mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 02:54:32 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
464 lines
11 KiB
C
464 lines
11 KiB
C
/*
|
|
* adv7393 - ADV7393 Video Encoder Driver
|
|
*
|
|
* The encoder hardware does not support SECAM.
|
|
*
|
|
* Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/
|
|
* Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
|
|
*
|
|
* Based on ADV7343 driver,
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed .as is. WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <media/i2c/adv7393.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
#include "adv7393_regs.h"
|
|
|
|
MODULE_DESCRIPTION("ADV7393 video encoder driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static bool debug;
|
|
module_param(debug, bool, 0644);
|
|
MODULE_PARM_DESC(debug, "Debug level 0-1");
|
|
|
|
struct adv7393_state {
|
|
struct v4l2_subdev sd;
|
|
struct v4l2_ctrl_handler hdl;
|
|
u8 reg00;
|
|
u8 reg01;
|
|
u8 reg02;
|
|
u8 reg35;
|
|
u8 reg80;
|
|
u8 reg82;
|
|
u32 output;
|
|
v4l2_std_id std;
|
|
};
|
|
|
|
static inline struct adv7393_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct adv7393_state, sd);
|
|
}
|
|
|
|
static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return &container_of(ctrl->handler, struct adv7393_state, hdl)->sd;
|
|
}
|
|
|
|
static inline int adv7393_write(struct v4l2_subdev *sd, u8 reg, u8 value)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
static const u8 adv7393_init_reg_val[] = {
|
|
ADV7393_SOFT_RESET, ADV7393_SOFT_RESET_DEFAULT,
|
|
ADV7393_POWER_MODE_REG, ADV7393_POWER_MODE_REG_DEFAULT,
|
|
|
|
ADV7393_HD_MODE_REG1, ADV7393_HD_MODE_REG1_DEFAULT,
|
|
ADV7393_HD_MODE_REG2, ADV7393_HD_MODE_REG2_DEFAULT,
|
|
ADV7393_HD_MODE_REG3, ADV7393_HD_MODE_REG3_DEFAULT,
|
|
ADV7393_HD_MODE_REG4, ADV7393_HD_MODE_REG4_DEFAULT,
|
|
ADV7393_HD_MODE_REG5, ADV7393_HD_MODE_REG5_DEFAULT,
|
|
ADV7393_HD_MODE_REG6, ADV7393_HD_MODE_REG6_DEFAULT,
|
|
ADV7393_HD_MODE_REG7, ADV7393_HD_MODE_REG7_DEFAULT,
|
|
|
|
ADV7393_SD_MODE_REG1, ADV7393_SD_MODE_REG1_DEFAULT,
|
|
ADV7393_SD_MODE_REG2, ADV7393_SD_MODE_REG2_DEFAULT,
|
|
ADV7393_SD_MODE_REG3, ADV7393_SD_MODE_REG3_DEFAULT,
|
|
ADV7393_SD_MODE_REG4, ADV7393_SD_MODE_REG4_DEFAULT,
|
|
ADV7393_SD_MODE_REG5, ADV7393_SD_MODE_REG5_DEFAULT,
|
|
ADV7393_SD_MODE_REG6, ADV7393_SD_MODE_REG6_DEFAULT,
|
|
ADV7393_SD_MODE_REG7, ADV7393_SD_MODE_REG7_DEFAULT,
|
|
ADV7393_SD_MODE_REG8, ADV7393_SD_MODE_REG8_DEFAULT,
|
|
|
|
ADV7393_SD_TIMING_REG0, ADV7393_SD_TIMING_REG0_DEFAULT,
|
|
|
|
ADV7393_SD_HUE_ADJUST, ADV7393_SD_HUE_ADJUST_DEFAULT,
|
|
ADV7393_SD_CGMS_WSS0, ADV7393_SD_CGMS_WSS0_DEFAULT,
|
|
ADV7393_SD_BRIGHTNESS_WSS, ADV7393_SD_BRIGHTNESS_WSS_DEFAULT,
|
|
};
|
|
|
|
/*
|
|
* 2^32
|
|
* FSC(reg) = FSC (HZ) * --------
|
|
* 27000000
|
|
*/
|
|
static const struct adv7393_std_info stdinfo[] = {
|
|
{
|
|
/* FSC(Hz) = 4,433,618.75 Hz */
|
|
SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443,
|
|
}, {
|
|
/* FSC(Hz) = 3,579,545.45 Hz */
|
|
SD_STD_NTSC, 569408542, V4L2_STD_NTSC,
|
|
}, {
|
|
/* FSC(Hz) = 3,575,611.00 Hz */
|
|
SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M,
|
|
}, {
|
|
/* FSC(Hz) = 3,582,056.00 Hz */
|
|
SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc,
|
|
}, {
|
|
/* FSC(Hz) = 4,433,618.75 Hz */
|
|
SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N,
|
|
}, {
|
|
/* FSC(Hz) = 4,433,618.75 Hz */
|
|
SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60,
|
|
}, {
|
|
/* FSC(Hz) = 4,433,618.75 Hz */
|
|
SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL,
|
|
},
|
|
};
|
|
|
|
static int adv7393_setstd(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
{
|
|
struct adv7393_state *state = to_state(sd);
|
|
const struct adv7393_std_info *std_info;
|
|
int num_std;
|
|
u8 reg;
|
|
u32 val;
|
|
int err = 0;
|
|
int i;
|
|
|
|
num_std = ARRAY_SIZE(stdinfo);
|
|
|
|
for (i = 0; i < num_std; i++) {
|
|
if (stdinfo[i].stdid & std)
|
|
break;
|
|
}
|
|
|
|
if (i == num_std) {
|
|
v4l2_dbg(1, debug, sd,
|
|
"Invalid std or std is not supported: %llx\n",
|
|
(unsigned long long)std);
|
|
return -EINVAL;
|
|
}
|
|
|
|
std_info = &stdinfo[i];
|
|
|
|
/* Set the standard */
|
|
val = state->reg80 & ~SD_STD_MASK;
|
|
val |= std_info->standard_val3;
|
|
err = adv7393_write(sd, ADV7393_SD_MODE_REG1, val);
|
|
if (err < 0)
|
|
goto setstd_exit;
|
|
|
|
state->reg80 = val;
|
|
|
|
/* Configure the input mode register */
|
|
val = state->reg01 & ~INPUT_MODE_MASK;
|
|
val |= SD_INPUT_MODE;
|
|
err = adv7393_write(sd, ADV7393_MODE_SELECT_REG, val);
|
|
if (err < 0)
|
|
goto setstd_exit;
|
|
|
|
state->reg01 = val;
|
|
|
|
/* Program the sub carrier frequency registers */
|
|
val = std_info->fsc_val;
|
|
for (reg = ADV7393_FSC_REG0; reg <= ADV7393_FSC_REG3; reg++) {
|
|
err = adv7393_write(sd, reg, val);
|
|
if (err < 0)
|
|
goto setstd_exit;
|
|
val >>= 8;
|
|
}
|
|
|
|
val = state->reg82;
|
|
|
|
/* Pedestal settings */
|
|
if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443))
|
|
val |= SD_PEDESTAL_EN;
|
|
else
|
|
val &= SD_PEDESTAL_DI;
|
|
|
|
err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val);
|
|
if (err < 0)
|
|
goto setstd_exit;
|
|
|
|
state->reg82 = val;
|
|
|
|
setstd_exit:
|
|
if (err != 0)
|
|
v4l2_err(sd, "Error setting std, write failed\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int adv7393_setoutput(struct v4l2_subdev *sd, u32 output_type)
|
|
{
|
|
struct adv7393_state *state = to_state(sd);
|
|
u8 val;
|
|
int err = 0;
|
|
|
|
if (output_type > ADV7393_SVIDEO_ID) {
|
|
v4l2_dbg(1, debug, sd,
|
|
"Invalid output type or output type not supported:%d\n",
|
|
output_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Enable Appropriate DAC */
|
|
val = state->reg00 & 0x03;
|
|
|
|
if (output_type == ADV7393_COMPOSITE_ID)
|
|
val |= ADV7393_COMPOSITE_POWER_VALUE;
|
|
else if (output_type == ADV7393_COMPONENT_ID)
|
|
val |= ADV7393_COMPONENT_POWER_VALUE;
|
|
else
|
|
val |= ADV7393_SVIDEO_POWER_VALUE;
|
|
|
|
err = adv7393_write(sd, ADV7393_POWER_MODE_REG, val);
|
|
if (err < 0)
|
|
goto setoutput_exit;
|
|
|
|
state->reg00 = val;
|
|
|
|
/* Enable YUV output */
|
|
val = state->reg02 | YUV_OUTPUT_SELECT;
|
|
err = adv7393_write(sd, ADV7393_MODE_REG0, val);
|
|
if (err < 0)
|
|
goto setoutput_exit;
|
|
|
|
state->reg02 = val;
|
|
|
|
/* configure SD DAC Output 1 bit */
|
|
val = state->reg82;
|
|
if (output_type == ADV7393_COMPONENT_ID)
|
|
val &= SD_DAC_OUT1_DI;
|
|
else
|
|
val |= SD_DAC_OUT1_EN;
|
|
err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val);
|
|
if (err < 0)
|
|
goto setoutput_exit;
|
|
|
|
state->reg82 = val;
|
|
|
|
/* configure ED/HD Color DAC Swap bit to zero */
|
|
val = state->reg35 & HD_DAC_SWAP_DI;
|
|
err = adv7393_write(sd, ADV7393_HD_MODE_REG6, val);
|
|
if (err < 0)
|
|
goto setoutput_exit;
|
|
|
|
state->reg35 = val;
|
|
|
|
setoutput_exit:
|
|
if (err != 0)
|
|
v4l2_err(sd, "Error setting output, write failed\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int adv7393_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7393_state *state = to_state(sd);
|
|
|
|
v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std);
|
|
v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" :
|
|
((state->output == 1) ? "Component" : "S-Video"));
|
|
return 0;
|
|
}
|
|
|
|
static int adv7393_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd = to_sd(ctrl);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
return adv7393_write(sd, ADV7393_SD_BRIGHTNESS_WSS,
|
|
ctrl->val & SD_BRIGHTNESS_VALUE_MASK);
|
|
|
|
case V4L2_CID_HUE:
|
|
return adv7393_write(sd, ADV7393_SD_HUE_ADJUST,
|
|
ctrl->val - ADV7393_HUE_MIN);
|
|
|
|
case V4L2_CID_GAIN:
|
|
return adv7393_write(sd, ADV7393_DAC123_OUTPUT_LEVEL,
|
|
ctrl->val);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops adv7393_ctrl_ops = {
|
|
.s_ctrl = adv7393_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops adv7393_core_ops = {
|
|
.log_status = adv7393_log_status,
|
|
};
|
|
|
|
static int adv7393_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
{
|
|
struct adv7393_state *state = to_state(sd);
|
|
int err = 0;
|
|
|
|
if (state->std == std)
|
|
return 0;
|
|
|
|
err = adv7393_setstd(sd, std);
|
|
if (!err)
|
|
state->std = std;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int adv7393_s_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct adv7393_state *state = to_state(sd);
|
|
int err = 0;
|
|
|
|
if (state->output == output)
|
|
return 0;
|
|
|
|
err = adv7393_setoutput(sd, output);
|
|
if (!err)
|
|
state->output = output;
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops adv7393_video_ops = {
|
|
.s_std_output = adv7393_s_std_output,
|
|
.s_routing = adv7393_s_routing,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops adv7393_ops = {
|
|
.core = &adv7393_core_ops,
|
|
.video = &adv7393_video_ops,
|
|
};
|
|
|
|
static int adv7393_initialize(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv7393_state *state = to_state(sd);
|
|
int err = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adv7393_init_reg_val); i += 2) {
|
|
|
|
err = adv7393_write(sd, adv7393_init_reg_val[i],
|
|
adv7393_init_reg_val[i+1]);
|
|
if (err) {
|
|
v4l2_err(sd, "Error initializing\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* Configure for default video standard */
|
|
err = adv7393_setoutput(sd, state->output);
|
|
if (err < 0) {
|
|
v4l2_err(sd, "Error setting output during init\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = adv7393_setstd(sd, state->std);
|
|
if (err < 0) {
|
|
v4l2_err(sd, "Error setting std during init\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int adv7393_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct adv7393_state *state;
|
|
int err;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
v4l_info(client, "chip found @ 0x%x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return -ENOMEM;
|
|
|
|
state->reg00 = ADV7393_POWER_MODE_REG_DEFAULT;
|
|
state->reg01 = 0x00;
|
|
state->reg02 = 0x20;
|
|
state->reg35 = ADV7393_HD_MODE_REG6_DEFAULT;
|
|
state->reg80 = ADV7393_SD_MODE_REG1_DEFAULT;
|
|
state->reg82 = ADV7393_SD_MODE_REG2_DEFAULT;
|
|
|
|
state->output = ADV7393_COMPOSITE_ID;
|
|
state->std = V4L2_STD_NTSC;
|
|
|
|
v4l2_i2c_subdev_init(&state->sd, client, &adv7393_ops);
|
|
|
|
v4l2_ctrl_handler_init(&state->hdl, 3);
|
|
v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, ADV7393_BRIGHTNESS_MIN,
|
|
ADV7393_BRIGHTNESS_MAX, 1,
|
|
ADV7393_BRIGHTNESS_DEF);
|
|
v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops,
|
|
V4L2_CID_HUE, ADV7393_HUE_MIN,
|
|
ADV7393_HUE_MAX, 1,
|
|
ADV7393_HUE_DEF);
|
|
v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops,
|
|
V4L2_CID_GAIN, ADV7393_GAIN_MIN,
|
|
ADV7393_GAIN_MAX, 1,
|
|
ADV7393_GAIN_DEF);
|
|
state->sd.ctrl_handler = &state->hdl;
|
|
if (state->hdl.error) {
|
|
int err = state->hdl.error;
|
|
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
|
return err;
|
|
}
|
|
v4l2_ctrl_handler_setup(&state->hdl);
|
|
|
|
err = adv7393_initialize(&state->sd);
|
|
if (err)
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
|
return err;
|
|
}
|
|
|
|
static void adv7393_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct adv7393_state *state = to_state(sd);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
|
}
|
|
|
|
static const struct i2c_device_id adv7393_id[] = {
|
|
{"adv7393", 0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adv7393_id);
|
|
|
|
static struct i2c_driver adv7393_driver = {
|
|
.driver = {
|
|
.name = "adv7393",
|
|
},
|
|
.probe = adv7393_probe,
|
|
.remove = adv7393_remove,
|
|
.id_table = adv7393_id,
|
|
};
|
|
module_i2c_driver(adv7393_driver);
|