linux/drivers/media/i2c/vp27smpx.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

191 lines
4.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* vp27smpx - driver version 0.0.1
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
*
* Based on a tvaudio patch from Takahiro Adachi <tadachi@tadachi-net.com>
* and Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/ioctl.h>
#include <linux/uaccess.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
MODULE_DESCRIPTION("vp27smpx driver");
MODULE_AUTHOR("Hans Verkuil");
MODULE_LICENSE("GPL");
/* ----------------------------------------------------------------------- */
struct vp27smpx_state {
struct v4l2_subdev sd;
int radio;
u32 audmode;
};
static inline struct vp27smpx_state *to_state(struct v4l2_subdev *sd)
{
return container_of(sd, struct vp27smpx_state, sd);
}
static void vp27smpx_set_audmode(struct v4l2_subdev *sd, u32 audmode)
{
struct vp27smpx_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
u8 data[3] = { 0x00, 0x00, 0x04 };
switch (audmode) {
case V4L2_TUNER_MODE_MONO:
case V4L2_TUNER_MODE_LANG1:
break;
case V4L2_TUNER_MODE_STEREO:
case V4L2_TUNER_MODE_LANG1_LANG2:
data[1] = 0x01;
break;
case V4L2_TUNER_MODE_LANG2:
data[1] = 0x02;
break;
}
if (i2c_master_send(client, data, sizeof(data)) != sizeof(data))
v4l2_err(sd, "I/O error setting audmode\n");
else
state->audmode = audmode;
}
static int vp27smpx_s_radio(struct v4l2_subdev *sd)
{
struct vp27smpx_state *state = to_state(sd);
state->radio = 1;
return 0;
}
static int vp27smpx_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
{
struct vp27smpx_state *state = to_state(sd);
state->radio = 0;
return 0;
}
static int vp27smpx_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
{
struct vp27smpx_state *state = to_state(sd);
if (!state->radio)
vp27smpx_set_audmode(sd, vt->audmode);
return 0;
}
static int vp27smpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
struct vp27smpx_state *state = to_state(sd);
if (state->radio)
return 0;
vt->audmode = state->audmode;
vt->capability = V4L2_TUNER_CAP_STEREO |
V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
vt->rxsubchans = V4L2_TUNER_SUB_MONO;
return 0;
}
static int vp27smpx_log_status(struct v4l2_subdev *sd)
{
struct vp27smpx_state *state = to_state(sd);
v4l2_info(sd, "Audio Mode: %u%s\n", state->audmode,
state->radio ? " (Radio)" : "");
return 0;
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops vp27smpx_core_ops = {
.log_status = vp27smpx_log_status,
};
static const struct v4l2_subdev_tuner_ops vp27smpx_tuner_ops = {
.s_radio = vp27smpx_s_radio,
.s_tuner = vp27smpx_s_tuner,
.g_tuner = vp27smpx_g_tuner,
};
static const struct v4l2_subdev_video_ops vp27smpx_video_ops = {
.s_std = vp27smpx_s_std,
};
static const struct v4l2_subdev_ops vp27smpx_ops = {
.core = &vp27smpx_core_ops,
.tuner = &vp27smpx_tuner_ops,
.video = &vp27smpx_video_ops,
};
/* ----------------------------------------------------------------------- */
/* i2c implementation */
/*
* Generic i2c probe
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
static int vp27smpx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct vp27smpx_state *state;
struct v4l2_subdev *sd;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &vp27smpx_ops);
state->audmode = V4L2_TUNER_MODE_STEREO;
/* initialize vp27smpx */
vp27smpx_set_audmode(sd, state->audmode);
return 0;
}
static void vp27smpx_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
}
/* ----------------------------------------------------------------------- */
static const struct i2c_device_id vp27smpx_id[] = {
{ "vp27smpx", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, vp27smpx_id);
static struct i2c_driver vp27smpx_driver = {
.driver = {
.name = "vp27smpx",
},
.probe = vp27smpx_probe,
.remove = vp27smpx_remove,
.id_table = vp27smpx_id,
};
module_i2c_driver(vp27smpx_driver);