mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 02:54:32 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
386 lines
9.3 KiB
C
386 lines
9.3 KiB
C
/*
|
|
* ths7303/53- THS7303/53 Video Amplifier driver
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Copyright 2013 Cisco Systems, Inc. and/or its affiliates.
|
|
*
|
|
* Author: Chaithrika U S <chaithrika@ti.com>
|
|
*
|
|
* Contributors:
|
|
* Hans Verkuil <hans.verkuil@cisco.com>
|
|
* Lad, Prabhakar <prabhakar.lad@ti.com>
|
|
* Martin Bugge <marbugge@cisco.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed .as is. WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/i2c/ths7303.h>
|
|
#include <media/v4l2-device.h>
|
|
|
|
#define THS7303_CHANNEL_1 1
|
|
#define THS7303_CHANNEL_2 2
|
|
#define THS7303_CHANNEL_3 3
|
|
|
|
struct ths7303_state {
|
|
struct v4l2_subdev sd;
|
|
const struct ths7303_platform_data *pdata;
|
|
struct v4l2_bt_timings bt;
|
|
int std_id;
|
|
int stream_on;
|
|
};
|
|
|
|
enum ths7303_filter_mode {
|
|
THS7303_FILTER_MODE_480I_576I,
|
|
THS7303_FILTER_MODE_480P_576P,
|
|
THS7303_FILTER_MODE_720P_1080I,
|
|
THS7303_FILTER_MODE_1080P,
|
|
THS7303_FILTER_MODE_DISABLE
|
|
};
|
|
|
|
MODULE_DESCRIPTION("TI THS7303 video amplifier driver");
|
|
MODULE_AUTHOR("Chaithrika U S");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static inline struct ths7303_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct ths7303_state, sd);
|
|
}
|
|
|
|
static int ths7303_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
static int ths7303_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
ret = i2c_smbus_write_byte_data(client, reg, val);
|
|
if (ret == 0)
|
|
return 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* following function is used to set ths7303 */
|
|
static int ths7303_setval(struct v4l2_subdev *sd,
|
|
enum ths7303_filter_mode mode)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct ths7303_state *state = to_state(sd);
|
|
const struct ths7303_platform_data *pdata = state->pdata;
|
|
u8 val, sel = 0;
|
|
int err, disable = 0;
|
|
|
|
if (!client)
|
|
return -EINVAL;
|
|
|
|
switch (mode) {
|
|
case THS7303_FILTER_MODE_1080P:
|
|
sel = 0x3; /*1080p and SXGA/UXGA */
|
|
break;
|
|
case THS7303_FILTER_MODE_720P_1080I:
|
|
sel = 0x2; /*720p, 1080i and SVGA/XGA */
|
|
break;
|
|
case THS7303_FILTER_MODE_480P_576P:
|
|
sel = 0x1; /* EDTV 480p/576p and VGA */
|
|
break;
|
|
case THS7303_FILTER_MODE_480I_576I:
|
|
sel = 0x0; /* SDTV, S-Video, 480i/576i */
|
|
break;
|
|
default:
|
|
/* disable all channels */
|
|
disable = 1;
|
|
}
|
|
|
|
val = (sel << 6) | (sel << 3);
|
|
if (!disable)
|
|
val |= (pdata->ch_1 & 0x27);
|
|
err = ths7303_write(sd, THS7303_CHANNEL_1, val);
|
|
if (err)
|
|
goto out;
|
|
|
|
val = (sel << 6) | (sel << 3);
|
|
if (!disable)
|
|
val |= (pdata->ch_2 & 0x27);
|
|
err = ths7303_write(sd, THS7303_CHANNEL_2, val);
|
|
if (err)
|
|
goto out;
|
|
|
|
val = (sel << 6) | (sel << 3);
|
|
if (!disable)
|
|
val |= (pdata->ch_3 & 0x27);
|
|
err = ths7303_write(sd, THS7303_CHANNEL_3, val);
|
|
if (err)
|
|
goto out;
|
|
|
|
return 0;
|
|
out:
|
|
pr_info("write byte data failed\n");
|
|
return err;
|
|
}
|
|
|
|
static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
|
|
{
|
|
struct ths7303_state *state = to_state(sd);
|
|
|
|
if (norm & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) {
|
|
state->std_id = 1;
|
|
state->bt.pixelclock = 0;
|
|
return ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I);
|
|
}
|
|
|
|
return ths7303_setval(sd, THS7303_FILTER_MODE_DISABLE);
|
|
}
|
|
|
|
static int ths7303_config(struct v4l2_subdev *sd)
|
|
{
|
|
struct ths7303_state *state = to_state(sd);
|
|
int res;
|
|
|
|
if (!state->stream_on) {
|
|
ths7303_write(sd, THS7303_CHANNEL_1,
|
|
(ths7303_read(sd, THS7303_CHANNEL_1) & 0xf8) |
|
|
0x00);
|
|
ths7303_write(sd, THS7303_CHANNEL_2,
|
|
(ths7303_read(sd, THS7303_CHANNEL_2) & 0xf8) |
|
|
0x00);
|
|
ths7303_write(sd, THS7303_CHANNEL_3,
|
|
(ths7303_read(sd, THS7303_CHANNEL_3) & 0xf8) |
|
|
0x00);
|
|
return 0;
|
|
}
|
|
|
|
if (state->bt.pixelclock > 120000000)
|
|
res = ths7303_setval(sd, THS7303_FILTER_MODE_1080P);
|
|
else if (state->bt.pixelclock > 70000000)
|
|
res = ths7303_setval(sd, THS7303_FILTER_MODE_720P_1080I);
|
|
else if (state->bt.pixelclock > 20000000)
|
|
res = ths7303_setval(sd, THS7303_FILTER_MODE_480P_576P);
|
|
else if (state->std_id)
|
|
res = ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I);
|
|
else
|
|
/* disable all channels */
|
|
res = ths7303_setval(sd, THS7303_FILTER_MODE_DISABLE);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
static int ths7303_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct ths7303_state *state = to_state(sd);
|
|
|
|
state->stream_on = enable;
|
|
|
|
return ths7303_config(sd);
|
|
}
|
|
|
|
/* for setting filter for HD output */
|
|
static int ths7303_s_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *dv_timings)
|
|
{
|
|
struct ths7303_state *state = to_state(sd);
|
|
|
|
if (!dv_timings || dv_timings->type != V4L2_DV_BT_656_1120)
|
|
return -EINVAL;
|
|
|
|
state->bt = dv_timings->bt;
|
|
state->std_id = 0;
|
|
|
|
return ths7303_config(sd);
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops ths7303_video_ops = {
|
|
.s_stream = ths7303_s_stream,
|
|
.s_std_output = ths7303_s_std_output,
|
|
.s_dv_timings = ths7303_s_dv_timings,
|
|
};
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
|
|
static int ths7303_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
reg->size = 1;
|
|
reg->val = ths7303_read(sd, reg->reg);
|
|
return 0;
|
|
}
|
|
|
|
static int ths7303_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
ths7303_write(sd, reg->reg, reg->val);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const char * const stc_lpf_sel_txt[4] = {
|
|
"500-kHz Filter",
|
|
"2.5-MHz Filter",
|
|
"5-MHz Filter",
|
|
"5-MHz Filter",
|
|
};
|
|
|
|
static const char * const in_mux_sel_txt[2] = {
|
|
"Input A Select",
|
|
"Input B Select",
|
|
};
|
|
|
|
static const char * const lpf_freq_sel_txt[4] = {
|
|
"9-MHz LPF",
|
|
"16-MHz LPF",
|
|
"35-MHz LPF",
|
|
"Bypass LPF",
|
|
};
|
|
|
|
static const char * const in_bias_sel_dis_cont_txt[8] = {
|
|
"Disable Channel",
|
|
"Mute Function - No Output",
|
|
"DC Bias Select",
|
|
"DC Bias + 250 mV Offset Select",
|
|
"AC Bias Select",
|
|
"Sync Tip Clamp with low bias",
|
|
"Sync Tip Clamp with mid bias",
|
|
"Sync Tip Clamp with high bias",
|
|
};
|
|
|
|
static void ths7303_log_channel_status(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
u8 val = ths7303_read(sd, reg);
|
|
|
|
if ((val & 0x7) == 0) {
|
|
v4l2_info(sd, "Channel %d Off\n", reg);
|
|
return;
|
|
}
|
|
|
|
v4l2_info(sd, "Channel %d On\n", reg);
|
|
v4l2_info(sd, " value 0x%x\n", val);
|
|
v4l2_info(sd, " %s\n", stc_lpf_sel_txt[(val >> 6) & 0x3]);
|
|
v4l2_info(sd, " %s\n", in_mux_sel_txt[(val >> 5) & 0x1]);
|
|
v4l2_info(sd, " %s\n", lpf_freq_sel_txt[(val >> 3) & 0x3]);
|
|
v4l2_info(sd, " %s\n", in_bias_sel_dis_cont_txt[(val >> 0) & 0x7]);
|
|
}
|
|
|
|
static int ths7303_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct ths7303_state *state = to_state(sd);
|
|
|
|
v4l2_info(sd, "stream %s\n", state->stream_on ? "On" : "Off");
|
|
|
|
if (state->bt.pixelclock) {
|
|
struct v4l2_bt_timings *bt = &state->bt;
|
|
u32 frame_width, frame_height;
|
|
|
|
frame_width = V4L2_DV_BT_FRAME_WIDTH(bt);
|
|
frame_height = V4L2_DV_BT_FRAME_HEIGHT(bt);
|
|
v4l2_info(sd,
|
|
"timings: %dx%d%s%d (%dx%d). Pix freq. = %d Hz. Polarities = 0x%x\n",
|
|
bt->width, bt->height, bt->interlaced ? "i" : "p",
|
|
(frame_height * frame_width) > 0 ?
|
|
(int)bt->pixelclock /
|
|
(frame_height * frame_width) : 0,
|
|
frame_width, frame_height,
|
|
(int)bt->pixelclock, bt->polarities);
|
|
} else {
|
|
v4l2_info(sd, "no timings set\n");
|
|
}
|
|
|
|
ths7303_log_channel_status(sd, THS7303_CHANNEL_1);
|
|
ths7303_log_channel_status(sd, THS7303_CHANNEL_2);
|
|
ths7303_log_channel_status(sd, THS7303_CHANNEL_3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops ths7303_core_ops = {
|
|
.log_status = ths7303_log_status,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = ths7303_g_register,
|
|
.s_register = ths7303_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops ths7303_ops = {
|
|
.core = &ths7303_core_ops,
|
|
.video = &ths7303_video_ops,
|
|
};
|
|
|
|
static int ths7303_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ths7303_platform_data *pdata = client->dev.platform_data;
|
|
struct ths7303_state *state;
|
|
struct v4l2_subdev *sd;
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&client->dev, "No platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
v4l_info(client, "chip found @ 0x%x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(struct ths7303_state),
|
|
GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->pdata = pdata;
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &ths7303_ops);
|
|
|
|
/* set to default 480I_576I filter mode */
|
|
if (ths7303_setval(sd, THS7303_FILTER_MODE_480I_576I) < 0) {
|
|
v4l_err(client, "Setting to 480I_576I filter mode failed!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ths7303_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
}
|
|
|
|
static const struct i2c_device_id ths7303_id[] = {
|
|
{"ths7303", 0},
|
|
{"ths7353", 0},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, ths7303_id);
|
|
|
|
static struct i2c_driver ths7303_driver = {
|
|
.driver = {
|
|
.name = "ths73x3",
|
|
},
|
|
.probe = ths7303_probe,
|
|
.remove = ths7303_remove,
|
|
.id_table = ths7303_id,
|
|
};
|
|
|
|
module_i2c_driver(ths7303_driver);
|