linux/drivers/usb/musb/musb_debugfs.c
Paul Cercueil 21acc656a0 usb: musb: Add and use inline functions musb_{get,set}_state
Instead of manipulating musb->xceiv->otg->state directly, use the newly
introduced musb_get_state() and musb_set_state() inline functions.

Later, these inline functions will be modified to get rid of the
musb->xceiv dependency, which prevents the musb code from using the
generic PHY subsystem.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221026182657.146630-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-09 12:39:12 +01:00

342 lines
8.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* MUSB OTG driver debugfs support
*
* Copyright 2010 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include "musb_core.h"
#include "musb_debug.h"
struct musb_register_map {
char *name;
unsigned offset;
unsigned size;
};
static const struct musb_register_map musb_regmap[] = {
{ "FAddr", MUSB_FADDR, 8 },
{ "Power", MUSB_POWER, 8 },
{ "Frame", MUSB_FRAME, 16 },
{ "Index", MUSB_INDEX, 8 },
{ "Testmode", MUSB_TESTMODE, 8 },
{ "TxMaxPp", MUSB_TXMAXP, 16 },
{ "TxCSRp", MUSB_TXCSR, 16 },
{ "RxMaxPp", MUSB_RXMAXP, 16 },
{ "RxCSR", MUSB_RXCSR, 16 },
{ "RxCount", MUSB_RXCOUNT, 16 },
{ "IntrRxE", MUSB_INTRRXE, 16 },
{ "IntrTxE", MUSB_INTRTXE, 16 },
{ "IntrUsbE", MUSB_INTRUSBE, 8 },
{ "DevCtl", MUSB_DEVCTL, 8 },
{ "VControl", 0x68, 32 },
{ "HWVers", 0x69, 16 },
{ "LinkInfo", MUSB_LINKINFO, 8 },
{ "VPLen", MUSB_VPLEN, 8 },
{ "HS_EOF1", MUSB_HS_EOF1, 8 },
{ "FS_EOF1", MUSB_FS_EOF1, 8 },
{ "LS_EOF1", MUSB_LS_EOF1, 8 },
{ "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
{ "DMA_ADDRch0", 0x208, 32 },
{ "DMA_COUNTch0", 0x20C, 32 },
{ "DMA_CNTLch1", 0x214, 16 },
{ "DMA_ADDRch1", 0x218, 32 },
{ "DMA_COUNTch1", 0x21C, 32 },
{ "DMA_CNTLch2", 0x224, 16 },
{ "DMA_ADDRch2", 0x228, 32 },
{ "DMA_COUNTch2", 0x22C, 32 },
{ "DMA_CNTLch3", 0x234, 16 },
{ "DMA_ADDRch3", 0x238, 32 },
{ "DMA_COUNTch3", 0x23C, 32 },
{ "DMA_CNTLch4", 0x244, 16 },
{ "DMA_ADDRch4", 0x248, 32 },
{ "DMA_COUNTch4", 0x24C, 32 },
{ "DMA_CNTLch5", 0x254, 16 },
{ "DMA_ADDRch5", 0x258, 32 },
{ "DMA_COUNTch5", 0x25C, 32 },
{ "DMA_CNTLch6", 0x264, 16 },
{ "DMA_ADDRch6", 0x268, 32 },
{ "DMA_COUNTch6", 0x26C, 32 },
{ "DMA_CNTLch7", 0x274, 16 },
{ "DMA_ADDRch7", 0x278, 32 },
{ "DMA_COUNTch7", 0x27C, 32 },
{ "ConfigData", MUSB_CONFIGDATA,8 },
{ "BabbleCtl", MUSB_BABBLE_CTL,8 },
{ "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
{ "RxFIFOsz", MUSB_RXFIFOSZ, 8 },
{ "TxFIFOadd", MUSB_TXFIFOADD, 16 },
{ "RxFIFOadd", MUSB_RXFIFOADD, 16 },
{ "EPInfo", MUSB_EPINFO, 8 },
{ "RAMInfo", MUSB_RAMINFO, 8 },
{ } /* Terminating Entry */
};
static int musb_regdump_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
unsigned i;
seq_printf(s, "MUSB (M)HDRC Register Dump\n");
pm_runtime_get_sync(musb->controller);
for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
switch (musb_regmap[i].size) {
case 8:
seq_printf(s, "%-12s: %02x\n", musb_regmap[i].name,
musb_readb(musb->mregs, musb_regmap[i].offset));
break;
case 16:
seq_printf(s, "%-12s: %04x\n", musb_regmap[i].name,
musb_readw(musb->mregs, musb_regmap[i].offset));
break;
case 32:
seq_printf(s, "%-12s: %08x\n", musb_regmap[i].name,
musb_readl(musb->mregs, musb_regmap[i].offset));
break;
}
}
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(musb_regdump);
static int musb_test_mode_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
unsigned test;
pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS))
seq_printf(s, "force host full-speed\n");
else if (test == (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS))
seq_printf(s, "force host high-speed\n");
else if (test == MUSB_TEST_FORCE_HOST)
seq_printf(s, "force host\n");
else if (test == MUSB_TEST_FIFO_ACCESS)
seq_printf(s, "fifo access\n");
else if (test == MUSB_TEST_FORCE_FS)
seq_printf(s, "force full-speed\n");
else if (test == MUSB_TEST_FORCE_HS)
seq_printf(s, "force high-speed\n");
else if (test == MUSB_TEST_PACKET)
seq_printf(s, "test packet\n");
else if (test == MUSB_TEST_K)
seq_printf(s, "test K\n");
else if (test == MUSB_TEST_J)
seq_printf(s, "test J\n");
else if (test == MUSB_TEST_SE0_NAK)
seq_printf(s, "test SE0 NAK\n");
return 0;
}
static int musb_test_mode_open(struct inode *inode, struct file *file)
{
return single_open(file, musb_test_mode_show, inode->i_private);
}
static ssize_t musb_test_mode_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct musb *musb = s->private;
u8 test;
char buf[24];
memset(buf, 0x00, sizeof(buf));
if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
if (test) {
dev_err(musb->controller, "Error: test mode is already set. "
"Please do USB Bus Reset to start a new test.\n");
goto ret;
}
if (strstarts(buf, "force host full-speed"))
test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS;
else if (strstarts(buf, "force host high-speed"))
test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS;
else if (strstarts(buf, "force host"))
test = MUSB_TEST_FORCE_HOST;
else if (strstarts(buf, "fifo access"))
test = MUSB_TEST_FIFO_ACCESS;
else if (strstarts(buf, "force full-speed"))
test = MUSB_TEST_FORCE_FS;
else if (strstarts(buf, "force high-speed"))
test = MUSB_TEST_FORCE_HS;
else if (strstarts(buf, "test packet")) {
test = MUSB_TEST_PACKET;
musb_load_testpacket(musb);
}
else if (strstarts(buf, "test K"))
test = MUSB_TEST_K;
else if (strstarts(buf, "test J"))
test = MUSB_TEST_J;
else if (strstarts(buf, "test SE0 NAK"))
test = MUSB_TEST_SE0_NAK;
musb_writeb(musb->mregs, MUSB_TESTMODE, test);
ret:
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return count;
}
static const struct file_operations musb_test_mode_fops = {
.open = musb_test_mode_open,
.write = musb_test_mode_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int musb_softconnect_show(struct seq_file *s, void *unused)
{
struct musb *musb = s->private;
u8 reg;
int connect;
switch (musb_get_state(musb)) {
case OTG_STATE_A_HOST:
case OTG_STATE_A_WAIT_BCON:
pm_runtime_get_sync(musb->controller);
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0;
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
break;
default:
connect = -1;
}
seq_printf(s, "%d\n", connect);
return 0;
}
static int musb_softconnect_open(struct inode *inode, struct file *file)
{
return single_open(file, musb_softconnect_show, inode->i_private);
}
static ssize_t musb_softconnect_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
struct seq_file *s = file->private_data;
struct musb *musb = s->private;
char buf[2];
u8 reg;
memset(buf, 0x00, sizeof(buf));
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
pm_runtime_get_sync(musb->controller);
if (!strncmp(buf, "0", 1)) {
switch (musb_get_state(musb)) {
case OTG_STATE_A_HOST:
musb_root_disconnect(musb);
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
reg &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, reg);
break;
default:
break;
}
} else if (!strncmp(buf, "1", 1)) {
switch (musb_get_state(musb)) {
case OTG_STATE_A_WAIT_BCON:
/*
* musb_save_context() called in musb_runtime_suspend()
* might cache devctl with SESSION bit cleared during
* soft-disconnect, so specifically set SESSION bit
* here to preserve it for musb_runtime_resume().
*/
musb->context.devctl |= MUSB_DEVCTL_SESSION;
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
reg |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, reg);
break;
default:
break;
}
}
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return count;
}
/*
* In host mode, connect/disconnect the bus without physically
* remove the devices.
*/
static const struct file_operations musb_softconnect_fops = {
.open = musb_softconnect_open,
.write = musb_softconnect_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
void musb_init_debugfs(struct musb *musb)
{
struct dentry *root;
root = debugfs_create_dir(dev_name(musb->controller), usb_debug_root);
musb->debugfs_root = root;
debugfs_create_file("regdump", S_IRUGO, root, musb, &musb_regdump_fops);
debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, musb,
&musb_test_mode_fops);
debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, root, musb,
&musb_softconnect_fops);
}
void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb)
{
debugfs_remove_recursive(musb->debugfs_root);
}