linux/kernel/power/process.c
Takashi Iwai 4320f6b1d9 PM / sleep: Fix request_firmware() error at resume
The commit [247bc037: PM / Sleep: Mitigate race between the freezer
and request_firmware()] introduced the finer state control, but it
also leads to a new bug; for example, a bug report regarding the
firmware loading of intel BT device at suspend/resume:
  https://bugzilla.novell.com/show_bug.cgi?id=873790

The root cause seems to be a small window between the process resume
and the clear of usermodehelper lock.  The request_firmware() function
checks the UMH lock and gives up when it's in UMH_DISABLE state.  This
is for avoiding the invalid  f/w loading during suspend/resume phase.
The problem is, however, that usermodehelper_enable() is called at the
end of thaw_processes().  Thus, a thawed process in between can kick
off the f/w loader code path (in this case, via btusb_setup_intel())
even before the call of usermodehelper_enable().  Then
usermodehelper_read_trylock() returns an error and request_firmware()
spews WARN_ON() in the end.

This oneliner patch fixes the issue just by setting to UMH_FREEZING
state again before restarting tasks, so that the call of
request_firmware() will be blocked until the end of this function
instead of returning an error.

Fixes: 247bc03742 (PM / Sleep: Mitigate race between the freezer and request_firmware())
Link: https://bugzilla.novell.com/show_bug.cgi?id=873790
Cc: 3.4+ <stable@vger.kernel.org> # 3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-15 14:27:29 +02:00

229 lines
5.1 KiB
C

/*
* drivers/power/process.c - Functions for starting/stopping processes on
* suspend transitions.
*
* Originally from swsusp.
*/
#undef DEBUG
#include <linux/interrupt.h>
#include <linux/oom.h>
#include <linux/suspend.h>
#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/freezer.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/kmod.h>
#include <trace/events/power.h>
/*
* Timeout for stopping processes
*/
unsigned int __read_mostly freeze_timeout_msecs = 20 * MSEC_PER_SEC;
static int try_to_freeze_tasks(bool user_only)
{
struct task_struct *g, *p;
unsigned long end_time;
unsigned int todo;
bool wq_busy = false;
struct timeval start, end;
u64 elapsed_msecs64;
unsigned int elapsed_msecs;
bool wakeup = false;
int sleep_usecs = USEC_PER_MSEC;
do_gettimeofday(&start);
end_time = jiffies + msecs_to_jiffies(freeze_timeout_msecs);
if (!user_only)
freeze_workqueues_begin();
while (true) {
todo = 0;
read_lock(&tasklist_lock);
do_each_thread(g, p) {
if (p == current || !freeze_task(p))
continue;
if (!freezer_should_skip(p))
todo++;
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
if (!user_only) {
wq_busy = freeze_workqueues_busy();
todo += wq_busy;
}
if (!todo || time_after(jiffies, end_time))
break;
if (pm_wakeup_pending()) {
wakeup = true;
break;
}
/*
* We need to retry, but first give the freezing tasks some
* time to enter the refrigerator. Start with an initial
* 1 ms sleep followed by exponential backoff until 8 ms.
*/
usleep_range(sleep_usecs / 2, sleep_usecs);
if (sleep_usecs < 8 * USEC_PER_MSEC)
sleep_usecs *= 2;
}
do_gettimeofday(&end);
elapsed_msecs64 = timeval_to_ns(&end) - timeval_to_ns(&start);
do_div(elapsed_msecs64, NSEC_PER_MSEC);
elapsed_msecs = elapsed_msecs64;
if (todo) {
printk("\n");
printk(KERN_ERR "Freezing of tasks %s after %d.%03d seconds "
"(%d tasks refusing to freeze, wq_busy=%d):\n",
wakeup ? "aborted" : "failed",
elapsed_msecs / 1000, elapsed_msecs % 1000,
todo - wq_busy, wq_busy);
if (!wakeup) {
read_lock(&tasklist_lock);
do_each_thread(g, p) {
if (p != current && !freezer_should_skip(p)
&& freezing(p) && !frozen(p))
sched_show_task(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
}
} else {
printk("(elapsed %d.%03d seconds) ", elapsed_msecs / 1000,
elapsed_msecs % 1000);
}
return todo ? -EBUSY : 0;
}
/**
* freeze_processes - Signal user space processes to enter the refrigerator.
* The current thread will not be frozen. The same process that calls
* freeze_processes must later call thaw_processes.
*
* On success, returns 0. On failure, -errno and system is fully thawed.
*/
int freeze_processes(void)
{
int error;
error = __usermodehelper_disable(UMH_FREEZING);
if (error)
return error;
/* Make sure this task doesn't get frozen */
current->flags |= PF_SUSPEND_TASK;
if (!pm_freezing)
atomic_inc(&system_freezing_cnt);
printk("Freezing user space processes ... ");
pm_freezing = true;
error = try_to_freeze_tasks(true);
if (!error) {
printk("done.");
__usermodehelper_set_disable_depth(UMH_DISABLED);
oom_killer_disable();
}
printk("\n");
BUG_ON(in_atomic());
if (error)
thaw_processes();
return error;
}
/**
* freeze_kernel_threads - Make freezable kernel threads go to the refrigerator.
*
* On success, returns 0. On failure, -errno and only the kernel threads are
* thawed, so as to give a chance to the caller to do additional cleanups
* (if any) before thawing the userspace tasks. So, it is the responsibility
* of the caller to thaw the userspace tasks, when the time is right.
*/
int freeze_kernel_threads(void)
{
int error;
printk("Freezing remaining freezable tasks ... ");
pm_nosig_freezing = true;
error = try_to_freeze_tasks(false);
if (!error)
printk("done.");
printk("\n");
BUG_ON(in_atomic());
if (error)
thaw_kernel_threads();
return error;
}
void thaw_processes(void)
{
struct task_struct *g, *p;
struct task_struct *curr = current;
trace_suspend_resume(TPS("thaw_processes"), 0, true);
if (pm_freezing)
atomic_dec(&system_freezing_cnt);
pm_freezing = false;
pm_nosig_freezing = false;
oom_killer_enable();
printk("Restarting tasks ... ");
__usermodehelper_set_disable_depth(UMH_FREEZING);
thaw_workqueues();
read_lock(&tasklist_lock);
do_each_thread(g, p) {
/* No other threads should have PF_SUSPEND_TASK set */
WARN_ON((p != curr) && (p->flags & PF_SUSPEND_TASK));
__thaw_task(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
WARN_ON(!(curr->flags & PF_SUSPEND_TASK));
curr->flags &= ~PF_SUSPEND_TASK;
usermodehelper_enable();
schedule();
printk("done.\n");
trace_suspend_resume(TPS("thaw_processes"), 0, false);
}
void thaw_kernel_threads(void)
{
struct task_struct *g, *p;
pm_nosig_freezing = false;
printk("Restarting kernel threads ... ");
thaw_workqueues();
read_lock(&tasklist_lock);
do_each_thread(g, p) {
if (p->flags & (PF_KTHREAD | PF_WQ_WORKER))
__thaw_task(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
schedule();
printk("done.\n");
}