mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-13 05:54:23 +08:00
c2d5f273c5
Adds support for reading the critical values of the temperature sensors and the rail sensors (voltage and current) once and caches them. Updates the naming of the constants following a more clear scheme. Also updates the documentation and fixes some typos. Updates is_visible and ops_read functions to be more readable. The new sensors output of a Corsair HX850i will look like this: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.14 V (crit min = +8.41 V, crit max = +15.59 V) v_out +5v: 5.03 V (crit min = +3.50 V, crit max = +6.50 V) v_out +3.3v: 3.30 V (crit min = +2.31 V, crit max = +4.30 V) psu fan: 0 RPM vrm temp: +46.2°C (crit = +70.0°C) case temp: +39.8°C (crit = +70.0°C) power total: 152.00 W power +12v: 108.00 W power +5v: 41.00 W power +3.3v: 5.00 W curr +12v: 9.00 A (crit max = +85.00 A) curr +5v: 8.31 A (crit max = +40.00 A) curr +3.3v: 1.62 A (crit max = +40.00 A) Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YFNg6vGk3sQmyqgB@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
94 lines
2.8 KiB
ReStructuredText
94 lines
2.8 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
Kernel driver corsair-psu
|
|
=========================
|
|
|
|
Supported devices:
|
|
|
|
* Corsair Power Supplies
|
|
|
|
Corsair HX550i
|
|
|
|
Corsair HX650i
|
|
|
|
Corsair HX750i
|
|
|
|
Corsair HX850i
|
|
|
|
Corsair HX1000i
|
|
|
|
Corsair HX1200i
|
|
|
|
Corsair RM550i
|
|
|
|
Corsair RM650i
|
|
|
|
Corsair RM750i
|
|
|
|
Corsair RM850i
|
|
|
|
Corsair RM1000i
|
|
|
|
Author: Wilken Gottwalt
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements the sysfs interface for the Corsair PSUs with a HID protocol
|
|
interface of the HXi and RMi series.
|
|
These power supplies provide access to a micro-controller with 2 attached
|
|
temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for
|
|
power usage and 4 sensors for current levels and addtional non-sensor information
|
|
like uptimes.
|
|
|
|
Sysfs entries
|
|
-------------
|
|
|
|
======================= ========================================================
|
|
curr1_input Total current usage
|
|
curr2_input Current on the 12v psu rail
|
|
curr2_crit Current max critical value on the 12v psu rail
|
|
curr3_input Current on the 5v psu rail
|
|
curr3_crit Current max critical value on the 5v psu rail
|
|
curr4_input Current on the 3.3v psu rail
|
|
curr4_crit Current max critical value on the 3.3v psu rail
|
|
fan1_input RPM of psu fan
|
|
in0_input Voltage of the psu ac input
|
|
in1_input Voltage of the 12v psu rail
|
|
in1_crit Voltage max critical value on the 12v psu rail
|
|
in1_lcrit Voltage min critical value on the 12v psu rail
|
|
in2_input Voltage of the 5v psu rail
|
|
in2_crit Voltage max critical value on the 5v psu rail
|
|
in2_lcrit Voltage min critical value on the 5v psu rail
|
|
in3_input Voltage of the 3.3v psu rail
|
|
in3_crit Voltage max critical value on the 3.3v psu rail
|
|
in3_lcrit Voltage min critical value on the 3.3v psu rail
|
|
power1_input Total power usage
|
|
power2_input Power usage of the 12v psu rail
|
|
power3_input Power usage of the 5v psu rail
|
|
power4_input Power usage of the 3.3v psu rail
|
|
temp1_input Temperature of the psu vrm component
|
|
temp1_crit Temperature max cirtical value of the psu vrm component
|
|
temp2_input Temperature of the psu case
|
|
temp2_crit Temperature max critical value of psu case
|
|
======================= ========================================================
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
It is an USB HID device, so it is auto-detected and supports hot-swapping.
|
|
|
|
Flickering values in the rail voltage levels can be an indicator for a failing
|
|
PSU. The driver also provides some additional useful values via debugfs, which
|
|
do not fit into the hwmon class.
|
|
|
|
Debugfs entries
|
|
---------------
|
|
|
|
======================= ========================================================
|
|
uptime Current uptime of the psu
|
|
uptime_total Total uptime of the psu
|
|
vendor Vendor name of the psu
|
|
product Product name of the psu
|
|
======================= ========================================================
|