mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-16 15:34:48 +08:00
77b981c82c
1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Added needed_headroom and set hard_header_len to 0 When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes. So the value of needed_headroom in this driver should be 3 - 1. Because this driver has no header_ops, according to the logic of af_packet.c, the value of hard_header_len should be 0. Reason of setting needed_headroom and hard_header_len at this place: This driver is written using the API of the hdlc module, the hdlc module enables this driver (the protocol driver) to run on any hardware that has a driver (the hardware driver) written using the API of the hdlc module. Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set things like hard_header_len at this place. In hdlc_ppp, it sets hard_header_len after attach_hdlc_protocol and before setting dev->type. In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after attach_hdlc_protocol and after memcpy the settings. 3. Reset needed_headroom when detaching protocols (in hdlc.c) When detaching a protocol from a hardware device, the hdlc module will reset various parameters of the device (including hard_header_len) to the default values. We add needed_headroom here so that needed_headroom will also be reset. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| appletalk | ||
| arcnet | ||
| bonding | ||
| caif | ||
| can | ||
| dsa | ||
| ethernet | ||
| fddi | ||
| fjes | ||
| hamradio | ||
| hippi | ||
| hyperv | ||
| ieee802154 | ||
| ipa | ||
| ipvlan | ||
| netdevsim | ||
| phy | ||
| plip | ||
| ppp | ||
| slip | ||
| team | ||
| usb | ||
| vmxnet3 | ||
| wan | ||
| wimax | ||
| wireguard | ||
| wireless | ||
| xen-netback | ||
| bareudp.c | ||
| dummy.c | ||
| eql.c | ||
| geneve.c | ||
| gtp.c | ||
| ifb.c | ||
| Kconfig | ||
| LICENSE.SRC | ||
| loopback.c | ||
| macsec.c | ||
| macvlan.c | ||
| macvtap.c | ||
| Makefile | ||
| mdio.c | ||
| mii.c | ||
| net_failover.c | ||
| netconsole.c | ||
| nlmon.c | ||
| ntb_netdev.c | ||
| rionet.c | ||
| sb1000.c | ||
| Space.c | ||
| sungem_phy.c | ||
| tap.c | ||
| thunderbolt.c | ||
| tun.c | ||
| veth.c | ||
| virtio_net.c | ||
| vrf.c | ||
| vsockmon.c | ||
| vxlan.c | ||
| xen-netfront.c | ||