linux/include/asm-powerpc/floppy.h
Thomas Gleixner 6714465e83 [PATCH] irq-flags: POWERPC: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:47 -07:00

107 lines
2.8 KiB
C

/*
* Architecture specific parts of the Floppy driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995
*/
#ifndef __ASM_POWERPC_FLOPPY_H
#define __ASM_POWERPC_FLOPPY_H
#ifdef __KERNEL__
#include <asm/machdep.h>
#define fd_inb(port) inb_p(port)
#define fd_outb(value,port) outb_p(value,port)
#define fd_enable_dma() enable_dma(FLOPPY_DMA)
#define fd_disable_dma() disable_dma(FLOPPY_DMA)
#define fd_request_dma() request_dma(FLOPPY_DMA, "floppy")
#define fd_free_dma() free_dma(FLOPPY_DMA)
#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA)
#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode)
#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt, \
IRQF_DISABLED, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
#ifdef CONFIG_PCI
#include <linux/pci.h>
#include <asm/ppc-pci.h> /* for ppc64_isabridge_dev */
#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io)
static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size,
int mode, int io)
{
static unsigned long prev_size;
static dma_addr_t bus_addr = 0;
static char *prev_addr;
static int prev_dir;
int dir;
dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
if (bus_addr
&& (addr != prev_addr || size != prev_size || dir != prev_dir)) {
/* different from last time -- unmap prev */
pci_unmap_single(ppc64_isabridge_dev, bus_addr, prev_size, prev_dir);
bus_addr = 0;
}
if (!bus_addr) /* need to map it */
bus_addr = pci_map_single(ppc64_isabridge_dev, addr, size, dir);
/* remember this one as prev */
prev_addr = addr;
prev_size = size;
prev_dir = dir;
fd_clear_dma_ff();
fd_cacheflush(addr, size);
fd_set_dma_mode(mode);
set_dma_addr(FLOPPY_DMA, bus_addr);
fd_set_dma_count(size);
virtual_dma_port = io;
fd_enable_dma();
return 0;
}
#endif /* CONFIG_PCI */
__inline__ void virtual_dma_init(void)
{
/* Nothing to do on PowerPC */
}
static int FDC1 = 0x3f0;
static int FDC2 = -1;
/*
* Again, the CMOS information not available
*/
#define FLOPPY0_TYPE 6
#define FLOPPY1_TYPE 0
#define N_FDC 2 /* Don't change this! */
#define N_DRIVE 8
#define FLOPPY_MOTOR_MASK 0xf0
/*
* The PowerPC has no problems with floppy DMA crossing 64k borders.
*/
#define CROSS_64KB(a,s) (0)
#define EXTRA_FLOPPY_PARAMS
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FLOPPY_H */