linux/drivers/net/wireless/iwlwifi/iwl-ucode.c
Johannes Berg 11483b5c22 iwlwifi: move eeprom into priv
The whole code around eeprom is distributed
across whole bunch of different files, most
of which belong to the to-be-DVM code. As a
result, it is currently very hard to split
out the EEPROM code to be generic. However,
it is also quite unlikely that the current
EEPROM code will be needed by the MVM code
as that has different mechanisms to query
the EEPROM (it does so through the uCode.)

So, at least temporarily, move everything
into priv. If it becomes necessary to use
the code from MVM, we will have to split it
out, but then it's also easier since we'll
know what pieces we need.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12 15:06:09 -04:00

534 lines
14 KiB
C

/******************************************************************************
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/init.h>
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-fh.h"
#include "iwl-op-mode.h"
/******************************************************************************
*
* uCode download functions
*
******************************************************************************/
static inline const struct fw_img *
iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type)
{
if (ucode_type >= IWL_UCODE_TYPE_MAX)
return NULL;
return &priv->fw->img[ucode_type];
}
/*
* Calibration
*/
static int iwl_set_Xtal_calib(struct iwl_priv *priv)
{
struct iwl_calib_xtal_freq_cmd cmd;
__le16 *xtal_calib =
(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_XTAL);
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
}
static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
{
struct iwl_calib_temperature_offset_cmd cmd;
__le16 *offset_calib =
(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
if (!(cmd.radio_sensor_offset))
cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n",
le16_to_cpu(cmd.radio_sensor_offset));
return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
}
static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
{
struct iwl_calib_temperature_offset_v2_cmd cmd;
__le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(priv,
EEPROM_KELVIN_TEMPERATURE);
__le16 *offset_calib_low =
(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
struct iwl_eeprom_calib_hdr *hdr;
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
EEPROM_CALIB_ALL);
memcpy(&cmd.radio_sensor_offset_high, offset_calib_high,
sizeof(*offset_calib_high));
memcpy(&cmd.radio_sensor_offset_low, offset_calib_low,
sizeof(*offset_calib_low));
if (!(cmd.radio_sensor_offset_low)) {
IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
}
memcpy(&cmd.burntVoltageRef, &hdr->voltage,
sizeof(hdr->voltage));
IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_high));
IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_low));
IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n",
le16_to_cpu(cmd.burntVoltageRef));
return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
}
static int iwl_send_calib_cfg(struct iwl_priv *priv)
{
struct iwl_calib_cfg_cmd calib_cfg_cmd;
struct iwl_host_cmd cmd = {
.id = CALIBRATION_CFG_CMD,
.len = { sizeof(struct iwl_calib_cfg_cmd), },
.data = { &calib_cfg_cmd, },
};
memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.flags =
IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK;
return iwl_dvm_send_cmd(priv, &cmd);
}
int iwl_init_alive_start(struct iwl_priv *priv)
{
int ret;
if (cfg(priv)->bt_params &&
cfg(priv)->bt_params->advanced_bt_coexist) {
/*
* Tell uCode we are ready to perform calibration
* need to perform this before any calibration
* no need to close the envlope since we are going
* to load the runtime uCode later.
*/
ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
if (ret)
return ret;
}
ret = iwl_send_calib_cfg(priv);
if (ret)
return ret;
/**
* temperature offset calibration is only needed for runtime ucode,
* so prepare the value now.
*/
if (cfg(priv)->need_temp_offset_calib) {
if (cfg(priv)->temp_offset_v2)
return iwl_set_temperature_offset_calib_v2(priv);
else
return iwl_set_temperature_offset_calib(priv);
}
return 0;
}
static int iwl_send_wimax_coex(struct iwl_priv *priv)
{
struct iwl_wimax_coex_cmd coex_cmd;
/* coexistence is disabled */
memset(&coex_cmd, 0, sizeof(coex_cmd));
return iwl_dvm_send_cmd_pdu(priv,
COEX_PRIORITY_TABLE_CMD, CMD_SYNC,
sizeof(coex_cmd), &coex_cmd);
}
static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
0, 0, 0, 0, 0, 0, 0
};
void iwl_send_prio_tbl(struct iwl_priv *priv)
{
struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd;
memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl,
sizeof(iwl_bt_prio_tbl));
if (iwl_dvm_send_cmd_pdu(priv,
REPLY_BT_COEX_PRIO_TABLE, CMD_SYNC,
sizeof(prio_tbl_cmd), &prio_tbl_cmd))
IWL_ERR(priv, "failed to send BT prio tbl command\n");
}
int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
{
struct iwl_bt_coex_prot_env_cmd env_cmd;
int ret;
env_cmd.action = action;
env_cmd.type = type;
ret = iwl_dvm_send_cmd_pdu(priv,
REPLY_BT_COEX_PROT_ENV, CMD_SYNC,
sizeof(env_cmd), &env_cmd);
if (ret)
IWL_ERR(priv, "failed to send BT env command\n");
return ret;
}
static int iwl_alive_notify(struct iwl_priv *priv)
{
int ret;
iwl_trans_fw_alive(trans(priv));
priv->passive_no_rx = false;
priv->transport_queue_stop = 0;
ret = iwl_send_wimax_coex(priv);
if (ret)
return ret;
if (!cfg(priv)->no_xtal_calib) {
ret = iwl_set_Xtal_calib(priv);
if (ret)
return ret;
}
return iwl_send_calib_results(priv);
}
/**
* iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
* using sample data 100 bytes apart. If these sample points are good,
* it's a pretty good bet that everything between them is good, too.
*/
static int iwl_verify_sec_sparse(struct iwl_priv *priv,
const struct fw_desc *fw_desc)
{
__le32 *image = (__le32 *)fw_desc->v_addr;
u32 len = fw_desc->len;
u32 val;
u32 i;
IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
iwl_write_direct32(trans(priv), HBUS_TARG_MEM_RADDR,
i + fw_desc->offset);
val = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image))
return -EIO;
}
return 0;
}
static void iwl_print_mismatch_sec(struct iwl_priv *priv,
const struct fw_desc *fw_desc)
{
__le32 *image = (__le32 *)fw_desc->v_addr;
u32 len = fw_desc->len;
u32 val;
u32 offs;
int errors = 0;
IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
iwl_write_direct32(trans(priv), HBUS_TARG_MEM_RADDR,
fw_desc->offset);
for (offs = 0;
offs < len && errors < 20;
offs += sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
val = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IWL_ERR(priv, "uCode INST section at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",
offs, val, le32_to_cpu(*image));
errors++;
}
}
}
/**
* iwl_verify_ucode - determine which instruction image is in SRAM,
* and verify its contents
*/
static int iwl_verify_ucode(struct iwl_priv *priv,
enum iwl_ucode_type ucode_type)
{
const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type);
if (!img) {
IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type);
return -EINVAL;
}
if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) {
IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n");
return 0;
}
IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n");
iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]);
return -EIO;
}
struct iwl_alive_data {
bool valid;
u8 subtype;
};
static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
struct iwl_rx_packet *pkt, void *data)
{
struct iwl_priv *priv =
container_of(notif_wait, struct iwl_priv, notif_wait);
struct iwl_alive_data *alive_data = data;
struct iwl_alive_resp *palive;
palive = (void *)pkt->data;
IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision "
"0x%01X 0x%01X\n",
palive->is_valid, palive->ver_type,
palive->ver_subtype);
priv->device_pointers.error_event_table =
le32_to_cpu(palive->error_event_table_ptr);
priv->device_pointers.log_event_table =
le32_to_cpu(palive->log_event_table_ptr);
alive_data->subtype = palive->ver_subtype;
alive_data->valid = palive->is_valid == UCODE_VALID_OK;
return true;
}
#define UCODE_ALIVE_TIMEOUT HZ
#define UCODE_CALIB_TIMEOUT (2*HZ)
int iwl_load_ucode_wait_alive(struct iwl_priv *priv,
enum iwl_ucode_type ucode_type)
{
struct iwl_notification_wait alive_wait;
struct iwl_alive_data alive_data;
const struct fw_img *fw;
int ret;
enum iwl_ucode_type old_type;
static const u8 alive_cmd[] = { REPLY_ALIVE };
old_type = priv->cur_ucode;
priv->cur_ucode = ucode_type;
fw = iwl_get_ucode_image(priv, ucode_type);
priv->ucode_loaded = false;
if (!fw)
return -EINVAL;
iwl_init_notification_wait(&priv->notif_wait, &alive_wait,
alive_cmd, ARRAY_SIZE(alive_cmd),
iwl_alive_fn, &alive_data);
ret = iwl_trans_start_fw(trans(priv), fw);
if (ret) {
priv->cur_ucode = old_type;
iwl_remove_notification(&priv->notif_wait, &alive_wait);
return ret;
}
/*
* Some things may run in the background now, but we
* just wait for the ALIVE notification here.
*/
ret = iwl_wait_notification(&priv->notif_wait, &alive_wait,
UCODE_ALIVE_TIMEOUT);
if (ret) {
priv->cur_ucode = old_type;
return ret;
}
if (!alive_data.valid) {
IWL_ERR(priv, "Loaded ucode is not valid!\n");
priv->cur_ucode = old_type;
return -EIO;
}
/*
* This step takes a long time (60-80ms!!) and
* WoWLAN image should be loaded quickly, so
* skip it for WoWLAN.
*/
if (ucode_type != IWL_UCODE_WOWLAN) {
ret = iwl_verify_ucode(priv, ucode_type);
if (ret) {
priv->cur_ucode = old_type;
return ret;
}
/* delay a bit to give rfkill time to run */
msleep(5);
}
ret = iwl_alive_notify(priv);
if (ret) {
IWL_WARN(priv,
"Could not complete ALIVE transition: %d\n", ret);
priv->cur_ucode = old_type;
return ret;
}
priv->ucode_loaded = true;
return 0;
}
static bool iwlagn_wait_calib(struct iwl_notif_wait_data *notif_wait,
struct iwl_rx_packet *pkt, void *data)
{
struct iwl_priv *priv = data;
struct iwl_calib_hdr *hdr;
int len;
if (pkt->hdr.cmd != CALIBRATION_RES_NOTIFICATION) {
WARN_ON(pkt->hdr.cmd != CALIBRATION_COMPLETE_NOTIFICATION);
return true;
}
hdr = (struct iwl_calib_hdr *)pkt->data;
len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
/* reduce the size by the length field itself */
len -= sizeof(__le32);
if (iwl_calib_set(priv, hdr, len))
IWL_ERR(priv, "Failed to record calibration data %d\n",
hdr->op_code);
return false;
}
int iwl_run_init_ucode(struct iwl_priv *priv)
{
struct iwl_notification_wait calib_wait;
static const u8 calib_complete[] = {
CALIBRATION_RES_NOTIFICATION,
CALIBRATION_COMPLETE_NOTIFICATION
};
int ret;
lockdep_assert_held(&priv->mutex);
/* No init ucode required? Curious, but maybe ok */
if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len)
return 0;
if (priv->init_ucode_run)
return 0;
iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
calib_complete, ARRAY_SIZE(calib_complete),
iwlagn_wait_calib, priv);
/* Will also start the device */
ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
if (ret)
goto error;
ret = iwl_init_alive_start(priv);
if (ret)
goto error;
/*
* Some things may run in the background now, but we
* just wait for the calibration complete notification.
*/
ret = iwl_wait_notification(&priv->notif_wait, &calib_wait,
UCODE_CALIB_TIMEOUT);
if (!ret)
priv->init_ucode_run = true;
goto out;
error:
iwl_remove_notification(&priv->notif_wait, &calib_wait);
out:
/* Whatever happened, stop the device */
iwl_trans_stop_device(trans(priv));
priv->ucode_loaded = false;
return ret;
}