linux/arch/x86/kvm/mmu/spte.c
Jason Baron b3646477d4 KVM: x86: use static calls to reduce kvm_x86_ops overhead
Convert kvm_x86_ops to use static calls. Note that all kvm_x86_ops are
covered here except for 'pmu_ops and 'nested ops'.

Here are some numbers running cpuid in a loop of 1 million calls averaged
over 5 runs, measured in the vm (lower is better).

Intel Xeon 3000MHz:

           |default    |mitigations=off
-------------------------------------
vanilla    |.671s      |.486s
static call|.573s(-15%)|.458s(-6%)

AMD EPYC 2500MHz:

           |default    |mitigations=off
-------------------------------------
vanilla    |.710s      |.609s
static call|.664s(-6%) |.609s(0%)

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Message-Id: <e057bf1b8a7ad15652df6eeba3f907ae758d3399.1610680941.git.jbaron@akamai.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 05:27:30 -05:00

319 lines
9.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Kernel-based Virtual Machine driver for Linux
*
* Macros and functions to access KVM PTEs (also known as SPTEs)
*
* Copyright (C) 2006 Qumranet, Inc.
* Copyright 2020 Red Hat, Inc. and/or its affiliates.
*/
#include <linux/kvm_host.h>
#include "mmu.h"
#include "mmu_internal.h"
#include "x86.h"
#include "spte.h"
#include <asm/e820/api.h>
u64 __read_mostly shadow_nx_mask;
u64 __read_mostly shadow_x_mask; /* mutual exclusive with nx_mask */
u64 __read_mostly shadow_user_mask;
u64 __read_mostly shadow_accessed_mask;
u64 __read_mostly shadow_dirty_mask;
u64 __read_mostly shadow_mmio_value;
u64 __read_mostly shadow_mmio_access_mask;
u64 __read_mostly shadow_present_mask;
u64 __read_mostly shadow_me_mask;
u64 __read_mostly shadow_acc_track_mask;
u64 __read_mostly shadow_nonpresent_or_rsvd_mask;
u64 __read_mostly shadow_nonpresent_or_rsvd_lower_gfn_mask;
u8 __read_mostly shadow_phys_bits;
static u64 generation_mmio_spte_mask(u64 gen)
{
u64 mask;
WARN_ON(gen & ~MMIO_SPTE_GEN_MASK);
BUILD_BUG_ON((MMIO_SPTE_GEN_HIGH_MASK | MMIO_SPTE_GEN_LOW_MASK) & SPTE_SPECIAL_MASK);
mask = (gen << MMIO_SPTE_GEN_LOW_SHIFT) & MMIO_SPTE_GEN_LOW_MASK;
mask |= (gen << MMIO_SPTE_GEN_HIGH_SHIFT) & MMIO_SPTE_GEN_HIGH_MASK;
return mask;
}
u64 make_mmio_spte(struct kvm_vcpu *vcpu, u64 gfn, unsigned int access)
{
u64 gen = kvm_vcpu_memslots(vcpu)->generation & MMIO_SPTE_GEN_MASK;
u64 mask = generation_mmio_spte_mask(gen);
u64 gpa = gfn << PAGE_SHIFT;
access &= shadow_mmio_access_mask;
mask |= shadow_mmio_value | access;
mask |= gpa | shadow_nonpresent_or_rsvd_mask;
mask |= (gpa & shadow_nonpresent_or_rsvd_mask)
<< SHADOW_NONPRESENT_OR_RSVD_MASK_LEN;
return mask;
}
static bool kvm_is_mmio_pfn(kvm_pfn_t pfn)
{
if (pfn_valid(pfn))
return !is_zero_pfn(pfn) && PageReserved(pfn_to_page(pfn)) &&
/*
* Some reserved pages, such as those from NVDIMM
* DAX devices, are not for MMIO, and can be mapped
* with cached memory type for better performance.
* However, the above check misconceives those pages
* as MMIO, and results in KVM mapping them with UC
* memory type, which would hurt the performance.
* Therefore, we check the host memory type in addition
* and only treat UC/UC-/WC pages as MMIO.
*/
(!pat_enabled() || pat_pfn_immune_to_uc_mtrr(pfn));
return !e820__mapped_raw_any(pfn_to_hpa(pfn),
pfn_to_hpa(pfn + 1) - 1,
E820_TYPE_RAM);
}
int make_spte(struct kvm_vcpu *vcpu, unsigned int pte_access, int level,
gfn_t gfn, kvm_pfn_t pfn, u64 old_spte, bool speculative,
bool can_unsync, bool host_writable, bool ad_disabled,
u64 *new_spte)
{
u64 spte = 0;
int ret = 0;
if (ad_disabled)
spte |= SPTE_AD_DISABLED_MASK;
else if (kvm_vcpu_ad_need_write_protect(vcpu))
spte |= SPTE_AD_WRPROT_ONLY_MASK;
/*
* For the EPT case, shadow_present_mask is 0 if hardware
* supports exec-only page table entries. In that case,
* ACC_USER_MASK and shadow_user_mask are used to represent
* read access. See FNAME(gpte_access) in paging_tmpl.h.
*/
spte |= shadow_present_mask;
if (!speculative)
spte |= spte_shadow_accessed_mask(spte);
if (level > PG_LEVEL_4K && (pte_access & ACC_EXEC_MASK) &&
is_nx_huge_page_enabled()) {
pte_access &= ~ACC_EXEC_MASK;
}
if (pte_access & ACC_EXEC_MASK)
spte |= shadow_x_mask;
else
spte |= shadow_nx_mask;
if (pte_access & ACC_USER_MASK)
spte |= shadow_user_mask;
if (level > PG_LEVEL_4K)
spte |= PT_PAGE_SIZE_MASK;
if (tdp_enabled)
spte |= static_call(kvm_x86_get_mt_mask)(vcpu, gfn,
kvm_is_mmio_pfn(pfn));
if (host_writable)
spte |= SPTE_HOST_WRITEABLE;
else
pte_access &= ~ACC_WRITE_MASK;
if (!kvm_is_mmio_pfn(pfn))
spte |= shadow_me_mask;
spte |= (u64)pfn << PAGE_SHIFT;
if (pte_access & ACC_WRITE_MASK) {
spte |= PT_WRITABLE_MASK | SPTE_MMU_WRITEABLE;
/*
* Optimization: for pte sync, if spte was writable the hash
* lookup is unnecessary (and expensive). Write protection
* is responsibility of mmu_get_page / kvm_sync_page.
* Same reasoning can be applied to dirty page accounting.
*/
if (!can_unsync && is_writable_pte(old_spte))
goto out;
if (mmu_need_write_protect(vcpu, gfn, can_unsync)) {
pgprintk("%s: found shadow page for %llx, marking ro\n",
__func__, gfn);
ret |= SET_SPTE_WRITE_PROTECTED_PT;
pte_access &= ~ACC_WRITE_MASK;
spte &= ~(PT_WRITABLE_MASK | SPTE_MMU_WRITEABLE);
}
}
if (pte_access & ACC_WRITE_MASK)
spte |= spte_shadow_dirty_mask(spte);
if (speculative)
spte = mark_spte_for_access_track(spte);
out:
*new_spte = spte;
return ret;
}
u64 make_nonleaf_spte(u64 *child_pt, bool ad_disabled)
{
u64 spte;
spte = __pa(child_pt) | shadow_present_mask | PT_WRITABLE_MASK |
shadow_user_mask | shadow_x_mask | shadow_me_mask;
if (ad_disabled)
spte |= SPTE_AD_DISABLED_MASK;
else
spte |= shadow_accessed_mask;
return spte;
}
u64 kvm_mmu_changed_pte_notifier_make_spte(u64 old_spte, kvm_pfn_t new_pfn)
{
u64 new_spte;
new_spte = old_spte & ~PT64_BASE_ADDR_MASK;
new_spte |= (u64)new_pfn << PAGE_SHIFT;
new_spte &= ~PT_WRITABLE_MASK;
new_spte &= ~SPTE_HOST_WRITEABLE;
new_spte = mark_spte_for_access_track(new_spte);
return new_spte;
}
static u8 kvm_get_shadow_phys_bits(void)
{
/*
* boot_cpu_data.x86_phys_bits is reduced when MKTME or SME are detected
* in CPU detection code, but the processor treats those reduced bits as
* 'keyID' thus they are not reserved bits. Therefore KVM needs to look at
* the physical address bits reported by CPUID.
*/
if (likely(boot_cpu_data.extended_cpuid_level >= 0x80000008))
return cpuid_eax(0x80000008) & 0xff;
/*
* Quite weird to have VMX or SVM but not MAXPHYADDR; probably a VM with
* custom CPUID. Proceed with whatever the kernel found since these features
* aren't virtualizable (SME/SEV also require CPUIDs higher than 0x80000008).
*/
return boot_cpu_data.x86_phys_bits;
}
u64 mark_spte_for_access_track(u64 spte)
{
if (spte_ad_enabled(spte))
return spte & ~shadow_accessed_mask;
if (is_access_track_spte(spte))
return spte;
/*
* Making an Access Tracking PTE will result in removal of write access
* from the PTE. So, verify that we will be able to restore the write
* access in the fast page fault path later on.
*/
WARN_ONCE((spte & PT_WRITABLE_MASK) &&
!spte_can_locklessly_be_made_writable(spte),
"kvm: Writable SPTE is not locklessly dirty-trackable\n");
WARN_ONCE(spte & (SHADOW_ACC_TRACK_SAVED_BITS_MASK <<
SHADOW_ACC_TRACK_SAVED_BITS_SHIFT),
"kvm: Access Tracking saved bit locations are not zero\n");
spte |= (spte & SHADOW_ACC_TRACK_SAVED_BITS_MASK) <<
SHADOW_ACC_TRACK_SAVED_BITS_SHIFT;
spte &= ~shadow_acc_track_mask;
return spte;
}
void kvm_mmu_set_mmio_spte_mask(u64 mmio_value, u64 access_mask)
{
BUG_ON((u64)(unsigned)access_mask != access_mask);
WARN_ON(mmio_value & (shadow_nonpresent_or_rsvd_mask << SHADOW_NONPRESENT_OR_RSVD_MASK_LEN));
WARN_ON(mmio_value & shadow_nonpresent_or_rsvd_lower_gfn_mask);
shadow_mmio_value = mmio_value | SPTE_MMIO_MASK;
shadow_mmio_access_mask = access_mask;
}
EXPORT_SYMBOL_GPL(kvm_mmu_set_mmio_spte_mask);
/*
* Sets the shadow PTE masks used by the MMU.
*
* Assumptions:
* - Setting either @accessed_mask or @dirty_mask requires setting both
* - At least one of @accessed_mask or @acc_track_mask must be set
*/
void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
u64 dirty_mask, u64 nx_mask, u64 x_mask, u64 p_mask,
u64 acc_track_mask, u64 me_mask)
{
BUG_ON(!dirty_mask != !accessed_mask);
BUG_ON(!accessed_mask && !acc_track_mask);
BUG_ON(acc_track_mask & SPTE_SPECIAL_MASK);
shadow_user_mask = user_mask;
shadow_accessed_mask = accessed_mask;
shadow_dirty_mask = dirty_mask;
shadow_nx_mask = nx_mask;
shadow_x_mask = x_mask;
shadow_present_mask = p_mask;
shadow_acc_track_mask = acc_track_mask;
shadow_me_mask = me_mask;
}
EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes);
void kvm_mmu_reset_all_pte_masks(void)
{
u8 low_phys_bits;
shadow_user_mask = 0;
shadow_accessed_mask = 0;
shadow_dirty_mask = 0;
shadow_nx_mask = 0;
shadow_x_mask = 0;
shadow_present_mask = 0;
shadow_acc_track_mask = 0;
shadow_phys_bits = kvm_get_shadow_phys_bits();
/*
* If the CPU has 46 or less physical address bits, then set an
* appropriate mask to guard against L1TF attacks. Otherwise, it is
* assumed that the CPU is not vulnerable to L1TF.
*
* Some Intel CPUs address the L1 cache using more PA bits than are
* reported by CPUID. Use the PA width of the L1 cache when possible
* to achieve more effective mitigation, e.g. if system RAM overlaps
* the most significant bits of legal physical address space.
*/
shadow_nonpresent_or_rsvd_mask = 0;
low_phys_bits = boot_cpu_data.x86_phys_bits;
if (boot_cpu_has_bug(X86_BUG_L1TF) &&
!WARN_ON_ONCE(boot_cpu_data.x86_cache_bits >=
52 - SHADOW_NONPRESENT_OR_RSVD_MASK_LEN)) {
low_phys_bits = boot_cpu_data.x86_cache_bits
- SHADOW_NONPRESENT_OR_RSVD_MASK_LEN;
shadow_nonpresent_or_rsvd_mask =
rsvd_bits(low_phys_bits, boot_cpu_data.x86_cache_bits - 1);
}
shadow_nonpresent_or_rsvd_lower_gfn_mask =
GENMASK_ULL(low_phys_bits - 1, PAGE_SHIFT);
}