mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
78656acdcf
this patch adds a new driver for the Silicon Labs Si470x FM Radio Receiver. It should also work for the identical ADS/Tech FM Radio Receiver (formerly Instant FM Music) as soon as I find out the USB Vendor and Product ID. The driver is inspired by several other USB and radio drivers, but mainly from the D-Link DSB-R100 USB radio (dsbr100.c). The USB stick currently has an Si4701 FM RDS radio receiver. But the other Si470x devices are pin and register compatible, so that in the future the driver can easily be patched to support these too. Therefore I named the driver radio-si470x and the configuration option usb-si470x. The driver itself just provides the control function over the radio. For getting audio back, the device support the USB audio class, which is implemented in the already existing driver. I tested the driver in the last days, until it now satisfies all my functionality and robustness requirements. The application I used for testing was kradio. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
365 lines
13 KiB
Plaintext
365 lines
13 KiB
Plaintext
#
|
|
# Multimedia Video device configuration
|
|
#
|
|
|
|
menuconfig RADIO_ADAPTERS
|
|
bool "Radio Adapters"
|
|
depends on VIDEO_DEV
|
|
default y
|
|
---help---
|
|
Say Y here to enable selecting AM/FM radio adapters.
|
|
|
|
if RADIO_ADAPTERS && VIDEO_DEV
|
|
|
|
config RADIO_CADET
|
|
tristate "ADS Cadet AM/FM Tuner"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these AM/FM radio cards, and then
|
|
fill in the port address below.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
Further documentation on this driver can be found on the WWW at
|
|
<http://linux.blackhawke.net/cadet/>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-cadet.
|
|
|
|
config RADIO_RTRACK
|
|
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these FM radio cards, and then fill
|
|
in the port address below.
|
|
|
|
Note that newer AIMSlab RadioTrack cards have a different chipset
|
|
and are not supported by this driver. For these cards, use the
|
|
RadioTrack II driver below.
|
|
|
|
If you have a GemTeks combined (PnP) sound- and radio card you must
|
|
use this driver as a module and setup the card with isapnptools.
|
|
You must also pass the module a suitable io parameter, 0x248 has
|
|
been reported to be used by these cards.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>. More information is
|
|
contained in the file
|
|
<file:Documentation/video4linux/radiotrack.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-aimslab.
|
|
|
|
config RADIO_RTRACK_PORT
|
|
hex "RadioTrack i/o port (0x20f or 0x30f)"
|
|
depends on RADIO_RTRACK=y
|
|
default "20f"
|
|
help
|
|
Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
|
|
haven't changed the jumper setting on the card.
|
|
|
|
config RADIO_RTRACK2
|
|
tristate "AIMSlab RadioTrack II support"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have this FM radio card, and then fill in the
|
|
port address below.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-rtrack2.
|
|
|
|
config RADIO_RTRACK2_PORT
|
|
hex "RadioTrack II i/o port (0x20c or 0x30c)"
|
|
depends on RADIO_RTRACK2=y
|
|
default "30c"
|
|
help
|
|
Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
|
|
haven't changed the jumper setting on the card.
|
|
|
|
config RADIO_AZTECH
|
|
tristate "Aztech/Packard Bell Radio"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these FM radio cards, and then fill
|
|
in the port address below.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-aztech.
|
|
|
|
config RADIO_AZTECH_PORT
|
|
hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
|
|
depends on RADIO_AZTECH=y
|
|
default "350"
|
|
help
|
|
Enter either 0x350 or 0x358 here. The card default is 0x350, if you
|
|
haven't changed the setting of jumper JP3 on the card. Removing the
|
|
jumper sets the card to 0x358.
|
|
|
|
config RADIO_GEMTEK
|
|
tristate "GemTek Radio card (or compatible) support"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have this FM radio card, and then fill in the
|
|
I/O port address and settings below. The following cards either have
|
|
GemTek Radio tuner or are rebranded GemTek Radio cards:
|
|
|
|
- Sound Vision 16 Gold with FM Radio
|
|
- Typhoon Radio card (some models)
|
|
- Hama Radio card
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-gemtek.
|
|
|
|
config RADIO_GEMTEK_PORT
|
|
hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
|
|
depends on RADIO_GEMTEK=y
|
|
default "34c"
|
|
help
|
|
Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
|
|
0x34c, if you haven't changed the jumper setting on the card. On
|
|
Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
|
|
port is 0x20c, 0x248 or 0x28c.
|
|
If automatic I/O port probing is enabled this port will be used only
|
|
in case of automatic probing failure, ie. as a fallback.
|
|
|
|
config RADIO_GEMTEK_PROBE
|
|
bool "Automatic I/O port probing"
|
|
depends on RADIO_GEMTEK=y
|
|
default y
|
|
help
|
|
Say Y here to enable automatic probing for GemTek Radio card. The
|
|
following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
|
|
0x28c.
|
|
|
|
config RADIO_GEMTEK_PCI
|
|
tristate "GemTek PCI Radio Card support"
|
|
depends on VIDEO_V4L2 && PCI
|
|
---help---
|
|
Choose Y here if you have this PCI FM radio card.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video for Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-gemtek-pci.
|
|
|
|
config RADIO_MAXIRADIO
|
|
tristate "Guillemot MAXI Radio FM 2000 radio"
|
|
depends on VIDEO_V4L2 && PCI
|
|
---help---
|
|
Choose Y here if you have this radio card. This card may also be
|
|
found as Gemtek PCI FM.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-maxiradio.
|
|
|
|
config RADIO_MAESTRO
|
|
tristate "Maestro on board radio"
|
|
depends on VIDEO_V4L2 && PCI
|
|
---help---
|
|
Say Y here to directly support the on-board radio tuner on the
|
|
Maestro 2 or 2E sound card.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-maestro.
|
|
|
|
config RADIO_SF16FMI
|
|
tristate "SF16FMI Radio"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these FM radio cards. If you
|
|
compile the driver into the kernel and your card is not PnP one, you
|
|
have to add "sf16fm=<io>" to the kernel command line (I/O address is
|
|
0x284 or 0x384).
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-sf16fmi.
|
|
|
|
config RADIO_SF16FMR2
|
|
tristate "SF16FMR2 Radio"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these FM radio cards.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found on the WWW at
|
|
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-sf16fmr2.
|
|
|
|
config RADIO_TERRATEC
|
|
tristate "TerraTec ActiveRadio ISA Standalone"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have this FM radio card, and then fill in the
|
|
port address below. (TODO)
|
|
|
|
Note: This driver is in its early stages. Right now volume and
|
|
frequency control and muting works at least for me, but
|
|
unfortunately I have not found anybody who wants to use this card
|
|
with Linux. So if it is this what YOU are trying to do right now,
|
|
PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-terratec.
|
|
|
|
config RADIO_TERRATEC_PORT
|
|
hex "Terratec i/o port (normally 0x590)"
|
|
depends on RADIO_TERRATEC=y
|
|
default "590"
|
|
help
|
|
Fill in the I/O port of your TerraTec FM radio card. If unsure, go
|
|
with the default.
|
|
|
|
config RADIO_TRUST
|
|
tristate "Trust FM radio card"
|
|
depends on ISA && VIDEO_V4L2
|
|
help
|
|
This is a driver for the Trust FM radio cards. Say Y if you have
|
|
such a card and want to use it under Linux.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-trust.
|
|
|
|
config RADIO_TRUST_PORT
|
|
hex "Trust i/o port (usually 0x350 or 0x358)"
|
|
depends on RADIO_TRUST=y
|
|
default "350"
|
|
help
|
|
Enter the I/O port of your Trust FM radio card. If unsure, try the
|
|
values "0x350" or "0x358".
|
|
|
|
config RADIO_TYPHOON
|
|
tristate "Typhoon Radio (a.k.a. EcoRadio)"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these FM radio cards, and then fill
|
|
in the port address and the frequency used for muting below.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-typhoon.
|
|
|
|
config RADIO_TYPHOON_PROC_FS
|
|
bool "Support for /proc/radio-typhoon"
|
|
depends on PROC_FS && RADIO_TYPHOON
|
|
help
|
|
Say Y here if you want the typhoon radio card driver to write
|
|
status information (frequency, volume, muted, mute frequency,
|
|
base address) to /proc/radio-typhoon. The file can be viewed with
|
|
your favorite pager (i.e. use "more /proc/radio-typhoon" or "less
|
|
/proc/radio-typhoon" or simply "cat /proc/radio-typhoon").
|
|
|
|
config RADIO_TYPHOON_PORT
|
|
hex "Typhoon I/O port (0x316 or 0x336)"
|
|
depends on RADIO_TYPHOON=y
|
|
default "316"
|
|
help
|
|
Enter the I/O port of your Typhoon or EcoRadio radio card.
|
|
|
|
config RADIO_TYPHOON_MUTEFREQ
|
|
int "Typhoon frequency set when muting the device (kHz)"
|
|
depends on RADIO_TYPHOON=y
|
|
default "87500"
|
|
help
|
|
Enter the frequency used for muting the radio. The device is never
|
|
completely silent. If the volume is just turned down, you can still
|
|
hear silent voices and music. For that reason, the frequency of the
|
|
radio device is set to the frequency you can enter here whenever
|
|
the device is muted. There should be no local radio station at that
|
|
frequency.
|
|
|
|
config RADIO_ZOLTRIX
|
|
tristate "Zoltrix Radio"
|
|
depends on ISA && VIDEO_V4L2
|
|
---help---
|
|
Choose Y here if you have one of these FM radio cards, and then fill
|
|
in the port address below.
|
|
|
|
In order to control your radio card, you will need to use programs
|
|
that are compatible with the Video For Linux API. Information on
|
|
this API and pointers to "v4l" programs may be found at
|
|
<file:Documentation/video4linux/API.html>.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-zoltrix.
|
|
|
|
config RADIO_ZOLTRIX_PORT
|
|
hex "ZOLTRIX I/O port (0x20c or 0x30c)"
|
|
depends on RADIO_ZOLTRIX=y
|
|
default "20c"
|
|
help
|
|
Enter the I/O port of your Zoltrix radio card.
|
|
|
|
config USB_DSBR
|
|
tristate "D-Link/GemTek USB FM radio support"
|
|
depends on USB && VIDEO_V4L2
|
|
---help---
|
|
Say Y here if you want to connect this type of radio to your
|
|
computer's USB port. Note that the audio is not digital, and
|
|
you must connect the line out connector to a sound card or a
|
|
set of speakers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called dsbr100.
|
|
|
|
config USB_SI470X
|
|
tristate "Silicon Labs Si470x FM Radio Receiver support"
|
|
depends on USB && VIDEO_V4L2
|
|
---help---
|
|
Say Y here if you want to connect this type of radio to your
|
|
computer's USB port.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called radio-silabs.
|
|
|
|
endif # RADIO_ADAPTERS
|