mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-11 21:14:07 +08:00
af30f8eaa8
1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs. 2. Add helper for handling non-lineral port <-> reg mappings. 3. Add support for 12 B LED reg blocks on BCM4908 (different layout) Complete support for LEDs setup will be implemented once Linux receives a proper design & implementation for "hardware" LEDs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
497 lines
15 KiB
C
497 lines
15 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Broadcom Starfighter 2 switch register defines
|
|
*
|
|
* Copyright (C) 2014, Broadcom Corporation
|
|
*/
|
|
#ifndef __BCM_SF2_REGS_H
|
|
#define __BCM_SF2_REGS_H
|
|
|
|
/* Register set relative to 'REG' */
|
|
|
|
enum bcm_sf2_reg_offs {
|
|
REG_SWITCH_CNTRL = 0,
|
|
REG_SWITCH_STATUS,
|
|
REG_DIR_DATA_WRITE,
|
|
REG_DIR_DATA_READ,
|
|
REG_SWITCH_REVISION,
|
|
REG_PHY_REVISION,
|
|
REG_SPHY_CNTRL,
|
|
REG_CROSSBAR,
|
|
REG_RGMII_0_CNTRL,
|
|
REG_RGMII_1_CNTRL,
|
|
REG_RGMII_2_CNTRL,
|
|
REG_RGMII_11_CNTRL,
|
|
REG_LED_0_CNTRL,
|
|
REG_LED_1_CNTRL,
|
|
REG_LED_2_CNTRL,
|
|
REG_LED_3_CNTRL,
|
|
REG_LED_4_CNTRL,
|
|
REG_LED_5_CNTRL,
|
|
REG_LED_AGGREGATE_CTRL,
|
|
REG_SWITCH_REG_MAX,
|
|
};
|
|
|
|
/* Relative to REG_SWITCH_CNTRL */
|
|
#define MDIO_MASTER_SEL (1 << 0)
|
|
|
|
/* Relative to REG_SWITCH_REVISION */
|
|
#define SF2_REV_MASK 0xffff
|
|
#define SWITCH_TOP_REV_SHIFT 16
|
|
#define SWITCH_TOP_REV_MASK 0xffff
|
|
|
|
/* Relative to REG_PHY_REVISION */
|
|
#define PHY_REVISION_MASK 0xffff
|
|
|
|
/* Relative to REG_SPHY_CNTRL */
|
|
#define IDDQ_BIAS (1 << 0)
|
|
#define EXT_PWR_DOWN (1 << 1)
|
|
#define FORCE_DLL_EN (1 << 2)
|
|
#define IDDQ_GLOBAL_PWR (1 << 3)
|
|
#define CK25_DIS (1 << 4)
|
|
#define PHY_RESET (1 << 5)
|
|
#define PHY_PHYAD_SHIFT 8
|
|
#define PHY_PHYAD_MASK 0x1F
|
|
|
|
/* Relative to REG_CROSSBAR */
|
|
#define CROSSBAR_BCM4908_INT_P7 0
|
|
#define CROSSBAR_BCM4908_INT_RUNNER 1
|
|
#define CROSSBAR_BCM4908_EXT_SERDES 0
|
|
#define CROSSBAR_BCM4908_EXT_GPHY4 1
|
|
#define CROSSBAR_BCM4908_EXT_RGMII 2
|
|
|
|
/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */
|
|
#define LED_CNTRL_NO_LINK_ENCODE_SHIFT 0
|
|
#define LED_CNTRL_M10_ENCODE_SHIFT 2
|
|
#define LED_CNTRL_M100_ENCODE_SHIFT 4
|
|
#define LED_CNTRL_M1000_ENCODE_SHIFT 6
|
|
#define LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT 8
|
|
#define LED_CNTRL_SEL_10M_ENCODE_SHIFT 10
|
|
#define LED_CNTRL_SEL_100M_ENCODE_SHIFT 12
|
|
#define LED_CNTRL_SEL_1000M_ENCODE_SHIFT 14
|
|
#define LED_CNTRL_RX_DV_EN (1 << 16)
|
|
#define LED_CNTRL_TX_EN_EN (1 << 17)
|
|
#define LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT 18
|
|
#define LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT 20
|
|
#define LED_CNTRL_ACT_LED_ACT_SEL_SHIFT 22
|
|
#define LED_CNTRL_SPDLNK_SRC_SEL (1 << 24)
|
|
#define LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL (1 << 25)
|
|
#define LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL (1 << 26)
|
|
#define LED_CNTRL_ACT_LED_POL_SEL (1 << 27)
|
|
#define LED_CNTRL_MASK 0x3
|
|
|
|
/* Register relative to REG_LED_*_CNTRL (BCM4908) */
|
|
#define REG_LED_CTRL 0x0
|
|
#define LED_CTRL_RX_ACT_EN 0x00000001
|
|
#define LED_CTRL_TX_ACT_EN 0x00000002
|
|
#define LED_CTRL_SPDLNK_LED0_ACT_SEL 0x00000004
|
|
#define LED_CTRL_SPDLNK_LED1_ACT_SEL 0x00000008
|
|
#define LED_CTRL_SPDLNK_LED2_ACT_SEL 0x00000010
|
|
#define LED_CTRL_ACT_LED_ACT_SEL 0x00000020
|
|
#define LED_CTRL_SPDLNK_LED0_ACT_POL_SEL 0x00000040
|
|
#define LED_CTRL_SPDLNK_LED1_ACT_POL_SEL 0x00000080
|
|
#define LED_CTRL_SPDLNK_LED2_ACT_POL_SEL 0x00000100
|
|
#define LED_CTRL_ACT_LED_POL_SEL 0x00000200
|
|
#define LED_CTRL_LED_SPD_OVRD 0x00001c00
|
|
#define LED_CTRL_LNK_STATUS_OVRD 0x00002000
|
|
#define LED_CTRL_SPD_OVRD_EN 0x00004000
|
|
#define LED_CTRL_LNK_OVRD_EN 0x00008000
|
|
|
|
/* Register relative to REG_LED_*_CNTRL (BCM4908) */
|
|
#define REG_LED_LINK_SPEED_ENC_SEL 0x4
|
|
#define LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT 0
|
|
#define LED_LINK_SPEED_ENC_SEL_10M_SHIFT 3
|
|
#define LED_LINK_SPEED_ENC_SEL_100M_SHIFT 6
|
|
#define LED_LINK_SPEED_ENC_SEL_1000M_SHIFT 9
|
|
#define LED_LINK_SPEED_ENC_SEL_2500M_SHIFT 12
|
|
#define LED_LINK_SPEED_ENC_SEL_10G_SHIFT 15
|
|
#define LED_LINK_SPEED_ENC_SEL_MASK 0x7
|
|
|
|
/* Register relative to REG_LED_*_CNTRL (BCM4908) */
|
|
#define REG_LED_LINK_SPEED_ENC 0x8
|
|
#define LED_LINK_SPEED_ENC_NO_LINK_SHIFT 0
|
|
#define LED_LINK_SPEED_ENC_M10_SHIFT 3
|
|
#define LED_LINK_SPEED_ENC_M100_SHIFT 6
|
|
#define LED_LINK_SPEED_ENC_M1000_SHIFT 9
|
|
#define LED_LINK_SPEED_ENC_M2500_SHIFT 12
|
|
#define LED_LINK_SPEED_ENC_M10G_SHIFT 15
|
|
#define LED_LINK_SPEED_ENC_MASK 0x7
|
|
|
|
/* Relative to REG_RGMII_CNTRL */
|
|
#define RGMII_MODE_EN (1 << 0)
|
|
#define ID_MODE_DIS (1 << 1)
|
|
#define PORT_MODE_SHIFT 2
|
|
#define INT_EPHY (0 << PORT_MODE_SHIFT)
|
|
#define INT_GPHY (1 << PORT_MODE_SHIFT)
|
|
#define EXT_EPHY (2 << PORT_MODE_SHIFT)
|
|
#define EXT_GPHY (3 << PORT_MODE_SHIFT)
|
|
#define EXT_REVMII (4 << PORT_MODE_SHIFT)
|
|
#define PORT_MODE_MASK 0x7
|
|
#define RVMII_REF_SEL (1 << 5)
|
|
#define RX_PAUSE_EN (1 << 6)
|
|
#define TX_PAUSE_EN (1 << 7)
|
|
#define TX_CLK_STOP_EN (1 << 8)
|
|
#define LPI_COUNT_SHIFT 9
|
|
#define LPI_COUNT_MASK 0x3F
|
|
|
|
/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
|
|
#define INTRL2_CPU_STATUS 0x00
|
|
#define INTRL2_CPU_SET 0x04
|
|
#define INTRL2_CPU_CLEAR 0x08
|
|
#define INTRL2_CPU_MASK_STATUS 0x0c
|
|
#define INTRL2_CPU_MASK_SET 0x10
|
|
#define INTRL2_CPU_MASK_CLEAR 0x14
|
|
|
|
/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
|
|
#define P_LINK_UP_IRQ(x) (1 << (0 + (x)))
|
|
#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x)))
|
|
#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x)))
|
|
#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x)))
|
|
#define P_GPHY_IRQ(x) (1 << (4 + (x)))
|
|
#define P_NUM_IRQ 5
|
|
#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \
|
|
P_LINK_DOWN_IRQ((x)) | \
|
|
P_ENERGY_ON_IRQ((x)) | \
|
|
P_ENERGY_OFF_IRQ((x)) | \
|
|
P_GPHY_IRQ((x)))
|
|
|
|
/* INTRL2_0 interrupt sources */
|
|
#define P0_IRQ_OFF 0
|
|
#define MEM_DOUBLE_IRQ (1 << 5)
|
|
#define EEE_LPI_IRQ (1 << 6)
|
|
#define P5_CPU_WAKE_IRQ (1 << 7)
|
|
#define P8_CPU_WAKE_IRQ (1 << 8)
|
|
#define P7_CPU_WAKE_IRQ (1 << 9)
|
|
#define IEEE1588_IRQ (1 << 10)
|
|
#define MDIO_ERR_IRQ (1 << 11)
|
|
#define MDIO_DONE_IRQ (1 << 12)
|
|
#define GISB_ERR_IRQ (1 << 13)
|
|
#define UBUS_ERR_IRQ (1 << 14)
|
|
#define FAILOVER_ON_IRQ (1 << 15)
|
|
#define FAILOVER_OFF_IRQ (1 << 16)
|
|
#define TCAM_SOFT_ERR_IRQ (1 << 17)
|
|
|
|
/* INTRL2_1 interrupt sources */
|
|
#define P7_IRQ_OFF 0
|
|
#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ)
|
|
|
|
/* Register set relative to 'ACB' */
|
|
#define ACB_CONTROL 0x00
|
|
#define ACB_EN (1 << 0)
|
|
#define ACB_ALGORITHM (1 << 1)
|
|
#define ACB_FLUSH_SHIFT 2
|
|
#define ACB_FLUSH_MASK 0x3
|
|
|
|
#define ACB_QUEUE_0_CFG 0x08
|
|
#define XOFF_THRESHOLD_MASK 0x7ff
|
|
#define XON_EN (1 << 11)
|
|
#define TOTAL_XOFF_THRESHOLD_SHIFT 12
|
|
#define TOTAL_XOFF_THRESHOLD_MASK 0x7ff
|
|
#define TOTAL_XOFF_EN (1 << 23)
|
|
#define TOTAL_XON_EN (1 << 24)
|
|
#define PKTLEN_SHIFT 25
|
|
#define PKTLEN_MASK 0x3f
|
|
#define ACB_QUEUE_CFG(x) (ACB_QUEUE_0_CFG + ((x) * 0x4))
|
|
|
|
/* Register set relative to 'CORE' */
|
|
#define CORE_G_PCTL_PORT0 0x00000
|
|
#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4))
|
|
#define CORE_IMP_CTL 0x00020
|
|
#define RX_DIS (1 << 0)
|
|
#define TX_DIS (1 << 1)
|
|
#define RX_BCST_EN (1 << 2)
|
|
#define RX_MCST_EN (1 << 3)
|
|
#define RX_UCST_EN (1 << 4)
|
|
|
|
#define CORE_SWMODE 0x0002c
|
|
#define SW_FWDG_MODE (1 << 0)
|
|
#define SW_FWDG_EN (1 << 1)
|
|
#define RTRY_LMT_DIS (1 << 2)
|
|
|
|
#define CORE_STS_OVERRIDE_IMP 0x00038
|
|
#define GMII_SPEED_UP_2G (1 << 6)
|
|
#define MII_SW_OR (1 << 7)
|
|
|
|
/* Alternate layout for e.g: 7278 */
|
|
#define CORE_STS_OVERRIDE_IMP2 0x39040
|
|
|
|
#define CORE_NEW_CTRL 0x00084
|
|
#define IP_MC (1 << 0)
|
|
#define OUTRANGEERR_DISCARD (1 << 1)
|
|
#define INRANGEERR_DISCARD (1 << 2)
|
|
#define CABLE_DIAG_LEN (1 << 3)
|
|
#define OVERRIDE_AUTO_PD_WAR (1 << 4)
|
|
#define EN_AUTO_PD_WAR (1 << 5)
|
|
#define UC_FWD_EN (1 << 6)
|
|
#define MC_FWD_EN (1 << 7)
|
|
|
|
#define CORE_SWITCH_CTRL 0x00088
|
|
#define MII_DUMB_FWDG_EN (1 << 6)
|
|
|
|
#define CORE_DIS_LEARN 0x000f0
|
|
|
|
#define CORE_SFT_LRN_CTRL 0x000f8
|
|
#define SW_LEARN_CNTL(x) (1 << (x))
|
|
|
|
#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4)
|
|
#define CORE_STS_OVERRIDE_GMIIP2_PORT(x) (0x39000 + (x) * 8)
|
|
#define LINK_STS (1 << 0)
|
|
#define DUPLX_MODE (1 << 1)
|
|
#define SPEED_SHIFT 2
|
|
#define SPEED_MASK 0x3
|
|
#define RXFLOW_CNTL (1 << 4)
|
|
#define TXFLOW_CNTL (1 << 5)
|
|
#define SW_OVERRIDE (1 << 6)
|
|
|
|
#define CORE_WATCHDOG_CTRL 0x001e4
|
|
#define SOFTWARE_RESET (1 << 7)
|
|
#define EN_CHIP_RST (1 << 6)
|
|
#define EN_SW_RESET (1 << 4)
|
|
|
|
#define CORE_FAST_AGE_CTRL 0x00220
|
|
#define EN_FAST_AGE_STATIC (1 << 0)
|
|
#define EN_AGE_DYNAMIC (1 << 1)
|
|
#define EN_AGE_PORT (1 << 2)
|
|
#define EN_AGE_VLAN (1 << 3)
|
|
#define EN_AGE_SPT (1 << 4)
|
|
#define EN_AGE_MCAST (1 << 5)
|
|
#define FAST_AGE_STR_DONE (1 << 7)
|
|
|
|
#define CORE_FAST_AGE_PORT 0x00224
|
|
#define AGE_PORT_MASK 0xf
|
|
|
|
#define CORE_FAST_AGE_VID 0x00228
|
|
#define AGE_VID_MASK 0x3fff
|
|
|
|
#define CORE_LNKSTS 0x00400
|
|
#define LNK_STS_MASK 0x1ff
|
|
|
|
#define CORE_SPDSTS 0x00410
|
|
#define SPDSTS_10 0
|
|
#define SPDSTS_100 1
|
|
#define SPDSTS_1000 2
|
|
#define SPDSTS_SHIFT 2
|
|
#define SPDSTS_MASK 0x3
|
|
|
|
#define CORE_DUPSTS 0x00420
|
|
#define CORE_DUPSTS_MASK 0x1ff
|
|
|
|
#define CORE_PAUSESTS 0x00428
|
|
#define PAUSESTS_TX_PAUSE_SHIFT 9
|
|
|
|
#define CORE_GMNCFGCFG 0x0800
|
|
#define RST_MIB_CNT (1 << 0)
|
|
#define RXBPDU_EN (1 << 1)
|
|
|
|
#define CORE_IMP0_PRT_ID 0x0804
|
|
|
|
#define CORE_RST_MIB_CNT_EN 0x0950
|
|
|
|
#define CORE_ARLA_VTBL_RWCTRL 0x1600
|
|
#define ARLA_VTBL_CMD_WRITE 0
|
|
#define ARLA_VTBL_CMD_READ 1
|
|
#define ARLA_VTBL_CMD_CLEAR 2
|
|
#define ARLA_VTBL_STDN (1 << 7)
|
|
|
|
#define CORE_ARLA_VTBL_ADDR 0x1604
|
|
#define VTBL_ADDR_INDEX_MASK 0xfff
|
|
|
|
#define CORE_ARLA_VTBL_ENTRY 0x160c
|
|
#define FWD_MAP_MASK 0x1ff
|
|
#define UNTAG_MAP_MASK 0x1ff
|
|
#define UNTAG_MAP_SHIFT 9
|
|
#define MSTP_INDEX_MASK 0x7
|
|
#define MSTP_INDEX_SHIFT 18
|
|
#define FWD_MODE (1 << 21)
|
|
|
|
#define CORE_MEM_PSM_VDD_CTRL 0x2380
|
|
#define P_TXQ_PSM_VDD_SHIFT 2
|
|
#define P_TXQ_PSM_VDD_MASK 0x3
|
|
#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \
|
|
((x) * P_TXQ_PSM_VDD_SHIFT))
|
|
|
|
#define CORE_PORT_TC2_QOS_MAP_PORT(x) (0xc1c0 + ((x) * 0x10))
|
|
#define PRT_TO_QID_MASK 0x3
|
|
#define PRT_TO_QID_SHIFT 3
|
|
|
|
#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8))
|
|
#define PORT_VLAN_CTRL_MASK 0x1ff
|
|
|
|
#define CORE_TXQ_THD_PAUSE_QN_PORT_0 0x2c80
|
|
#define TXQ_PAUSE_THD_MASK 0x7ff
|
|
#define CORE_TXQ_THD_PAUSE_QN_PORT(x) (CORE_TXQ_THD_PAUSE_QN_PORT_0 + \
|
|
(x) * 0x8)
|
|
|
|
#define CORE_DEFAULT_1Q_TAG_P(x) (0xd040 + ((x) * 8))
|
|
#define CFI_SHIFT 12
|
|
#define PRI_SHIFT 13
|
|
#define PRI_MASK 0x7
|
|
|
|
#define CORE_JOIN_ALL_VLAN_EN 0xd140
|
|
|
|
#define CORE_CFP_ACC 0x28000
|
|
#define OP_STR_DONE (1 << 0)
|
|
#define OP_SEL_SHIFT 1
|
|
#define OP_SEL_READ (1 << OP_SEL_SHIFT)
|
|
#define OP_SEL_WRITE (2 << OP_SEL_SHIFT)
|
|
#define OP_SEL_SEARCH (4 << OP_SEL_SHIFT)
|
|
#define OP_SEL_MASK (7 << OP_SEL_SHIFT)
|
|
#define CFP_RAM_CLEAR (1 << 4)
|
|
#define RAM_SEL_SHIFT 10
|
|
#define TCAM_SEL (1 << RAM_SEL_SHIFT)
|
|
#define ACT_POL_RAM (2 << RAM_SEL_SHIFT)
|
|
#define RATE_METER_RAM (4 << RAM_SEL_SHIFT)
|
|
#define GREEN_STAT_RAM (8 << RAM_SEL_SHIFT)
|
|
#define YELLOW_STAT_RAM (16 << RAM_SEL_SHIFT)
|
|
#define RED_STAT_RAM (24 << RAM_SEL_SHIFT)
|
|
#define RAM_SEL_MASK (0x1f << RAM_SEL_SHIFT)
|
|
#define TCAM_RESET (1 << 15)
|
|
#define XCESS_ADDR_SHIFT 16
|
|
#define XCESS_ADDR_MASK 0xff
|
|
#define SEARCH_STS (1 << 27)
|
|
#define RD_STS_SHIFT 28
|
|
#define RD_STS_TCAM (1 << RD_STS_SHIFT)
|
|
#define RD_STS_ACT_POL_RAM (2 << RD_STS_SHIFT)
|
|
#define RD_STS_RATE_METER_RAM (4 << RD_STS_SHIFT)
|
|
#define RD_STS_STAT_RAM (8 << RD_STS_SHIFT)
|
|
|
|
#define CORE_CFP_RATE_METER_GLOBAL_CTL 0x28010
|
|
|
|
#define CORE_CFP_DATA_PORT_0 0x28040
|
|
#define CORE_CFP_DATA_PORT(x) (CORE_CFP_DATA_PORT_0 + \
|
|
(x) * 0x10)
|
|
|
|
/* UDF_DATA7 */
|
|
#define L3_FRAMING_SHIFT 24
|
|
#define L3_FRAMING_MASK (0x3 << L3_FRAMING_SHIFT)
|
|
#define IPTOS_SHIFT 16
|
|
#define IPTOS_MASK 0xff
|
|
#define IPPROTO_SHIFT 8
|
|
#define IPPROTO_MASK (0xff << IPPROTO_SHIFT)
|
|
#define IP_FRAG_SHIFT 7
|
|
#define IP_FRAG (1 << IP_FRAG_SHIFT)
|
|
|
|
/* UDF_DATA0 */
|
|
#define SLICE_VALID 3
|
|
#define SLICE_NUM_SHIFT 2
|
|
#define SLICE_NUM(x) ((x) << SLICE_NUM_SHIFT)
|
|
#define SLICE_NUM_MASK 0x3
|
|
|
|
#define CORE_CFP_MASK_PORT_0 0x280c0
|
|
|
|
#define CORE_CFP_MASK_PORT(x) (CORE_CFP_MASK_PORT_0 + \
|
|
(x) * 0x10)
|
|
|
|
#define CORE_ACT_POL_DATA0 0x28140
|
|
#define VLAN_BYP (1 << 0)
|
|
#define EAP_BYP (1 << 1)
|
|
#define STP_BYP (1 << 2)
|
|
#define REASON_CODE_SHIFT 3
|
|
#define REASON_CODE_MASK 0x3f
|
|
#define LOOP_BK_EN (1 << 9)
|
|
#define NEW_TC_SHIFT 10
|
|
#define NEW_TC_MASK 0x7
|
|
#define CHANGE_TC (1 << 13)
|
|
#define DST_MAP_IB_SHIFT 14
|
|
#define DST_MAP_IB_MASK 0x1ff
|
|
#define CHANGE_FWRD_MAP_IB_SHIFT 24
|
|
#define CHANGE_FWRD_MAP_IB_MASK 0x3
|
|
#define CHANGE_FWRD_MAP_IB_NO_DEST (0 << CHANGE_FWRD_MAP_IB_SHIFT)
|
|
#define CHANGE_FWRD_MAP_IB_REM_ARL (1 << CHANGE_FWRD_MAP_IB_SHIFT)
|
|
#define CHANGE_FWRD_MAP_IB_REP_ARL (2 << CHANGE_FWRD_MAP_IB_SHIFT)
|
|
#define CHANGE_FWRD_MAP_IB_ADD_DST (3 << CHANGE_FWRD_MAP_IB_SHIFT)
|
|
#define NEW_DSCP_IB_SHIFT 26
|
|
#define NEW_DSCP_IB_MASK 0x3f
|
|
|
|
#define CORE_ACT_POL_DATA1 0x28150
|
|
#define CHANGE_DSCP_IB (1 << 0)
|
|
#define DST_MAP_OB_SHIFT 1
|
|
#define DST_MAP_OB_MASK 0x3ff
|
|
#define CHANGE_FWRD_MAP_OB_SHIT 11
|
|
#define CHANGE_FWRD_MAP_OB_MASK 0x3
|
|
#define NEW_DSCP_OB_SHIFT 13
|
|
#define NEW_DSCP_OB_MASK 0x3f
|
|
#define CHANGE_DSCP_OB (1 << 19)
|
|
#define CHAIN_ID_SHIFT 20
|
|
#define CHAIN_ID_MASK 0xff
|
|
#define CHANGE_COLOR (1 << 28)
|
|
#define NEW_COLOR_SHIFT 29
|
|
#define NEW_COLOR_MASK 0x3
|
|
#define NEW_COLOR_GREEN (0 << NEW_COLOR_SHIFT)
|
|
#define NEW_COLOR_YELLOW (1 << NEW_COLOR_SHIFT)
|
|
#define NEW_COLOR_RED (2 << NEW_COLOR_SHIFT)
|
|
#define RED_DEFAULT (1 << 31)
|
|
|
|
#define CORE_ACT_POL_DATA2 0x28160
|
|
#define MAC_LIMIT_BYPASS (1 << 0)
|
|
#define CHANGE_TC_O (1 << 1)
|
|
#define NEW_TC_O_SHIFT 2
|
|
#define NEW_TC_O_MASK 0x7
|
|
#define SPCP_RMK_DISABLE (1 << 5)
|
|
#define CPCP_RMK_DISABLE (1 << 6)
|
|
#define DEI_RMK_DISABLE (1 << 7)
|
|
|
|
#define CORE_RATE_METER0 0x28180
|
|
#define COLOR_MODE (1 << 0)
|
|
#define POLICER_ACTION (1 << 1)
|
|
#define COUPLING_FLAG (1 << 2)
|
|
#define POLICER_MODE_SHIFT 3
|
|
#define POLICER_MODE_MASK 0x3
|
|
#define POLICER_MODE_RFC2698 (0 << POLICER_MODE_SHIFT)
|
|
#define POLICER_MODE_RFC4115 (1 << POLICER_MODE_SHIFT)
|
|
#define POLICER_MODE_MEF (2 << POLICER_MODE_SHIFT)
|
|
#define POLICER_MODE_DISABLE (3 << POLICER_MODE_SHIFT)
|
|
|
|
#define CORE_RATE_METER1 0x28190
|
|
#define EIR_TK_BKT_MASK 0x7fffff
|
|
|
|
#define CORE_RATE_METER2 0x281a0
|
|
#define EIR_BKT_SIZE_MASK 0xfffff
|
|
|
|
#define CORE_RATE_METER3 0x281b0
|
|
#define EIR_REF_CNT_MASK 0x7ffff
|
|
|
|
#define CORE_RATE_METER4 0x281c0
|
|
#define CIR_TK_BKT_MASK 0x7fffff
|
|
|
|
#define CORE_RATE_METER5 0x281d0
|
|
#define CIR_BKT_SIZE_MASK 0xfffff
|
|
|
|
#define CORE_RATE_METER6 0x281e0
|
|
#define CIR_REF_CNT_MASK 0x7ffff
|
|
|
|
#define CORE_STAT_GREEN_CNTR 0x28200
|
|
#define CORE_STAT_YELLOW_CNTR 0x28210
|
|
#define CORE_STAT_RED_CNTR 0x28220
|
|
|
|
#define CORE_CFP_CTL_REG 0x28400
|
|
#define CFP_EN_MAP_MASK 0x1ff
|
|
|
|
/* IPv4 slices, 3 of them */
|
|
#define CORE_UDF_0_A_0_8_PORT_0 0x28440
|
|
#define CFG_UDF_OFFSET_MASK 0x1f
|
|
#define CFG_UDF_OFFSET_BASE_SHIFT 5
|
|
#define CFG_UDF_SOF (0 << CFG_UDF_OFFSET_BASE_SHIFT)
|
|
#define CFG_UDF_EOL2 (2 << CFG_UDF_OFFSET_BASE_SHIFT)
|
|
#define CFG_UDF_EOL3 (3 << CFG_UDF_OFFSET_BASE_SHIFT)
|
|
|
|
/* IPv6 slices */
|
|
#define CORE_UDF_0_B_0_8_PORT_0 0x28500
|
|
|
|
/* IPv6 chained slices */
|
|
#define CORE_UDF_0_D_0_11_PORT_0 0x28680
|
|
|
|
/* Number of slices for IPv4, IPv6 and non-IP */
|
|
#define UDF_NUM_SLICES 4
|
|
#define UDFS_PER_SLICE 9
|
|
|
|
/* Spacing between different slices */
|
|
#define UDF_SLICE_OFFSET 0x40
|
|
|
|
#define CFP_NUM_RULES 256
|
|
|
|
/* Number of egress queues per port */
|
|
#define SF2_NUM_EGRESS_QUEUES 8
|
|
|
|
#endif /* __BCM_SF2_REGS_H */
|