mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-03 00:54:09 +08:00
215e50b086
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
282 lines
7.5 KiB
C
282 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// max77686.c - mfd core driver for the Maxim 77686/802
|
|
//
|
|
// Copyright (C) 2012 Samsung Electronics
|
|
// Chiwoong Byun <woong.byun@samsung.com>
|
|
// Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
//
|
|
//This driver is based on max8997.c
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/max77686.h>
|
|
#include <linux/mfd/max77686-private.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
|
|
static const struct mfd_cell max77686_devs[] = {
|
|
{ .name = "max77686-pmic", },
|
|
{ .name = "max77686-rtc", },
|
|
{ .name = "max77686-clk", },
|
|
};
|
|
|
|
static const struct mfd_cell max77802_devs[] = {
|
|
{ .name = "max77802-pmic", },
|
|
{ .name = "max77802-clk", },
|
|
{ .name = "max77802-rtc", },
|
|
};
|
|
|
|
static bool max77802_pmic_is_accessible_reg(struct device *dev,
|
|
unsigned int reg)
|
|
{
|
|
return reg < MAX77802_REG_PMIC_END;
|
|
}
|
|
|
|
static bool max77802_rtc_is_accessible_reg(struct device *dev,
|
|
unsigned int reg)
|
|
{
|
|
return (reg >= MAX77802_RTC_INT && reg < MAX77802_RTC_END);
|
|
}
|
|
|
|
static bool max77802_is_accessible_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (max77802_pmic_is_accessible_reg(dev, reg) ||
|
|
max77802_rtc_is_accessible_reg(dev, reg));
|
|
}
|
|
|
|
static bool max77802_pmic_is_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (reg == MAX77802_REG_INTSRC || reg == MAX77802_REG_INT1 ||
|
|
reg == MAX77802_REG_INT2);
|
|
}
|
|
|
|
static bool max77802_rtc_is_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (reg == MAX77802_RTC_INT ||
|
|
reg == MAX77802_RTC_UPDATE0 ||
|
|
reg == MAX77802_RTC_UPDATE1);
|
|
}
|
|
|
|
static bool max77802_is_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (max77802_pmic_is_precious_reg(dev, reg) ||
|
|
max77802_rtc_is_precious_reg(dev, reg));
|
|
}
|
|
|
|
static bool max77802_pmic_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (max77802_is_precious_reg(dev, reg) ||
|
|
reg == MAX77802_REG_STATUS1 || reg == MAX77802_REG_STATUS2 ||
|
|
reg == MAX77802_REG_PWRON);
|
|
}
|
|
|
|
static bool max77802_rtc_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (max77802_rtc_is_precious_reg(dev, reg) ||
|
|
reg == MAX77802_RTC_SEC ||
|
|
reg == MAX77802_RTC_MIN ||
|
|
reg == MAX77802_RTC_HOUR ||
|
|
reg == MAX77802_RTC_WEEKDAY ||
|
|
reg == MAX77802_RTC_MONTH ||
|
|
reg == MAX77802_RTC_YEAR ||
|
|
reg == MAX77802_RTC_DATE);
|
|
}
|
|
|
|
static bool max77802_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return (max77802_pmic_is_volatile_reg(dev, reg) ||
|
|
max77802_rtc_is_volatile_reg(dev, reg));
|
|
}
|
|
|
|
static const struct regmap_config max77686_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static const struct regmap_config max77802_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.writeable_reg = max77802_is_accessible_reg,
|
|
.readable_reg = max77802_is_accessible_reg,
|
|
.precious_reg = max77802_is_precious_reg,
|
|
.volatile_reg = max77802_is_volatile_reg,
|
|
.name = "max77802-pmic",
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const struct regmap_irq max77686_irqs[] = {
|
|
/* INT1 interrupts */
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_PWRONF_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_PWRONR_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_JIGONBF_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_JIGONBR_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_ACOKBF_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_ACOKBR_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_ONKEY1S_MSK, },
|
|
{ .reg_offset = 0, .mask = MAX77686_INT1_MRSTB_MSK, },
|
|
/* INT2 interrupts */
|
|
{ .reg_offset = 1, .mask = MAX77686_INT2_140C_MSK, },
|
|
{ .reg_offset = 1, .mask = MAX77686_INT2_120C_MSK, },
|
|
};
|
|
|
|
static const struct regmap_irq_chip max77686_irq_chip = {
|
|
.name = "max77686-pmic",
|
|
.status_base = MAX77686_REG_INT1,
|
|
.mask_base = MAX77686_REG_INT1MSK,
|
|
.num_regs = 2,
|
|
.irqs = max77686_irqs,
|
|
.num_irqs = ARRAY_SIZE(max77686_irqs),
|
|
};
|
|
|
|
static const struct regmap_irq_chip max77802_irq_chip = {
|
|
.name = "max77802-pmic",
|
|
.status_base = MAX77802_REG_INT1,
|
|
.mask_base = MAX77802_REG_INT1MSK,
|
|
.num_regs = 2,
|
|
.irqs = max77686_irqs, /* same masks as 77686 */
|
|
.num_irqs = ARRAY_SIZE(max77686_irqs),
|
|
};
|
|
|
|
static const struct of_device_id max77686_pmic_dt_match[] = {
|
|
{
|
|
.compatible = "maxim,max77686",
|
|
.data = (void *)TYPE_MAX77686,
|
|
},
|
|
{
|
|
.compatible = "maxim,max77802",
|
|
.data = (void *)TYPE_MAX77802,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max77686_pmic_dt_match);
|
|
|
|
static int max77686_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
struct max77686_dev *max77686 = NULL;
|
|
unsigned int data;
|
|
int ret = 0;
|
|
const struct regmap_config *config;
|
|
const struct regmap_irq_chip *irq_chip;
|
|
const struct mfd_cell *cells;
|
|
int n_devs;
|
|
|
|
max77686 = devm_kzalloc(&i2c->dev,
|
|
sizeof(struct max77686_dev), GFP_KERNEL);
|
|
if (!max77686)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, max77686);
|
|
max77686->type = (unsigned long)of_device_get_match_data(&i2c->dev);
|
|
max77686->dev = &i2c->dev;
|
|
max77686->i2c = i2c;
|
|
|
|
max77686->irq = i2c->irq;
|
|
|
|
if (max77686->type == TYPE_MAX77686) {
|
|
config = &max77686_regmap_config;
|
|
irq_chip = &max77686_irq_chip;
|
|
cells = max77686_devs;
|
|
n_devs = ARRAY_SIZE(max77686_devs);
|
|
} else {
|
|
config = &max77802_regmap_config;
|
|
irq_chip = &max77802_irq_chip;
|
|
cells = max77802_devs;
|
|
n_devs = ARRAY_SIZE(max77802_devs);
|
|
}
|
|
|
|
max77686->regmap = devm_regmap_init_i2c(i2c, config);
|
|
if (IS_ERR(max77686->regmap)) {
|
|
ret = PTR_ERR(max77686->regmap);
|
|
dev_err(max77686->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(max77686->regmap, MAX77686_REG_DEVICE_ID, &data);
|
|
if (ret < 0) {
|
|
dev_err(max77686->dev,
|
|
"device not found on this channel (this is not an error)\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = devm_regmap_add_irq_chip(&i2c->dev, max77686->regmap,
|
|
max77686->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED, 0, irq_chip,
|
|
&max77686->irq_data);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_mfd_add_devices(max77686->dev, -1, cells, n_devs, NULL,
|
|
0, NULL);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int max77686_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *i2c = to_i2c_client(dev);
|
|
struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(max77686->irq);
|
|
|
|
/*
|
|
* IRQ must be disabled during suspend because if it happens
|
|
* while suspended it will be handled before resuming I2C.
|
|
*
|
|
* When device is woken up from suspend (e.g. by RTC wake alarm),
|
|
* an interrupt occurs before resuming I2C bus controller.
|
|
* Interrupt handler tries to read registers but this read
|
|
* will fail because I2C is still suspended.
|
|
*/
|
|
disable_irq(max77686->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max77686_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *i2c = to_i2c_client(dev);
|
|
struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(max77686->irq);
|
|
|
|
enable_irq(max77686->irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(max77686_pm, max77686_suspend, max77686_resume);
|
|
|
|
static struct i2c_driver max77686_i2c_driver = {
|
|
.driver = {
|
|
.name = "max77686",
|
|
.pm = &max77686_pm,
|
|
.of_match_table = max77686_pmic_dt_match,
|
|
},
|
|
.probe_new = max77686_i2c_probe,
|
|
};
|
|
|
|
module_i2c_driver(max77686_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("MAXIM 77686/802 multi-function core driver");
|
|
MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|