mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 13:05:03 +08:00
1df8552abf
Smart Array controllers newer than the P600 do not honor the PCI power state method of resetting the controllers. Instead, in these cases we can get them to reset via the "doorbell" register. This escaped notice until we began using "performant" mode because the fact that the controllers did not reset did not normally impede subsequent operation, and so things generally appeared to "work". Once the performant mode code was added, if the controller does not reset, it remains in performant mode. The code immediately after the reset presumes the controller is in "simple" mode (which previously, it had remained in simple mode the whole time). If the controller remains in performant mode any code which presumes it is in simple mode will not work. So the reset needs to be fixed. Unfortunately there are some controllers which cannot be reset by either method. (eg. p800). We detect these cases by noticing that the controller seems to remain in performant mode even after a reset has been attempted. In those case, we proceed anyway, as if the reset has happened (and skip the step of waiting for the controller to become ready -- which is expecting it to be in "simple" mode.) To sum up, we try to do a better job of resetting the controller if "reset_devices" is set, and if it doesn't work, we print a message and try to continue anyway. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
368 lines
9.3 KiB
C
368 lines
9.3 KiB
C
/*
|
|
* Disk Array driver for HP Smart Array SAS controllers
|
|
* Copyright 2000, 2009 Hewlett-Packard Development Company, L.P.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
|
|
*
|
|
*/
|
|
#ifndef HPSA_CMD_H
|
|
#define HPSA_CMD_H
|
|
|
|
/* general boundary defintions */
|
|
#define SENSEINFOBYTES 32 /* may vary between hbas */
|
|
#define MAXSGENTRIES 32
|
|
#define HPSA_SG_CHAIN 0x80000000
|
|
#define MAXREPLYQS 256
|
|
|
|
/* Command Status value */
|
|
#define CMD_SUCCESS 0x0000
|
|
#define CMD_TARGET_STATUS 0x0001
|
|
#define CMD_DATA_UNDERRUN 0x0002
|
|
#define CMD_DATA_OVERRUN 0x0003
|
|
#define CMD_INVALID 0x0004
|
|
#define CMD_PROTOCOL_ERR 0x0005
|
|
#define CMD_HARDWARE_ERR 0x0006
|
|
#define CMD_CONNECTION_LOST 0x0007
|
|
#define CMD_ABORTED 0x0008
|
|
#define CMD_ABORT_FAILED 0x0009
|
|
#define CMD_UNSOLICITED_ABORT 0x000A
|
|
#define CMD_TIMEOUT 0x000B
|
|
#define CMD_UNABORTABLE 0x000C
|
|
|
|
/* Unit Attentions ASC's as defined for the MSA2012sa */
|
|
#define POWER_OR_RESET 0x29
|
|
#define STATE_CHANGED 0x2a
|
|
#define UNIT_ATTENTION_CLEARED 0x2f
|
|
#define LUN_FAILED 0x3e
|
|
#define REPORT_LUNS_CHANGED 0x3f
|
|
|
|
/* Unit Attentions ASCQ's as defined for the MSA2012sa */
|
|
|
|
/* These ASCQ's defined for ASC = POWER_OR_RESET */
|
|
#define POWER_ON_RESET 0x00
|
|
#define POWER_ON_REBOOT 0x01
|
|
#define SCSI_BUS_RESET 0x02
|
|
#define MSA_TARGET_RESET 0x03
|
|
#define CONTROLLER_FAILOVER 0x04
|
|
#define TRANSCEIVER_SE 0x05
|
|
#define TRANSCEIVER_LVD 0x06
|
|
|
|
/* These ASCQ's defined for ASC = STATE_CHANGED */
|
|
#define RESERVATION_PREEMPTED 0x03
|
|
#define ASYM_ACCESS_CHANGED 0x06
|
|
#define LUN_CAPACITY_CHANGED 0x09
|
|
|
|
/* transfer direction */
|
|
#define XFER_NONE 0x00
|
|
#define XFER_WRITE 0x01
|
|
#define XFER_READ 0x02
|
|
#define XFER_RSVD 0x03
|
|
|
|
/* task attribute */
|
|
#define ATTR_UNTAGGED 0x00
|
|
#define ATTR_SIMPLE 0x04
|
|
#define ATTR_HEADOFQUEUE 0x05
|
|
#define ATTR_ORDERED 0x06
|
|
#define ATTR_ACA 0x07
|
|
|
|
/* cdb type */
|
|
#define TYPE_CMD 0x00
|
|
#define TYPE_MSG 0x01
|
|
|
|
/* config space register offsets */
|
|
#define CFG_VENDORID 0x00
|
|
#define CFG_DEVICEID 0x02
|
|
#define CFG_I2OBAR 0x10
|
|
#define CFG_MEM1BAR 0x14
|
|
|
|
/* i2o space register offsets */
|
|
#define I2O_IBDB_SET 0x20
|
|
#define I2O_IBDB_CLEAR 0x70
|
|
#define I2O_INT_STATUS 0x30
|
|
#define I2O_INT_MASK 0x34
|
|
#define I2O_IBPOST_Q 0x40
|
|
#define I2O_OBPOST_Q 0x44
|
|
#define I2O_DMA1_CFG 0x214
|
|
|
|
/* Configuration Table */
|
|
#define CFGTBL_ChangeReq 0x00000001l
|
|
#define CFGTBL_AccCmds 0x00000001l
|
|
#define DOORBELL_CTLR_RESET 0x00000004l
|
|
|
|
#define CFGTBL_Trans_Simple 0x00000002l
|
|
#define CFGTBL_Trans_Performant 0x00000004l
|
|
|
|
#define CFGTBL_BusType_Ultra2 0x00000001l
|
|
#define CFGTBL_BusType_Ultra3 0x00000002l
|
|
#define CFGTBL_BusType_Fibre1G 0x00000100l
|
|
#define CFGTBL_BusType_Fibre2G 0x00000200l
|
|
struct vals32 {
|
|
u32 lower;
|
|
u32 upper;
|
|
};
|
|
|
|
union u64bit {
|
|
struct vals32 val32;
|
|
u64 val;
|
|
};
|
|
|
|
/* FIXME this is a per controller value (barf!) */
|
|
#define HPSA_MAX_TARGETS_PER_CTLR 16
|
|
#define HPSA_MAX_LUN 256
|
|
#define HPSA_MAX_PHYS_LUN 1024
|
|
|
|
/* SCSI-3 Commands */
|
|
#pragma pack(1)
|
|
|
|
#define HPSA_INQUIRY 0x12
|
|
struct InquiryData {
|
|
u8 data_byte[36];
|
|
};
|
|
|
|
#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
|
|
#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
|
|
struct ReportLUNdata {
|
|
u8 LUNListLength[4];
|
|
u32 reserved;
|
|
u8 LUN[HPSA_MAX_LUN][8];
|
|
};
|
|
|
|
struct ReportExtendedLUNdata {
|
|
u8 LUNListLength[4];
|
|
u8 extended_response_flag;
|
|
u8 reserved[3];
|
|
u8 LUN[HPSA_MAX_LUN][24];
|
|
};
|
|
|
|
struct SenseSubsystem_info {
|
|
u8 reserved[36];
|
|
u8 portname[8];
|
|
u8 reserved1[1108];
|
|
};
|
|
|
|
/* BMIC commands */
|
|
#define BMIC_READ 0x26
|
|
#define BMIC_WRITE 0x27
|
|
#define BMIC_CACHE_FLUSH 0xc2
|
|
#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */
|
|
|
|
/* Command List Structure */
|
|
union SCSI3Addr {
|
|
struct {
|
|
u8 Dev;
|
|
u8 Bus:6;
|
|
u8 Mode:2; /* b00 */
|
|
} PeripDev;
|
|
struct {
|
|
u8 DevLSB;
|
|
u8 DevMSB:6;
|
|
u8 Mode:2; /* b01 */
|
|
} LogDev;
|
|
struct {
|
|
u8 Dev:5;
|
|
u8 Bus:3;
|
|
u8 Targ:6;
|
|
u8 Mode:2; /* b10 */
|
|
} LogUnit;
|
|
};
|
|
|
|
struct PhysDevAddr {
|
|
u32 TargetId:24;
|
|
u32 Bus:6;
|
|
u32 Mode:2;
|
|
/* 2 level target device addr */
|
|
union SCSI3Addr Target[2];
|
|
};
|
|
|
|
struct LogDevAddr {
|
|
u32 VolId:30;
|
|
u32 Mode:2;
|
|
u8 reserved[4];
|
|
};
|
|
|
|
union LUNAddr {
|
|
u8 LunAddrBytes[8];
|
|
union SCSI3Addr SCSI3Lun[4];
|
|
struct PhysDevAddr PhysDev;
|
|
struct LogDevAddr LogDev;
|
|
};
|
|
|
|
struct CommandListHeader {
|
|
u8 ReplyQueue;
|
|
u8 SGList;
|
|
u16 SGTotal;
|
|
struct vals32 Tag;
|
|
union LUNAddr LUN;
|
|
};
|
|
|
|
struct RequestBlock {
|
|
u8 CDBLen;
|
|
struct {
|
|
u8 Type:3;
|
|
u8 Attribute:3;
|
|
u8 Direction:2;
|
|
} Type;
|
|
u16 Timeout;
|
|
u8 CDB[16];
|
|
};
|
|
|
|
struct ErrDescriptor {
|
|
struct vals32 Addr;
|
|
u32 Len;
|
|
};
|
|
|
|
struct SGDescriptor {
|
|
struct vals32 Addr;
|
|
u32 Len;
|
|
u32 Ext;
|
|
};
|
|
|
|
union MoreErrInfo {
|
|
struct {
|
|
u8 Reserved[3];
|
|
u8 Type;
|
|
u32 ErrorInfo;
|
|
} Common_Info;
|
|
struct {
|
|
u8 Reserved[2];
|
|
u8 offense_size; /* size of offending entry */
|
|
u8 offense_num; /* byte # of offense 0-base */
|
|
u32 offense_value;
|
|
} Invalid_Cmd;
|
|
};
|
|
struct ErrorInfo {
|
|
u8 ScsiStatus;
|
|
u8 SenseLen;
|
|
u16 CommandStatus;
|
|
u32 ResidualCnt;
|
|
union MoreErrInfo MoreErrInfo;
|
|
u8 SenseInfo[SENSEINFOBYTES];
|
|
};
|
|
/* Command types */
|
|
#define CMD_IOCTL_PEND 0x01
|
|
#define CMD_SCSI 0x03
|
|
|
|
/* This structure needs to be divisible by 32 for new
|
|
* indexing method and performant mode.
|
|
*/
|
|
#define PAD32 32
|
|
#define PAD64DIFF 0
|
|
#define USEEXTRA ((sizeof(void *) - 4)/4)
|
|
#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA)
|
|
|
|
#define DIRECT_LOOKUP_SHIFT 5
|
|
#define DIRECT_LOOKUP_BIT 0x10
|
|
|
|
#define HPSA_ERROR_BIT 0x02
|
|
struct ctlr_info; /* defined in hpsa.h */
|
|
/* The size of this structure needs to be divisible by 32
|
|
* on all architectures because low 5 bits of the addresses
|
|
* are used as follows:
|
|
*
|
|
* bit 0: to device, used to indicate "performant mode" command
|
|
* from device, indidcates error status.
|
|
* bit 1-3: to device, indicates block fetch table entry for
|
|
* reducing DMA in fetching commands from host memory.
|
|
* bit 4: used to indicate whether tag is "direct lookup" (index),
|
|
* or a bus address.
|
|
*/
|
|
|
|
struct CommandList {
|
|
struct CommandListHeader Header;
|
|
struct RequestBlock Request;
|
|
struct ErrDescriptor ErrDesc;
|
|
struct SGDescriptor SG[MAXSGENTRIES];
|
|
/* information associated with the command */
|
|
u32 busaddr; /* physical addr of this record */
|
|
struct ErrorInfo *err_info; /* pointer to the allocated mem */
|
|
struct ctlr_info *h;
|
|
int cmd_type;
|
|
long cmdindex;
|
|
struct hlist_node list;
|
|
struct request *rq;
|
|
struct completion *waiting;
|
|
void *scsi_cmd;
|
|
|
|
/* on 64 bit architectures, to get this to be 32-byte-aligned
|
|
* it so happens we need PAD_64 bytes of padding, on 32 bit systems,
|
|
* we need PAD_32 bytes of padding (see below). This does that.
|
|
* If it happens that 64 bit and 32 bit systems need different
|
|
* padding, PAD_32 and PAD_64 can be set independently, and.
|
|
* the code below will do the right thing.
|
|
*/
|
|
#define IS_32_BIT ((8 - sizeof(long))/4)
|
|
#define IS_64_BIT (!IS_32_BIT)
|
|
#define PAD_32 (4)
|
|
#define PAD_64 (4)
|
|
#define COMMANDLIST_PAD (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
|
|
u8 pad[COMMANDLIST_PAD];
|
|
};
|
|
|
|
/* Configuration Table Structure */
|
|
struct HostWrite {
|
|
u32 TransportRequest;
|
|
u32 Reserved;
|
|
u32 CoalIntDelay;
|
|
u32 CoalIntCount;
|
|
};
|
|
|
|
#define SIMPLE_MODE 0x02
|
|
#define PERFORMANT_MODE 0x04
|
|
#define MEMQ_MODE 0x08
|
|
|
|
struct CfgTable {
|
|
u8 Signature[4];
|
|
u32 SpecValence;
|
|
u32 TransportSupport;
|
|
u32 TransportActive;
|
|
struct HostWrite HostWrite;
|
|
u32 CmdsOutMax;
|
|
u32 BusTypes;
|
|
u32 TransMethodOffset;
|
|
u8 ServerName[16];
|
|
u32 HeartBeat;
|
|
u32 SCSI_Prefetch;
|
|
u32 MaxScatterGatherElements;
|
|
u32 MaxLogicalUnits;
|
|
u32 MaxPhysicalDevices;
|
|
u32 MaxPhysicalDrivesPerLogicalUnit;
|
|
u32 MaxPerformantModeCommands;
|
|
u8 reserved[0x78 - 0x58];
|
|
u32 misc_fw_support; /* offset 0x78 */
|
|
#define MISC_FW_DOORBELL_RESET (0x02)
|
|
};
|
|
|
|
#define NUM_BLOCKFETCH_ENTRIES 8
|
|
struct TransTable_struct {
|
|
u32 BlockFetch[NUM_BLOCKFETCH_ENTRIES];
|
|
u32 RepQSize;
|
|
u32 RepQCount;
|
|
u32 RepQCtrAddrLow32;
|
|
u32 RepQCtrAddrHigh32;
|
|
u32 RepQAddr0Low32;
|
|
u32 RepQAddr0High32;
|
|
};
|
|
|
|
struct hpsa_pci_info {
|
|
unsigned char bus;
|
|
unsigned char dev_fn;
|
|
unsigned short domain;
|
|
u32 board_id;
|
|
};
|
|
|
|
#pragma pack()
|
|
#endif /* HPSA_CMD_H */
|