mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 00:34:20 +08:00
76bfc7ccc2
In mmc_send_op_cond(), loops are continuously performed at the same interval of 10 ms. However the behaviour is not good for some eMMC which can be out from a busy state earlier than 10 ms if normal. Rather than fixing about the interval time in mmc_send_op_cond(), let's instead convert into using the common __mmc_poll_for_busy(). The reason for adjusting the interval time is that it is important to reduce the eMMC initialization time, especially in devices that use eMMC as rootfs. Test log(eMMC:KLM8G1GETF-B041): before: 12 ms (0.311016 - 0.298729) [ 0.295823] mmc0: starting CMD0 arg 00000000 flags 000000c0 [ 0.298729] mmc0: starting CMD1 arg 40000080 flags 000000e1<-start [ 0.311016] mmc0: starting CMD1 arg 40000080 flags 000000e1<-finish [ 0.311336] mmc0: starting CMD2 arg 00000000 flags 00000007 after: 2 ms (0.301270 - 0.298762) [ 0.295862] mmc0: starting CMD0 arg 00000000 flags 000000c0 [ 0.298762] mmc0: starting CMD1 arg 40000080 flags 000000e1<-start [ 0.299067] mmc0: starting CMD1 arg 40000080 flags 000000e1 [ 0.299441] mmc0: starting CMD1 arg 40000080 flags 000000e1 [ 0.299879] mmc0: starting CMD1 arg 40000080 flags 000000e1 [ 0.300446] mmc0: starting CMD1 arg 40000080 flags 000000e1 [ 0.301270] mmc0: starting CMD1 arg 40000080 flags 000000e1<-finish [ 0.301572] mmc0: starting CMD2 arg 00000000 flags 00000007 Signed-off-by: Huijin Park <huijin.park@samsung.com> Link: https://lore.kernel.org/r/20211104063231.2115-3-huijin.park@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|---|---|---|
| .. | ||
| core | ||
| host | ||
| Kconfig | ||
| Makefile | ||