Grygorii Strashko 79a5a18aa9 phy: core: rework phy_set_mode to accept phy mode and submode ... Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2018-12-12 10:01:33 +05:30
..
allwinner	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
amlogic	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
broadcom	phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence	2018-09-25 16:10:08 +05:30
cadence	phy: Add driver for Cadence MHDP DisplayPort SD0801 PHY	2018-09-10 14:25:44 +05:30
hisilicon	phy: add inno-usb2-phy driver for hi3798cv200 SoC	2018-03-16 16:55:29 +05:30
lantiq	phy: lantiq: Fix compile warning	2018-09-26 13:09:39 +05:30
marvell	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
mediatek	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
motorola	gpiolib: Pass array info to get/set array functions	2018-09-13 11:16:54 +02:00
mscc	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
qualcomm	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
ralink	phy: add 'depends on HAS_IOMEM' to fix unmet dependency	2018-03-16 13:40:45 +05:30
renesas	phy: renesas: convert to SPDX identifiers	2018-09-26 13:09:41 +05:30
rockchip	phy: rockchip-usb: add usb-uart setup for rk3188	2018-09-25 16:10:13 +05:30
samsung	phy: exynos-mipi-video: Simplify code by using regmap_update_bits()	2018-04-25 10:52:59 +05:30
socionext	phy: uniphier-pcie: Depend on HAS_IOMEM	2018-11-12 16:19:06 +05:30
st	phy: stm32: fix usbphyc static checker and checkpatch warnings	2018-05-20 21:51:25 +05:30
tegra	phy: Convert to using %pOFn instead of device_node.name	2018-09-25 16:10:07 +05:30
ti	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
Kconfig	USB/PHY patches for 4.20-rc1	2018-10-26 08:14:13 -07:00
Makefile	USB/PHY patches for 4.20-rc1	2018-10-26 08:14:13 -07:00
phy-core.c	phy: core: rework phy_set_mode to accept phy mode and submode	2018-12-12 10:01:33 +05:30
phy-lpc18xx-usb-otg.c	phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()	2018-03-16 13:40:42 +05:30
phy-pistachio-usb.c	PHY: Add driver for Pistachio USB2.0 PHY	2015-06-21 21:53:38 +02:00
phy-xgene.c	phy: xgene: rename "enum phy_mode" to "enum xgene_phy_mode"	2016-07-04 17:19:21 +05:30