mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
b87537d9e2
KernelThreadSanitizer (ktsan) has shown that the down_read_trylock() of
mmap_sem in try_to_unmap_one() (when going to set PageMlocked on a page
found mapped in a VM_LOCKED vma) is ineffective against races with
exit_mmap()'s munlock_vma_pages_all(), because mmap_sem is not held when
tearing down an mm.
But that's okay, those races are benign; and although we've believed for
years in that ugly down_read_trylock(), it's unsuitable for the job, and
frustrates the good intention of setting PageMlocked when it fails.
It just doesn't matter if here we read vm_flags an instant before or after
a racing mlock() or munlock() or exit_mmap() sets or clears VM_LOCKED: the
syscalls (or exit) work their way up the address space (taking pt locks
after updating vm_flags) to establish the final state.
We do still need to be careful never to mark a page Mlocked (hence
unevictable) by any race that will not be corrected shortly after. The
page lock protects from many of the races, but not all (a page is not
necessarily locked when it's unmapped). But the pte lock we just dropped
is good to cover the rest (and serializes even with
munlock_vma_pages_all(), so no special barriers required): now hold on to
the pte lock while calling mlock_vma_page(). Is that lock ordering safe?
Yes, that's how follow_page_pte() calls it, and how page_remove_rmap()
calls the complementary clear_page_mlock().
This fixes the following case (though not a case which anyone has
complained of), which mmap_sem did not: truncation's preliminary
unmap_mapping_range() is supposed to remove even the anonymous COWs of
filecache pages, and that might race with try_to_unmap_one() on a
VM_LOCKED vma, so that mlock_vma_page() sets PageMlocked just after
zap_pte_range() unmaps the page, causing "Bad page state (mlocked)" when
freed. The pte lock protects against this.
You could say that it also protects against the more ordinary case, racing
with the preliminary unmapping of a filecache page itself: but in our
current tree, that's independently protected by i_mmap_rwsem; and that
race would be why "Bad page state (mlocked)" was seen before commit
48ec833b78
("Revert mm/memory.c: share the i_mmap_rwsem").
Vlastimil Babka points out another race which this patch protects against.
try_to_unmap_one() might reach its mlock_vma_page() TestSetPageMlocked a
moment after munlock_vma_pages_all() did its Phase 1 TestClearPageMlocked:
leaving PageMlocked and unevictable when it should be evictable. mmap_sem
is ineffective because exit_mmap() does not hold it; page lock ineffective
because __munlock_pagevec() only takes it afterwards, in Phase 2; pte lock
is effective because __munlock_pagevec_fill() takes it to get the page,
after VM_LOCKED was cleared from vm_flags, so visible to try_to_unmap_one.
Kirill Shutemov points out that if the compiler chooses to implement a
"vma->vm_flags &= VM_WHATEVER" or "vma->vm_flags |= VM_WHATEVER" operation
with an intermediate store of unrelated bits set, since I'm here foregoing
its usual protection by mmap_sem, try_to_unmap_one() might catch sight of
a spurious VM_LOCKED in vm_flags, and make the wrong decision. This does
not appear to be an immediate problem, but we may want to define vm_flags
accessors in future, to guard against such a possibility.
While we're here, make a related optimization in try_to_munmap_one(): if
it's doing TTU_MUNLOCK, then there's no point at all in descending the
page tables and getting the pt lock, unless the vma is VM_LOCKED. Yes,
that can change racily, but it can change racily even without the
optimization: it's not critical. Far better not to waste time here.
Stopped short of separating try_to_munlock_one() from try_to_munmap_one()
on this occasion, but that's probably the sensible next step - with a
rename, given that try_to_munlock()'s business is to try to set Mlocked.
Updated the unevictable-lru Documentation, to remove its reference to mmap
semaphore, but found a few more updates needed in just that area.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
613 lines
29 KiB
Plaintext
613 lines
29 KiB
Plaintext
==============================
|
|
UNEVICTABLE LRU INFRASTRUCTURE
|
|
==============================
|
|
|
|
========
|
|
CONTENTS
|
|
========
|
|
|
|
(*) The Unevictable LRU
|
|
|
|
- The unevictable page list.
|
|
- Memory control group interaction.
|
|
- Marking address spaces unevictable.
|
|
- Detecting Unevictable Pages.
|
|
- vmscan's handling of unevictable pages.
|
|
|
|
(*) mlock()'d pages.
|
|
|
|
- History.
|
|
- Basic management.
|
|
- mlock()/mlockall() system call handling.
|
|
- Filtering special vmas.
|
|
- munlock()/munlockall() system call handling.
|
|
- Migrating mlocked pages.
|
|
- Compacting mlocked pages.
|
|
- mmap(MAP_LOCKED) system call handling.
|
|
- munmap()/exit()/exec() system call handling.
|
|
- try_to_unmap().
|
|
- try_to_munlock() reverse map scan.
|
|
- Page reclaim in shrink_*_list().
|
|
|
|
|
|
============
|
|
INTRODUCTION
|
|
============
|
|
|
|
This document describes the Linux memory manager's "Unevictable LRU"
|
|
infrastructure and the use of this to manage several types of "unevictable"
|
|
pages.
|
|
|
|
The document attempts to provide the overall rationale behind this mechanism
|
|
and the rationale for some of the design decisions that drove the
|
|
implementation. The latter design rationale is discussed in the context of an
|
|
implementation description. Admittedly, one can obtain the implementation
|
|
details - the "what does it do?" - by reading the code. One hopes that the
|
|
descriptions below add value by provide the answer to "why does it do that?".
|
|
|
|
|
|
===================
|
|
THE UNEVICTABLE LRU
|
|
===================
|
|
|
|
The Unevictable LRU facility adds an additional LRU list to track unevictable
|
|
pages and to hide these pages from vmscan. This mechanism is based on a patch
|
|
by Larry Woodman of Red Hat to address several scalability problems with page
|
|
reclaim in Linux. The problems have been observed at customer sites on large
|
|
memory x86_64 systems.
|
|
|
|
To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
|
|
main memory will have over 32 million 4k pages in a single zone. When a large
|
|
fraction of these pages are not evictable for any reason [see below], vmscan
|
|
will spend a lot of time scanning the LRU lists looking for the small fraction
|
|
of pages that are evictable. This can result in a situation where all CPUs are
|
|
spending 100% of their time in vmscan for hours or days on end, with the system
|
|
completely unresponsive.
|
|
|
|
The unevictable list addresses the following classes of unevictable pages:
|
|
|
|
(*) Those owned by ramfs.
|
|
|
|
(*) Those mapped into SHM_LOCK'd shared memory regions.
|
|
|
|
(*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
|
|
|
|
The infrastructure may also be able to handle other conditions that make pages
|
|
unevictable, either by definition or by circumstance, in the future.
|
|
|
|
|
|
THE UNEVICTABLE PAGE LIST
|
|
-------------------------
|
|
|
|
The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
|
|
called the "unevictable" list and an associated page flag, PG_unevictable, to
|
|
indicate that the page is being managed on the unevictable list.
|
|
|
|
The PG_unevictable flag is analogous to, and mutually exclusive with, the
|
|
PG_active flag in that it indicates on which LRU list a page resides when
|
|
PG_lru is set.
|
|
|
|
The Unevictable LRU infrastructure maintains unevictable pages on an additional
|
|
LRU list for a few reasons:
|
|
|
|
(1) We get to "treat unevictable pages just like we treat other pages in the
|
|
system - which means we get to use the same code to manipulate them, the
|
|
same code to isolate them (for migrate, etc.), the same code to keep track
|
|
of the statistics, etc..." [Rik van Riel]
|
|
|
|
(2) We want to be able to migrate unevictable pages between nodes for memory
|
|
defragmentation, workload management and memory hotplug. The linux kernel
|
|
can only migrate pages that it can successfully isolate from the LRU
|
|
lists. If we were to maintain pages elsewhere than on an LRU-like list,
|
|
where they can be found by isolate_lru_page(), we would prevent their
|
|
migration, unless we reworked migration code to find the unevictable pages
|
|
itself.
|
|
|
|
|
|
The unevictable list does not differentiate between file-backed and anonymous,
|
|
swap-backed pages. This differentiation is only important while the pages are,
|
|
in fact, evictable.
|
|
|
|
The unevictable list benefits from the "arrayification" of the per-zone LRU
|
|
lists and statistics originally proposed and posted by Christoph Lameter.
|
|
|
|
The unevictable list does not use the LRU pagevec mechanism. Rather,
|
|
unevictable pages are placed directly on the page's zone's unevictable list
|
|
under the zone lru_lock. This allows us to prevent the stranding of pages on
|
|
the unevictable list when one task has the page isolated from the LRU and other
|
|
tasks are changing the "evictability" state of the page.
|
|
|
|
|
|
MEMORY CONTROL GROUP INTERACTION
|
|
--------------------------------
|
|
|
|
The unevictable LRU facility interacts with the memory control group [aka
|
|
memory controller; see Documentation/cgroups/memory.txt] by extending the
|
|
lru_list enum.
|
|
|
|
The memory controller data structure automatically gets a per-zone unevictable
|
|
list as a result of the "arrayification" of the per-zone LRU lists (one per
|
|
lru_list enum element). The memory controller tracks the movement of pages to
|
|
and from the unevictable list.
|
|
|
|
When a memory control group comes under memory pressure, the controller will
|
|
not attempt to reclaim pages on the unevictable list. This has a couple of
|
|
effects:
|
|
|
|
(1) Because the pages are "hidden" from reclaim on the unevictable list, the
|
|
reclaim process can be more efficient, dealing only with pages that have a
|
|
chance of being reclaimed.
|
|
|
|
(2) On the other hand, if too many of the pages charged to the control group
|
|
are unevictable, the evictable portion of the working set of the tasks in
|
|
the control group may not fit into the available memory. This can cause
|
|
the control group to thrash or to OOM-kill tasks.
|
|
|
|
|
|
MARKING ADDRESS SPACES UNEVICTABLE
|
|
----------------------------------
|
|
|
|
For facilities such as ramfs none of the pages attached to the address space
|
|
may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE
|
|
address space flag is provided, and this can be manipulated by a filesystem
|
|
using a number of wrapper functions:
|
|
|
|
(*) void mapping_set_unevictable(struct address_space *mapping);
|
|
|
|
Mark the address space as being completely unevictable.
|
|
|
|
(*) void mapping_clear_unevictable(struct address_space *mapping);
|
|
|
|
Mark the address space as being evictable.
|
|
|
|
(*) int mapping_unevictable(struct address_space *mapping);
|
|
|
|
Query the address space, and return true if it is completely
|
|
unevictable.
|
|
|
|
These are currently used in two places in the kernel:
|
|
|
|
(1) By ramfs to mark the address spaces of its inodes when they are created,
|
|
and this mark remains for the life of the inode.
|
|
|
|
(2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
|
|
|
|
Note that SHM_LOCK is not required to page in the locked pages if they're
|
|
swapped out; the application must touch the pages manually if it wants to
|
|
ensure they're in memory.
|
|
|
|
|
|
DETECTING UNEVICTABLE PAGES
|
|
---------------------------
|
|
|
|
The function page_evictable() in vmscan.c determines whether a page is
|
|
evictable or not using the query function outlined above [see section "Marking
|
|
address spaces unevictable"] to check the AS_UNEVICTABLE flag.
|
|
|
|
For address spaces that are so marked after being populated (as SHM regions
|
|
might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
|
|
the page tables for the region as does, for example, mlock(), nor need it make
|
|
any special effort to push any pages in the SHM_LOCK'd area to the unevictable
|
|
list. Instead, vmscan will do this if and when it encounters the pages during
|
|
a reclamation scan.
|
|
|
|
On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
|
|
the pages in the region and "rescue" them from the unevictable list if no other
|
|
condition is keeping them unevictable. If an unevictable region is destroyed,
|
|
the pages are also "rescued" from the unevictable list in the process of
|
|
freeing them.
|
|
|
|
page_evictable() also checks for mlocked pages by testing an additional page
|
|
flag, PG_mlocked (as wrapped by PageMlocked()), which is set when a page is
|
|
faulted into a VM_LOCKED vma, or found in a vma being VM_LOCKED.
|
|
|
|
|
|
VMSCAN'S HANDLING OF UNEVICTABLE PAGES
|
|
--------------------------------------
|
|
|
|
If unevictable pages are culled in the fault path, or moved to the unevictable
|
|
list at mlock() or mmap() time, vmscan will not encounter the pages until they
|
|
have become evictable again (via munlock() for example) and have been "rescued"
|
|
from the unevictable list. However, there may be situations where we decide,
|
|
for the sake of expediency, to leave a unevictable page on one of the regular
|
|
active/inactive LRU lists for vmscan to deal with. vmscan checks for such
|
|
pages in all of the shrink_{active|inactive|page}_list() functions and will
|
|
"cull" such pages that it encounters: that is, it diverts those pages to the
|
|
unevictable list for the zone being scanned.
|
|
|
|
There may be situations where a page is mapped into a VM_LOCKED VMA, but the
|
|
page is not marked as PG_mlocked. Such pages will make it all the way to
|
|
shrink_page_list() where they will be detected when vmscan walks the reverse
|
|
map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK,
|
|
shrink_page_list() will cull the page at that point.
|
|
|
|
To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
|
|
using putback_lru_page() - the inverse operation to isolate_lru_page() - after
|
|
dropping the page lock. Because the condition which makes the page unevictable
|
|
may change once the page is unlocked, putback_lru_page() will recheck the
|
|
unevictable state of a page that it places on the unevictable list. If the
|
|
page has become unevictable, putback_lru_page() removes it from the list and
|
|
retries, including the page_unevictable() test. Because such a race is a rare
|
|
event and movement of pages onto the unevictable list should be rare, these
|
|
extra evictabilty checks should not occur in the majority of calls to
|
|
putback_lru_page().
|
|
|
|
|
|
=============
|
|
MLOCKED PAGES
|
|
=============
|
|
|
|
The unevictable page list is also useful for mlock(), in addition to ramfs and
|
|
SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in
|
|
NOMMU situations, all mappings are effectively mlocked.
|
|
|
|
|
|
HISTORY
|
|
-------
|
|
|
|
The "Unevictable mlocked Pages" infrastructure is based on work originally
|
|
posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
|
|
Nick posted his patch as an alternative to a patch posted by Christoph Lameter
|
|
to achieve the same objective: hiding mlocked pages from vmscan.
|
|
|
|
In Nick's patch, he used one of the struct page LRU list link fields as a count
|
|
of VM_LOCKED VMAs that map the page. This use of the link field for a count
|
|
prevented the management of the pages on an LRU list, and thus mlocked pages
|
|
were not migratable as isolate_lru_page() could not find them, and the LRU list
|
|
link field was not available to the migration subsystem.
|
|
|
|
Nick resolved this by putting mlocked pages back on the lru list before
|
|
attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When
|
|
Nick's patch was integrated with the Unevictable LRU work, the count was
|
|
replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
|
|
mapped the page. More on this below.
|
|
|
|
|
|
BASIC MANAGEMENT
|
|
----------------
|
|
|
|
mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
|
|
pages. When such a page has been "noticed" by the memory management subsystem,
|
|
the page is marked with the PG_mlocked flag. This can be manipulated using the
|
|
PageMlocked() functions.
|
|
|
|
A PG_mlocked page will be placed on the unevictable list when it is added to
|
|
the LRU. Such pages can be "noticed" by memory management in several places:
|
|
|
|
(1) in the mlock()/mlockall() system call handlers;
|
|
|
|
(2) in the mmap() system call handler when mmapping a region with the
|
|
MAP_LOCKED flag;
|
|
|
|
(3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
|
|
flag
|
|
|
|
(4) in the fault path, if mlocked pages are "culled" in the fault path,
|
|
and when a VM_LOCKED stack segment is expanded; or
|
|
|
|
(5) as mentioned above, in vmscan:shrink_page_list() when attempting to
|
|
reclaim a page in a VM_LOCKED VMA via try_to_unmap()
|
|
|
|
all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
|
|
already have it set.
|
|
|
|
mlocked pages become unlocked and rescued from the unevictable list when:
|
|
|
|
(1) mapped in a range unlocked via the munlock()/munlockall() system calls;
|
|
|
|
(2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
|
|
unmapping at task exit;
|
|
|
|
(3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
|
|
or
|
|
|
|
(4) before a page is COW'd in a VM_LOCKED VMA.
|
|
|
|
|
|
mlock()/mlockall() SYSTEM CALL HANDLING
|
|
---------------------------------------
|
|
|
|
Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
|
|
for each VMA in the range specified by the call. In the case of mlockall(),
|
|
this is the entire active address space of the task. Note that mlock_fixup()
|
|
is used for both mlocking and munlocking a range of memory. A call to mlock()
|
|
an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
|
|
treated as a no-op, and mlock_fixup() simply returns.
|
|
|
|
If the VMA passes some filtering as described in "Filtering Special Vmas"
|
|
below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
|
|
off a subset of the VMA if the range does not cover the entire VMA. Once the
|
|
VMA has been merged or split or neither, mlock_fixup() will call
|
|
populate_vma_page_range() to fault in the pages via get_user_pages() and to
|
|
mark the pages as mlocked via mlock_vma_page().
|
|
|
|
Note that the VMA being mlocked might be mapped with PROT_NONE. In this case,
|
|
get_user_pages() will be unable to fault in the pages. That's okay. If pages
|
|
do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
|
|
fault path or in vmscan.
|
|
|
|
Also note that a page returned by get_user_pages() could be truncated or
|
|
migrated out from under us, while we're trying to mlock it. To detect this,
|
|
populate_vma_page_range() checks page_mapping() after acquiring the page lock.
|
|
If the page is still associated with its mapping, we'll go ahead and call
|
|
mlock_vma_page(). If the mapping is gone, we just unlock the page and move on.
|
|
In the worst case, this will result in a page mapped in a VM_LOCKED VMA
|
|
remaining on a normal LRU list without being PageMlocked(). Again, vmscan will
|
|
detect and cull such pages.
|
|
|
|
mlock_vma_page() will call TestSetPageMlocked() for each page returned by
|
|
get_user_pages(). We use TestSetPageMlocked() because the page might already
|
|
be mlocked by another task/VMA and we don't want to do extra work. We
|
|
especially do not want to count an mlocked page more than once in the
|
|
statistics. If the page was already mlocked, mlock_vma_page() need do nothing
|
|
more.
|
|
|
|
If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
|
|
page from the LRU, as it is likely on the appropriate active or inactive list
|
|
at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put
|
|
back the page - by calling putback_lru_page() - which will notice that the page
|
|
is now mlocked and divert the page to the zone's unevictable list. If
|
|
mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
|
|
it later if and when it attempts to reclaim the page.
|
|
|
|
|
|
FILTERING SPECIAL VMAS
|
|
----------------------
|
|
|
|
mlock_fixup() filters several classes of "special" VMAs:
|
|
|
|
1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind
|
|
these mappings are inherently pinned, so we don't need to mark them as
|
|
mlocked. In any case, most of the pages have no struct page in which to so
|
|
mark the page. Because of this, get_user_pages() will fail for these VMAs,
|
|
so there is no sense in attempting to visit them.
|
|
|
|
2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We
|
|
neither need nor want to mlock() these pages. However, to preserve the
|
|
prior behavior of mlock() - before the unevictable/mlock changes -
|
|
mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
|
|
allocate the huge pages and populate the ptes.
|
|
|
|
3) VMAs with VM_DONTEXPAND are generally userspace mappings of kernel pages,
|
|
such as the VDSO page, relay channel pages, etc. These pages
|
|
are inherently unevictable and are not managed on the LRU lists.
|
|
mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls
|
|
make_pages_present() to populate the ptes.
|
|
|
|
Note that for all of these special VMAs, mlock_fixup() does not set the
|
|
VM_LOCKED flag. Therefore, we won't have to deal with them later during
|
|
munlock(), munmap() or task exit. Neither does mlock_fixup() account these
|
|
VMAs against the task's "locked_vm".
|
|
|
|
|
|
munlock()/munlockall() SYSTEM CALL HANDLING
|
|
-------------------------------------------
|
|
|
|
The munlock() and munlockall() system calls are handled by the same functions -
|
|
do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
|
|
lock operation indicated by an argument. So, these system calls are also
|
|
handled by mlock_fixup(). Again, if called for an already munlocked VMA,
|
|
mlock_fixup() simply returns. Because of the VMA filtering discussed above,
|
|
VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be
|
|
ignored for munlock.
|
|
|
|
If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
|
|
specified range. The range is then munlocked via the function
|
|
populate_vma_page_range() - the same function used to mlock a VMA range -
|
|
passing a flag to indicate that munlock() is being performed.
|
|
|
|
Because the VMA access protections could have been changed to PROT_NONE after
|
|
faulting in and mlocking pages, get_user_pages() was unreliable for visiting
|
|
these pages for munlocking. Because we don't want to leave pages mlocked,
|
|
get_user_pages() was enhanced to accept a flag to ignore the permissions when
|
|
fetching the pages - all of which should be resident as a result of previous
|
|
mlocking.
|
|
|
|
For munlock(), populate_vma_page_range() unlocks individual pages by calling
|
|
munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked
|
|
flag using TestClearPageMlocked(). As with mlock_vma_page(),
|
|
munlock_vma_page() use the Test*PageMlocked() function to handle the case where
|
|
the page might have already been unlocked by another task. If the page was
|
|
mlocked, munlock_vma_page() updates that zone statistics for the number of
|
|
mlocked pages. Note, however, that at this point we haven't checked whether
|
|
the page is mapped by other VM_LOCKED VMAs.
|
|
|
|
We can't call try_to_munlock(), the function that walks the reverse map to
|
|
check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
|
|
try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
|
|
not be on an LRU list [more on these below]. However, the call to
|
|
isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So,
|
|
we go ahead and clear PG_mlocked up front, as this might be the only chance we
|
|
have. If we can successfully isolate the page, we go ahead and
|
|
try_to_munlock(), which will restore the PG_mlocked flag and update the zone
|
|
page statistics if it finds another VMA holding the page mlocked. If we fail
|
|
to isolate the page, we'll have left a potentially mlocked page on the LRU.
|
|
This is fine, because we'll catch it later if and if vmscan tries to reclaim
|
|
the page. This should be relatively rare.
|
|
|
|
|
|
MIGRATING MLOCKED PAGES
|
|
-----------------------
|
|
|
|
A page that is being migrated has been isolated from the LRU lists and is held
|
|
locked across unmapping of the page, updating the page's address space entry
|
|
and copying the contents and state, until the page table entry has been
|
|
replaced with an entry that refers to the new page. Linux supports migration
|
|
of mlocked pages and other unevictable pages. This involves simply moving the
|
|
PG_mlocked and PG_unevictable states from the old page to the new page.
|
|
|
|
Note that page migration can race with mlocking or munlocking of the same page.
|
|
This has been discussed from the mlock/munlock perspective in the respective
|
|
sections above. Both processes (migration and m[un]locking) hold the page
|
|
locked. This provides the first level of synchronization. Page migration
|
|
zeros out the page_mapping of the old page before unlocking it, so m[un]lock
|
|
can skip these pages by testing the page mapping under page lock.
|
|
|
|
To complete page migration, we place the new and old pages back onto the LRU
|
|
after dropping the page lock. The "unneeded" page - old page on success, new
|
|
page on failure - will be freed when the reference count held by the migration
|
|
process is released. To ensure that we don't strand pages on the unevictable
|
|
list because of a race between munlock and migration, page migration uses the
|
|
putback_lru_page() function to add migrated pages back to the LRU.
|
|
|
|
|
|
COMPACTING MLOCKED PAGES
|
|
------------------------
|
|
|
|
The unevictable LRU can be scanned for compactable regions and the default
|
|
behavior is to do so. /proc/sys/vm/compact_unevictable_allowed controls
|
|
this behavior (see Documentation/sysctl/vm.txt). Once scanning of the
|
|
unevictable LRU is enabled, the work of compaction is mostly handled by
|
|
the page migration code and the same work flow as described in MIGRATING
|
|
MLOCKED PAGES will apply.
|
|
|
|
|
|
mmap(MAP_LOCKED) SYSTEM CALL HANDLING
|
|
-------------------------------------
|
|
|
|
In addition the mlock()/mlockall() system calls, an application can request
|
|
that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
|
|
call. There is one important and subtle difference here, though. mmap() + mlock()
|
|
will fail if the range cannot be faulted in (e.g. because mm_populate fails)
|
|
and returns with ENOMEM while mmap(MAP_LOCKED) will not fail. The mmaped
|
|
area will still have properties of the locked area - aka. pages will not get
|
|
swapped out - but major page faults to fault memory in might still happen.
|
|
|
|
Furthermore, any mmap() call or brk() call that expands the heap by a
|
|
task that has previously called mlockall() with the MCL_FUTURE flag will result
|
|
in the newly mapped memory being mlocked. Before the unevictable/mlock
|
|
changes, the kernel simply called make_pages_present() to allocate pages and
|
|
populate the page table.
|
|
|
|
To mlock a range of memory under the unevictable/mlock infrastructure, the
|
|
mmap() handler and task address space expansion functions call
|
|
populate_vma_page_range() specifying the vma and the address range to mlock.
|
|
|
|
The callers of populate_vma_page_range() will have already added the memory range
|
|
to be mlocked to the task's "locked_vm". To account for filtered VMAs,
|
|
populate_vma_page_range() returns the number of pages NOT mlocked. All of the
|
|
callers then subtract a non-negative return value from the task's locked_vm. A
|
|
negative return value represent an error - for example, from get_user_pages()
|
|
attempting to fault in a VMA with PROT_NONE access. In this case, we leave the
|
|
memory range accounted as locked_vm, as the protections could be changed later
|
|
and pages allocated into that region.
|
|
|
|
|
|
munmap()/exit()/exec() SYSTEM CALL HANDLING
|
|
-------------------------------------------
|
|
|
|
When unmapping an mlocked region of memory, whether by an explicit call to
|
|
munmap() or via an internal unmap from exit() or exec() processing, we must
|
|
munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
|
|
Before the unevictable/mlock changes, mlocking did not mark the pages in any
|
|
way, so unmapping them required no processing.
|
|
|
|
To munlock a range of memory under the unevictable/mlock infrastructure, the
|
|
munmap() handler and task address space call tear down function
|
|
munlock_vma_pages_all(). The name reflects the observation that one always
|
|
specifies the entire VMA range when munlock()ing during unmap of a region.
|
|
Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
|
|
actually contain mlocked pages will be passed to munlock_vma_pages_all().
|
|
|
|
munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
|
|
for the munlock case, calls __munlock_vma_pages_range() to walk the page table
|
|
for the VMA's memory range and munlock_vma_page() each resident page mapped by
|
|
the VMA. This effectively munlocks the page, only if this is the last
|
|
VM_LOCKED VMA that maps the page.
|
|
|
|
|
|
try_to_unmap()
|
|
--------------
|
|
|
|
Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may
|
|
have VM_LOCKED flag set. It is possible for a page mapped into one or more
|
|
VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
|
|
of the active or inactive LRU lists. This could happen if, for example, a task
|
|
in the process of munlocking the page could not isolate the page from the LRU.
|
|
As a result, vmscan/shrink_page_list() might encounter such a page as described
|
|
in section "vmscan's handling of unevictable pages". To handle this situation,
|
|
try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
|
|
map.
|
|
|
|
try_to_unmap() is always called, by either vmscan for reclaim or for page
|
|
migration, with the argument page locked and isolated from the LRU. Separate
|
|
functions handle anonymous and mapped file and KSM pages, as these types of
|
|
pages have different reverse map lookup mechanisms, with different locking.
|
|
In each case, whether rmap_walk_anon() or rmap_walk_file() or rmap_walk_ksm(),
|
|
it will call try_to_unmap_one() for every VMA which might contain the page.
|
|
|
|
When trying to reclaim, if try_to_unmap_one() finds the page in a VM_LOCKED
|
|
VMA, it will then mlock the page via mlock_vma_page() instead of unmapping it,
|
|
and return SWAP_MLOCK to indicate that the page is unevictable: and the scan
|
|
stops there.
|
|
|
|
mlock_vma_page() is called while holding the page table's lock (in addition
|
|
to the page lock, and the rmap lock): to serialize against concurrent mlock or
|
|
munlock or munmap system calls, mm teardown (munlock_vma_pages_all), reclaim,
|
|
holepunching, and truncation of file pages and their anonymous COWed pages.
|
|
|
|
|
|
try_to_munlock() REVERSE MAP SCAN
|
|
---------------------------------
|
|
|
|
[!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
|
|
page_referenced() reverse map walker.
|
|
|
|
When munlock_vma_page() [see section "munlock()/munlockall() System Call
|
|
Handling" above] tries to munlock a page, it needs to determine whether or not
|
|
the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
|
|
all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
|
|
introduced a variant of try_to_unmap() called try_to_munlock().
|
|
|
|
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
|
|
mapped file and KSM pages with a flag argument specifying unlock versus unmap
|
|
processing. Again, these functions walk the respective reverse maps looking
|
|
for VM_LOCKED VMAs. When such a VMA is found, as in the try_to_unmap() case,
|
|
the functions mlock the page via mlock_vma_page() and return SWAP_MLOCK. This
|
|
undoes the pre-clearing of the page's PG_mlocked done by munlock_vma_page.
|
|
|
|
Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
|
|
reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
|
|
However, the scan can terminate when it encounters a VM_LOCKED VMA.
|
|
Although try_to_munlock() might be called a great many times when munlocking a
|
|
large region or tearing down a large address space that has been mlocked via
|
|
mlockall(), overall this is a fairly rare event.
|
|
|
|
|
|
PAGE RECLAIM IN shrink_*_list()
|
|
-------------------------------
|
|
|
|
shrink_active_list() culls any obviously unevictable pages - i.e.
|
|
!page_evictable(page) - diverting these to the unevictable list.
|
|
However, shrink_active_list() only sees unevictable pages that made it onto the
|
|
active/inactive lru lists. Note that these pages do not have PageUnevictable
|
|
set - otherwise they would be on the unevictable list and shrink_active_list
|
|
would never see them.
|
|
|
|
Some examples of these unevictable pages on the LRU lists are:
|
|
|
|
(1) ramfs pages that have been placed on the LRU lists when first allocated.
|
|
|
|
(2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to
|
|
allocate or fault in the pages in the shared memory region. This happens
|
|
when an application accesses the page the first time after SHM_LOCK'ing
|
|
the segment.
|
|
|
|
(3) mlocked pages that could not be isolated from the LRU and moved to the
|
|
unevictable list in mlock_vma_page().
|
|
|
|
shrink_inactive_list() also diverts any unevictable pages that it finds on the
|
|
inactive lists to the appropriate zone's unevictable list.
|
|
|
|
shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
|
|
after shrink_active_list() had moved them to the inactive list, or pages mapped
|
|
into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
|
|
recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter,
|
|
but will pass on to shrink_page_list().
|
|
|
|
shrink_page_list() again culls obviously unevictable pages that it could
|
|
encounter for similar reason to shrink_inactive_list(). Pages mapped into
|
|
VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
|
|
try_to_unmap(). shrink_page_list() will divert them to the unevictable list
|
|
when try_to_unmap() returns SWAP_MLOCK, as discussed above.
|