xx bandgap
|
|
- "ti,omap4430-bandgap" : for OMAP4430 bandgap
|
|
- "ti,omap4460-bandgap" : for OMAP4460 bandgap
|
|
- "ti,omap4470-bandgap" : for OMAP4470 bandgap
|
|
- "ti,omap5430-bandgap" : for OMAP5430 bandgap
|
|
- interrupts : this entry should indicate which interrupt line
|
|
the talert signal is routed to;
|
|
Specific:
|
|
- gpios : this entry should be used to inform which GPIO
|
|
line the tshut signal is routed to. The informed GPIO will
|
|
be treated as an IRQ;
|
|
- regs : this entry must also be specified and it is specific
|
|
to each bandgap version, because the mapping may change from
|
|
soc to soc, apart of depending on available features.
|
|
|
|
Example:
|
|
OMAP34xx:
|
|
bandgap {
|
|
reg = <0x48002524 0x4>;
|
|
compatible = "ti,omap34xx-bandgap";
|
|
};
|
|
|
|
OMAP36xx:
|
|
bandgap {
|
|
reg = <0x48002524 0x4>;
|
|
compatible = "ti,omap36xx-bandgap";
|
|
};
|
|
|
|
OMAP4430:
|
|
bandgap {
|
|
reg = <0x4a002260 0x4 0x4a00232C 0x4>;
|
|
compatible = "ti,omap4430-bandgap";
|
|
};
|
|
|
|
OMAP4460:
|
|
bandgap {
|
|
reg = <0x4a002260 0x4
|
|
0x4a00232C 0x4
|
|
0x4a002378 0x18>;
|
|
compatible = "ti,omap4460-bandgap";
|
|
interrupts = <0 126 4>; /* talert */
|
|
gpios = <&gpio3 22 0>; /* tshut */
|
|
};
|
|
|
|
OMAP4470:
|
|
bandgap {
|
|
reg = <0x4a002260 0x4
|
|
0x4a00232C 0x4
|
|
0x4a002378 0x18>;
|
|
compatible = "ti,omap4470-bandgap";
|
|
interrupts = <0 126 4>; /* talert */
|
|
gpios = <&gpio3 22 0>; /* tshut */
|
|
};
|
|
|
|
OMAP5430:
|
|
bandgap {
|
|
reg = <0x4a0021e0 0xc
|
|
0x4a00232c 0xc
|
|
0x4a002380 0x2c
|
|
0x4a0023C0 0x3c>;
|
|
compatible = "ti,omap5430-bandgap";
|
|
interrupts = <0 126 4>; /* talert */
|
|
};
|
|
|
|
DRA752:
|
|
bandgap {
|
|
reg = <0x4a0021e0 0xc
|
|
0x4a00232c 0xc
|
|
0x4a002380 0x2c
|
|
0x4a0023C0 0x3c
|
|
0x4a002564 0x8
|
|
0x4a002574 0x50>;
|
|
compatible = "ti,dra752-bandgap";
|
|
interrupts = <0 126 4>; /* talert */
|
|
};
|