linux/drivers/net/wireless/ath/wil6210/netdev.c
Kirshenbaum Erez 504937d493 wil6210: Enable TCP/UDP checksum HW offload
Add support for TCP and UDP HW checksum offloading.
RX chain is allways configured for offload mode.
In case of checksum error in RX path the DMA L4 error bit(5)
will be set to 1 and driver will drop the packet.
TX checksum offloading is configrable (ethtool -K).
TX descriptors are configured for checksum offload according
to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop
the TX packet (checksum required but not TCP/UDP IPV4/6 type).

Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22 16:54:44 -04:00

186 lines
4.3 KiB
C

/*
* Copyright (c) 2012 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/etherdevice.h>
#include "wil6210.h"
static int wil_open(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
return wil_up(wil);
}
static int wil_stop(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
return wil_down(wil);
}
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
.ndo_start_xmit = wil_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)
{
struct wil6210_priv *wil = container_of(napi, struct wil6210_priv,
napi_rx);
int quota = budget;
int done;
wil_rx_handle(wil, &quota);
done = budget - quota;
if (done <= 1) { /* burst ends - only one packet processed */
napi_complete(napi);
wil6210_unmask_irq_rx(wil);
wil_dbg_txrx(wil, "NAPI RX complete\n");
}
wil_dbg_txrx(wil, "NAPI RX poll(%d) done %d\n", budget, done);
return done;
}
static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
{
struct wil6210_priv *wil = container_of(napi, struct wil6210_priv,
napi_tx);
int tx_done = 0;
uint i;
/* always process ALL Tx complete, regardless budget - it is fast */
for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
struct vring *vring = &wil->vring_tx[i];
if (!vring->va)
continue;
tx_done += wil_tx_complete(wil, i);
}
if (tx_done <= 1) { /* burst ends - only one packet processed */
napi_complete(napi);
wil6210_unmask_irq_tx(wil);
wil_dbg_txrx(wil, "NAPI TX complete\n");
}
wil_dbg_txrx(wil, "NAPI TX poll(%d) done %d\n", budget, tx_done);
return min(tx_done, budget);
}
void *wil_if_alloc(struct device *dev, void __iomem *csr)
{
struct net_device *ndev;
struct wireless_dev *wdev;
struct wil6210_priv *wil;
struct ieee80211_channel *ch;
int rc = 0;
wdev = wil_cfg80211_init(dev);
if (IS_ERR(wdev)) {
dev_err(dev, "wil_cfg80211_init failed\n");
return wdev;
}
wil = wdev_to_wil(wdev);
wil->csr = csr;
wil->wdev = wdev;
rc = wil_priv_init(wil);
if (rc) {
dev_err(dev, "wil_priv_init failed\n");
goto out_wdev;
}
wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
/* default monitor channel */
ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
ndev = alloc_netdev(0, "wlan%d", ether_setup);
if (!ndev) {
dev_err(dev, "alloc_netdev_mqs failed\n");
rc = -ENOMEM;
goto out_priv;
}
ndev->netdev_ops = &wil_netdev_ops;
ndev->ieee80211_ptr = wdev;
ndev->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
ndev->features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
wdev->netdev = ndev;
netif_napi_add(ndev, &wil->napi_rx, wil6210_netdev_poll_rx,
WIL6210_NAPI_BUDGET);
netif_napi_add(ndev, &wil->napi_tx, wil6210_netdev_poll_tx,
WIL6210_NAPI_BUDGET);
wil_link_off(wil);
return wil;
out_priv:
wil_priv_deinit(wil);
out_wdev:
wil_wdev_free(wil);
return ERR_PTR(rc);
}
void wil_if_free(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
if (!ndev)
return;
free_netdev(ndev);
wil_priv_deinit(wil);
wil_wdev_free(wil);
}
int wil_if_add(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
int rc;
rc = register_netdev(ndev);
if (rc < 0) {
dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
return rc;
}
wil_link_off(wil);
return 0;
}
void wil_if_remove(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
unregister_netdev(ndev);
}