korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-29 14:05:19 +08:00
Code Issues Packages Projects Releases Wiki Activity
750375003d
linux/arch/sparc/mm/ultra.S
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

1103 lines
25 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* ultra.S: Don't expand these all over the place...
*
* Copyright (C) 1997, 2000, 2008 David S. Miller (davem@davemloft.net)
*/
#include <asm/asi.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/spitfire.h>
#include <asm/mmu_context.h>
#include <asm/mmu.h>
#include <asm/pil.h>
#include <asm/head.h>
#include <asm/thread_info.h>
#include <asm/cacheflush.h>
#include <asm/hypervisor.h>
#include <asm/cpudata.h>
/* Basically, most of the Spitfire vs. Cheetah madness
* has to do with the fact that Cheetah does not support
* IMMU flushes out of the secondary context. Someone needs
* to throw a south lake birthday party for the folks
* in Microelectronics who refused to fix this shit.
*/
/* This file is meant to be read efficiently by the CPU, not humans.
* Staraj sie tego nikomu nie pierdolnac...
*/
.text
.align 32
.globl __flush_tlb_mm
__flush_tlb_mm: /* 19 insns */
/* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */
ldxa [%o1] ASI_DMMU, %g2
cmp %g2, %o0
bne,pn %icc, __spitfire_flush_tlb_mm_slow
mov 0x50, %g3
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
sethi %hi(KERNBASE), %g3
flush %g3
retl
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
.align 32
.globl __flush_tlb_page
__flush_tlb_page: /* 22 insns */
/* %o0 = context, %o1 = vaddr */
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, %pstate
mov SECONDARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
stxa %o0, [%o4] ASI_DMMU
andcc %o1, 1, %g0
andn %o1, 1, %o3
be,pn %icc, 1f
or %o3, 0x10, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
1: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
retl
wrpr %g7, 0x0, %pstate
nop
nop
nop
nop
.align 32
.globl __flush_tlb_pending
__flush_tlb_pending: /* 27 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
sllx %o1, 3, %o1
andn %g7, PSTATE_IE, %g2
wrpr %g2, %pstate
mov SECONDARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
stxa %o0, [%o4] ASI_DMMU
1: sub %o1, (1 << 3), %o1
ldx [%o2 + %o1], %o3
andcc %o3, 1, %g0
andn %o3, 1, %o3
be,pn %icc, 2f
or %o3, 0x10, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %o1, 1b
nop
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
retl
wrpr %g7, 0x0, %pstate
nop
nop
nop
nop
.align 32
.globl __flush_tlb_kernel_range
__flush_tlb_kernel_range: /* 31 insns */
/* %o0=start, %o1=end */
cmp %o0, %o1
be,pn %xcc, 2f
sub %o1, %o0, %o3
srlx %o3, 18, %o4
brnz,pn %o4, __spitfire_flush_tlb_kernel_range_slow
sethi %hi(PAGE_SIZE), %o4
sub %o3, %o4, %o3
or %o0, 0x20, %o0 ! Nucleus
1: stxa %g0, [%o0 + %o3] ASI_DMMU_DEMAP
stxa %g0, [%o0 + %o3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %o3, 1b
sub %o3, %o4, %o3
2: sethi %hi(KERNBASE), %o3
flush %o3
retl
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
__spitfire_flush_tlb_kernel_range_slow:
mov 63 * 8, %o4
1: ldxa [%o4] ASI_ITLB_DATA_ACCESS, %o3
andcc %o3, 0x40, %g0 /* _PAGE_L_4U */
bne,pn %xcc, 2f
mov TLB_TAG_ACCESS, %o3
stxa %g0, [%o3] ASI_IMMU
stxa %g0, [%o4] ASI_ITLB_DATA_ACCESS
membar #Sync
2: ldxa [%o4] ASI_DTLB_DATA_ACCESS, %o3
andcc %o3, 0x40, %g0
bne,pn %xcc, 2f
mov TLB_TAG_ACCESS, %o3
stxa %g0, [%o3] ASI_DMMU
stxa %g0, [%o4] ASI_DTLB_DATA_ACCESS
membar #Sync
2: sub %o4, 8, %o4
brgez,pt %o4, 1b
nop
retl
nop
__spitfire_flush_tlb_mm_slow:
rdpr %pstate, %g1
wrpr %g1, PSTATE_IE, %pstate
stxa %o0, [%o1] ASI_DMMU
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
flush %g6
stxa %g2, [%o1] ASI_DMMU
sethi %hi(KERNBASE), %o1
flush %o1
retl
wrpr %g1, 0, %pstate
/*
* The following code flushes one page_size worth.
*/
.section .kprobes.text, "ax"
.align 32
.globl __flush_icache_page
__flush_icache_page: /* %o0 = phys_page */
srlx %o0, PAGE_SHIFT, %o0
sethi %hi(PAGE_OFFSET), %g1
sllx %o0, PAGE_SHIFT, %o0
sethi %hi(PAGE_SIZE), %g2
ldx [%g1 + %lo(PAGE_OFFSET)], %g1
add %o0, %g1, %o0
1: subcc %g2, 32, %g2
bne,pt %icc, 1b
flush %o0 + %g2
retl
nop
#ifdef DCACHE_ALIASING_POSSIBLE
#if (PAGE_SHIFT != 13)
#error only page shift of 13 is supported by dcache flush
#endif
#define DTAG_MASK 0x3
/* This routine is Spitfire specific so the hardcoded
* D-cache size and line-size are OK.
*/
.align 64
.globl __flush_dcache_page
__flush_dcache_page: /* %o0=kaddr, %o1=flush_icache */
sethi %hi(PAGE_OFFSET), %g1
ldx [%g1 + %lo(PAGE_OFFSET)], %g1
sub %o0, %g1, %o0 ! physical address
srlx %o0, 11, %o0 ! make D-cache TAG
sethi %hi(1 << 14), %o2 ! D-cache size
sub %o2, (1 << 5), %o2 ! D-cache line size
1: ldxa [%o2] ASI_DCACHE_TAG, %o3 ! load D-cache TAG
andcc %o3, DTAG_MASK, %g0 ! Valid?
be,pn %xcc, 2f ! Nope, branch
andn %o3, DTAG_MASK, %o3 ! Clear valid bits
cmp %o3, %o0 ! TAG match?
bne,pt %xcc, 2f ! Nope, branch
nop
stxa %g0, [%o2] ASI_DCACHE_TAG ! Invalidate TAG
membar #Sync
2: brnz,pt %o2, 1b
sub %o2, (1 << 5), %o2 ! D-cache line size
/* The I-cache does not snoop local stores so we
* better flush that too when necessary.
*/
brnz,pt %o1, __flush_icache_page
sllx %o0, 11, %o0
retl
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
.previous
/* Cheetah specific versions, patched at boot time. */
__cheetah_flush_tlb_mm: /* 19 insns */
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o2
mov 0x40, %g3
ldxa [%o2] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o1
sllx %o1, CTX_PGSZ1_NUC_SHIFT, %o1
or %o0, %o1, %o0 /* Preserve nucleus page size fields */
stxa %o0, [%o2] ASI_DMMU
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
stxa %g2, [%o2] ASI_DMMU
sethi %hi(KERNBASE), %o2
flush %o2
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
__cheetah_flush_tlb_page: /* 22 insns */
/* %o0 = context, %o1 = vaddr */
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3
sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3
or %o0, %o3, %o0 /* Preserve nucleus page size fields */
stxa %o0, [%o4] ASI_DMMU
andcc %o1, 1, %g0
be,pn %icc, 1f
andn %o1, 1, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
1: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
__cheetah_flush_tlb_pending: /* 27 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
sllx %o1, 3, %o1
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3
sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3
or %o0, %o3, %o0 /* Preserve nucleus page size fields */
stxa %o0, [%o4] ASI_DMMU
1: sub %o1, (1 << 3), %o1
ldx [%o2 + %o1], %o3
andcc %o3, 1, %g0
be,pn %icc, 2f
andn %o3, 1, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %o1, 1b
nop
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
__cheetah_flush_tlb_kernel_range: /* 31 insns */
/* %o0=start, %o1=end */
cmp %o0, %o1
be,pn %xcc, 2f
sub %o1, %o0, %o3
srlx %o3, 18, %o4
brnz,pn %o4, 3f
sethi %hi(PAGE_SIZE), %o4
sub %o3, %o4, %o3
or %o0, 0x20, %o0 ! Nucleus
1: stxa %g0, [%o0 + %o3] ASI_DMMU_DEMAP
stxa %g0, [%o0 + %o3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %o3, 1b
sub %o3, %o4, %o3
2: sethi %hi(KERNBASE), %o3
flush %o3
retl
nop
3: mov 0x80, %o4
stxa %g0, [%o4] ASI_DMMU_DEMAP
membar #Sync
stxa %g0, [%o4] ASI_IMMU_DEMAP
membar #Sync
retl
nop
nop
nop
nop
nop
nop
nop
nop
#ifdef DCACHE_ALIASING_POSSIBLE
__cheetah_flush_dcache_page: /* 11 insns */
sethi %hi(PAGE_OFFSET), %g1
ldx [%g1 + %lo(PAGE_OFFSET)], %g1
sub %o0, %g1, %o0
sethi %hi(PAGE_SIZE), %o4
1: subcc %o4, (1 << 5), %o4
stxa %g0, [%o0 + %o4] ASI_DCACHE_INVALIDATE
membar #Sync
bne,pt %icc, 1b
nop
retl /* I-cache flush never needed on Cheetah, see callers. */
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
/* Hypervisor specific versions, patched at boot time. */
__hypervisor_tlb_tl0_error:
save %sp, -192, %sp
mov %i0, %o0
call hypervisor_tlbop_error
mov %i1, %o1
ret
restore
__hypervisor_flush_tlb_mm: /* 19 insns */
mov %o0, %o2 /* ARG2: mmu context */
mov 0, %o0 /* ARG0: CPU lists unimplemented */
mov 0, %o1 /* ARG1: CPU lists unimplemented */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
brnz,pn %o0, 1f
mov HV_FAST_MMU_DEMAP_CTX, %o1
retl
nop
1: sethi %hi(__hypervisor_tlb_tl0_error), %o5
jmpl %o5 + %lo(__hypervisor_tlb_tl0_error), %g0
nop
nop
nop
nop
nop
nop
nop
__hypervisor_flush_tlb_page: /* 22 insns */
/* %o0 = context, %o1 = vaddr */
mov %o0, %g2
mov %o1, %o0 /* ARG0: vaddr + IMMU-bit */
mov %g2, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
sllx %o0, PAGE_SHIFT, %o0
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pn %o0, 1f
mov HV_MMU_UNMAP_ADDR_TRAP, %o1
retl
nop
1: sethi %hi(__hypervisor_tlb_tl0_error), %o2
jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0
nop
nop
nop
nop
nop
nop
nop
nop
nop
__hypervisor_flush_tlb_pending: /* 27 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
sllx %o1, 3, %g1
mov %o2, %g2
mov %o0, %g3
1: sub %g1, (1 << 3), %g1
ldx [%g2 + %g1], %o0 /* ARG0: vaddr + IMMU-bit */
mov %g3, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
sllx %o0, PAGE_SHIFT, %o0
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pn %o0, 1f
mov HV_MMU_UNMAP_ADDR_TRAP, %o1
brnz,pt %g1, 1b
nop
retl
nop
1: sethi %hi(__hypervisor_tlb_tl0_error), %o2
jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0
nop
nop
nop
nop
nop
nop
nop
nop
nop
__hypervisor_flush_tlb_kernel_range: /* 31 insns */
/* %o0=start, %o1=end */
cmp %o0, %o1
be,pn %xcc, 2f
sub %o1, %o0, %g2
srlx %g2, 18, %g3
brnz,pn %g3, 4f
mov %o0, %g1
sethi %hi(PAGE_SIZE), %g3
sub %g2, %g3, %g2
1: add %g1, %g2, %o0 /* ARG0: virtual address */
mov 0, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pn %o0, 3f
mov HV_MMU_UNMAP_ADDR_TRAP, %o1
brnz,pt %g2, 1b
sub %g2, %g3, %g2
2: retl
nop
3: sethi %hi(__hypervisor_tlb_tl0_error), %o2
jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0
nop
4: mov 0, %o0 /* ARG0: CPU lists unimplemented */
mov 0, %o1 /* ARG1: CPU lists unimplemented */
mov 0, %o2 /* ARG2: mmu context == nucleus */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
brnz,pn %o0, 3b
mov HV_FAST_MMU_DEMAP_CTX, %o1
retl
nop
#ifdef DCACHE_ALIASING_POSSIBLE
/* XXX Niagara and friends have an 8K cache, so no aliasing is
* XXX possible, but nothing explicit in the Hypervisor API
* XXX guarantees this.
*/
__hypervisor_flush_dcache_page: /* 2 insns */
retl
nop
#endif
tlb_patch_one:
1: lduw [%o1], %g1
stw %g1, [%o0]
flush %o0
subcc %o2, 1, %o2
add %o1, 4, %o1
bne,pt %icc, 1b
add %o0, 4, %o0
retl
nop
#ifdef CONFIG_SMP
/* These are all called by the slaves of a cross call, at
* trap level 1, with interrupts fully disabled.
*
* Register usage:
* %g5 mm->context (all tlb flushes)
* %g1 address arg 1 (tlb page and range flushes)
* %g7 address arg 2 (tlb range flush only)
*
* %g6 scratch 1
* %g2 scratch 2
* %g3 scratch 3
* %g4 scratch 4
*/
.align 32
.globl xcall_flush_tlb_mm
xcall_flush_tlb_mm: /* 24 insns */
mov PRIMARY_CONTEXT, %g2
ldxa [%g2] ASI_DMMU, %g3
srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4
sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4
or %g5, %g4, %g5 /* Preserve nucleus page size fields */
stxa %g5, [%g2] ASI_DMMU
mov 0x40, %g4
stxa %g0, [%g4] ASI_DMMU_DEMAP
stxa %g0, [%g4] ASI_IMMU_DEMAP
stxa %g3, [%g2] ASI_DMMU
retry
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
.globl xcall_flush_tlb_page
xcall_flush_tlb_page: /* 20 insns */
/* %g5=context, %g1=vaddr */
mov PRIMARY_CONTEXT, %g4
ldxa [%g4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %g4
sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4
or %g5, %g4, %g5
mov PRIMARY_CONTEXT, %g4
stxa %g5, [%g4] ASI_DMMU
andcc %g1, 0x1, %g0
be,pn %icc, 2f
andn %g1, 0x1, %g5
stxa %g0, [%g5] ASI_IMMU_DEMAP
2: stxa %g0, [%g5] ASI_DMMU_DEMAP
membar #Sync
stxa %g2, [%g4] ASI_DMMU
retry
nop
nop
nop
nop
nop
.globl xcall_flush_tlb_kernel_range
xcall_flush_tlb_kernel_range: /* 44 insns */
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
srlx %g3, 18, %g2
brnz,pn %g2, 2f
add %g2, 1, %g2
sub %g3, %g2, %g3
or %g1, 0x20, %g1 ! Nucleus
1: stxa %g0, [%g1 + %g3] ASI_DMMU_DEMAP
stxa %g0, [%g1 + %g3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %g3, 1b
sub %g3, %g2, %g3
retry
2: mov 63 * 8, %g1
1: ldxa [%g1] ASI_ITLB_DATA_ACCESS, %g2
andcc %g2, 0x40, %g0 /* _PAGE_L_4U */
bne,pn %xcc, 2f
mov TLB_TAG_ACCESS, %g2
stxa %g0, [%g2] ASI_IMMU
stxa %g0, [%g1] ASI_ITLB_DATA_ACCESS
membar #Sync
2: ldxa [%g1] ASI_DTLB_DATA_ACCESS, %g2
andcc %g2, 0x40, %g0
bne,pn %xcc, 2f
mov TLB_TAG_ACCESS, %g2
stxa %g0, [%g2] ASI_DMMU
stxa %g0, [%g1] ASI_DTLB_DATA_ACCESS
membar #Sync
2: sub %g1, 8, %g1
brgez,pt %g1, 1b
nop
retry
nop
nop
nop
nop
nop
nop
nop
nop
nop
/* This runs in a very controlled environment, so we do
* not need to worry about BH races etc.
*/
.globl xcall_sync_tick
xcall_sync_tick:
661: rdpr %pstate, %g2
wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
.section .sun4v_2insn_patch, "ax"
.word 661b
nop
nop
.previous
rdpr %pil, %g2
wrpr %g0, PIL_NORMAL_MAX, %pil
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
#ifdef CONFIG_TRACE_IRQFLAGS
call trace_hardirqs_off
nop
#endif
call smp_synchronize_tick_client
nop
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
.globl xcall_fetch_glob_regs
xcall_fetch_glob_regs:
sethi %hi(global_cpu_snapshot), %g1
or %g1, %lo(global_cpu_snapshot), %g1
__GET_CPUID(%g2)
sllx %g2, 6, %g3
add %g1, %g3, %g1
rdpr %tstate, %g7
stx %g7, [%g1 + GR_SNAP_TSTATE]
rdpr %tpc, %g7
stx %g7, [%g1 + GR_SNAP_TPC]
rdpr %tnpc, %g7
stx %g7, [%g1 + GR_SNAP_TNPC]
stx %o7, [%g1 + GR_SNAP_O7]
stx %i7, [%g1 + GR_SNAP_I7]
/* Don't try this at home kids... */
rdpr %cwp, %g3
sub %g3, 1, %g7
wrpr %g7, %cwp
mov %i7, %g7
wrpr %g3, %cwp
stx %g7, [%g1 + GR_SNAP_RPC]
sethi %hi(trap_block), %g7
or %g7, %lo(trap_block), %g7
sllx %g2, TRAP_BLOCK_SZ_SHIFT, %g2
add %g7, %g2, %g7
ldx [%g7 + TRAP_PER_CPU_THREAD], %g3
stx %g3, [%g1 + GR_SNAP_THREAD]
retry
.globl xcall_fetch_glob_pmu
xcall_fetch_glob_pmu:
sethi %hi(global_cpu_snapshot), %g1
or %g1, %lo(global_cpu_snapshot), %g1
__GET_CPUID(%g2)
sllx %g2, 6, %g3
add %g1, %g3, %g1
rd %pic, %g7
stx %g7, [%g1 + (4 * 8)]
rd %pcr, %g7
stx %g7, [%g1 + (0 * 8)]
retry
.globl xcall_fetch_glob_pmu_n4
xcall_fetch_glob_pmu_n4:
sethi %hi(global_cpu_snapshot), %g1
or %g1, %lo(global_cpu_snapshot), %g1
__GET_CPUID(%g2)
sllx %g2, 6, %g3
add %g1, %g3, %g1
ldxa [%g0] ASI_PIC, %g7
stx %g7, [%g1 + (4 * 8)]
mov 0x08, %g3
ldxa [%g3] ASI_PIC, %g7
stx %g7, [%g1 + (5 * 8)]
mov 0x10, %g3
ldxa [%g3] ASI_PIC, %g7
stx %g7, [%g1 + (6 * 8)]
mov 0x18, %g3
ldxa [%g3] ASI_PIC, %g7
stx %g7, [%g1 + (7 * 8)]
mov %o0, %g2
mov %o1, %g3
mov %o5, %g7
mov HV_FAST_VT_GET_PERFREG, %o5
mov 3, %o0
ta HV_FAST_TRAP
stx %o1, [%g1 + (3 * 8)]
mov HV_FAST_VT_GET_PERFREG, %o5
mov 2, %o0
ta HV_FAST_TRAP
stx %o1, [%g1 + (2 * 8)]
mov HV_FAST_VT_GET_PERFREG, %o5
mov 1, %o0
ta HV_FAST_TRAP
stx %o1, [%g1 + (1 * 8)]
mov HV_FAST_VT_GET_PERFREG, %o5
mov 0, %o0
ta HV_FAST_TRAP
stx %o1, [%g1 + (0 * 8)]
mov %g2, %o0
mov %g3, %o1
mov %g7, %o5
retry
__cheetah_xcall_flush_tlb_kernel_range: /* 44 insns */
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
srlx %g3, 18, %g2
brnz,pn %g2, 2f
add %g2, 1, %g2
sub %g3, %g2, %g3
or %g1, 0x20, %g1 ! Nucleus
1: stxa %g0, [%g1 + %g3] ASI_DMMU_DEMAP
stxa %g0, [%g1 + %g3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %g3, 1b
sub %g3, %g2, %g3
retry
2: mov 0x80, %g2
stxa %g0, [%g2] ASI_DMMU_DEMAP
membar #Sync
stxa %g0, [%g2] ASI_IMMU_DEMAP
membar #Sync
retry
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
#ifdef DCACHE_ALIASING_POSSIBLE
.align 32
.globl xcall_flush_dcache_page_cheetah
xcall_flush_dcache_page_cheetah: /* %g1 == physical page address */
sethi %hi(PAGE_SIZE), %g3
1: subcc %g3, (1 << 5), %g3
stxa %g0, [%g1 + %g3] ASI_DCACHE_INVALIDATE
membar #Sync
bne,pt %icc, 1b
nop
retry
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
.globl xcall_flush_dcache_page_spitfire
xcall_flush_dcache_page_spitfire: /* %g1 == physical page address
%g7 == kernel page virtual address
%g5 == (page->mapping != NULL) */
#ifdef DCACHE_ALIASING_POSSIBLE
srlx %g1, (13 - 2), %g1 ! Form tag comparitor
sethi %hi(L1DCACHE_SIZE), %g3 ! D$ size == 16K
sub %g3, (1 << 5), %g3 ! D$ linesize == 32
1: ldxa [%g3] ASI_DCACHE_TAG, %g2
andcc %g2, 0x3, %g0
be,pn %xcc, 2f
andn %g2, 0x3, %g2
cmp %g2, %g1
bne,pt %xcc, 2f
nop
stxa %g0, [%g3] ASI_DCACHE_TAG
membar #Sync
2: cmp %g3, 0
bne,pt %xcc, 1b
sub %g3, (1 << 5), %g3
brz,pn %g5, 2f
#endif /* DCACHE_ALIASING_POSSIBLE */
sethi %hi(PAGE_SIZE), %g3
1: flush %g7
subcc %g3, (1 << 5), %g3
bne,pt %icc, 1b
add %g7, (1 << 5), %g7
2: retry
nop
nop
/* %g5: error
* %g6: tlb op
*/
__hypervisor_tlb_xcall_error:
mov %g5, %g4
mov %g6, %g5
ba,pt %xcc, etrap
rd %pc, %g7
mov %l4, %o0
call hypervisor_tlbop_error_xcall
mov %l5, %o1
ba,a,pt %xcc, rtrap
.globl __hypervisor_xcall_flush_tlb_mm
__hypervisor_xcall_flush_tlb_mm: /* 24 insns */
/* %g5=ctx, g1,g2,g3,g4,g7=scratch, %g6=unusable */
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
mov %o3, %g1
mov %o5, %g7
clr %o0 /* ARG0: CPU lists unimplemented */
clr %o1 /* ARG1: CPU lists unimplemented */
mov %g5, %o2 /* ARG2: mmu context */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
mov HV_FAST_MMU_DEMAP_CTX, %g6
brnz,pn %o0, 1f
mov %o0, %g5
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
mov %g1, %o3
mov %g7, %o5
membar #Sync
retry
1: sethi %hi(__hypervisor_tlb_xcall_error), %g4
jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0
nop
.globl __hypervisor_xcall_flush_tlb_page
__hypervisor_xcall_flush_tlb_page: /* 20 insns */
/* %g5=ctx, %g1=vaddr */
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
mov %g1, %o0 /* ARG0: virtual address */
mov %g5, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
sllx %o0, PAGE_SHIFT, %o0
ta HV_MMU_UNMAP_ADDR_TRAP
mov HV_MMU_UNMAP_ADDR_TRAP, %g6
brnz,a,pn %o0, 1f
mov %o0, %g5
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
membar #Sync
retry
1: sethi %hi(__hypervisor_tlb_xcall_error), %g4
jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0
nop
.globl __hypervisor_xcall_flush_tlb_kernel_range
__hypervisor_xcall_flush_tlb_kernel_range: /* 44 insns */
/* %g1=start, %g7=end, g2,g3,g4,g5,g6=scratch */
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
srlx %g3, 18, %g7
add %g2, 1, %g2
sub %g3, %g2, %g3
mov %o0, %g2
mov %o1, %g4
brnz,pn %g7, 2f
mov %o2, %g7
1: add %g1, %g3, %o0 /* ARG0: virtual address */
mov 0, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
mov HV_MMU_UNMAP_ADDR_TRAP, %g6
brnz,pn %o0, 1f
mov %o0, %g5
sethi %hi(PAGE_SIZE), %o2
brnz,pt %g3, 1b
sub %g3, %o2, %g3
5: mov %g2, %o0
mov %g4, %o1
mov %g7, %o2
membar #Sync
retry
1: sethi %hi(__hypervisor_tlb_xcall_error), %g4
jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0
nop
2: mov %o3, %g1
mov %o5, %g3
mov 0, %o0 /* ARG0: CPU lists unimplemented */
mov 0, %o1 /* ARG1: CPU lists unimplemented */
mov 0, %o2 /* ARG2: mmu context == nucleus */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
mov %g1, %o3
brz,pt %o0, 5b
mov %g3, %o5
mov HV_FAST_MMU_DEMAP_CTX, %g6
ba,pt %xcc, 1b
clr %g5
/* These just get rescheduled to PIL vectors. */
.globl xcall_call_function
xcall_call_function:
wr %g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
retry
.globl xcall_call_function_single
xcall_call_function_single:
wr %g0, (1 << PIL_SMP_CALL_FUNC_SNGL), %set_softint
retry
.globl xcall_receive_signal
xcall_receive_signal:
wr %g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
retry
.globl xcall_capture
xcall_capture:
wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint
retry
#ifdef CONFIG_KGDB
.globl xcall_kgdb_capture
xcall_kgdb_capture:
wr %g0, (1 << PIL_KGDB_CAPTURE), %set_softint
retry
#endif
#endif /* CONFIG_SMP */
.globl cheetah_patch_cachetlbops
cheetah_patch_cachetlbops:
save %sp, -128, %sp
sethi %hi(__flush_tlb_mm), %o0
or %o0, %lo(__flush_tlb_mm), %o0
sethi %hi(__cheetah_flush_tlb_mm), %o1
or %o1, %lo(__cheetah_flush_tlb_mm), %o1
call tlb_patch_one
mov 19, %o2
sethi %hi(__flush_tlb_page), %o0
or %o0, %lo(__flush_tlb_page), %o0
sethi %hi(__cheetah_flush_tlb_page), %o1
or %o1, %lo(__cheetah_flush_tlb_page), %o1
call tlb_patch_one
mov 22, %o2
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__cheetah_flush_tlb_pending), %o1
or %o1, %lo(__cheetah_flush_tlb_pending), %o1
call tlb_patch_one
mov 27, %o2
sethi %hi(__flush_tlb_kernel_range), %o0
or %o0, %lo(__flush_tlb_kernel_range), %o0
sethi %hi(__cheetah_flush_tlb_kernel_range), %o1
or %o1, %lo(__cheetah_flush_tlb_kernel_range), %o1
call tlb_patch_one
mov 31, %o2
#ifdef DCACHE_ALIASING_POSSIBLE
sethi %hi(__flush_dcache_page), %o0
or %o0, %lo(__flush_dcache_page), %o0
sethi %hi(__cheetah_flush_dcache_page), %o1
or %o1, %lo(__cheetah_flush_dcache_page), %o1
call tlb_patch_one
mov 11, %o2
#endif /* DCACHE_ALIASING_POSSIBLE */
#ifdef CONFIG_SMP
sethi %hi(xcall_flush_tlb_kernel_range), %o0
or %o0, %lo(xcall_flush_tlb_kernel_range), %o0
sethi %hi(__cheetah_xcall_flush_tlb_kernel_range), %o1
or %o1, %lo(__cheetah_xcall_flush_tlb_kernel_range), %o1
call tlb_patch_one
mov 44, %o2
#endif /* CONFIG_SMP */
ret
restore
.globl hypervisor_patch_cachetlbops
hypervisor_patch_cachetlbops:
save %sp, -128, %sp
sethi %hi(__flush_tlb_mm), %o0
or %o0, %lo(__flush_tlb_mm), %o0
sethi %hi(__hypervisor_flush_tlb_mm), %o1
or %o1, %lo(__hypervisor_flush_tlb_mm), %o1
call tlb_patch_one
mov 19, %o2
sethi %hi(__flush_tlb_page), %o0
or %o0, %lo(__flush_tlb_page), %o0
sethi %hi(__hypervisor_flush_tlb_page), %o1
or %o1, %lo(__hypervisor_flush_tlb_page), %o1
call tlb_patch_one
mov 22, %o2
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__hypervisor_flush_tlb_pending), %o1
or %o1, %lo(__hypervisor_flush_tlb_pending), %o1
call tlb_patch_one
mov 27, %o2
sethi %hi(__flush_tlb_kernel_range), %o0
or %o0, %lo(__flush_tlb_kernel_range), %o0
sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1
or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1
call tlb_patch_one
mov 31, %o2
#ifdef DCACHE_ALIASING_POSSIBLE
sethi %hi(__flush_dcache_page), %o0
or %o0, %lo(__flush_dcache_page), %o0
sethi %hi(__hypervisor_flush_dcache_page), %o1
or %o1, %lo(__hypervisor_flush_dcache_page), %o1
call tlb_patch_one
mov 2, %o2
#endif /* DCACHE_ALIASING_POSSIBLE */
#ifdef CONFIG_SMP
sethi %hi(xcall_flush_tlb_mm), %o0
or %o0, %lo(xcall_flush_tlb_mm), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_mm), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_mm), %o1
call tlb_patch_one
mov 24, %o2
sethi %hi(xcall_flush_tlb_page), %o0
or %o0, %lo(xcall_flush_tlb_page), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_page), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_page), %o1
call tlb_patch_one
mov 20, %o2
sethi %hi(xcall_flush_tlb_kernel_range), %o0
or %o0, %lo(xcall_flush_tlb_kernel_range), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1
call tlb_patch_one
mov 44, %o2
#endif /* CONFIG_SMP */
ret
restore
Reference in New Issue View Git Blame Copy Permalink