mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 18:54:09 +08:00
796bcae736
A published errata for ppc440epx states, that when running Linux with both EHCI and OHCI modules loaded, the EHCI module experiences a fatal error when a high-speed device is connected to the USB2.0, and functions normally if OHCI module is not loaded. There used to be recommendation to use only hi-speed or full-speed devices with specific conditions, when respective module was unloaded. Later, it was observed that ohci suspend is enough to keep things going, and it was turned into workaround, as explained below. Quote from original descriprion: The 440EPx USB 2.0 Host controller is an EHCI compliant controller. In USB 2.0 Host controllers, each EHCI controller has one or more companion controllers, which may be OHCI or UHCI. An USB 2.0 Host controller will contain one or more ports. For each port, only one of the controllers is connected at any one time. In the 440EPx, there is only one OHCI companion controller, and only one USB 2.0 Host port. All ports on an USB 2.0 controller default to the companion controller. If you load only an ohci driver, it will have control of the ports and any deviceplugged in will operate, although high speed devices will be forced to operate at full speed. When an ehci driver is loaded, it explicitly takes control of the ports. If there is a device connected, and / or every time there is a new device connected, the ehci driver determines if the device is high speed or not. If it is high speed, the driver retains control of the port. If it is not, the driver explicitly gives the companion controller control of the port. The is a software workaround that uses Initial version of the software workaround was posted to linux-usb-devel: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html and later available from amcc.com: http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2 The patch below is generally based on the latter, but reworked to powerpc/of_device USB drivers, and uses a few devicetree inquiries to get rid of (some) hardcoded defines. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|---|---|---|
| .. | ||
| whci | ||
| ehci-au1xxx.c | ||
| ehci-dbg.c | ||
| ehci-fsl.c | ||
| ehci-fsl.h | ||
| ehci-hcd.c | ||
| ehci-hub.c | ||
| ehci-ixp4xx.c | ||
| ehci-mem.c | ||
| ehci-orion.c | ||
| ehci-pci.c | ||
| ehci-ppc-of.c | ||
| ehci-ps3.c | ||
| ehci-q.c | ||
| ehci-sched.c | ||
| ehci.h | ||
| hwa-hc.c | ||
| isp116x-hcd.c | ||
| isp116x.h | ||
| isp1760-hcd.c | ||
| isp1760-hcd.h | ||
| isp1760-if.c | ||
| Kconfig | ||
| Makefile | ||
| ohci-at91.c | ||
| ohci-au1xxx.c | ||
| ohci-dbg.c | ||
| ohci-ep93xx.c | ||
| ohci-hcd.c | ||
| ohci-hub.c | ||
| ohci-lh7a404.c | ||
| ohci-mem.c | ||
| ohci-omap.c | ||
| ohci-pci.c | ||
| ohci-pnx4008.c | ||
| ohci-pnx8550.c | ||
| ohci-ppc-of.c | ||
| ohci-ppc-soc.c | ||
| ohci-ps3.c | ||
| ohci-pxa27x.c | ||
| ohci-q.c | ||
| ohci-s3c2410.c | ||
| ohci-sa1111.c | ||
| ohci-sh.c | ||
| ohci-sm501.c | ||
| ohci-ssb.c | ||
| ohci-tmio.c | ||
| ohci.h | ||
| oxu210hp-hcd.c | ||
| oxu210hp.h | ||
| pci-quirks.c | ||
| pci-quirks.h | ||
| r8a66597-hcd.c | ||
| r8a66597.h | ||
| sl811_cs.c | ||
| sl811-hcd.c | ||
| sl811.h | ||
| u132-hcd.c | ||
| uhci-debug.c | ||
| uhci-hcd.c | ||
| uhci-hcd.h | ||
| uhci-hub.c | ||
| uhci-q.c | ||