mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-22 18:44:44 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
1185 lines
31 KiB
C
1185 lines
31 KiB
C
/*
|
|
* Carsten Langgaard, carstenl@mips.com
|
|
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
*
|
|
* ########################################################################
|
|
*
|
|
* This program is free software; you can distribute it and/or modify it
|
|
* under the terms of the GNU General Public License (Version 2) as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
*
|
|
* ########################################################################
|
|
*
|
|
* SAA9730 ethernet driver.
|
|
*
|
|
* Changes:
|
|
* Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API (pci_driver).
|
|
* Conversion to spinlocks.
|
|
* Error handling fixes.
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/module.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/addrspace.h>
|
|
#include <asm/mips-boards/prom.h>
|
|
|
|
#include "saa9730.h"
|
|
|
|
#ifdef LAN_SAA9730_DEBUG
|
|
int lan_saa9730_debug = LAN_SAA9730_DEBUG;
|
|
#else
|
|
int lan_saa9730_debug;
|
|
#endif
|
|
|
|
#define DRV_MODULE_NAME "saa9730"
|
|
|
|
static struct pci_device_id saa9730_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9370,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
|
|
|
|
/* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
|
|
static unsigned int pci_irq_line;
|
|
|
|
#define INL(a) inl((unsigned long)a)
|
|
#define OUTL(x,a) outl(x,(unsigned long)a)
|
|
|
|
static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
|
|
{
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
|
|
&lp->evm_saa9730_regs->InterruptBlock1);
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
|
|
&lp->evm_saa9730_regs->InterruptStatus1);
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
|
|
EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
|
|
}
|
|
static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
|
|
{
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
|
|
&lp->evm_saa9730_regs->InterruptBlock1);
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
|
|
&lp->evm_saa9730_regs->InterruptEnable1);
|
|
}
|
|
|
|
static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
|
|
{
|
|
OUTL(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
|
|
}
|
|
|
|
static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
|
|
{
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
|
|
&lp->evm_saa9730_regs->InterruptBlock1);
|
|
}
|
|
|
|
static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
|
|
{
|
|
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
|
|
&lp->evm_saa9730_regs->InterruptBlock1);
|
|
}
|
|
|
|
static void show_saa9730_regs(struct lan_saa9730_private *lp)
|
|
{
|
|
int i, j;
|
|
printk("TxmBufferA = %x\n", lp->TxmBuffer[0][0]);
|
|
printk("TxmBufferB = %x\n", lp->TxmBuffer[1][0]);
|
|
printk("RcvBufferA = %x\n", lp->RcvBuffer[0][0]);
|
|
printk("RcvBufferB = %x\n", lp->RcvBuffer[1][0]);
|
|
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
|
|
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
|
|
printk("TxmBuffer[%d][%d] = %x\n", i, j,
|
|
le32_to_cpu(*(unsigned int *)
|
|
lp->TxmBuffer[i][j]));
|
|
}
|
|
}
|
|
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
|
|
for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
|
|
printk("RcvBuffer[%d][%d] = %x\n", i, j,
|
|
le32_to_cpu(*(unsigned int *)
|
|
lp->RcvBuffer[i][j]));
|
|
}
|
|
}
|
|
printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
|
|
INL(&lp->evm_saa9730_regs->InterruptBlock1));
|
|
printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
|
|
INL(&lp->evm_saa9730_regs->InterruptStatus1));
|
|
printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
|
|
INL(&lp->evm_saa9730_regs->InterruptEnable1));
|
|
printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
|
|
INL(&lp->lan_saa9730_regs->Ok2Use));
|
|
printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
|
|
printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);
|
|
printk("lp->PendingTxmBufferIndex = %x\n",
|
|
lp->PendingTxmBufferIndex);
|
|
printk("lp->PendingTxmPacketIndex = %x\n",
|
|
lp->PendingTxmPacketIndex);
|
|
printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n",
|
|
INL(&lp->lan_saa9730_regs->LanDmaCtl));
|
|
printk("lp->lan_saa9730_regs->DmaStatus = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DmaStatus));
|
|
printk("lp->lan_saa9730_regs->CamCtl = %x\n",
|
|
INL(&lp->lan_saa9730_regs->CamCtl));
|
|
printk("lp->lan_saa9730_regs->TxCtl = %x\n",
|
|
INL(&lp->lan_saa9730_regs->TxCtl));
|
|
printk("lp->lan_saa9730_regs->TxStatus = %x\n",
|
|
INL(&lp->lan_saa9730_regs->TxStatus));
|
|
printk("lp->lan_saa9730_regs->RxCtl = %x\n",
|
|
INL(&lp->lan_saa9730_regs->RxCtl));
|
|
printk("lp->lan_saa9730_regs->RxStatus = %x\n",
|
|
INL(&lp->lan_saa9730_regs->RxStatus));
|
|
for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
|
|
OUTL(i, &lp->lan_saa9730_regs->CamAddress);
|
|
printk("lp->lan_saa9730_regs->CamData = %x\n",
|
|
INL(&lp->lan_saa9730_regs->CamData));
|
|
}
|
|
printk("lp->stats.tx_packets = %lx\n", lp->stats.tx_packets);
|
|
printk("lp->stats.tx_errors = %lx\n", lp->stats.tx_errors);
|
|
printk("lp->stats.tx_aborted_errors = %lx\n",
|
|
lp->stats.tx_aborted_errors);
|
|
printk("lp->stats.tx_window_errors = %lx\n",
|
|
lp->stats.tx_window_errors);
|
|
printk("lp->stats.tx_carrier_errors = %lx\n",
|
|
lp->stats.tx_carrier_errors);
|
|
printk("lp->stats.tx_fifo_errors = %lx\n",
|
|
lp->stats.tx_fifo_errors);
|
|
printk("lp->stats.tx_heartbeat_errors = %lx\n",
|
|
lp->stats.tx_heartbeat_errors);
|
|
printk("lp->stats.collisions = %lx\n", lp->stats.collisions);
|
|
|
|
printk("lp->stats.rx_packets = %lx\n", lp->stats.rx_packets);
|
|
printk("lp->stats.rx_errors = %lx\n", lp->stats.rx_errors);
|
|
printk("lp->stats.rx_dropped = %lx\n", lp->stats.rx_dropped);
|
|
printk("lp->stats.rx_crc_errors = %lx\n", lp->stats.rx_crc_errors);
|
|
printk("lp->stats.rx_frame_errors = %lx\n",
|
|
lp->stats.rx_frame_errors);
|
|
printk("lp->stats.rx_fifo_errors = %lx\n",
|
|
lp->stats.rx_fifo_errors);
|
|
printk("lp->stats.rx_length_errors = %lx\n",
|
|
lp->stats.rx_length_errors);
|
|
|
|
printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DebugPCIMasterAddr));
|
|
printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DebugLanTxStateMachine));
|
|
printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DebugLanRxStateMachine));
|
|
printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DebugLanTxFifoPointers));
|
|
printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DebugLanRxFifoPointers));
|
|
printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n",
|
|
INL(&lp->lan_saa9730_regs->DebugLanCtlStateMachine));
|
|
}
|
|
|
|
static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp)
|
|
{
|
|
int i, j;
|
|
|
|
/* Init RX buffers */
|
|
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
|
|
for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
|
|
*(unsigned int *) lp->RcvBuffer[i][j] =
|
|
cpu_to_le32(RXSF_READY <<
|
|
RX_STAT_CTL_OWNER_SHF);
|
|
}
|
|
}
|
|
|
|
/* Init TX buffers */
|
|
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
|
|
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
|
|
*(unsigned int *) lp->TxmBuffer[i][j] =
|
|
cpu_to_le32(TXSF_EMPTY <<
|
|
TX_STAT_CTL_OWNER_SHF);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp)
|
|
{
|
|
unsigned int mem_size;
|
|
void *Pa;
|
|
unsigned int i, j, RcvBufferSize, TxmBufferSize;
|
|
unsigned int buffer_start;
|
|
|
|
/*
|
|
* Allocate all RX and TX packets in one chunk.
|
|
* The Rx and Tx packets must be PACKET_SIZE aligned.
|
|
*/
|
|
mem_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) *
|
|
LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) +
|
|
LAN_SAA9730_PACKET_SIZE;
|
|
buffer_start =
|
|
(unsigned int) kmalloc(mem_size, GFP_DMA | GFP_KERNEL);
|
|
|
|
if (!buffer_start)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Set DMA buffer to kseg1 (uncached).
|
|
* Make sure to flush before using it uncached.
|
|
*/
|
|
Pa = (void *) KSEG1ADDR((buffer_start + LAN_SAA9730_PACKET_SIZE) &
|
|
~(LAN_SAA9730_PACKET_SIZE - 1));
|
|
dma_cache_wback_inv((unsigned long) Pa, mem_size);
|
|
|
|
/* Initialize buffer space */
|
|
RcvBufferSize = LAN_SAA9730_PACKET_SIZE;
|
|
TxmBufferSize = LAN_SAA9730_PACKET_SIZE;
|
|
lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE;
|
|
lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE;
|
|
|
|
/* Init RX buffers */
|
|
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
|
|
for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
|
|
*(unsigned int *) Pa =
|
|
cpu_to_le32(RXSF_READY <<
|
|
RX_STAT_CTL_OWNER_SHF);
|
|
lp->RcvBuffer[i][j] = (unsigned int) Pa;
|
|
Pa += RcvBufferSize;
|
|
}
|
|
}
|
|
|
|
/* Init TX buffers */
|
|
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
|
|
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
|
|
*(unsigned int *) Pa =
|
|
cpu_to_le32(TXSF_EMPTY <<
|
|
TX_STAT_CTL_OWNER_SHF);
|
|
lp->TxmBuffer[i][j] = (unsigned int) Pa;
|
|
Pa += TxmBufferSize;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set rx buffer A and rx buffer B to point to the first two buffer
|
|
* spaces.
|
|
*/
|
|
OUTL(PHYSADDR(lp->RcvBuffer[0][0]),
|
|
&lp->lan_saa9730_regs->RxBuffA);
|
|
OUTL(PHYSADDR(lp->RcvBuffer[1][0]),
|
|
&lp->lan_saa9730_regs->RxBuffB);
|
|
|
|
/* Initialize Buffer Index */
|
|
lp->NextRcvPacketIndex = 0;
|
|
lp->NextRcvToUseIsA = 1;
|
|
|
|
/* Set current buffer index & next availble packet index */
|
|
lp->NextTxmPacketIndex = 0;
|
|
lp->NextTxmBufferIndex = 0;
|
|
lp->PendingTxmPacketIndex = 0;
|
|
lp->PendingTxmBufferIndex = 0;
|
|
|
|
/*
|
|
* Set txm_buf_a and txm_buf_b to point to the first two buffer
|
|
* space
|
|
*/
|
|
OUTL(PHYSADDR(lp->TxmBuffer[0][0]),
|
|
&lp->lan_saa9730_regs->TxBuffA);
|
|
OUTL(PHYSADDR(lp->TxmBuffer[1][0]),
|
|
&lp->lan_saa9730_regs->TxBuffB);
|
|
|
|
/* Set packet number */
|
|
OUTL((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
|
|
(lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
|
|
(lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
|
|
(lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
|
|
&lp->lan_saa9730_regs->PacketCount);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
|
|
{
|
|
unsigned int i;
|
|
unsigned char *NetworkAddress;
|
|
|
|
NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0];
|
|
|
|
for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
|
|
/* First set address to where data is written */
|
|
OUTL(i, &lp->lan_saa9730_regs->CamAddress);
|
|
OUTL((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
|
|
| (NetworkAddress[2] << 8) | NetworkAddress[3],
|
|
&lp->lan_saa9730_regs->CamData);
|
|
NetworkAddress += 4;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_cam_init(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
unsigned int i;
|
|
|
|
/* Copy MAC-address into all entries. */
|
|
for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) {
|
|
memcpy((unsigned char *) lp->PhysicalAddress[i],
|
|
(unsigned char *) dev->dev_addr, 6);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
|
|
{
|
|
int i, l;
|
|
|
|
/* Check link status, spin here till station is not busy. */
|
|
i = 0;
|
|
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
|
|
i++;
|
|
if (i > 100) {
|
|
printk("Error: lan_saa9730_mii_init: timeout\n");
|
|
return -1;
|
|
}
|
|
mdelay(1); /* wait 1 ms. */
|
|
}
|
|
|
|
/* Now set the control and address register. */
|
|
OUTL(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
|
|
&lp->lan_saa9730_regs->StationMgmtCtl);
|
|
|
|
/* check link status, spin here till station is not busy */
|
|
i = 0;
|
|
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
|
|
i++;
|
|
if (i > 100) {
|
|
printk("Error: lan_saa9730_mii_init: timeout\n");
|
|
return -1;
|
|
}
|
|
mdelay(1); /* wait 1 ms. */
|
|
}
|
|
|
|
/* Wait for 1 ms. */
|
|
mdelay(1);
|
|
|
|
/* Check the link status. */
|
|
if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
|
|
PHY_STATUS_LINK_UP) {
|
|
/* Link is up. */
|
|
return 0;
|
|
} else {
|
|
/* Link is down, reset the PHY first. */
|
|
|
|
/* set PHY address = 'CONTROL' */
|
|
OUTL(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
|
|
&lp->lan_saa9730_regs->StationMgmtCtl);
|
|
|
|
/* Wait for 1 ms. */
|
|
mdelay(1);
|
|
|
|
/* set 'CONTROL' = force reset and renegotiate */
|
|
OUTL(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
|
|
PHY_CONTROL_RESTART_AUTO_NEG,
|
|
&lp->lan_saa9730_regs->StationMgmtData);
|
|
|
|
/* Wait for 50 ms. */
|
|
mdelay(50);
|
|
|
|
/* set 'BUSY' to start operation */
|
|
OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
|
|
PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
|
|
|
|
/* await completion */
|
|
i = 0;
|
|
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
|
|
MD_CA_BUSY) {
|
|
i++;
|
|
if (i > 100) {
|
|
printk
|
|
("Error: lan_saa9730_mii_init: timeout\n");
|
|
return -1;
|
|
}
|
|
mdelay(1); /* wait 1 ms. */
|
|
}
|
|
|
|
/* Wait for 1 ms. */
|
|
mdelay(1);
|
|
|
|
for (l = 0; l < 2; l++) {
|
|
/* set PHY address = 'STATUS' */
|
|
OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
|
|
PHY_STATUS,
|
|
&lp->lan_saa9730_regs->StationMgmtCtl);
|
|
|
|
/* await completion */
|
|
i = 0;
|
|
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
|
|
MD_CA_BUSY) {
|
|
i++;
|
|
if (i > 100) {
|
|
printk
|
|
("Error: lan_saa9730_mii_init: timeout\n");
|
|
return -1;
|
|
}
|
|
mdelay(1); /* wait 1 ms. */
|
|
}
|
|
|
|
/* wait for 3 sec. */
|
|
mdelay(3000);
|
|
|
|
/* check the link status */
|
|
if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
|
|
PHY_STATUS_LINK_UP) {
|
|
/* link is up */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
|
|
{
|
|
/* Initialize DMA control register. */
|
|
OUTL((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
|
|
(LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
|
|
(LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
|
|
| DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
|
|
DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
|
|
&lp->lan_saa9730_regs->LanDmaCtl);
|
|
|
|
/* Initial MAC control register. */
|
|
OUTL((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
|
|
&lp->lan_saa9730_regs->MacCtl);
|
|
|
|
/* Initialize CAM control register. */
|
|
OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
|
|
&lp->lan_saa9730_regs->CamCtl);
|
|
|
|
/*
|
|
* Initialize CAM enable register, only turn on first entry, should
|
|
* contain own addr.
|
|
*/
|
|
OUTL(0x0001, &lp->lan_saa9730_regs->CamEnable);
|
|
|
|
/* Initialize Tx control register */
|
|
OUTL(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
|
|
|
|
/* Initialize Rcv control register */
|
|
OUTL(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
|
|
|
|
/* Reset DMA engine */
|
|
OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_stop(struct lan_saa9730_private *lp)
|
|
{
|
|
int i;
|
|
|
|
/* Stop DMA first */
|
|
OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) &
|
|
~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
|
|
&lp->lan_saa9730_regs->LanDmaCtl);
|
|
|
|
/* Set the SW Reset bits in DMA and MAC control registers */
|
|
OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
|
|
OUTL(INL(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
|
|
&lp->lan_saa9730_regs->MacCtl);
|
|
|
|
/*
|
|
* Wait for MAC reset to have finished. The reset bit is auto cleared
|
|
* when the reset is done.
|
|
*/
|
|
i = 0;
|
|
while (INL(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) {
|
|
i++;
|
|
if (i > 100) {
|
|
printk
|
|
("Error: lan_sa9730_stop: MAC reset timeout\n");
|
|
return -1;
|
|
}
|
|
mdelay(1); /* wait 1 ms. */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
|
|
{
|
|
/* Stop lan controller. */
|
|
lan_saa9730_stop(lp);
|
|
|
|
OUTL(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
|
|
&lp->lan_saa9730_regs->Timeout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_start(struct lan_saa9730_private *lp)
|
|
{
|
|
lan_saa9730_buffer_init(lp);
|
|
|
|
/* Initialize Rx Buffer Index */
|
|
lp->NextRcvPacketIndex = 0;
|
|
lp->NextRcvToUseIsA = 1;
|
|
|
|
/* Set current buffer index & next availble packet index */
|
|
lp->NextTxmPacketIndex = 0;
|
|
lp->NextTxmBufferIndex = 0;
|
|
lp->PendingTxmPacketIndex = 0;
|
|
lp->PendingTxmBufferIndex = 0;
|
|
|
|
OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
|
|
DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
|
|
|
|
/* For Tx, turn on MAC then DMA */
|
|
OUTL(INL(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
|
|
&lp->lan_saa9730_regs->TxCtl);
|
|
|
|
/* For Rx, turn on DMA then MAC */
|
|
OUTL(INL(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
|
|
&lp->lan_saa9730_regs->RxCtl);
|
|
|
|
/* Set Ok2Use to let hardware owns the buffers */
|
|
OUTL(OK2USE_RX_A | OK2USE_RX_B | OK2USE_TX_A | OK2USE_TX_B,
|
|
&lp->lan_saa9730_regs->Ok2Use);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_restart(struct lan_saa9730_private *lp)
|
|
{
|
|
lan_saa9730_stop(lp);
|
|
lan_saa9730_start(lp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_tx(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
unsigned int *pPacket;
|
|
unsigned int tx_status;
|
|
|
|
if (lan_saa9730_debug > 5)
|
|
printk("lan_saa9730_tx interrupt\n");
|
|
|
|
/* Clear interrupt. */
|
|
OUTL(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
|
|
|
|
while (1) {
|
|
pPacket =
|
|
(unsigned int *) lp->TxmBuffer[lp->
|
|
PendingTxmBufferIndex]
|
|
[lp->PendingTxmPacketIndex];
|
|
|
|
/* Get status of first packet transmitted. */
|
|
tx_status = le32_to_cpu(*pPacket);
|
|
|
|
/* Check ownership. */
|
|
if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
|
|
(TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break;
|
|
|
|
/* Check for error. */
|
|
if (tx_status & TX_STAT_CTL_ERROR_MSK) {
|
|
if (lan_saa9730_debug > 1)
|
|
printk("lan_saa9730_tx: tx error = %x\n",
|
|
tx_status);
|
|
|
|
lp->stats.tx_errors++;
|
|
if (tx_status &
|
|
(TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.tx_aborted_errors++;
|
|
if (tx_status &
|
|
(TX_STATUS_LATE_COLL <<
|
|
TX_STAT_CTL_STATUS_SHF)) lp->stats.
|
|
tx_window_errors++;
|
|
if (tx_status &
|
|
(TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.tx_carrier_errors++;
|
|
if (tx_status &
|
|
(TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.tx_fifo_errors++;
|
|
if (tx_status &
|
|
(TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.tx_heartbeat_errors++;
|
|
|
|
lp->stats.collisions +=
|
|
tx_status & TX_STATUS_TX_COLL_MSK;
|
|
}
|
|
|
|
/* Free buffer. */
|
|
*pPacket =
|
|
cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF);
|
|
|
|
/* Update pending index pointer. */
|
|
lp->PendingTxmPacketIndex++;
|
|
if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
|
|
lp->PendingTxmPacketIndex = 0;
|
|
lp->PendingTxmBufferIndex ^= 1;
|
|
}
|
|
}
|
|
|
|
/* Make sure A and B are available to hardware. */
|
|
OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
|
|
|
|
if (netif_queue_stopped(dev)) {
|
|
/* The tx buffer is no longer full. */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_rx(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
int len = 0;
|
|
struct sk_buff *skb = 0;
|
|
unsigned int rx_status;
|
|
int BufferIndex;
|
|
int PacketIndex;
|
|
unsigned int *pPacket;
|
|
unsigned char *pData;
|
|
|
|
if (lan_saa9730_debug > 5)
|
|
printk("lan_saa9730_rx interrupt\n");
|
|
|
|
/* Clear receive interrupts. */
|
|
OUTL(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
|
|
DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
|
|
|
|
/* Address next packet */
|
|
if (lp->NextRcvToUseIsA)
|
|
BufferIndex = 0;
|
|
else
|
|
BufferIndex = 1;
|
|
PacketIndex = lp->NextRcvPacketIndex;
|
|
pPacket = (unsigned int *) lp->RcvBuffer[BufferIndex][PacketIndex];
|
|
rx_status = le32_to_cpu(*pPacket);
|
|
|
|
/* Process each packet. */
|
|
while ((rx_status & RX_STAT_CTL_OWNER_MSK) ==
|
|
(RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) {
|
|
/* Check the rx status. */
|
|
if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) {
|
|
/* Received packet is good. */
|
|
len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >>
|
|
RX_STAT_CTL_LENGTH_SHF;
|
|
|
|
pData = (unsigned char *) pPacket;
|
|
pData += 4;
|
|
skb = dev_alloc_skb(len + 2);
|
|
if (skb == 0) {
|
|
printk
|
|
("%s: Memory squeeze, deferring packet.\n",
|
|
dev->name);
|
|
lp->stats.rx_dropped++;
|
|
} else {
|
|
lp->stats.rx_bytes += len;
|
|
lp->stats.rx_packets++;
|
|
skb->dev = dev;
|
|
skb_reserve(skb, 2); /* 16 byte align */
|
|
skb_put(skb, len); /* make room */
|
|
eth_copy_and_sum(skb,
|
|
(unsigned char *) pData,
|
|
len, 0);
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
}
|
|
} else {
|
|
/* We got an error packet. */
|
|
if (lan_saa9730_debug > 2)
|
|
printk
|
|
("lan_saa9730_rx: We got an error packet = %x\n",
|
|
rx_status);
|
|
|
|
lp->stats.rx_errors++;
|
|
if (rx_status &
|
|
(RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.rx_crc_errors++;
|
|
if (rx_status &
|
|
(RX_STATUS_ALIGN_ERR <<
|
|
RX_STAT_CTL_STATUS_SHF)) lp->stats.
|
|
rx_frame_errors++;
|
|
if (rx_status &
|
|
(RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.rx_fifo_errors++;
|
|
if (rx_status &
|
|
(RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF))
|
|
lp->stats.rx_length_errors++;
|
|
}
|
|
|
|
/* Indicate we have processed the buffer. */
|
|
*pPacket =
|
|
cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
|
|
|
|
/* Go to next packet in sequence. */
|
|
lp->NextRcvPacketIndex++;
|
|
if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) {
|
|
lp->NextRcvPacketIndex = 0;
|
|
if (BufferIndex) {
|
|
lp->NextRcvToUseIsA = 1;
|
|
} else {
|
|
lp->NextRcvToUseIsA = 0;
|
|
}
|
|
}
|
|
OUTL(OK2USE_RX_A | OK2USE_RX_B,
|
|
&lp->lan_saa9730_regs->Ok2Use);
|
|
|
|
/* Address next packet */
|
|
if (lp->NextRcvToUseIsA)
|
|
BufferIndex = 0;
|
|
else
|
|
BufferIndex = 1;
|
|
PacketIndex = lp->NextRcvPacketIndex;
|
|
pPacket =
|
|
(unsigned int *) lp->
|
|
RcvBuffer[BufferIndex][PacketIndex];
|
|
rx_status = le32_to_cpu(*pPacket);
|
|
}
|
|
|
|
/* Make sure A and B are available to hardware. */
|
|
OUTL(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id,
|
|
struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
|
|
if (lan_saa9730_debug > 5)
|
|
printk("lan_saa9730_interrupt\n");
|
|
|
|
/* Disable the EVM LAN interrupt. */
|
|
evm_saa9730_block_lan_int(lp);
|
|
|
|
/* Clear the EVM LAN interrupt. */
|
|
evm_saa9730_clear_lan_int(lp);
|
|
|
|
/* Service pending transmit interrupts. */
|
|
if (INL(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT)
|
|
lan_saa9730_tx(dev);
|
|
|
|
/* Service pending receive interrupts. */
|
|
if (INL(&lp->lan_saa9730_regs->DmaStatus) &
|
|
(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
|
|
DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev);
|
|
|
|
/* Enable the EVM LAN interrupt. */
|
|
evm_saa9730_unblock_lan_int(lp);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int lan_saa9730_open_fail(struct net_device *dev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int lan_saa9730_open(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
|
|
/* Associate IRQ with lan_saa9730_interrupt */
|
|
if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth",
|
|
dev)) {
|
|
printk("lan_saa9730_open: Can't get irq %d\n", dev->irq);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Enable the Lan interrupt in the event manager. */
|
|
evm_saa9730_enable_lan_int(lp);
|
|
|
|
/* Start the LAN controller */
|
|
if (lan_saa9730_start(lp))
|
|
return -1;
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_write(struct lan_saa9730_private *lp,
|
|
struct sk_buff *skb, int skblen)
|
|
{
|
|
unsigned char *pbData = skb->data;
|
|
unsigned int len = skblen;
|
|
unsigned char *pbPacketData;
|
|
unsigned int tx_status;
|
|
int BufferIndex;
|
|
int PacketIndex;
|
|
|
|
if (lan_saa9730_debug > 5)
|
|
printk("lan_saa9730_write: skb=%08x\n",
|
|
(unsigned int) skb);
|
|
|
|
BufferIndex = lp->NextTxmBufferIndex;
|
|
PacketIndex = lp->NextTxmPacketIndex;
|
|
|
|
tx_status =
|
|
le32_to_cpu(*(unsigned int *) lp->
|
|
TxmBuffer[BufferIndex][PacketIndex]);
|
|
if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
|
|
(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) {
|
|
if (lan_saa9730_debug > 4)
|
|
printk
|
|
("lan_saa9730_write: Tx buffer not available: tx_status = %x\n",
|
|
tx_status);
|
|
return -1;
|
|
}
|
|
|
|
lp->NextTxmPacketIndex++;
|
|
if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
|
|
lp->NextTxmPacketIndex = 0;
|
|
lp->NextTxmBufferIndex ^= 1;
|
|
}
|
|
|
|
pbPacketData =
|
|
(unsigned char *) lp->TxmBuffer[BufferIndex][PacketIndex];
|
|
pbPacketData += 4;
|
|
|
|
/* copy the bits */
|
|
memcpy(pbPacketData, pbData, len);
|
|
|
|
/* Set transmit status for hardware */
|
|
*(unsigned int *) lp->TxmBuffer[BufferIndex][PacketIndex] =
|
|
cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) |
|
|
(TX_STAT_CTL_INT_AFTER_TX << TX_STAT_CTL_FRAME_SHF)
|
|
| (len << TX_STAT_CTL_LENGTH_SHF));
|
|
|
|
/* Set hardware tx buffer. */
|
|
OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lan_saa9730_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
|
|
/* Transmitter timeout, serious problems */
|
|
lp->stats.tx_errors++;
|
|
printk("%s: transmit timed out, reset\n", dev->name);
|
|
/*show_saa9730_regs(lp); */
|
|
lan_saa9730_restart(lp);
|
|
|
|
dev->trans_start = jiffies;
|
|
netif_start_queue(dev);
|
|
}
|
|
|
|
static int lan_saa9730_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
unsigned long flags;
|
|
int skblen;
|
|
int len;
|
|
|
|
if (lan_saa9730_debug > 4)
|
|
printk("Send packet: skb=%08x\n", (unsigned int) skb);
|
|
|
|
skblen = skb->len;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen;
|
|
|
|
if (lan_saa9730_write(lp, skb, skblen)) {
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
printk("Error when writing packet to controller: skb=%08x\n",
|
|
(unsigned int) skb);
|
|
netif_stop_queue(dev);
|
|
return -1;
|
|
}
|
|
|
|
lp->stats.tx_bytes += len;
|
|
lp->stats.tx_packets++;
|
|
|
|
dev->trans_start = jiffies;
|
|
netif_start_queue(dev);
|
|
dev_kfree_skb(skb);
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan_saa9730_close(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
|
|
if (lan_saa9730_debug > 1)
|
|
printk("lan_saa9730_close:\n");
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Disable the Lan interrupt in the event manager. */
|
|
evm_saa9730_disable_lan_int(lp);
|
|
|
|
/* Stop the controller */
|
|
if (lan_saa9730_stop(lp))
|
|
return -1;
|
|
|
|
free_irq(dev->irq, (void *) dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *lan_saa9730_get_stats(struct net_device
|
|
*dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
static void lan_saa9730_set_multicast(struct net_device *dev)
|
|
{
|
|
struct lan_saa9730_private *lp =
|
|
(struct lan_saa9730_private *) dev->priv;
|
|
|
|
/* Stop the controller */
|
|
lan_saa9730_stop(lp);
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
/* accept all packets */
|
|
OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
|
|
CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
|
|
&lp->lan_saa9730_regs->CamCtl);
|
|
} else {
|
|
if (dev->flags & IFF_ALLMULTI) {
|
|
/* accept all multicast packets */
|
|
OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
|
|
CAM_CONTROL_BROAD_ACC,
|
|
&lp->lan_saa9730_regs->CamCtl);
|
|
} else {
|
|
/*
|
|
* Will handle the multicast stuff later. -carstenl
|
|
*/
|
|
}
|
|
}
|
|
|
|
lan_saa9730_restart(lp);
|
|
}
|
|
|
|
|
|
static void __devexit saa9730_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
unregister_netdev(dev);
|
|
|
|
if (dev->priv)
|
|
kfree(dev->priv);
|
|
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
|
|
|
|
static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq)
|
|
{
|
|
struct lan_saa9730_private *lp;
|
|
unsigned char ethernet_addr[6];
|
|
int ret = 0;
|
|
|
|
dev->open = lan_saa9730_open_fail;
|
|
|
|
if (get_ethernet_addr(ethernet_addr))
|
|
return -ENODEV;
|
|
|
|
memcpy(dev->dev_addr, ethernet_addr, 6);
|
|
dev->base_addr = ioaddr;
|
|
dev->irq = irq;
|
|
|
|
/*
|
|
* Make certain the data structures used by the controller are aligned
|
|
* and DMAble.
|
|
*/
|
|
/*
|
|
* XXX: that is obviously broken - kfree() won't be happy with us.
|
|
*/
|
|
lp = (struct lan_saa9730_private *) (((unsigned long)
|
|
kmalloc(sizeof(*lp) + 7,
|
|
GFP_DMA | GFP_KERNEL)
|
|
+ 7) & ~7);
|
|
|
|
if (!lp)
|
|
return -ENOMEM;
|
|
|
|
dev->priv = lp;
|
|
memset(lp, 0, sizeof(*lp));
|
|
|
|
/* Set SAA9730 LAN base address. */
|
|
lp->lan_saa9730_regs = (t_lan_saa9730_regmap *) (ioaddr +
|
|
SAA9730_LAN_REGS_ADDR);
|
|
|
|
/* Set SAA9730 EVM base address. */
|
|
lp->evm_saa9730_regs = (t_evm_saa9730_regmap *) (ioaddr +
|
|
SAA9730_EVM_REGS_ADDR);
|
|
|
|
/* Allocate LAN RX/TX frame buffer space. */
|
|
/* FIXME: a leak */
|
|
if ((ret = lan_saa9730_allocate_buffers(lp)))
|
|
goto out;
|
|
|
|
/* Stop LAN controller. */
|
|
if ((ret = lan_saa9730_stop(lp)))
|
|
goto out;
|
|
|
|
/* Initialize CAM registers. */
|
|
if ((ret = lan_saa9730_cam_init(dev)))
|
|
goto out;
|
|
|
|
/* Initialize MII registers. */
|
|
if ((ret = lan_saa9730_mii_init(lp)))
|
|
goto out;
|
|
|
|
/* Initialize control registers. */
|
|
if ((ret = lan_saa9730_control_init(lp)))
|
|
goto out;
|
|
|
|
/* Load CAM registers. */
|
|
if ((ret = lan_saa9730_cam_load(lp)))
|
|
goto out;
|
|
|
|
/* Initialize DMA context registers. */
|
|
if ((ret = lan_saa9730_dma_init(lp)))
|
|
goto out;
|
|
|
|
spin_lock_init(&lp->lock);
|
|
|
|
dev->open = lan_saa9730_open;
|
|
dev->hard_start_xmit = lan_saa9730_start_xmit;
|
|
dev->stop = lan_saa9730_close;
|
|
dev->get_stats = lan_saa9730_get_stats;
|
|
dev->set_multicast_list = lan_saa9730_set_multicast;
|
|
dev->tx_timeout = lan_saa9730_tx_timeout;
|
|
dev->watchdog_timeo = (HZ >> 1);
|
|
dev->dma = 0;
|
|
|
|
ret = register_netdev(dev);
|
|
if (ret)
|
|
goto out;
|
|
return 0;
|
|
|
|
out:
|
|
if (dev->priv)
|
|
kfree(dev->priv);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
unsigned int pci_ioaddr;
|
|
int err;
|
|
|
|
if (lan_saa9730_debug > 1)
|
|
printk("saa9730.c: PCI bios is present, checking for devices...\n");
|
|
|
|
err = -ENOMEM;
|
|
dev = alloc_etherdev(0);
|
|
if (!dev)
|
|
goto out;
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR "Cannot enable PCI device, aborting.\n");
|
|
goto out1;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_MODULE_NAME);
|
|
if (err) {
|
|
printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
|
|
goto out2;
|
|
}
|
|
|
|
pci_irq_line = pdev->irq;
|
|
/* LAN base address in located at BAR 1. */
|
|
|
|
pci_ioaddr = pci_resource_start(pdev, 1);
|
|
pci_set_master(pdev);
|
|
|
|
printk("Found SAA9730 (PCI) at %#x, irq %d.\n",
|
|
pci_ioaddr, pci_irq_line);
|
|
|
|
err = lan_saa9730_init(dev, pci_ioaddr, pci_irq_line);
|
|
if (err) {
|
|
printk("Lan init failed");
|
|
goto out2;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
return 0;
|
|
|
|
out2:
|
|
pci_disable_device(pdev);
|
|
out1:
|
|
free_netdev(dev);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
|
|
static struct pci_driver saa9730_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = saa9730_pci_tbl,
|
|
.probe = saa9730_init_one,
|
|
.remove = __devexit_p(saa9730_remove_one),
|
|
};
|
|
|
|
|
|
static int __init saa9730_init(void)
|
|
{
|
|
return pci_module_init(&saa9730_driver);
|
|
}
|
|
|
|
static void __exit saa9730_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&saa9730_driver);
|
|
}
|
|
|
|
module_init(saa9730_init);
|
|
module_exit(saa9730_cleanup);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|