mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
d8a66f3621
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
266 lines
5.9 KiB
C
266 lines
5.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin
|
|
*
|
|
* Copyright 2015-2019 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* Command Byte Operations */
|
|
#define ADM1177_CMD_V_CONT BIT(0)
|
|
#define ADM1177_CMD_I_CONT BIT(2)
|
|
#define ADM1177_CMD_VRANGE BIT(4)
|
|
|
|
/* Extended Register */
|
|
#define ADM1177_REG_ALERT_TH 2
|
|
|
|
#define ADM1177_BITS 12
|
|
|
|
/**
|
|
* struct adm1177_state - driver instance specific data
|
|
* @client: pointer to i2c client
|
|
* @r_sense_uohm: current sense resistor value
|
|
* @alert_threshold_ua: current limit for shutdown
|
|
* @vrange_high: internal voltage divider
|
|
*/
|
|
struct adm1177_state {
|
|
struct i2c_client *client;
|
|
u32 r_sense_uohm;
|
|
u32 alert_threshold_ua;
|
|
bool vrange_high;
|
|
};
|
|
|
|
static int adm1177_read_raw(struct adm1177_state *st, u8 num, u8 *data)
|
|
{
|
|
return i2c_master_recv(st->client, data, num);
|
|
}
|
|
|
|
static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd)
|
|
{
|
|
return i2c_smbus_write_byte(st->client, cmd);
|
|
}
|
|
|
|
static int adm1177_write_alert_thr(struct adm1177_state *st,
|
|
u32 alert_threshold_ua)
|
|
{
|
|
u64 val;
|
|
int ret;
|
|
|
|
val = 0xFFULL * alert_threshold_ua * st->r_sense_uohm;
|
|
val = div_u64(val, 105840000U);
|
|
val = div_u64(val, 1000U);
|
|
if (val > 0xFF)
|
|
val = 0xFF;
|
|
|
|
ret = i2c_smbus_write_byte_data(st->client, ADM1177_REG_ALERT_TH,
|
|
val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
st->alert_threshold_ua = alert_threshold_ua;
|
|
return 0;
|
|
}
|
|
|
|
static int adm1177_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct adm1177_state *st = dev_get_drvdata(dev);
|
|
u8 data[3];
|
|
long dummy;
|
|
int ret;
|
|
|
|
switch (type) {
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
ret = adm1177_read_raw(st, 3, data);
|
|
if (ret < 0)
|
|
return ret;
|
|
dummy = (data[1] << 4) | (data[2] & 0xF);
|
|
/*
|
|
* convert to milliamperes
|
|
* ((105.84mV / 4096) x raw) / senseResistor(ohm)
|
|
*/
|
|
*val = div_u64((105840000ull * dummy),
|
|
4096 * st->r_sense_uohm);
|
|
return 0;
|
|
case hwmon_curr_max_alarm:
|
|
*val = st->alert_threshold_ua;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
case hwmon_in:
|
|
ret = adm1177_read_raw(st, 3, data);
|
|
if (ret < 0)
|
|
return ret;
|
|
dummy = (data[0] << 4) | (data[2] >> 4);
|
|
/*
|
|
* convert to millivolts based on resistor devision
|
|
* (V_fullscale / 4096) * raw
|
|
*/
|
|
if (st->vrange_high)
|
|
dummy *= 26350;
|
|
else
|
|
dummy *= 6650;
|
|
|
|
*val = DIV_ROUND_CLOSEST(dummy, 4096);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int adm1177_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
struct adm1177_state *st = dev_get_drvdata(dev);
|
|
|
|
switch (type) {
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_max_alarm:
|
|
adm1177_write_alert_thr(st, val);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t adm1177_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
const struct adm1177_state *st = data;
|
|
|
|
switch (type) {
|
|
case hwmon_in:
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
return 0444;
|
|
}
|
|
break;
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
if (st->r_sense_uohm)
|
|
return 0444;
|
|
return 0;
|
|
case hwmon_curr_max_alarm:
|
|
if (st->r_sense_uohm)
|
|
return 0644;
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct hwmon_channel_info * const adm1177_info[] = {
|
|
HWMON_CHANNEL_INFO(curr,
|
|
HWMON_C_INPUT | HWMON_C_MAX_ALARM),
|
|
HWMON_CHANNEL_INFO(in,
|
|
HWMON_I_INPUT),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops adm1177_hwmon_ops = {
|
|
.is_visible = adm1177_is_visible,
|
|
.read = adm1177_read,
|
|
.write = adm1177_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info adm1177_chip_info = {
|
|
.ops = &adm1177_hwmon_ops,
|
|
.info = adm1177_info,
|
|
};
|
|
|
|
static int adm1177_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct adm1177_state *st;
|
|
u32 alert_threshold_ua;
|
|
int ret;
|
|
|
|
st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
|
|
if (!st)
|
|
return -ENOMEM;
|
|
|
|
st->client = client;
|
|
|
|
ret = devm_regulator_get_enable_optional(&client->dev, "vref");
|
|
if (ret == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
if (device_property_read_u32(dev, "shunt-resistor-micro-ohms",
|
|
&st->r_sense_uohm))
|
|
st->r_sense_uohm = 0;
|
|
if (device_property_read_u32(dev, "adi,shutdown-threshold-microamp",
|
|
&alert_threshold_ua)) {
|
|
if (st->r_sense_uohm)
|
|
/*
|
|
* set maximum default value from datasheet based on
|
|
* shunt-resistor
|
|
*/
|
|
alert_threshold_ua = div_u64(105840000000,
|
|
st->r_sense_uohm);
|
|
else
|
|
alert_threshold_ua = 0;
|
|
}
|
|
st->vrange_high = device_property_read_bool(dev,
|
|
"adi,vrange-high-enable");
|
|
if (alert_threshold_ua && st->r_sense_uohm)
|
|
adm1177_write_alert_thr(st, alert_threshold_ua);
|
|
|
|
ret = adm1177_write_cmd(st, ADM1177_CMD_V_CONT |
|
|
ADM1177_CMD_I_CONT |
|
|
(st->vrange_high ? 0 : ADM1177_CMD_VRANGE));
|
|
if (ret)
|
|
return ret;
|
|
|
|
hwmon_dev =
|
|
devm_hwmon_device_register_with_info(dev, client->name, st,
|
|
&adm1177_chip_info, NULL);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id adm1177_id[] = {
|
|
{"adm1177"},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adm1177_id);
|
|
|
|
static const struct of_device_id adm1177_dt_ids[] = {
|
|
{ .compatible = "adi,adm1177" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adm1177_dt_ids);
|
|
|
|
static struct i2c_driver adm1177_driver = {
|
|
.driver = {
|
|
.name = "adm1177",
|
|
.of_match_table = adm1177_dt_ids,
|
|
},
|
|
.probe = adm1177_probe,
|
|
.id_table = adm1177_id,
|
|
};
|
|
module_i2c_driver(adm1177_driver);
|
|
|
|
MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|