mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
d272bc92c4
The use of 'DTV' is very confusing since it normally refers to Digital TV e.g. DVB etc. Instead use 'DV' (Digital Video), which nicely corresponds to the DV Timings API used to configure such receivers and transmitters. We keep an alias to avoid breaking userspace applications. Since this alias is only available if __KERNEL__ is *not* defined (i.e. it is only available for userspace, not kernelspace), any drivers that use it also have to be converted to the new define. These drivers are adv7604, adv7842 and tda1997x. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
3582 lines
104 KiB
C
3582 lines
104 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* adv7604 - Analog Devices ADV7604 video decoder driver
|
|
*
|
|
* Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* References (c = chapter, p = page):
|
|
* REF_01 - Analog devices, ADV7604, Register Settings Recommendations,
|
|
* Revision 2.5, June 2010
|
|
* REF_02 - Analog devices, Register map documentation, Documentation of
|
|
* the register maps, Software manual, Rev. F, June 2010
|
|
* REF_03 - Analog devices, ADV7604, Hardware Manual, Rev. F, August 2010
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/hdmi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <media/i2c/adv7604.h>
|
|
#include <media/cec.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-dv-timings.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "debug level (0-2)");
|
|
|
|
MODULE_DESCRIPTION("Analog Devices ADV7604 video decoder driver");
|
|
MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
|
|
MODULE_AUTHOR("Mats Randgaard <mats.randgaard@cisco.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* ADV7604 system clock frequency */
|
|
#define ADV76XX_FSC (28636360)
|
|
|
|
#define ADV76XX_RGB_OUT (1 << 1)
|
|
|
|
#define ADV76XX_OP_FORMAT_SEL_8BIT (0 << 0)
|
|
#define ADV7604_OP_FORMAT_SEL_10BIT (1 << 0)
|
|
#define ADV76XX_OP_FORMAT_SEL_12BIT (2 << 0)
|
|
|
|
#define ADV76XX_OP_MODE_SEL_SDR_422 (0 << 5)
|
|
#define ADV7604_OP_MODE_SEL_DDR_422 (1 << 5)
|
|
#define ADV76XX_OP_MODE_SEL_SDR_444 (2 << 5)
|
|
#define ADV7604_OP_MODE_SEL_DDR_444 (3 << 5)
|
|
#define ADV76XX_OP_MODE_SEL_SDR_422_2X (4 << 5)
|
|
#define ADV7604_OP_MODE_SEL_ADI_CM (5 << 5)
|
|
|
|
#define ADV76XX_OP_CH_SEL_GBR (0 << 5)
|
|
#define ADV76XX_OP_CH_SEL_GRB (1 << 5)
|
|
#define ADV76XX_OP_CH_SEL_BGR (2 << 5)
|
|
#define ADV76XX_OP_CH_SEL_RGB (3 << 5)
|
|
#define ADV76XX_OP_CH_SEL_BRG (4 << 5)
|
|
#define ADV76XX_OP_CH_SEL_RBG (5 << 5)
|
|
|
|
#define ADV76XX_OP_SWAP_CB_CR (1 << 0)
|
|
|
|
#define ADV76XX_MAX_ADDRS (3)
|
|
|
|
enum adv76xx_type {
|
|
ADV7604,
|
|
ADV7611,
|
|
ADV7612,
|
|
};
|
|
|
|
struct adv76xx_reg_seq {
|
|
unsigned int reg;
|
|
u8 val;
|
|
};
|
|
|
|
struct adv76xx_format_info {
|
|
u32 code;
|
|
u8 op_ch_sel;
|
|
bool rgb_out;
|
|
bool swap_cb_cr;
|
|
u8 op_format_sel;
|
|
};
|
|
|
|
struct adv76xx_cfg_read_infoframe {
|
|
const char *desc;
|
|
u8 present_mask;
|
|
u8 head_addr;
|
|
u8 payload_addr;
|
|
};
|
|
|
|
struct adv76xx_chip_info {
|
|
enum adv76xx_type type;
|
|
|
|
bool has_afe;
|
|
unsigned int max_port;
|
|
unsigned int num_dv_ports;
|
|
|
|
unsigned int edid_enable_reg;
|
|
unsigned int edid_status_reg;
|
|
unsigned int lcf_reg;
|
|
|
|
unsigned int cable_det_mask;
|
|
unsigned int tdms_lock_mask;
|
|
unsigned int fmt_change_digital_mask;
|
|
unsigned int cp_csc;
|
|
|
|
const struct adv76xx_format_info *formats;
|
|
unsigned int nformats;
|
|
|
|
void (*set_termination)(struct v4l2_subdev *sd, bool enable);
|
|
void (*setup_irqs)(struct v4l2_subdev *sd);
|
|
unsigned int (*read_hdmi_pixelclock)(struct v4l2_subdev *sd);
|
|
unsigned int (*read_cable_det)(struct v4l2_subdev *sd);
|
|
|
|
/* 0 = AFE, 1 = HDMI */
|
|
const struct adv76xx_reg_seq *recommended_settings[2];
|
|
unsigned int num_recommended_settings[2];
|
|
|
|
unsigned long page_mask;
|
|
|
|
/* Masks for timings */
|
|
unsigned int linewidth_mask;
|
|
unsigned int field0_height_mask;
|
|
unsigned int field1_height_mask;
|
|
unsigned int hfrontporch_mask;
|
|
unsigned int hsync_mask;
|
|
unsigned int hbackporch_mask;
|
|
unsigned int field0_vfrontporch_mask;
|
|
unsigned int field1_vfrontporch_mask;
|
|
unsigned int field0_vsync_mask;
|
|
unsigned int field1_vsync_mask;
|
|
unsigned int field0_vbackporch_mask;
|
|
unsigned int field1_vbackporch_mask;
|
|
};
|
|
|
|
/*
|
|
**********************************************************************
|
|
*
|
|
* Arrays with configuration parameters for the ADV7604
|
|
*
|
|
**********************************************************************
|
|
*/
|
|
|
|
struct adv76xx_state {
|
|
const struct adv76xx_chip_info *info;
|
|
struct adv76xx_platform_data pdata;
|
|
|
|
struct gpio_desc *hpd_gpio[4];
|
|
struct gpio_desc *reset_gpio;
|
|
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pads[ADV76XX_PAD_MAX];
|
|
unsigned int source_pad;
|
|
|
|
struct v4l2_ctrl_handler hdl;
|
|
|
|
enum adv76xx_pad selected_input;
|
|
|
|
struct v4l2_dv_timings timings;
|
|
const struct adv76xx_format_info *format;
|
|
|
|
struct {
|
|
u8 edid[256];
|
|
u32 present;
|
|
unsigned blocks;
|
|
} edid;
|
|
u16 spa_port_a[2];
|
|
struct v4l2_fract aspect_ratio;
|
|
u32 rgb_quantization_range;
|
|
struct delayed_work delayed_work_enable_hotplug;
|
|
bool restart_stdi_once;
|
|
|
|
/* CEC */
|
|
struct cec_adapter *cec_adap;
|
|
u8 cec_addr[ADV76XX_MAX_ADDRS];
|
|
u8 cec_valid_addrs;
|
|
bool cec_enabled_adap;
|
|
|
|
/* i2c clients */
|
|
struct i2c_client *i2c_clients[ADV76XX_PAGE_MAX];
|
|
|
|
/* Regmaps */
|
|
struct regmap *regmap[ADV76XX_PAGE_MAX];
|
|
|
|
/* controls */
|
|
struct v4l2_ctrl *detect_tx_5v_ctrl;
|
|
struct v4l2_ctrl *analog_sampling_phase_ctrl;
|
|
struct v4l2_ctrl *free_run_color_manual_ctrl;
|
|
struct v4l2_ctrl *free_run_color_ctrl;
|
|
struct v4l2_ctrl *rgb_quantization_range_ctrl;
|
|
};
|
|
|
|
static bool adv76xx_has_afe(struct adv76xx_state *state)
|
|
{
|
|
return state->info->has_afe;
|
|
}
|
|
|
|
/* Unsupported timings. This device cannot support 720p30. */
|
|
static const struct v4l2_dv_timings adv76xx_timings_exceptions[] = {
|
|
V4L2_DV_BT_CEA_1280X720P30,
|
|
{ }
|
|
};
|
|
|
|
static bool adv76xx_check_dv_timings(const struct v4l2_dv_timings *t, void *hdl)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; adv76xx_timings_exceptions[i].bt.width; i++)
|
|
if (v4l2_match_dv_timings(t, adv76xx_timings_exceptions + i, 0, false))
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
struct adv76xx_video_standards {
|
|
struct v4l2_dv_timings timings;
|
|
u8 vid_std;
|
|
u8 v_freq;
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv76xx_video_standards adv7604_prim_mode_comp[] = {
|
|
/* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */
|
|
{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
|
|
/* TODO add 1920x1080P60_RB (CVT timing) */
|
|
{ },
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv76xx_video_standards adv7604_prim_mode_gr[] = {
|
|
{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */
|
|
/* TODO add 1600X1200P60_RB (not a DMT timing) */
|
|
{ V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */
|
|
{ },
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv76xx_video_standards adv76xx_prim_mode_hdmi_comp[] = {
|
|
{ V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 },
|
|
{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
|
|
{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
|
|
{ },
|
|
};
|
|
|
|
/* sorted by number of lines */
|
|
static const struct adv76xx_video_standards adv76xx_prim_mode_hdmi_gr[] = {
|
|
{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
|
|
{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
|
|
{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
|
|
{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
|
|
{ },
|
|
};
|
|
|
|
static const struct v4l2_event adv76xx_ev_fmt = {
|
|
.type = V4L2_EVENT_SOURCE_CHANGE,
|
|
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline struct adv76xx_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct adv76xx_state, sd);
|
|
}
|
|
|
|
static inline unsigned htotal(const struct v4l2_bt_timings *t)
|
|
{
|
|
return V4L2_DV_BT_FRAME_WIDTH(t);
|
|
}
|
|
|
|
static inline unsigned vtotal(const struct v4l2_bt_timings *t)
|
|
{
|
|
return V4L2_DV_BT_FRAME_HEIGHT(t);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int adv76xx_read_check(struct adv76xx_state *state,
|
|
int client_page, u8 reg)
|
|
{
|
|
struct i2c_client *client = state->i2c_clients[client_page];
|
|
int err;
|
|
unsigned int val;
|
|
|
|
err = regmap_read(state->regmap[client_page], reg, &val);
|
|
|
|
if (err) {
|
|
v4l_err(client, "error reading %02x, %02x\n",
|
|
client->addr, reg);
|
|
return err;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
/* adv76xx_write_block(): Write raw data with a maximum of I2C_SMBUS_BLOCK_MAX
|
|
* size to one or more registers.
|
|
*
|
|
* A value of zero will be returned on success, a negative errno will
|
|
* be returned in error cases.
|
|
*/
|
|
static int adv76xx_write_block(struct adv76xx_state *state, int client_page,
|
|
unsigned int init_reg, const void *val,
|
|
size_t val_len)
|
|
{
|
|
struct regmap *regmap = state->regmap[client_page];
|
|
|
|
if (val_len > I2C_SMBUS_BLOCK_MAX)
|
|
val_len = I2C_SMBUS_BLOCK_MAX;
|
|
|
|
return regmap_raw_write(regmap, init_reg, val, val_len);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline int io_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_IO, reg);
|
|
}
|
|
|
|
static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_IO], reg, val);
|
|
}
|
|
|
|
static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
|
|
u8 val)
|
|
{
|
|
return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int avlink_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV7604_PAGE_AVLINK, reg);
|
|
}
|
|
|
|
static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV7604_PAGE_AVLINK], reg, val);
|
|
}
|
|
|
|
static inline int cec_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_CEC, reg);
|
|
}
|
|
|
|
static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_CEC], reg, val);
|
|
}
|
|
|
|
static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
|
|
u8 val)
|
|
{
|
|
return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_INFOFRAME, reg);
|
|
}
|
|
|
|
static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_INFOFRAME], reg, val);
|
|
}
|
|
|
|
static inline int afe_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_AFE, reg);
|
|
}
|
|
|
|
static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_AFE], reg, val);
|
|
}
|
|
|
|
static inline int rep_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_REP, reg);
|
|
}
|
|
|
|
static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_REP], reg, val);
|
|
}
|
|
|
|
static inline int rep_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return rep_write(sd, reg, (rep_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int edid_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_EDID, reg);
|
|
}
|
|
|
|
static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_EDID], reg, val);
|
|
}
|
|
|
|
static inline int edid_write_block(struct v4l2_subdev *sd,
|
|
unsigned int total_len, const u8 *val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
int err = 0;
|
|
int i = 0;
|
|
int len = 0;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: write EDID block (%d byte)\n",
|
|
__func__, total_len);
|
|
|
|
while (!err && i < total_len) {
|
|
len = (total_len - i) > I2C_SMBUS_BLOCK_MAX ?
|
|
I2C_SMBUS_BLOCK_MAX :
|
|
(total_len - i);
|
|
|
|
err = adv76xx_write_block(state, ADV76XX_PAGE_EDID,
|
|
i, val + i, len);
|
|
i += len;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void adv76xx_set_hpd(struct adv76xx_state *state, unsigned int hpd)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < state->info->num_dv_ports; ++i)
|
|
gpiod_set_value_cansleep(state->hpd_gpio[i], hpd & BIT(i));
|
|
|
|
v4l2_subdev_notify(&state->sd, ADV76XX_HOTPLUG, &hpd);
|
|
}
|
|
|
|
static void adv76xx_delayed_work_enable_hotplug(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct adv76xx_state *state = container_of(dwork, struct adv76xx_state,
|
|
delayed_work_enable_hotplug);
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__);
|
|
|
|
adv76xx_set_hpd(state, state->edid.present);
|
|
}
|
|
|
|
static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_HDMI, reg);
|
|
}
|
|
|
|
static u16 hdmi_read16(struct v4l2_subdev *sd, u8 reg, u16 mask)
|
|
{
|
|
return ((hdmi_read(sd, reg) << 8) | hdmi_read(sd, reg + 1)) & mask;
|
|
}
|
|
|
|
static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_HDMI], reg, val);
|
|
}
|
|
|
|
static inline int hdmi_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return hdmi_write(sd, reg, (hdmi_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int test_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_TEST], reg, val);
|
|
}
|
|
|
|
static inline int cp_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV76XX_PAGE_CP, reg);
|
|
}
|
|
|
|
static u16 cp_read16(struct v4l2_subdev *sd, u8 reg, u16 mask)
|
|
{
|
|
return ((cp_read(sd, reg) << 8) | cp_read(sd, reg + 1)) & mask;
|
|
}
|
|
|
|
static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV76XX_PAGE_CP], reg, val);
|
|
}
|
|
|
|
static inline int cp_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
|
{
|
|
return cp_write(sd, reg, (cp_read(sd, reg) & ~mask) | val);
|
|
}
|
|
|
|
static inline int vdp_read(struct v4l2_subdev *sd, u8 reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return adv76xx_read_check(state, ADV7604_PAGE_VDP, reg);
|
|
}
|
|
|
|
static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return regmap_write(state->regmap[ADV7604_PAGE_VDP], reg, val);
|
|
}
|
|
|
|
#define ADV76XX_REG(page, offset) (((page) << 8) | (offset))
|
|
#define ADV76XX_REG_SEQ_TERM 0xffff
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int adv76xx_read_reg(struct v4l2_subdev *sd, unsigned int reg)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
unsigned int page = reg >> 8;
|
|
unsigned int val;
|
|
int err;
|
|
|
|
if (page >= ADV76XX_PAGE_MAX || !(BIT(page) & state->info->page_mask))
|
|
return -EINVAL;
|
|
|
|
reg &= 0xff;
|
|
err = regmap_read(state->regmap[page], reg, &val);
|
|
|
|
return err ? err : val;
|
|
}
|
|
#endif
|
|
|
|
static int adv76xx_write_reg(struct v4l2_subdev *sd, unsigned int reg, u8 val)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
unsigned int page = reg >> 8;
|
|
|
|
if (page >= ADV76XX_PAGE_MAX || !(BIT(page) & state->info->page_mask))
|
|
return -EINVAL;
|
|
|
|
reg &= 0xff;
|
|
|
|
return regmap_write(state->regmap[page], reg, val);
|
|
}
|
|
|
|
static void adv76xx_write_reg_seq(struct v4l2_subdev *sd,
|
|
const struct adv76xx_reg_seq *reg_seq)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; reg_seq[i].reg != ADV76XX_REG_SEQ_TERM; i++)
|
|
adv76xx_write_reg(sd, reg_seq[i].reg, reg_seq[i].val);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Format helpers
|
|
*/
|
|
|
|
static const struct adv76xx_format_info adv7604_formats[] = {
|
|
{ MEDIA_BUS_FMT_RGB888_1X24, ADV76XX_OP_CH_SEL_RGB, true, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_444 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV8_2X8, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YVYU8_2X8, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV10_2X10, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ MEDIA_BUS_FMT_YVYU10_2X10, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ MEDIA_BUS_FMT_YUYV12_2X12, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_YVYU12_2X12, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_UYVY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_VYUY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV8_1X16, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YVYU8_1X16, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_UYVY10_1X20, ADV76XX_OP_CH_SEL_RBG, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ MEDIA_BUS_FMT_VYUY10_1X20, ADV76XX_OP_CH_SEL_RBG, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ MEDIA_BUS_FMT_YUYV10_1X20, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ MEDIA_BUS_FMT_YVYU10_1X20, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV7604_OP_FORMAT_SEL_10BIT },
|
|
{ MEDIA_BUS_FMT_UYVY12_1X24, ADV76XX_OP_CH_SEL_RBG, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_VYUY12_1X24, ADV76XX_OP_CH_SEL_RBG, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_YUYV12_1X24, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_YVYU12_1X24, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
};
|
|
|
|
static const struct adv76xx_format_info adv7611_formats[] = {
|
|
{ MEDIA_BUS_FMT_RGB888_1X24, ADV76XX_OP_CH_SEL_RGB, true, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_444 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV8_2X8, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YVYU8_2X8, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV12_2X12, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_YVYU12_2X12, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_UYVY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_VYUY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV8_1X16, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YVYU8_1X16, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_UYVY12_1X24, ADV76XX_OP_CH_SEL_RBG, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_VYUY12_1X24, ADV76XX_OP_CH_SEL_RBG, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_YUYV12_1X24, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
{ MEDIA_BUS_FMT_YVYU12_1X24, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
|
|
};
|
|
|
|
static const struct adv76xx_format_info adv7612_formats[] = {
|
|
{ MEDIA_BUS_FMT_RGB888_1X24, ADV76XX_OP_CH_SEL_RGB, true, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_444 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV8_2X8, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YVYU8_2X8, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_UYVY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_VYUY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YUYV8_1X16, ADV76XX_OP_CH_SEL_RGB, false, false,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
{ MEDIA_BUS_FMT_YVYU8_1X16, ADV76XX_OP_CH_SEL_RGB, false, true,
|
|
ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
|
|
};
|
|
|
|
static const struct adv76xx_format_info *
|
|
adv76xx_format_info(struct adv76xx_state *state, u32 code)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < state->info->nformats; ++i) {
|
|
if (state->info->formats[i].code == code)
|
|
return &state->info->formats[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline bool is_analog_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return state->selected_input == ADV7604_PAD_VGA_RGB ||
|
|
state->selected_input == ADV7604_PAD_VGA_COMP;
|
|
}
|
|
|
|
static inline bool is_digital_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return state->selected_input == ADV76XX_PAD_HDMI_PORT_A ||
|
|
state->selected_input == ADV7604_PAD_HDMI_PORT_B ||
|
|
state->selected_input == ADV7604_PAD_HDMI_PORT_C ||
|
|
state->selected_input == ADV7604_PAD_HDMI_PORT_D;
|
|
}
|
|
|
|
static const struct v4l2_dv_timings_cap adv7604_timings_cap_analog = {
|
|
.type = V4L2_DV_BT_656_1120,
|
|
/* keep this initialization for compatibility with GCC < 4.4.6 */
|
|
.reserved = { 0 },
|
|
V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 170000000,
|
|
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
|
|
V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
|
|
V4L2_DV_BT_CAP_CUSTOM)
|
|
};
|
|
|
|
static const struct v4l2_dv_timings_cap adv76xx_timings_cap_digital = {
|
|
.type = V4L2_DV_BT_656_1120,
|
|
/* keep this initialization for compatibility with GCC < 4.4.6 */
|
|
.reserved = { 0 },
|
|
V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 225000000,
|
|
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
|
|
V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
|
|
V4L2_DV_BT_CAP_CUSTOM)
|
|
};
|
|
|
|
/*
|
|
* Return the DV timings capabilities for the requested sink pad. As a special
|
|
* case, pad value -1 returns the capabilities for the currently selected input.
|
|
*/
|
|
static const struct v4l2_dv_timings_cap *
|
|
adv76xx_get_dv_timings_cap(struct v4l2_subdev *sd, int pad)
|
|
{
|
|
if (pad == -1) {
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
pad = state->selected_input;
|
|
}
|
|
|
|
switch (pad) {
|
|
case ADV76XX_PAD_HDMI_PORT_A:
|
|
case ADV7604_PAD_HDMI_PORT_B:
|
|
case ADV7604_PAD_HDMI_PORT_C:
|
|
case ADV7604_PAD_HDMI_PORT_D:
|
|
return &adv76xx_timings_cap_digital;
|
|
|
|
case ADV7604_PAD_VGA_RGB:
|
|
case ADV7604_PAD_VGA_COMP:
|
|
default:
|
|
return &adv7604_timings_cap_analog;
|
|
}
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static void adv76xx_inv_register(struct v4l2_subdev *sd)
|
|
{
|
|
v4l2_info(sd, "0x000-0x0ff: IO Map\n");
|
|
v4l2_info(sd, "0x100-0x1ff: AVLink Map\n");
|
|
v4l2_info(sd, "0x200-0x2ff: CEC Map\n");
|
|
v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n");
|
|
v4l2_info(sd, "0x400-0x4ff: ESDP Map\n");
|
|
v4l2_info(sd, "0x500-0x5ff: DPP Map\n");
|
|
v4l2_info(sd, "0x600-0x6ff: AFE Map\n");
|
|
v4l2_info(sd, "0x700-0x7ff: Repeater Map\n");
|
|
v4l2_info(sd, "0x800-0x8ff: EDID Map\n");
|
|
v4l2_info(sd, "0x900-0x9ff: HDMI Map\n");
|
|
v4l2_info(sd, "0xa00-0xaff: Test Map\n");
|
|
v4l2_info(sd, "0xb00-0xbff: CP Map\n");
|
|
v4l2_info(sd, "0xc00-0xcff: VDP Map\n");
|
|
}
|
|
|
|
static int adv76xx_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = adv76xx_read_reg(sd, reg->reg);
|
|
if (ret < 0) {
|
|
v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
|
|
adv76xx_inv_register(sd);
|
|
return ret;
|
|
}
|
|
|
|
reg->size = 1;
|
|
reg->val = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = adv76xx_write_reg(sd, reg->reg, reg->val);
|
|
if (ret < 0) {
|
|
v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
|
|
adv76xx_inv_register(sd);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static unsigned int adv7604_read_cable_det(struct v4l2_subdev *sd)
|
|
{
|
|
u8 value = io_read(sd, 0x6f);
|
|
|
|
return ((value & 0x10) >> 4)
|
|
| ((value & 0x08) >> 2)
|
|
| ((value & 0x04) << 0)
|
|
| ((value & 0x02) << 2);
|
|
}
|
|
|
|
static unsigned int adv7611_read_cable_det(struct v4l2_subdev *sd)
|
|
{
|
|
u8 value = io_read(sd, 0x6f);
|
|
|
|
return value & 1;
|
|
}
|
|
|
|
static unsigned int adv7612_read_cable_det(struct v4l2_subdev *sd)
|
|
{
|
|
/* Reads CABLE_DET_A_RAW. For input B support, need to
|
|
* account for bit 7 [MSB] of 0x6a (ie. CABLE_DET_B_RAW)
|
|
*/
|
|
u8 value = io_read(sd, 0x6f);
|
|
|
|
return value & 1;
|
|
}
|
|
|
|
static int adv76xx_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
u16 cable_det = info->read_cable_det(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
|
|
}
|
|
|
|
static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
|
|
u8 prim_mode,
|
|
const struct adv76xx_video_standards *predef_vid_timings,
|
|
const struct v4l2_dv_timings *timings)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; predef_vid_timings[i].timings.bt.width; i++) {
|
|
if (!v4l2_match_dv_timings(timings, &predef_vid_timings[i].timings,
|
|
is_digital_input(sd) ? 250000 : 1000000, false))
|
|
continue;
|
|
io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */
|
|
io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) +
|
|
prim_mode); /* v_freq and prim mode */
|
|
return 0;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int configure_predefined_video_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
int err;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s", __func__);
|
|
|
|
if (adv76xx_has_afe(state)) {
|
|
/* reset to default values */
|
|
io_write(sd, 0x16, 0x43);
|
|
io_write(sd, 0x17, 0x5a);
|
|
}
|
|
/* disable embedded syncs for auto graphics mode */
|
|
cp_write_clr_set(sd, 0x81, 0x10, 0x00);
|
|
cp_write(sd, 0x8f, 0x00);
|
|
cp_write(sd, 0x90, 0x00);
|
|
cp_write(sd, 0xa2, 0x00);
|
|
cp_write(sd, 0xa3, 0x00);
|
|
cp_write(sd, 0xa4, 0x00);
|
|
cp_write(sd, 0xa5, 0x00);
|
|
cp_write(sd, 0xa6, 0x00);
|
|
cp_write(sd, 0xa7, 0x00);
|
|
cp_write(sd, 0xab, 0x00);
|
|
cp_write(sd, 0xac, 0x00);
|
|
|
|
if (is_analog_input(sd)) {
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x01, adv7604_prim_mode_comp, timings);
|
|
if (err)
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x02, adv7604_prim_mode_gr, timings);
|
|
} else if (is_digital_input(sd)) {
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x05, adv76xx_prim_mode_hdmi_comp, timings);
|
|
if (err)
|
|
err = find_and_set_predefined_video_timings(sd,
|
|
0x06, adv76xx_prim_mode_hdmi_gr, timings);
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
err = -1;
|
|
}
|
|
|
|
|
|
return err;
|
|
}
|
|
|
|
static void configure_custom_video_timings(struct v4l2_subdev *sd,
|
|
const struct v4l2_bt_timings *bt)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
u32 width = htotal(bt);
|
|
u32 height = vtotal(bt);
|
|
u16 cp_start_sav = bt->hsync + bt->hbackporch - 4;
|
|
u16 cp_start_eav = width - bt->hfrontporch;
|
|
u16 cp_start_vbi = height - bt->vfrontporch;
|
|
u16 cp_end_vbi = bt->vsync + bt->vbackporch;
|
|
u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ?
|
|
((width * (ADV76XX_FSC / 100)) / ((u32)bt->pixelclock / 100)) : 0;
|
|
const u8 pll[2] = {
|
|
0xc0 | ((width >> 8) & 0x1f),
|
|
width & 0xff
|
|
};
|
|
|
|
v4l2_dbg(2, debug, sd, "%s\n", __func__);
|
|
|
|
if (is_analog_input(sd)) {
|
|
/* auto graphics */
|
|
io_write(sd, 0x00, 0x07); /* video std */
|
|
io_write(sd, 0x01, 0x02); /* prim mode */
|
|
/* enable embedded syncs for auto graphics mode */
|
|
cp_write_clr_set(sd, 0x81, 0x10, 0x10);
|
|
|
|
/* Should only be set in auto-graphics mode [REF_02, p. 91-92] */
|
|
/* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */
|
|
/* IO-map reg. 0x16 and 0x17 should be written in sequence */
|
|
if (regmap_raw_write(state->regmap[ADV76XX_PAGE_IO],
|
|
0x16, pll, 2))
|
|
v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n");
|
|
|
|
/* active video - horizontal timing */
|
|
cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff);
|
|
cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) |
|
|
((cp_start_eav >> 8) & 0x0f));
|
|
cp_write(sd, 0xa4, cp_start_eav & 0xff);
|
|
|
|
/* active video - vertical timing */
|
|
cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff);
|
|
cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) |
|
|
((cp_end_vbi >> 8) & 0xf));
|
|
cp_write(sd, 0xa7, cp_end_vbi & 0xff);
|
|
} else if (is_digital_input(sd)) {
|
|
/* set default prim_mode/vid_std for HDMI
|
|
according to [REF_03, c. 4.2] */
|
|
io_write(sd, 0x00, 0x02); /* video std */
|
|
io_write(sd, 0x01, 0x06); /* prim mode */
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
}
|
|
|
|
cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);
|
|
cp_write(sd, 0x90, ch1_fr_ll & 0xff);
|
|
cp_write(sd, 0xab, (height >> 4) & 0xff);
|
|
cp_write(sd, 0xac, (height & 0x0f) << 4);
|
|
}
|
|
|
|
static void adv76xx_set_offset(struct v4l2_subdev *sd, bool auto_offset, u16 offset_a, u16 offset_b, u16 offset_c)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
u8 offset_buf[4];
|
|
|
|
if (auto_offset) {
|
|
offset_a = 0x3ff;
|
|
offset_b = 0x3ff;
|
|
offset_c = 0x3ff;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
|
|
__func__, auto_offset ? "Auto" : "Manual",
|
|
offset_a, offset_b, offset_c);
|
|
|
|
offset_buf[0] = (cp_read(sd, 0x77) & 0xc0) | ((offset_a & 0x3f0) >> 4);
|
|
offset_buf[1] = ((offset_a & 0x00f) << 4) | ((offset_b & 0x3c0) >> 6);
|
|
offset_buf[2] = ((offset_b & 0x03f) << 2) | ((offset_c & 0x300) >> 8);
|
|
offset_buf[3] = offset_c & 0x0ff;
|
|
|
|
/* Registers must be written in this order with no i2c access in between */
|
|
if (regmap_raw_write(state->regmap[ADV76XX_PAGE_CP],
|
|
0x77, offset_buf, 4))
|
|
v4l2_err(sd, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__);
|
|
}
|
|
|
|
static void adv76xx_set_gain(struct v4l2_subdev *sd, bool auto_gain, u16 gain_a, u16 gain_b, u16 gain_c)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
u8 gain_buf[4];
|
|
u8 gain_man = 1;
|
|
u8 agc_mode_man = 1;
|
|
|
|
if (auto_gain) {
|
|
gain_man = 0;
|
|
agc_mode_man = 0;
|
|
gain_a = 0x100;
|
|
gain_b = 0x100;
|
|
gain_c = 0x100;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
|
|
__func__, auto_gain ? "Auto" : "Manual",
|
|
gain_a, gain_b, gain_c);
|
|
|
|
gain_buf[0] = ((gain_man << 7) | (agc_mode_man << 6) | ((gain_a & 0x3f0) >> 4));
|
|
gain_buf[1] = (((gain_a & 0x00f) << 4) | ((gain_b & 0x3c0) >> 6));
|
|
gain_buf[2] = (((gain_b & 0x03f) << 2) | ((gain_c & 0x300) >> 8));
|
|
gain_buf[3] = ((gain_c & 0x0ff));
|
|
|
|
/* Registers must be written in this order with no i2c access in between */
|
|
if (regmap_raw_write(state->regmap[ADV76XX_PAGE_CP],
|
|
0x73, gain_buf, 4))
|
|
v4l2_err(sd, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__);
|
|
}
|
|
|
|
static void set_rgb_quantization_range(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
bool rgb_output = io_read(sd, 0x02) & 0x02;
|
|
bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
|
|
u8 y = HDMI_COLORSPACE_RGB;
|
|
|
|
if (hdmi_signal && (io_read(sd, 0x60) & 1))
|
|
y = infoframe_read(sd, 0x01) >> 5;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
|
|
__func__, state->rgb_quantization_range,
|
|
rgb_output, hdmi_signal);
|
|
|
|
adv76xx_set_gain(sd, true, 0x0, 0x0, 0x0);
|
|
adv76xx_set_offset(sd, true, 0x0, 0x0, 0x0);
|
|
io_write_clr_set(sd, 0x02, 0x04, rgb_output ? 0 : 4);
|
|
|
|
switch (state->rgb_quantization_range) {
|
|
case V4L2_DV_RGB_RANGE_AUTO:
|
|
if (state->selected_input == ADV7604_PAD_VGA_RGB) {
|
|
/* Receiving analog RGB signal
|
|
* Set RGB full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x10);
|
|
break;
|
|
}
|
|
|
|
if (state->selected_input == ADV7604_PAD_VGA_COMP) {
|
|
/* Receiving analog YPbPr signal
|
|
* Set automode */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0xf0);
|
|
break;
|
|
}
|
|
|
|
if (hdmi_signal) {
|
|
/* Receiving HDMI signal
|
|
* Set automode */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0xf0);
|
|
break;
|
|
}
|
|
|
|
/* Receiving DVI-D signal
|
|
* ADV7604 selects RGB limited range regardless of
|
|
* input format (CE/IT) in automatic mode */
|
|
if (state->timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) {
|
|
/* RGB limited range (16-235) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x00);
|
|
} else {
|
|
/* RGB full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x10);
|
|
|
|
if (is_digital_input(sd) && rgb_output) {
|
|
adv76xx_set_offset(sd, false, 0x40, 0x40, 0x40);
|
|
} else {
|
|
adv76xx_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
|
|
adv76xx_set_offset(sd, false, 0x70, 0x70, 0x70);
|
|
}
|
|
}
|
|
break;
|
|
case V4L2_DV_RGB_RANGE_LIMITED:
|
|
if (state->selected_input == ADV7604_PAD_VGA_COMP) {
|
|
/* YCrCb limited range (16-235) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x20);
|
|
break;
|
|
}
|
|
|
|
if (y != HDMI_COLORSPACE_RGB)
|
|
break;
|
|
|
|
/* RGB limited range (16-235) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x00);
|
|
|
|
break;
|
|
case V4L2_DV_RGB_RANGE_FULL:
|
|
if (state->selected_input == ADV7604_PAD_VGA_COMP) {
|
|
/* YCrCb full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x60);
|
|
break;
|
|
}
|
|
|
|
if (y != HDMI_COLORSPACE_RGB)
|
|
break;
|
|
|
|
/* RGB full range (0-255) */
|
|
io_write_clr_set(sd, 0x02, 0xf0, 0x10);
|
|
|
|
if (is_analog_input(sd) || hdmi_signal)
|
|
break;
|
|
|
|
/* Adjust gain/offset for DVI-D signals only */
|
|
if (rgb_output) {
|
|
adv76xx_set_offset(sd, false, 0x40, 0x40, 0x40);
|
|
} else {
|
|
adv76xx_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
|
|
adv76xx_set_offset(sd, false, 0x70, 0x70, 0x70);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int adv76xx_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd =
|
|
&container_of(ctrl->handler, struct adv76xx_state, hdl)->sd;
|
|
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
cp_write(sd, 0x3c, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_CONTRAST:
|
|
cp_write(sd, 0x3a, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_SATURATION:
|
|
cp_write(sd, 0x3b, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_HUE:
|
|
cp_write(sd, 0x3d, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_DV_RX_RGB_RANGE:
|
|
state->rgb_quantization_range = ctrl->val;
|
|
set_rgb_quantization_range(sd);
|
|
return 0;
|
|
case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE:
|
|
if (!adv76xx_has_afe(state))
|
|
return -EINVAL;
|
|
/* Set the analog sampling phase. This is needed to find the
|
|
best sampling phase for analog video: an application or
|
|
driver has to try a number of phases and analyze the picture
|
|
quality before settling on the best performing phase. */
|
|
afe_write(sd, 0xc8, ctrl->val);
|
|
return 0;
|
|
case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL:
|
|
/* Use the default blue color for free running mode,
|
|
or supply your own. */
|
|
cp_write_clr_set(sd, 0xbf, 0x04, ctrl->val << 2);
|
|
return 0;
|
|
case V4L2_CID_ADV_RX_FREE_RUN_COLOR:
|
|
cp_write(sd, 0xc0, (ctrl->val & 0xff0000) >> 16);
|
|
cp_write(sd, 0xc1, (ctrl->val & 0x00ff00) >> 8);
|
|
cp_write(sd, 0xc2, (u8)(ctrl->val & 0x0000ff));
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int adv76xx_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd =
|
|
&container_of(ctrl->handler, struct adv76xx_state, hdl)->sd;
|
|
|
|
if (ctrl->id == V4L2_CID_DV_RX_IT_CONTENT_TYPE) {
|
|
ctrl->val = V4L2_DV_IT_CONTENT_TYPE_NO_ITC;
|
|
if ((io_read(sd, 0x60) & 1) && (infoframe_read(sd, 0x03) & 0x80))
|
|
ctrl->val = (infoframe_read(sd, 0x05) >> 4) & 3;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline bool no_power(struct v4l2_subdev *sd)
|
|
{
|
|
/* Entire chip or CP powered off */
|
|
return io_read(sd, 0x0c) & 0x24;
|
|
}
|
|
|
|
static inline bool no_signal_tmds(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
return !(io_read(sd, 0x6a) & (0x10 >> state->selected_input));
|
|
}
|
|
|
|
static inline bool no_lock_tmds(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
|
|
return (io_read(sd, 0x6a) & info->tdms_lock_mask) != info->tdms_lock_mask;
|
|
}
|
|
|
|
static inline bool is_hdmi(struct v4l2_subdev *sd)
|
|
{
|
|
return hdmi_read(sd, 0x05) & 0x80;
|
|
}
|
|
|
|
static inline bool no_lock_sspd(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
/*
|
|
* Chips without a AFE don't expose registers for the SSPD, so just assume
|
|
* that we have a lock.
|
|
*/
|
|
if (adv76xx_has_afe(state))
|
|
return false;
|
|
|
|
/* TODO channel 2 */
|
|
return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0);
|
|
}
|
|
|
|
static inline bool no_lock_stdi(struct v4l2_subdev *sd)
|
|
{
|
|
/* TODO channel 2 */
|
|
return !(cp_read(sd, 0xb1) & 0x80);
|
|
}
|
|
|
|
static inline bool no_signal(struct v4l2_subdev *sd)
|
|
{
|
|
bool ret;
|
|
|
|
ret = no_power(sd);
|
|
|
|
ret |= no_lock_stdi(sd);
|
|
ret |= no_lock_sspd(sd);
|
|
|
|
if (is_digital_input(sd)) {
|
|
ret |= no_lock_tmds(sd);
|
|
ret |= no_signal_tmds(sd);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline bool no_lock_cp(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if (!adv76xx_has_afe(state))
|
|
return false;
|
|
|
|
/* CP has detected a non standard number of lines on the incoming
|
|
video compared to what it is configured to receive by s_dv_timings */
|
|
return io_read(sd, 0x12) & 0x01;
|
|
}
|
|
|
|
static inline bool in_free_run(struct v4l2_subdev *sd)
|
|
{
|
|
return cp_read(sd, 0xff) & 0x10;
|
|
}
|
|
|
|
static int adv76xx_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
*status = 0;
|
|
*status |= no_power(sd) ? V4L2_IN_ST_NO_POWER : 0;
|
|
*status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0;
|
|
if (!in_free_run(sd) && no_lock_cp(sd))
|
|
*status |= is_digital_input(sd) ?
|
|
V4L2_IN_ST_NO_SYNC : V4L2_IN_ST_NO_H_LOCK;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
struct stdi_readback {
|
|
u16 bl, lcf, lcvs;
|
|
u8 hs_pol, vs_pol;
|
|
bool interlaced;
|
|
};
|
|
|
|
static int stdi2dv_timings(struct v4l2_subdev *sd,
|
|
struct stdi_readback *stdi,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
u32 hfreq = (ADV76XX_FSC * 8) / stdi->bl;
|
|
u32 pix_clk;
|
|
int i;
|
|
|
|
for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
|
|
const struct v4l2_bt_timings *bt = &v4l2_dv_timings_presets[i].bt;
|
|
|
|
if (!v4l2_valid_dv_timings(&v4l2_dv_timings_presets[i],
|
|
adv76xx_get_dv_timings_cap(sd, -1),
|
|
adv76xx_check_dv_timings, NULL))
|
|
continue;
|
|
if (vtotal(bt) != stdi->lcf + 1)
|
|
continue;
|
|
if (bt->vsync != stdi->lcvs)
|
|
continue;
|
|
|
|
pix_clk = hfreq * htotal(bt);
|
|
|
|
if ((pix_clk < bt->pixelclock + 1000000) &&
|
|
(pix_clk > bt->pixelclock - 1000000)) {
|
|
*timings = v4l2_dv_timings_presets[i];
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, 0,
|
|
(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
|
|
(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
|
|
false, timings))
|
|
return 0;
|
|
if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs,
|
|
(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
|
|
(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
|
|
false, state->aspect_ratio, timings))
|
|
return 0;
|
|
|
|
v4l2_dbg(2, debug, sd,
|
|
"%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n",
|
|
__func__, stdi->lcvs, stdi->lcf, stdi->bl,
|
|
stdi->hs_pol, stdi->vs_pol);
|
|
return -1;
|
|
}
|
|
|
|
|
|
static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
u8 polarity;
|
|
|
|
if (no_lock_stdi(sd) || no_lock_sspd(sd)) {
|
|
v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* read STDI */
|
|
stdi->bl = cp_read16(sd, 0xb1, 0x3fff);
|
|
stdi->lcf = cp_read16(sd, info->lcf_reg, 0x7ff);
|
|
stdi->lcvs = cp_read(sd, 0xb3) >> 3;
|
|
stdi->interlaced = io_read(sd, 0x12) & 0x10;
|
|
|
|
if (adv76xx_has_afe(state)) {
|
|
/* read SSPD */
|
|
polarity = cp_read(sd, 0xb5);
|
|
if ((polarity & 0x03) == 0x01) {
|
|
stdi->hs_pol = polarity & 0x10
|
|
? (polarity & 0x08 ? '+' : '-') : 'x';
|
|
stdi->vs_pol = polarity & 0x40
|
|
? (polarity & 0x20 ? '+' : '-') : 'x';
|
|
} else {
|
|
stdi->hs_pol = 'x';
|
|
stdi->vs_pol = 'x';
|
|
}
|
|
} else {
|
|
polarity = hdmi_read(sd, 0x05);
|
|
stdi->hs_pol = polarity & 0x20 ? '+' : '-';
|
|
stdi->vs_pol = polarity & 0x10 ? '+' : '-';
|
|
}
|
|
|
|
if (no_lock_stdi(sd) || no_lock_sspd(sd)) {
|
|
v4l2_dbg(2, debug, sd,
|
|
"%s: signal lost during readout of STDI/SSPD\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) {
|
|
v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__);
|
|
memset(stdi, 0, sizeof(struct stdi_readback));
|
|
return -1;
|
|
}
|
|
|
|
v4l2_dbg(2, debug, sd,
|
|
"%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n",
|
|
__func__, stdi->lcf, stdi->bl, stdi->lcvs,
|
|
stdi->hs_pol, stdi->vs_pol,
|
|
stdi->interlaced ? "interlaced" : "progressive");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_enum_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_enum_dv_timings *timings)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if (timings->pad >= state->source_pad)
|
|
return -EINVAL;
|
|
|
|
return v4l2_enum_dv_timings_cap(timings,
|
|
adv76xx_get_dv_timings_cap(sd, timings->pad),
|
|
adv76xx_check_dv_timings, NULL);
|
|
}
|
|
|
|
static int adv76xx_dv_timings_cap(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings_cap *cap)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
unsigned int pad = cap->pad;
|
|
|
|
if (cap->pad >= state->source_pad)
|
|
return -EINVAL;
|
|
|
|
*cap = *adv76xx_get_dv_timings_cap(sd, pad);
|
|
cap->pad = pad;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
|
|
if the format is listed in adv76xx_timings[] */
|
|
static void adv76xx_fill_optional_dv_timings_fields(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
v4l2_find_dv_timings_cap(timings, adv76xx_get_dv_timings_cap(sd, -1),
|
|
is_digital_input(sd) ? 250000 : 1000000,
|
|
adv76xx_check_dv_timings, NULL);
|
|
}
|
|
|
|
static unsigned int adv7604_read_hdmi_pixelclock(struct v4l2_subdev *sd)
|
|
{
|
|
unsigned int freq;
|
|
int a, b;
|
|
|
|
a = hdmi_read(sd, 0x06);
|
|
b = hdmi_read(sd, 0x3b);
|
|
if (a < 0 || b < 0)
|
|
return 0;
|
|
freq = a * 1000000 + ((b & 0x30) >> 4) * 250000;
|
|
|
|
if (is_hdmi(sd)) {
|
|
/* adjust for deep color mode */
|
|
unsigned bits_per_channel = ((hdmi_read(sd, 0x0b) & 0x60) >> 4) + 8;
|
|
|
|
freq = freq * 8 / bits_per_channel;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
static unsigned int adv7611_read_hdmi_pixelclock(struct v4l2_subdev *sd)
|
|
{
|
|
int a, b;
|
|
|
|
a = hdmi_read(sd, 0x51);
|
|
b = hdmi_read(sd, 0x52);
|
|
if (a < 0 || b < 0)
|
|
return 0;
|
|
return ((a << 1) | (b >> 7)) * 1000000 + (b & 0x7f) * 1000000 / 128;
|
|
}
|
|
|
|
static int adv76xx_query_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
struct v4l2_bt_timings *bt = &timings->bt;
|
|
struct stdi_readback stdi;
|
|
|
|
if (!timings)
|
|
return -EINVAL;
|
|
|
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
|
|
|
if (no_signal(sd)) {
|
|
state->restart_stdi_once = true;
|
|
v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__);
|
|
return -ENOLINK;
|
|
}
|
|
|
|
/* read STDI */
|
|
if (read_stdi(sd, &stdi)) {
|
|
v4l2_dbg(1, debug, sd, "%s: STDI/SSPD not locked\n", __func__);
|
|
return -ENOLINK;
|
|
}
|
|
bt->interlaced = stdi.interlaced ?
|
|
V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE;
|
|
|
|
if (is_digital_input(sd)) {
|
|
bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
|
|
u8 vic = 0;
|
|
u32 w, h;
|
|
|
|
w = hdmi_read16(sd, 0x07, info->linewidth_mask);
|
|
h = hdmi_read16(sd, 0x09, info->field0_height_mask);
|
|
|
|
if (hdmi_signal && (io_read(sd, 0x60) & 1))
|
|
vic = infoframe_read(sd, 0x04);
|
|
|
|
if (vic && v4l2_find_dv_timings_cea861_vic(timings, vic) &&
|
|
bt->width == w && bt->height == h)
|
|
goto found;
|
|
|
|
timings->type = V4L2_DV_BT_656_1120;
|
|
|
|
bt->width = w;
|
|
bt->height = h;
|
|
bt->pixelclock = info->read_hdmi_pixelclock(sd);
|
|
bt->hfrontporch = hdmi_read16(sd, 0x20, info->hfrontporch_mask);
|
|
bt->hsync = hdmi_read16(sd, 0x22, info->hsync_mask);
|
|
bt->hbackporch = hdmi_read16(sd, 0x24, info->hbackporch_mask);
|
|
bt->vfrontporch = hdmi_read16(sd, 0x2a,
|
|
info->field0_vfrontporch_mask) / 2;
|
|
bt->vsync = hdmi_read16(sd, 0x2e, info->field0_vsync_mask) / 2;
|
|
bt->vbackporch = hdmi_read16(sd, 0x32,
|
|
info->field0_vbackporch_mask) / 2;
|
|
bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) |
|
|
((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0);
|
|
if (bt->interlaced == V4L2_DV_INTERLACED) {
|
|
bt->height += hdmi_read16(sd, 0x0b,
|
|
info->field1_height_mask);
|
|
bt->il_vfrontporch = hdmi_read16(sd, 0x2c,
|
|
info->field1_vfrontporch_mask) / 2;
|
|
bt->il_vsync = hdmi_read16(sd, 0x30,
|
|
info->field1_vsync_mask) / 2;
|
|
bt->il_vbackporch = hdmi_read16(sd, 0x34,
|
|
info->field1_vbackporch_mask) / 2;
|
|
}
|
|
adv76xx_fill_optional_dv_timings_fields(sd, timings);
|
|
} else {
|
|
/* find format
|
|
* Since LCVS values are inaccurate [REF_03, p. 275-276],
|
|
* stdi2dv_timings() is called with lcvs +-1 if the first attempt fails.
|
|
*/
|
|
if (!stdi2dv_timings(sd, &stdi, timings))
|
|
goto found;
|
|
stdi.lcvs += 1;
|
|
v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs);
|
|
if (!stdi2dv_timings(sd, &stdi, timings))
|
|
goto found;
|
|
stdi.lcvs -= 2;
|
|
v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs);
|
|
if (stdi2dv_timings(sd, &stdi, timings)) {
|
|
/*
|
|
* The STDI block may measure wrong values, especially
|
|
* for lcvs and lcf. If the driver can not find any
|
|
* valid timing, the STDI block is restarted to measure
|
|
* the video timings again. The function will return an
|
|
* error, but the restart of STDI will generate a new
|
|
* STDI interrupt and the format detection process will
|
|
* restart.
|
|
*/
|
|
if (state->restart_stdi_once) {
|
|
v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__);
|
|
/* TODO restart STDI for Sync Channel 2 */
|
|
/* enter one-shot mode */
|
|
cp_write_clr_set(sd, 0x86, 0x06, 0x00);
|
|
/* trigger STDI restart */
|
|
cp_write_clr_set(sd, 0x86, 0x06, 0x04);
|
|
/* reset to continuous mode */
|
|
cp_write_clr_set(sd, 0x86, 0x06, 0x02);
|
|
state->restart_stdi_once = false;
|
|
return -ENOLINK;
|
|
}
|
|
v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__);
|
|
return -ERANGE;
|
|
}
|
|
state->restart_stdi_once = true;
|
|
}
|
|
found:
|
|
|
|
if (no_signal(sd)) {
|
|
v4l2_dbg(1, debug, sd, "%s: signal lost during readout\n", __func__);
|
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
|
return -ENOLINK;
|
|
}
|
|
|
|
if ((is_analog_input(sd) && bt->pixelclock > 170000000) ||
|
|
(is_digital_input(sd) && bt->pixelclock > 225000000)) {
|
|
v4l2_dbg(1, debug, sd, "%s: pixelclock out of range %d\n",
|
|
__func__, (u32)bt->pixelclock);
|
|
return -ERANGE;
|
|
}
|
|
|
|
if (debug > 1)
|
|
v4l2_print_dv_timings(sd->name, "adv76xx_query_dv_timings: ",
|
|
timings, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_s_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
struct v4l2_bt_timings *bt;
|
|
int err;
|
|
|
|
if (!timings)
|
|
return -EINVAL;
|
|
|
|
if (v4l2_match_dv_timings(&state->timings, timings, 0, false)) {
|
|
v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
bt = &timings->bt;
|
|
|
|
if (!v4l2_valid_dv_timings(timings, adv76xx_get_dv_timings_cap(sd, -1),
|
|
adv76xx_check_dv_timings, NULL))
|
|
return -ERANGE;
|
|
|
|
adv76xx_fill_optional_dv_timings_fields(sd, timings);
|
|
|
|
state->timings = *timings;
|
|
|
|
cp_write_clr_set(sd, 0x91, 0x40, bt->interlaced ? 0x40 : 0x00);
|
|
|
|
/* Use prim_mode and vid_std when available */
|
|
err = configure_predefined_video_timings(sd, timings);
|
|
if (err) {
|
|
/* custom settings when the video format
|
|
does not have prim_mode/vid_std */
|
|
configure_custom_video_timings(sd, bt);
|
|
}
|
|
|
|
set_rgb_quantization_range(sd);
|
|
|
|
if (debug > 1)
|
|
v4l2_print_dv_timings(sd->name, "adv76xx_s_dv_timings: ",
|
|
timings, true);
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_g_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
*timings = state->timings;
|
|
return 0;
|
|
}
|
|
|
|
static void adv7604_set_termination(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
hdmi_write(sd, 0x01, enable ? 0x00 : 0x78);
|
|
}
|
|
|
|
static void adv7611_set_termination(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
hdmi_write(sd, 0x83, enable ? 0xfe : 0xff);
|
|
}
|
|
|
|
static void enable_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if (is_analog_input(sd)) {
|
|
io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */
|
|
} else if (is_digital_input(sd)) {
|
|
hdmi_write_clr_set(sd, 0x00, 0x03, state->selected_input);
|
|
state->info->set_termination(sd, true);
|
|
io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */
|
|
hdmi_write_clr_set(sd, 0x1a, 0x10, 0x00); /* Unmute audio */
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
}
|
|
}
|
|
|
|
static void disable_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
hdmi_write_clr_set(sd, 0x1a, 0x10, 0x10); /* Mute audio */
|
|
msleep(16); /* 512 samples with >= 32 kHz sample rate [REF_03, c. 7.16.10] */
|
|
io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */
|
|
state->info->set_termination(sd, false);
|
|
}
|
|
|
|
static void select_input(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
|
|
if (is_analog_input(sd)) {
|
|
adv76xx_write_reg_seq(sd, info->recommended_settings[0]);
|
|
|
|
afe_write(sd, 0x00, 0x08); /* power up ADC */
|
|
afe_write(sd, 0x01, 0x06); /* power up Analog Front End */
|
|
afe_write(sd, 0xc8, 0x00); /* phase control */
|
|
} else if (is_digital_input(sd)) {
|
|
hdmi_write(sd, 0x00, state->selected_input & 0x03);
|
|
|
|
adv76xx_write_reg_seq(sd, info->recommended_settings[1]);
|
|
|
|
if (adv76xx_has_afe(state)) {
|
|
afe_write(sd, 0x00, 0xff); /* power down ADC */
|
|
afe_write(sd, 0x01, 0xfe); /* power down Analog Front End */
|
|
afe_write(sd, 0xc8, 0x40); /* phase control */
|
|
}
|
|
|
|
cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */
|
|
cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */
|
|
cp_write(sd, 0x40, 0x80); /* CP core pre-gain control. Graphics mode */
|
|
} else {
|
|
v4l2_dbg(2, debug, sd, "%s: Unknown port %d selected\n",
|
|
__func__, state->selected_input);
|
|
}
|
|
}
|
|
|
|
static int adv76xx_s_routing(struct v4l2_subdev *sd,
|
|
u32 input, u32 output, u32 config)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: input %d, selected input %d",
|
|
__func__, input, state->selected_input);
|
|
|
|
if (input == state->selected_input)
|
|
return 0;
|
|
|
|
if (input > state->info->max_port)
|
|
return -EINVAL;
|
|
|
|
state->selected_input = input;
|
|
|
|
disable_input(sd);
|
|
select_input(sd);
|
|
enable_input(sd);
|
|
|
|
v4l2_subdev_notify_event(sd, &adv76xx_ev_fmt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if (code->index >= state->info->nformats)
|
|
return -EINVAL;
|
|
|
|
code->code = state->info->formats[code->index].code;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void adv76xx_fill_format(struct adv76xx_state *state,
|
|
struct v4l2_mbus_framefmt *format)
|
|
{
|
|
memset(format, 0, sizeof(*format));
|
|
|
|
format->width = state->timings.bt.width;
|
|
format->height = state->timings.bt.height;
|
|
format->field = V4L2_FIELD_NONE;
|
|
format->colorspace = V4L2_COLORSPACE_SRGB;
|
|
|
|
if (state->timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO)
|
|
format->colorspace = (state->timings.bt.height <= 576) ?
|
|
V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709;
|
|
}
|
|
|
|
/*
|
|
* Compute the op_ch_sel value required to obtain on the bus the component order
|
|
* corresponding to the selected format taking into account bus reordering
|
|
* applied by the board at the output of the device.
|
|
*
|
|
* The following table gives the op_ch_value from the format component order
|
|
* (expressed as op_ch_sel value in column) and the bus reordering (expressed as
|
|
* adv76xx_bus_order value in row).
|
|
*
|
|
* | GBR(0) GRB(1) BGR(2) RGB(3) BRG(4) RBG(5)
|
|
* ----------+-------------------------------------------------
|
|
* RGB (NOP) | GBR GRB BGR RGB BRG RBG
|
|
* GRB (1-2) | BGR RGB GBR GRB RBG BRG
|
|
* RBG (2-3) | GRB GBR BRG RBG BGR RGB
|
|
* BGR (1-3) | RBG BRG RGB BGR GRB GBR
|
|
* BRG (ROR) | BRG RBG GRB GBR RGB BGR
|
|
* GBR (ROL) | RGB BGR RBG BRG GBR GRB
|
|
*/
|
|
static unsigned int adv76xx_op_ch_sel(struct adv76xx_state *state)
|
|
{
|
|
#define _SEL(a,b,c,d,e,f) { \
|
|
ADV76XX_OP_CH_SEL_##a, ADV76XX_OP_CH_SEL_##b, ADV76XX_OP_CH_SEL_##c, \
|
|
ADV76XX_OP_CH_SEL_##d, ADV76XX_OP_CH_SEL_##e, ADV76XX_OP_CH_SEL_##f }
|
|
#define _BUS(x) [ADV7604_BUS_ORDER_##x]
|
|
|
|
static const unsigned int op_ch_sel[6][6] = {
|
|
_BUS(RGB) /* NOP */ = _SEL(GBR, GRB, BGR, RGB, BRG, RBG),
|
|
_BUS(GRB) /* 1-2 */ = _SEL(BGR, RGB, GBR, GRB, RBG, BRG),
|
|
_BUS(RBG) /* 2-3 */ = _SEL(GRB, GBR, BRG, RBG, BGR, RGB),
|
|
_BUS(BGR) /* 1-3 */ = _SEL(RBG, BRG, RGB, BGR, GRB, GBR),
|
|
_BUS(BRG) /* ROR */ = _SEL(BRG, RBG, GRB, GBR, RGB, BGR),
|
|
_BUS(GBR) /* ROL */ = _SEL(RGB, BGR, RBG, BRG, GBR, GRB),
|
|
};
|
|
|
|
return op_ch_sel[state->pdata.bus_order][state->format->op_ch_sel >> 5];
|
|
}
|
|
|
|
static void adv76xx_setup_format(struct adv76xx_state *state)
|
|
{
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
|
|
io_write_clr_set(sd, 0x02, 0x02,
|
|
state->format->rgb_out ? ADV76XX_RGB_OUT : 0);
|
|
io_write(sd, 0x03, state->format->op_format_sel |
|
|
state->pdata.op_format_mode_sel);
|
|
io_write_clr_set(sd, 0x04, 0xe0, adv76xx_op_ch_sel(state));
|
|
io_write_clr_set(sd, 0x05, 0x01,
|
|
state->format->swap_cb_cr ? ADV76XX_OP_SWAP_CB_CR : 0);
|
|
set_rgb_quantization_range(sd);
|
|
}
|
|
|
|
static int adv76xx_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if (format->pad != state->source_pad)
|
|
return -EINVAL;
|
|
|
|
adv76xx_fill_format(state, &format->format);
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
|
|
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
|
|
format->format.code = fmt->code;
|
|
} else {
|
|
format->format.code = state->format->code;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return -EINVAL;
|
|
/* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported */
|
|
if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS)
|
|
return -EINVAL;
|
|
|
|
sel->r.left = 0;
|
|
sel->r.top = 0;
|
|
sel->r.width = state->timings.bt.width;
|
|
sel->r.height = state->timings.bt.height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_format_info *info;
|
|
|
|
if (format->pad != state->source_pad)
|
|
return -EINVAL;
|
|
|
|
info = adv76xx_format_info(state, format->format.code);
|
|
if (!info)
|
|
info = adv76xx_format_info(state, MEDIA_BUS_FMT_YUYV8_2X8);
|
|
|
|
adv76xx_fill_format(state, &format->format);
|
|
format->format.code = info->code;
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
struct v4l2_mbus_framefmt *fmt;
|
|
|
|
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
|
|
fmt->code = format->format.code;
|
|
} else {
|
|
state->format = info;
|
|
adv76xx_setup_format(state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
|
|
static void adv76xx_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
if ((cec_read(sd, 0x11) & 0x01) == 0) {
|
|
v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
|
|
return;
|
|
}
|
|
|
|
if (tx_raw_status & 0x02) {
|
|
v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
|
|
__func__);
|
|
cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST,
|
|
1, 0, 0, 0);
|
|
return;
|
|
}
|
|
if (tx_raw_status & 0x04) {
|
|
u8 status;
|
|
u8 nack_cnt;
|
|
u8 low_drive_cnt;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
|
|
/*
|
|
* We set this status bit since this hardware performs
|
|
* retransmissions.
|
|
*/
|
|
status = CEC_TX_STATUS_MAX_RETRIES;
|
|
nack_cnt = cec_read(sd, 0x14) & 0xf;
|
|
if (nack_cnt)
|
|
status |= CEC_TX_STATUS_NACK;
|
|
low_drive_cnt = cec_read(sd, 0x14) >> 4;
|
|
if (low_drive_cnt)
|
|
status |= CEC_TX_STATUS_LOW_DRIVE;
|
|
cec_transmit_done(state->cec_adap, status,
|
|
0, nack_cnt, low_drive_cnt, 0);
|
|
return;
|
|
}
|
|
if (tx_raw_status & 0x01) {
|
|
v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
|
|
cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void adv76xx_cec_isr(struct v4l2_subdev *sd, bool *handled)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
u8 cec_irq;
|
|
|
|
/* cec controller */
|
|
cec_irq = io_read(sd, 0x4d) & 0x0f;
|
|
if (!cec_irq)
|
|
return;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
|
|
adv76xx_cec_tx_raw_status(sd, cec_irq);
|
|
if (cec_irq & 0x08) {
|
|
struct cec_msg msg;
|
|
|
|
msg.len = cec_read(sd, 0x25) & 0x1f;
|
|
if (msg.len > 16)
|
|
msg.len = 16;
|
|
|
|
if (msg.len) {
|
|
u8 i;
|
|
|
|
for (i = 0; i < msg.len; i++)
|
|
msg.msg[i] = cec_read(sd, i + 0x15);
|
|
cec_write(sd, 0x26, 0x01); /* re-enable rx */
|
|
cec_received_msg(state->cec_adap, &msg);
|
|
}
|
|
}
|
|
|
|
/* note: the bit order is swapped between 0x4d and 0x4e */
|
|
cec_irq = ((cec_irq & 0x08) >> 3) | ((cec_irq & 0x04) >> 1) |
|
|
((cec_irq & 0x02) << 1) | ((cec_irq & 0x01) << 3);
|
|
io_write(sd, 0x4e, cec_irq);
|
|
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
static int adv76xx_cec_adap_enable(struct cec_adapter *adap, bool enable)
|
|
{
|
|
struct adv76xx_state *state = cec_get_drvdata(adap);
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
|
|
if (!state->cec_enabled_adap && enable) {
|
|
cec_write_clr_set(sd, 0x2a, 0x01, 0x01); /* power up cec */
|
|
cec_write(sd, 0x2c, 0x01); /* cec soft reset */
|
|
cec_write_clr_set(sd, 0x11, 0x01, 0); /* initially disable tx */
|
|
/* enabled irqs: */
|
|
/* tx: ready */
|
|
/* tx: arbitration lost */
|
|
/* tx: retry timeout */
|
|
/* rx: ready */
|
|
io_write_clr_set(sd, 0x50, 0x0f, 0x0f);
|
|
cec_write(sd, 0x26, 0x01); /* enable rx */
|
|
} else if (state->cec_enabled_adap && !enable) {
|
|
/* disable cec interrupts */
|
|
io_write_clr_set(sd, 0x50, 0x0f, 0x00);
|
|
/* disable address mask 1-3 */
|
|
cec_write_clr_set(sd, 0x27, 0x70, 0x00);
|
|
/* power down cec section */
|
|
cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
|
|
state->cec_valid_addrs = 0;
|
|
}
|
|
state->cec_enabled_adap = enable;
|
|
adv76xx_s_detect_tx_5v_ctrl(sd);
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
|
|
{
|
|
struct adv76xx_state *state = cec_get_drvdata(adap);
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
unsigned int i, free_idx = ADV76XX_MAX_ADDRS;
|
|
|
|
if (!state->cec_enabled_adap)
|
|
return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO;
|
|
|
|
if (addr == CEC_LOG_ADDR_INVALID) {
|
|
cec_write_clr_set(sd, 0x27, 0x70, 0);
|
|
state->cec_valid_addrs = 0;
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
|
|
bool is_valid = state->cec_valid_addrs & (1 << i);
|
|
|
|
if (free_idx == ADV76XX_MAX_ADDRS && !is_valid)
|
|
free_idx = i;
|
|
if (is_valid && state->cec_addr[i] == addr)
|
|
return 0;
|
|
}
|
|
if (i == ADV76XX_MAX_ADDRS) {
|
|
i = free_idx;
|
|
if (i == ADV76XX_MAX_ADDRS)
|
|
return -ENXIO;
|
|
}
|
|
state->cec_addr[i] = addr;
|
|
state->cec_valid_addrs |= 1 << i;
|
|
|
|
switch (i) {
|
|
case 0:
|
|
/* enable address mask 0 */
|
|
cec_write_clr_set(sd, 0x27, 0x10, 0x10);
|
|
/* set address for mask 0 */
|
|
cec_write_clr_set(sd, 0x28, 0x0f, addr);
|
|
break;
|
|
case 1:
|
|
/* enable address mask 1 */
|
|
cec_write_clr_set(sd, 0x27, 0x20, 0x20);
|
|
/* set address for mask 1 */
|
|
cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
|
|
break;
|
|
case 2:
|
|
/* enable address mask 2 */
|
|
cec_write_clr_set(sd, 0x27, 0x40, 0x40);
|
|
/* set address for mask 1 */
|
|
cec_write_clr_set(sd, 0x29, 0x0f, addr);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
|
|
u32 signal_free_time, struct cec_msg *msg)
|
|
{
|
|
struct adv76xx_state *state = cec_get_drvdata(adap);
|
|
struct v4l2_subdev *sd = &state->sd;
|
|
u8 len = msg->len;
|
|
unsigned int i;
|
|
|
|
/*
|
|
* The number of retries is the number of attempts - 1, but retry
|
|
* at least once. It's not clear if a value of 0 is allowed, so
|
|
* let's do at least one retry.
|
|
*/
|
|
cec_write_clr_set(sd, 0x12, 0x70, max(1, attempts - 1) << 4);
|
|
|
|
if (len > 16) {
|
|
v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* write data */
|
|
for (i = 0; i < len; i++)
|
|
cec_write(sd, i, msg->msg[i]);
|
|
|
|
/* set length (data + header) */
|
|
cec_write(sd, 0x10, len);
|
|
/* start transmit, enable tx */
|
|
cec_write(sd, 0x11, 0x01);
|
|
return 0;
|
|
}
|
|
|
|
static const struct cec_adap_ops adv76xx_cec_adap_ops = {
|
|
.adap_enable = adv76xx_cec_adap_enable,
|
|
.adap_log_addr = adv76xx_cec_adap_log_addr,
|
|
.adap_transmit = adv76xx_cec_adap_transmit,
|
|
};
|
|
#endif
|
|
|
|
static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
const u8 irq_reg_0x43 = io_read(sd, 0x43);
|
|
const u8 irq_reg_0x6b = io_read(sd, 0x6b);
|
|
const u8 irq_reg_0x70 = io_read(sd, 0x70);
|
|
u8 fmt_change_digital;
|
|
u8 fmt_change;
|
|
u8 tx_5v;
|
|
|
|
if (irq_reg_0x43)
|
|
io_write(sd, 0x44, irq_reg_0x43);
|
|
if (irq_reg_0x70)
|
|
io_write(sd, 0x71, irq_reg_0x70);
|
|
if (irq_reg_0x6b)
|
|
io_write(sd, 0x6c, irq_reg_0x6b);
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: ", __func__);
|
|
|
|
/* format change */
|
|
fmt_change = irq_reg_0x43 & 0x98;
|
|
fmt_change_digital = is_digital_input(sd)
|
|
? irq_reg_0x6b & info->fmt_change_digital_mask
|
|
: 0;
|
|
|
|
if (fmt_change || fmt_change_digital) {
|
|
v4l2_dbg(1, debug, sd,
|
|
"%s: fmt_change = 0x%x, fmt_change_digital = 0x%x\n",
|
|
__func__, fmt_change, fmt_change_digital);
|
|
|
|
v4l2_subdev_notify_event(sd, &adv76xx_ev_fmt);
|
|
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
/* HDMI/DVI mode */
|
|
if (irq_reg_0x6b & 0x01) {
|
|
v4l2_dbg(1, debug, sd, "%s: irq %s mode\n", __func__,
|
|
(io_read(sd, 0x6a) & 0x01) ? "HDMI" : "DVI");
|
|
set_rgb_quantization_range(sd);
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
|
|
/* cec */
|
|
adv76xx_cec_isr(sd, handled);
|
|
#endif
|
|
|
|
/* tx 5v detect */
|
|
tx_5v = irq_reg_0x70 & info->cable_det_mask;
|
|
if (tx_5v) {
|
|
v4l2_dbg(1, debug, sd, "%s: tx_5v: 0x%x\n", __func__, tx_5v);
|
|
adv76xx_s_detect_tx_5v_ctrl(sd);
|
|
if (handled)
|
|
*handled = true;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
u8 *data = NULL;
|
|
|
|
memset(edid->reserved, 0, sizeof(edid->reserved));
|
|
|
|
switch (edid->pad) {
|
|
case ADV76XX_PAD_HDMI_PORT_A:
|
|
case ADV7604_PAD_HDMI_PORT_B:
|
|
case ADV7604_PAD_HDMI_PORT_C:
|
|
case ADV7604_PAD_HDMI_PORT_D:
|
|
if (state->edid.present & (1 << edid->pad))
|
|
data = state->edid.edid;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (edid->start_block == 0 && edid->blocks == 0) {
|
|
edid->blocks = data ? state->edid.blocks : 0;
|
|
return 0;
|
|
}
|
|
|
|
if (!data)
|
|
return -ENODATA;
|
|
|
|
if (edid->start_block >= state->edid.blocks)
|
|
return -EINVAL;
|
|
|
|
if (edid->start_block + edid->blocks > state->edid.blocks)
|
|
edid->blocks = state->edid.blocks - edid->start_block;
|
|
|
|
memcpy(edid->edid, data + edid->start_block * 128, edid->blocks * 128);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
unsigned int spa_loc;
|
|
u16 pa;
|
|
int err;
|
|
int i;
|
|
|
|
memset(edid->reserved, 0, sizeof(edid->reserved));
|
|
|
|
if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
|
|
return -EINVAL;
|
|
if (edid->start_block != 0)
|
|
return -EINVAL;
|
|
if (edid->blocks == 0) {
|
|
/* Disable hotplug and I2C access to EDID RAM from DDC port */
|
|
state->edid.present &= ~(1 << edid->pad);
|
|
adv76xx_set_hpd(state, state->edid.present);
|
|
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, state->edid.present);
|
|
|
|
/* Fall back to a 16:9 aspect ratio */
|
|
state->aspect_ratio.numerator = 16;
|
|
state->aspect_ratio.denominator = 9;
|
|
|
|
if (!state->edid.present)
|
|
state->edid.blocks = 0;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: clear EDID pad %d, edid.present = 0x%x\n",
|
|
__func__, edid->pad, state->edid.present);
|
|
return 0;
|
|
}
|
|
if (edid->blocks > 2) {
|
|
edid->blocks = 2;
|
|
return -E2BIG;
|
|
}
|
|
pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
|
|
err = cec_phys_addr_validate(pa, &pa, NULL);
|
|
if (err)
|
|
return err;
|
|
|
|
v4l2_dbg(2, debug, sd, "%s: write EDID pad %d, edid.present = 0x%x\n",
|
|
__func__, edid->pad, state->edid.present);
|
|
|
|
/* Disable hotplug and I2C access to EDID RAM from DDC port */
|
|
cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
|
|
adv76xx_set_hpd(state, 0);
|
|
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, 0x00);
|
|
|
|
/*
|
|
* Return an error if no location of the source physical address
|
|
* was found.
|
|
*/
|
|
if (spa_loc == 0)
|
|
return -EINVAL;
|
|
|
|
switch (edid->pad) {
|
|
case ADV76XX_PAD_HDMI_PORT_A:
|
|
state->spa_port_a[0] = edid->edid[spa_loc];
|
|
state->spa_port_a[1] = edid->edid[spa_loc + 1];
|
|
break;
|
|
case ADV7604_PAD_HDMI_PORT_B:
|
|
rep_write(sd, 0x70, edid->edid[spa_loc]);
|
|
rep_write(sd, 0x71, edid->edid[spa_loc + 1]);
|
|
break;
|
|
case ADV7604_PAD_HDMI_PORT_C:
|
|
rep_write(sd, 0x72, edid->edid[spa_loc]);
|
|
rep_write(sd, 0x73, edid->edid[spa_loc + 1]);
|
|
break;
|
|
case ADV7604_PAD_HDMI_PORT_D:
|
|
rep_write(sd, 0x74, edid->edid[spa_loc]);
|
|
rep_write(sd, 0x75, edid->edid[spa_loc + 1]);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (info->type == ADV7604) {
|
|
rep_write(sd, 0x76, spa_loc & 0xff);
|
|
rep_write_clr_set(sd, 0x77, 0x40, (spa_loc & 0x100) >> 2);
|
|
} else {
|
|
/* ADV7612 Software Manual Rev. A, p. 15 */
|
|
rep_write(sd, 0x70, spa_loc & 0xff);
|
|
rep_write_clr_set(sd, 0x71, 0x01, (spa_loc & 0x100) >> 8);
|
|
}
|
|
|
|
edid->edid[spa_loc] = state->spa_port_a[0];
|
|
edid->edid[spa_loc + 1] = state->spa_port_a[1];
|
|
|
|
memcpy(state->edid.edid, edid->edid, 128 * edid->blocks);
|
|
state->edid.blocks = edid->blocks;
|
|
state->aspect_ratio = v4l2_calc_aspect_ratio(edid->edid[0x15],
|
|
edid->edid[0x16]);
|
|
state->edid.present |= 1 << edid->pad;
|
|
|
|
err = edid_write_block(sd, 128 * edid->blocks, state->edid.edid);
|
|
if (err < 0) {
|
|
v4l2_err(sd, "error %d writing edid pad %d\n", err, edid->pad);
|
|
return err;
|
|
}
|
|
|
|
/* adv76xx calculates the checksums and enables I2C access to internal
|
|
EDID RAM from DDC port. */
|
|
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, state->edid.present);
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
if (rep_read(sd, info->edid_status_reg) & state->edid.present)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
if (i == 1000) {
|
|
v4l2_err(sd, "error enabling edid (0x%x)\n", state->edid.present);
|
|
return -EIO;
|
|
}
|
|
cec_s_phys_addr(state->cec_adap, pa, false);
|
|
|
|
/* enable hotplug after 100 ms */
|
|
schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 10);
|
|
return 0;
|
|
}
|
|
|
|
/*********** avi info frame CEA-861-E **************/
|
|
|
|
static const struct adv76xx_cfg_read_infoframe adv76xx_cri[] = {
|
|
{ "AVI", 0x01, 0xe0, 0x00 },
|
|
{ "Audio", 0x02, 0xe3, 0x1c },
|
|
{ "SDP", 0x04, 0xe6, 0x2a },
|
|
{ "Vendor", 0x10, 0xec, 0x54 }
|
|
};
|
|
|
|
static int adv76xx_read_infoframe(struct v4l2_subdev *sd, int index,
|
|
union hdmi_infoframe *frame)
|
|
{
|
|
uint8_t buffer[32];
|
|
u8 len;
|
|
int i;
|
|
|
|
if (!(io_read(sd, 0x60) & adv76xx_cri[index].present_mask)) {
|
|
v4l2_info(sd, "%s infoframe not received\n",
|
|
adv76xx_cri[index].desc);
|
|
return -ENOENT;
|
|
}
|
|
|
|
for (i = 0; i < 3; i++)
|
|
buffer[i] = infoframe_read(sd,
|
|
adv76xx_cri[index].head_addr + i);
|
|
|
|
len = buffer[2] + 1;
|
|
|
|
if (len + 3 > sizeof(buffer)) {
|
|
v4l2_err(sd, "%s: invalid %s infoframe length %d\n", __func__,
|
|
adv76xx_cri[index].desc, len);
|
|
return -ENOENT;
|
|
}
|
|
|
|
for (i = 0; i < len; i++)
|
|
buffer[i + 3] = infoframe_read(sd,
|
|
adv76xx_cri[index].payload_addr + i);
|
|
|
|
if (hdmi_infoframe_unpack(frame, buffer) < 0) {
|
|
v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__,
|
|
adv76xx_cri[index].desc);
|
|
return -ENOENT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void adv76xx_log_infoframes(struct v4l2_subdev *sd)
|
|
{
|
|
int i;
|
|
|
|
if (!is_hdmi(sd)) {
|
|
v4l2_info(sd, "receive DVI-D signal, no infoframes\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adv76xx_cri); i++) {
|
|
union hdmi_infoframe frame;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (adv76xx_read_infoframe(sd, i, &frame))
|
|
return;
|
|
hdmi_infoframe_log(KERN_INFO, &client->dev, &frame);
|
|
}
|
|
}
|
|
|
|
static int adv76xx_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
struct v4l2_dv_timings timings;
|
|
struct stdi_readback stdi;
|
|
u8 reg_io_0x02 = io_read(sd, 0x02);
|
|
u8 edid_enabled;
|
|
u8 cable_det;
|
|
|
|
static const char * const csc_coeff_sel_rb[16] = {
|
|
"bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB",
|
|
"reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709",
|
|
"reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709",
|
|
"reserved", "reserved", "reserved", "reserved", "manual"
|
|
};
|
|
static const char * const input_color_space_txt[16] = {
|
|
"RGB limited range (16-235)", "RGB full range (0-255)",
|
|
"YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)",
|
|
"xvYCC Bt.601", "xvYCC Bt.709",
|
|
"YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)",
|
|
"invalid", "invalid", "invalid", "invalid", "invalid",
|
|
"invalid", "invalid", "automatic"
|
|
};
|
|
static const char * const hdmi_color_space_txt[16] = {
|
|
"RGB limited range (16-235)", "RGB full range (0-255)",
|
|
"YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)",
|
|
"xvYCC Bt.601", "xvYCC Bt.709",
|
|
"YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)",
|
|
"sYCC", "Adobe YCC 601", "AdobeRGB", "invalid", "invalid",
|
|
"invalid", "invalid", "invalid"
|
|
};
|
|
static const char * const rgb_quantization_range_txt[] = {
|
|
"Automatic",
|
|
"RGB limited range (16-235)",
|
|
"RGB full range (0-255)",
|
|
};
|
|
static const char * const deep_color_mode_txt[4] = {
|
|
"8-bits per channel",
|
|
"10-bits per channel",
|
|
"12-bits per channel",
|
|
"16-bits per channel (not supported)"
|
|
};
|
|
|
|
v4l2_info(sd, "-----Chip status-----\n");
|
|
v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on");
|
|
edid_enabled = rep_read(sd, info->edid_status_reg);
|
|
v4l2_info(sd, "EDID enabled port A: %s, B: %s, C: %s, D: %s\n",
|
|
((edid_enabled & 0x01) ? "Yes" : "No"),
|
|
((edid_enabled & 0x02) ? "Yes" : "No"),
|
|
((edid_enabled & 0x04) ? "Yes" : "No"),
|
|
((edid_enabled & 0x08) ? "Yes" : "No"));
|
|
v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
|
|
"enabled" : "disabled");
|
|
if (state->cec_enabled_adap) {
|
|
int i;
|
|
|
|
for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
|
|
bool is_valid = state->cec_valid_addrs & (1 << i);
|
|
|
|
if (is_valid)
|
|
v4l2_info(sd, "CEC Logical Address: 0x%x\n",
|
|
state->cec_addr[i]);
|
|
}
|
|
}
|
|
|
|
v4l2_info(sd, "-----Signal status-----\n");
|
|
cable_det = info->read_cable_det(sd);
|
|
v4l2_info(sd, "Cable detected (+5V power) port A: %s, B: %s, C: %s, D: %s\n",
|
|
((cable_det & 0x01) ? "Yes" : "No"),
|
|
((cable_det & 0x02) ? "Yes" : "No"),
|
|
((cable_det & 0x04) ? "Yes" : "No"),
|
|
((cable_det & 0x08) ? "Yes" : "No"));
|
|
v4l2_info(sd, "TMDS signal detected: %s\n",
|
|
no_signal_tmds(sd) ? "false" : "true");
|
|
v4l2_info(sd, "TMDS signal locked: %s\n",
|
|
no_lock_tmds(sd) ? "false" : "true");
|
|
v4l2_info(sd, "SSPD locked: %s\n", no_lock_sspd(sd) ? "false" : "true");
|
|
v4l2_info(sd, "STDI locked: %s\n", no_lock_stdi(sd) ? "false" : "true");
|
|
v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true");
|
|
v4l2_info(sd, "CP free run: %s\n",
|
|
(in_free_run(sd)) ? "on" : "off");
|
|
v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n",
|
|
io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f,
|
|
(io_read(sd, 0x01) & 0x70) >> 4);
|
|
|
|
v4l2_info(sd, "-----Video Timings-----\n");
|
|
if (read_stdi(sd, &stdi))
|
|
v4l2_info(sd, "STDI: not locked\n");
|
|
else
|
|
v4l2_info(sd, "STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %s, %chsync, %cvsync\n",
|
|
stdi.lcf, stdi.bl, stdi.lcvs,
|
|
stdi.interlaced ? "interlaced" : "progressive",
|
|
stdi.hs_pol, stdi.vs_pol);
|
|
if (adv76xx_query_dv_timings(sd, &timings))
|
|
v4l2_info(sd, "No video detected\n");
|
|
else
|
|
v4l2_print_dv_timings(sd->name, "Detected format: ",
|
|
&timings, true);
|
|
v4l2_print_dv_timings(sd->name, "Configured format: ",
|
|
&state->timings, true);
|
|
|
|
if (no_signal(sd))
|
|
return 0;
|
|
|
|
v4l2_info(sd, "-----Color space-----\n");
|
|
v4l2_info(sd, "RGB quantization range ctrl: %s\n",
|
|
rgb_quantization_range_txt[state->rgb_quantization_range]);
|
|
v4l2_info(sd, "Input color space: %s\n",
|
|
input_color_space_txt[reg_io_0x02 >> 4]);
|
|
v4l2_info(sd, "Output color space: %s %s, alt-gamma %s\n",
|
|
(reg_io_0x02 & 0x02) ? "RGB" : "YCbCr",
|
|
(((reg_io_0x02 >> 2) & 0x01) ^ (reg_io_0x02 & 0x01)) ?
|
|
"(16-235)" : "(0-255)",
|
|
(reg_io_0x02 & 0x08) ? "enabled" : "disabled");
|
|
v4l2_info(sd, "Color space conversion: %s\n",
|
|
csc_coeff_sel_rb[cp_read(sd, info->cp_csc) >> 4]);
|
|
|
|
if (!is_digital_input(sd))
|
|
return 0;
|
|
|
|
v4l2_info(sd, "-----%s status-----\n", is_hdmi(sd) ? "HDMI" : "DVI-D");
|
|
v4l2_info(sd, "Digital video port selected: %c\n",
|
|
(hdmi_read(sd, 0x00) & 0x03) + 'A');
|
|
v4l2_info(sd, "HDCP encrypted content: %s\n",
|
|
(hdmi_read(sd, 0x05) & 0x40) ? "true" : "false");
|
|
v4l2_info(sd, "HDCP keys read: %s%s\n",
|
|
(hdmi_read(sd, 0x04) & 0x20) ? "yes" : "no",
|
|
(hdmi_read(sd, 0x04) & 0x10) ? "ERROR" : "");
|
|
if (is_hdmi(sd)) {
|
|
bool audio_pll_locked = hdmi_read(sd, 0x04) & 0x01;
|
|
bool audio_sample_packet_detect = hdmi_read(sd, 0x18) & 0x01;
|
|
bool audio_mute = io_read(sd, 0x65) & 0x40;
|
|
|
|
v4l2_info(sd, "Audio: pll %s, samples %s, %s\n",
|
|
audio_pll_locked ? "locked" : "not locked",
|
|
audio_sample_packet_detect ? "detected" : "not detected",
|
|
audio_mute ? "muted" : "enabled");
|
|
if (audio_pll_locked && audio_sample_packet_detect) {
|
|
v4l2_info(sd, "Audio format: %s\n",
|
|
(hdmi_read(sd, 0x07) & 0x20) ? "multi-channel" : "stereo");
|
|
}
|
|
v4l2_info(sd, "Audio CTS: %u\n", (hdmi_read(sd, 0x5b) << 12) +
|
|
(hdmi_read(sd, 0x5c) << 8) +
|
|
(hdmi_read(sd, 0x5d) & 0xf0));
|
|
v4l2_info(sd, "Audio N: %u\n", ((hdmi_read(sd, 0x5d) & 0x0f) << 16) +
|
|
(hdmi_read(sd, 0x5e) << 8) +
|
|
hdmi_read(sd, 0x5f));
|
|
v4l2_info(sd, "AV Mute: %s\n", (hdmi_read(sd, 0x04) & 0x40) ? "on" : "off");
|
|
|
|
v4l2_info(sd, "Deep color mode: %s\n", deep_color_mode_txt[(hdmi_read(sd, 0x0b) & 0x60) >> 5]);
|
|
v4l2_info(sd, "HDMI colorspace: %s\n", hdmi_color_space_txt[hdmi_read(sd, 0x53) & 0xf]);
|
|
|
|
adv76xx_log_infoframes(sd);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv76xx_subscribe_event(struct v4l2_subdev *sd,
|
|
struct v4l2_fh *fh,
|
|
struct v4l2_event_subscription *sub)
|
|
{
|
|
switch (sub->type) {
|
|
case V4L2_EVENT_SOURCE_CHANGE:
|
|
return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
|
|
case V4L2_EVENT_CTRL:
|
|
return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int adv76xx_registered(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int err;
|
|
|
|
err = cec_register_adapter(state->cec_adap, &client->dev);
|
|
if (err)
|
|
cec_delete_adapter(state->cec_adap);
|
|
return err;
|
|
}
|
|
|
|
static void adv76xx_unregistered(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
cec_unregister_adapter(state->cec_adap);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_ctrl_ops adv76xx_ctrl_ops = {
|
|
.s_ctrl = adv76xx_s_ctrl,
|
|
.g_volatile_ctrl = adv76xx_g_volatile_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops adv76xx_core_ops = {
|
|
.log_status = adv76xx_log_status,
|
|
.interrupt_service_routine = adv76xx_isr,
|
|
.subscribe_event = adv76xx_subscribe_event,
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = adv76xx_g_register,
|
|
.s_register = adv76xx_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops adv76xx_video_ops = {
|
|
.s_routing = adv76xx_s_routing,
|
|
.g_input_status = adv76xx_g_input_status,
|
|
.s_dv_timings = adv76xx_s_dv_timings,
|
|
.g_dv_timings = adv76xx_g_dv_timings,
|
|
.query_dv_timings = adv76xx_query_dv_timings,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops adv76xx_pad_ops = {
|
|
.enum_mbus_code = adv76xx_enum_mbus_code,
|
|
.get_selection = adv76xx_get_selection,
|
|
.get_fmt = adv76xx_get_format,
|
|
.set_fmt = adv76xx_set_format,
|
|
.get_edid = adv76xx_get_edid,
|
|
.set_edid = adv76xx_set_edid,
|
|
.dv_timings_cap = adv76xx_dv_timings_cap,
|
|
.enum_dv_timings = adv76xx_enum_dv_timings,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops adv76xx_ops = {
|
|
.core = &adv76xx_core_ops,
|
|
.video = &adv76xx_video_ops,
|
|
.pad = &adv76xx_pad_ops,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops adv76xx_int_ops = {
|
|
.registered = adv76xx_registered,
|
|
.unregistered = adv76xx_unregistered,
|
|
};
|
|
|
|
/* -------------------------- custom ctrls ---------------------------------- */
|
|
|
|
static const struct v4l2_ctrl_config adv7604_ctrl_analog_sampling_phase = {
|
|
.ops = &adv76xx_ctrl_ops,
|
|
.id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE,
|
|
.name = "Analog Sampling Phase",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0,
|
|
.max = 0x1f,
|
|
.step = 1,
|
|
.def = 0,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config adv76xx_ctrl_free_run_color_manual = {
|
|
.ops = &adv76xx_ctrl_ops,
|
|
.id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL,
|
|
.name = "Free Running Color, Manual",
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.min = false,
|
|
.max = true,
|
|
.step = 1,
|
|
.def = false,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config adv76xx_ctrl_free_run_color = {
|
|
.ops = &adv76xx_ctrl_ops,
|
|
.id = V4L2_CID_ADV_RX_FREE_RUN_COLOR,
|
|
.name = "Free Running Color",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0x0,
|
|
.max = 0xffffff,
|
|
.step = 0x1,
|
|
.def = 0x0,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
struct adv76xx_register_map {
|
|
const char *name;
|
|
u8 default_addr;
|
|
};
|
|
|
|
static const struct adv76xx_register_map adv76xx_default_addresses[] = {
|
|
[ADV76XX_PAGE_IO] = { "main", 0x4c },
|
|
[ADV7604_PAGE_AVLINK] = { "avlink", 0x42 },
|
|
[ADV76XX_PAGE_CEC] = { "cec", 0x40 },
|
|
[ADV76XX_PAGE_INFOFRAME] = { "infoframe", 0x3e },
|
|
[ADV7604_PAGE_ESDP] = { "esdp", 0x38 },
|
|
[ADV7604_PAGE_DPP] = { "dpp", 0x3c },
|
|
[ADV76XX_PAGE_AFE] = { "afe", 0x26 },
|
|
[ADV76XX_PAGE_REP] = { "rep", 0x32 },
|
|
[ADV76XX_PAGE_EDID] = { "edid", 0x36 },
|
|
[ADV76XX_PAGE_HDMI] = { "hdmi", 0x34 },
|
|
[ADV76XX_PAGE_TEST] = { "test", 0x30 },
|
|
[ADV76XX_PAGE_CP] = { "cp", 0x22 },
|
|
[ADV7604_PAGE_VDP] = { "vdp", 0x24 },
|
|
};
|
|
|
|
static int adv76xx_core_init(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv76xx_state *state = to_state(sd);
|
|
const struct adv76xx_chip_info *info = state->info;
|
|
struct adv76xx_platform_data *pdata = &state->pdata;
|
|
|
|
hdmi_write(sd, 0x48,
|
|
(pdata->disable_pwrdnb ? 0x80 : 0) |
|
|
(pdata->disable_cable_det_rst ? 0x40 : 0));
|
|
|
|
disable_input(sd);
|
|
|
|
if (pdata->default_input >= 0 &&
|
|
pdata->default_input < state->source_pad) {
|
|
state->selected_input = pdata->default_input;
|
|
select_input(sd);
|
|
enable_input(sd);
|
|
}
|
|
|
|
/* power */
|
|
io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */
|
|
io_write(sd, 0x0b, 0x44); /* Power down ESDP block */
|
|
cp_write(sd, 0xcf, 0x01); /* Power down macrovision */
|
|
|
|
/* video format */
|
|
io_write_clr_set(sd, 0x02, 0x0f, pdata->alt_gamma << 3);
|
|
io_write_clr_set(sd, 0x05, 0x0e, pdata->blank_data << 3 |
|
|
pdata->insert_av_codes << 2 |
|
|
pdata->replicate_av_codes << 1);
|
|
adv76xx_setup_format(state);
|
|
|
|
cp_write(sd, 0x69, 0x30); /* Enable CP CSC */
|
|
|
|
/* VS, HS polarities */
|
|
io_write(sd, 0x06, 0xa0 | pdata->inv_vs_pol << 2 |
|
|
pdata->inv_hs_pol << 1 | pdata->inv_llc_pol);
|
|
|
|
/* Adjust drive strength */
|
|
io_write(sd, 0x14, 0x40 | pdata->dr_str_data << 4 |
|
|
pdata->dr_str_clk << 2 |
|
|
pdata->dr_str_sync);
|
|
|
|
cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */
|
|
cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */
|
|
cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold -
|
|
ADI recommended setting [REF_01, c. 2.3.3] */
|
|
cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold -
|
|
ADI recommended setting [REF_01, c. 2.3.3] */
|
|
cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution
|
|
for digital formats */
|
|
|
|
/* HDMI audio */
|
|
hdmi_write_clr_set(sd, 0x15, 0x03, 0x03); /* Mute on FIFO over-/underflow [REF_01, c. 1.2.18] */
|
|
hdmi_write_clr_set(sd, 0x1a, 0x0e, 0x08); /* Wait 1 s before unmute */
|
|
hdmi_write_clr_set(sd, 0x68, 0x06, 0x06); /* FIFO reset on over-/underflow [REF_01, c. 1.2.19] */
|
|
|
|
/* TODO from platform data */
|
|
afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */
|
|
|
|
if (adv76xx_has_afe(state)) {
|
|
afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */
|
|
io_write_clr_set(sd, 0x30, 1 << 4, pdata->output_bus_lsb_to_msb << 4);
|
|
}
|
|
|
|
/* interrupts */
|
|
io_write(sd, 0x40, 0xc0 | pdata->int1_config); /* Configure INT1 */
|
|
io_write(sd, 0x46, 0x98); /* Enable SSPD, STDI and CP unlocked interrupts */
|
|
io_write(sd, 0x6e, info->fmt_change_digital_mask); /* Enable V_LOCKED and DE_REGEN_LCK interrupts */
|
|
io_write(sd, 0x73, info->cable_det_mask); /* Enable cable detection (+5v) interrupts */
|
|
info->setup_irqs(sd);
|
|
|
|
return v4l2_ctrl_handler_setup(sd->ctrl_handler);
|
|
}
|
|
|
|
static void adv7604_setup_irqs(struct v4l2_subdev *sd)
|
|
{
|
|
io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */
|
|
}
|
|
|
|
static void adv7611_setup_irqs(struct v4l2_subdev *sd)
|
|
{
|
|
io_write(sd, 0x41, 0xd0); /* STDI irq for any change, disable INT2 */
|
|
}
|
|
|
|
static void adv7612_setup_irqs(struct v4l2_subdev *sd)
|
|
{
|
|
io_write(sd, 0x41, 0xd0); /* disable INT2 */
|
|
}
|
|
|
|
static void adv76xx_unregister_clients(struct adv76xx_state *state)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i) {
|
|
if (state->i2c_clients[i])
|
|
i2c_unregister_device(state->i2c_clients[i]);
|
|
}
|
|
}
|
|
|
|
static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
|
|
unsigned int page)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct adv76xx_state *state = to_state(sd);
|
|
struct adv76xx_platform_data *pdata = &state->pdata;
|
|
unsigned int io_reg = 0xf2 + page;
|
|
struct i2c_client *new_client;
|
|
|
|
if (pdata && pdata->i2c_addresses[page])
|
|
new_client = i2c_new_dummy(client->adapter,
|
|
pdata->i2c_addresses[page]);
|
|
else
|
|
new_client = i2c_new_secondary_device(client,
|
|
adv76xx_default_addresses[page].name,
|
|
adv76xx_default_addresses[page].default_addr);
|
|
|
|
if (new_client)
|
|
io_write(sd, io_reg, new_client->addr << 1);
|
|
|
|
return new_client;
|
|
}
|
|
|
|
static const struct adv76xx_reg_seq adv7604_recommended_settings_afe[] = {
|
|
/* reset ADI recommended settings for HDMI: */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x0d), 0x04 }, /* HDMI filter optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x0d), 0x04 }, /* HDMI filter optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x3d), 0x00 }, /* DDC bus active pull-up control */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x3e), 0x74 }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x4e), 0x3b }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x57), 0x74 }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x58), 0x63 }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x8d), 0x18 }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x8e), 0x34 }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x93), 0x88 }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x94), 0x2e }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x96), 0x00 }, /* enable automatic EQ changing */
|
|
|
|
/* set ADI recommended settings for digitizer */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_AFE, 0x12), 0x7b }, /* ADC noise shaping filter controls */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_AFE, 0x0c), 0x1f }, /* CP core gain controls */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_CP, 0x3e), 0x04 }, /* CP core pre-gain control */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_CP, 0xc3), 0x39 }, /* CP coast control. Graphics mode */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_CP, 0x40), 0x5c }, /* CP core pre-gain control. Graphics mode */
|
|
|
|
{ ADV76XX_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv76xx_reg_seq adv7604_recommended_settings_hdmi[] = {
|
|
/* set ADI recommended settings for HDMI: */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x0d), 0x84 }, /* HDMI filter optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x3d), 0x10 }, /* DDC bus active pull-up control */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x3e), 0x39 }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x4e), 0x3b }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x57), 0xb6 }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x58), 0x03 }, /* TMDS PLL optimization */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x8d), 0x18 }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x8e), 0x34 }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x93), 0x8b }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x94), 0x2d }, /* equaliser */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x96), 0x01 }, /* enable automatic EQ changing */
|
|
|
|
/* reset ADI recommended settings for digitizer */
|
|
/* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 17. */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_AFE, 0x12), 0xfb }, /* ADC noise shaping filter controls */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_AFE, 0x0c), 0x0d }, /* CP core gain controls */
|
|
|
|
{ ADV76XX_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv76xx_reg_seq adv7611_recommended_settings_hdmi[] = {
|
|
/* ADV7611 Register Settings Recommendations Rev 1.5, May 2014 */
|
|
{ ADV76XX_REG(ADV76XX_PAGE_CP, 0x6c), 0x00 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x9b), 0x03 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x6f), 0x08 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x85), 0x1f },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x87), 0x70 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x57), 0xda },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x58), 0x01 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x03), 0x98 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x4c), 0x44 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x8d), 0x04 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x8e), 0x1e },
|
|
|
|
{ ADV76XX_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv76xx_reg_seq adv7612_recommended_settings_hdmi[] = {
|
|
{ ADV76XX_REG(ADV76XX_PAGE_CP, 0x6c), 0x00 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x9b), 0x03 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x6f), 0x08 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x85), 0x1f },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x87), 0x70 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x57), 0xda },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x58), 0x01 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x03), 0x98 },
|
|
{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x4c), 0x44 },
|
|
{ ADV76XX_REG_SEQ_TERM, 0 },
|
|
};
|
|
|
|
static const struct adv76xx_chip_info adv76xx_chip_info[] = {
|
|
[ADV7604] = {
|
|
.type = ADV7604,
|
|
.has_afe = true,
|
|
.max_port = ADV7604_PAD_VGA_COMP,
|
|
.num_dv_ports = 4,
|
|
.edid_enable_reg = 0x77,
|
|
.edid_status_reg = 0x7d,
|
|
.lcf_reg = 0xb3,
|
|
.tdms_lock_mask = 0xe0,
|
|
.cable_det_mask = 0x1e,
|
|
.fmt_change_digital_mask = 0xc1,
|
|
.cp_csc = 0xfc,
|
|
.formats = adv7604_formats,
|
|
.nformats = ARRAY_SIZE(adv7604_formats),
|
|
.set_termination = adv7604_set_termination,
|
|
.setup_irqs = adv7604_setup_irqs,
|
|
.read_hdmi_pixelclock = adv7604_read_hdmi_pixelclock,
|
|
.read_cable_det = adv7604_read_cable_det,
|
|
.recommended_settings = {
|
|
[0] = adv7604_recommended_settings_afe,
|
|
[1] = adv7604_recommended_settings_hdmi,
|
|
},
|
|
.num_recommended_settings = {
|
|
[0] = ARRAY_SIZE(adv7604_recommended_settings_afe),
|
|
[1] = ARRAY_SIZE(adv7604_recommended_settings_hdmi),
|
|
},
|
|
.page_mask = BIT(ADV76XX_PAGE_IO) | BIT(ADV7604_PAGE_AVLINK) |
|
|
BIT(ADV76XX_PAGE_CEC) | BIT(ADV76XX_PAGE_INFOFRAME) |
|
|
BIT(ADV7604_PAGE_ESDP) | BIT(ADV7604_PAGE_DPP) |
|
|
BIT(ADV76XX_PAGE_AFE) | BIT(ADV76XX_PAGE_REP) |
|
|
BIT(ADV76XX_PAGE_EDID) | BIT(ADV76XX_PAGE_HDMI) |
|
|
BIT(ADV76XX_PAGE_TEST) | BIT(ADV76XX_PAGE_CP) |
|
|
BIT(ADV7604_PAGE_VDP),
|
|
.linewidth_mask = 0xfff,
|
|
.field0_height_mask = 0xfff,
|
|
.field1_height_mask = 0xfff,
|
|
.hfrontporch_mask = 0x3ff,
|
|
.hsync_mask = 0x3ff,
|
|
.hbackporch_mask = 0x3ff,
|
|
.field0_vfrontporch_mask = 0x1fff,
|
|
.field0_vsync_mask = 0x1fff,
|
|
.field0_vbackporch_mask = 0x1fff,
|
|
.field1_vfrontporch_mask = 0x1fff,
|
|
.field1_vsync_mask = 0x1fff,
|
|
.field1_vbackporch_mask = 0x1fff,
|
|
},
|
|
[ADV7611] = {
|
|
.type = ADV7611,
|
|
.has_afe = false,
|
|
.max_port = ADV76XX_PAD_HDMI_PORT_A,
|
|
.num_dv_ports = 1,
|
|
.edid_enable_reg = 0x74,
|
|
.edid_status_reg = 0x76,
|
|
.lcf_reg = 0xa3,
|
|
.tdms_lock_mask = 0x43,
|
|
.cable_det_mask = 0x01,
|
|
.fmt_change_digital_mask = 0x03,
|
|
.cp_csc = 0xf4,
|
|
.formats = adv7611_formats,
|
|
.nformats = ARRAY_SIZE(adv7611_formats),
|
|
.set_termination = adv7611_set_termination,
|
|
.setup_irqs = adv7611_setup_irqs,
|
|
.read_hdmi_pixelclock = adv7611_read_hdmi_pixelclock,
|
|
.read_cable_det = adv7611_read_cable_det,
|
|
.recommended_settings = {
|
|
[1] = adv7611_recommended_settings_hdmi,
|
|
},
|
|
.num_recommended_settings = {
|
|
[1] = ARRAY_SIZE(adv7611_recommended_settings_hdmi),
|
|
},
|
|
.page_mask = BIT(ADV76XX_PAGE_IO) | BIT(ADV76XX_PAGE_CEC) |
|
|
BIT(ADV76XX_PAGE_INFOFRAME) | BIT(ADV76XX_PAGE_AFE) |
|
|
BIT(ADV76XX_PAGE_REP) | BIT(ADV76XX_PAGE_EDID) |
|
|
BIT(ADV76XX_PAGE_HDMI) | BIT(ADV76XX_PAGE_CP),
|
|
.linewidth_mask = 0x1fff,
|
|
.field0_height_mask = 0x1fff,
|
|
.field1_height_mask = 0x1fff,
|
|
.hfrontporch_mask = 0x1fff,
|
|
.hsync_mask = 0x1fff,
|
|
.hbackporch_mask = 0x1fff,
|
|
.field0_vfrontporch_mask = 0x3fff,
|
|
.field0_vsync_mask = 0x3fff,
|
|
.field0_vbackporch_mask = 0x3fff,
|
|
.field1_vfrontporch_mask = 0x3fff,
|
|
.field1_vsync_mask = 0x3fff,
|
|
.field1_vbackporch_mask = 0x3fff,
|
|
},
|
|
[ADV7612] = {
|
|
.type = ADV7612,
|
|
.has_afe = false,
|
|
.max_port = ADV76XX_PAD_HDMI_PORT_A, /* B not supported */
|
|
.num_dv_ports = 1, /* normally 2 */
|
|
.edid_enable_reg = 0x74,
|
|
.edid_status_reg = 0x76,
|
|
.lcf_reg = 0xa3,
|
|
.tdms_lock_mask = 0x43,
|
|
.cable_det_mask = 0x01,
|
|
.fmt_change_digital_mask = 0x03,
|
|
.cp_csc = 0xf4,
|
|
.formats = adv7612_formats,
|
|
.nformats = ARRAY_SIZE(adv7612_formats),
|
|
.set_termination = adv7611_set_termination,
|
|
.setup_irqs = adv7612_setup_irqs,
|
|
.read_hdmi_pixelclock = adv7611_read_hdmi_pixelclock,
|
|
.read_cable_det = adv7612_read_cable_det,
|
|
.recommended_settings = {
|
|
[1] = adv7612_recommended_settings_hdmi,
|
|
},
|
|
.num_recommended_settings = {
|
|
[1] = ARRAY_SIZE(adv7612_recommended_settings_hdmi),
|
|
},
|
|
.page_mask = BIT(ADV76XX_PAGE_IO) | BIT(ADV76XX_PAGE_CEC) |
|
|
BIT(ADV76XX_PAGE_INFOFRAME) | BIT(ADV76XX_PAGE_AFE) |
|
|
BIT(ADV76XX_PAGE_REP) | BIT(ADV76XX_PAGE_EDID) |
|
|
BIT(ADV76XX_PAGE_HDMI) | BIT(ADV76XX_PAGE_CP),
|
|
.linewidth_mask = 0x1fff,
|
|
.field0_height_mask = 0x1fff,
|
|
.field1_height_mask = 0x1fff,
|
|
.hfrontporch_mask = 0x1fff,
|
|
.hsync_mask = 0x1fff,
|
|
.hbackporch_mask = 0x1fff,
|
|
.field0_vfrontporch_mask = 0x3fff,
|
|
.field0_vsync_mask = 0x3fff,
|
|
.field0_vbackporch_mask = 0x3fff,
|
|
.field1_vfrontporch_mask = 0x3fff,
|
|
.field1_vsync_mask = 0x3fff,
|
|
.field1_vbackporch_mask = 0x3fff,
|
|
},
|
|
};
|
|
|
|
static const struct i2c_device_id adv76xx_i2c_id[] = {
|
|
{ "adv7604", (kernel_ulong_t)&adv76xx_chip_info[ADV7604] },
|
|
{ "adv7611", (kernel_ulong_t)&adv76xx_chip_info[ADV7611] },
|
|
{ "adv7612", (kernel_ulong_t)&adv76xx_chip_info[ADV7612] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adv76xx_i2c_id);
|
|
|
|
static const struct of_device_id adv76xx_of_id[] __maybe_unused = {
|
|
{ .compatible = "adi,adv7611", .data = &adv76xx_chip_info[ADV7611] },
|
|
{ .compatible = "adi,adv7612", .data = &adv76xx_chip_info[ADV7612] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adv76xx_of_id);
|
|
|
|
static int adv76xx_parse_dt(struct adv76xx_state *state)
|
|
{
|
|
struct v4l2_fwnode_endpoint bus_cfg;
|
|
struct device_node *endpoint;
|
|
struct device_node *np;
|
|
unsigned int flags;
|
|
int ret;
|
|
u32 v;
|
|
|
|
np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
|
|
|
|
/* Parse the endpoint. */
|
|
endpoint = of_graph_get_next_endpoint(np, NULL);
|
|
if (!endpoint)
|
|
return -EINVAL;
|
|
|
|
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), &bus_cfg);
|
|
of_node_put(endpoint);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!of_property_read_u32(np, "default-input", &v))
|
|
state->pdata.default_input = v;
|
|
else
|
|
state->pdata.default_input = -1;
|
|
|
|
flags = bus_cfg.bus.parallel.flags;
|
|
|
|
if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
|
|
state->pdata.inv_hs_pol = 1;
|
|
|
|
if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
|
|
state->pdata.inv_vs_pol = 1;
|
|
|
|
if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
|
|
state->pdata.inv_llc_pol = 1;
|
|
|
|
if (bus_cfg.bus_type == V4L2_MBUS_BT656)
|
|
state->pdata.insert_av_codes = 1;
|
|
|
|
/* Disable the interrupt for now as no DT-based board uses it. */
|
|
state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED;
|
|
|
|
/* Hardcode the remaining platform data fields. */
|
|
state->pdata.disable_pwrdnb = 0;
|
|
state->pdata.disable_cable_det_rst = 0;
|
|
state->pdata.blank_data = 1;
|
|
state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0;
|
|
state->pdata.bus_order = ADV7604_BUS_ORDER_RGB;
|
|
state->pdata.dr_str_data = ADV76XX_DR_STR_MEDIUM_HIGH;
|
|
state->pdata.dr_str_clk = ADV76XX_DR_STR_MEDIUM_HIGH;
|
|
state->pdata.dr_str_sync = ADV76XX_DR_STR_MEDIUM_HIGH;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config adv76xx_regmap_cnf[] = {
|
|
{
|
|
.name = "io",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "avlink",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "cec",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "infoframe",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "esdp",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "epp",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "afe",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "rep",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "edid",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
|
|
{
|
|
.name = "hdmi",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "test",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "cp",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
{
|
|
.name = "vdp",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = 0xff,
|
|
.cache_type = REGCACHE_NONE,
|
|
},
|
|
};
|
|
|
|
static int configure_regmap(struct adv76xx_state *state, int region)
|
|
{
|
|
int err;
|
|
|
|
if (!state->i2c_clients[region])
|
|
return -ENODEV;
|
|
|
|
state->regmap[region] =
|
|
devm_regmap_init_i2c(state->i2c_clients[region],
|
|
&adv76xx_regmap_cnf[region]);
|
|
|
|
if (IS_ERR(state->regmap[region])) {
|
|
err = PTR_ERR(state->regmap[region]);
|
|
v4l_err(state->i2c_clients[region],
|
|
"Error initializing regmap %d with error %d\n",
|
|
region, err);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int configure_regmaps(struct adv76xx_state *state)
|
|
{
|
|
int i, err;
|
|
|
|
for (i = ADV7604_PAGE_AVLINK ; i < ADV76XX_PAGE_MAX; i++) {
|
|
err = configure_regmap(state, i);
|
|
if (err && (err != -ENODEV))
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void adv76xx_reset(struct adv76xx_state *state)
|
|
{
|
|
if (state->reset_gpio) {
|
|
/* ADV76XX can be reset by a low reset pulse of minimum 5 ms. */
|
|
gpiod_set_value_cansleep(state->reset_gpio, 0);
|
|
usleep_range(5000, 10000);
|
|
gpiod_set_value_cansleep(state->reset_gpio, 1);
|
|
/* It is recommended to wait 5 ms after the low pulse before */
|
|
/* an I2C write is performed to the ADV76XX. */
|
|
usleep_range(5000, 10000);
|
|
}
|
|
}
|
|
|
|
static int adv76xx_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
static const struct v4l2_dv_timings cea640x480 =
|
|
V4L2_DV_BT_CEA_640X480P59_94;
|
|
struct adv76xx_state *state;
|
|
struct v4l2_ctrl_handler *hdl;
|
|
struct v4l2_ctrl *ctrl;
|
|
struct v4l2_subdev *sd;
|
|
unsigned int i;
|
|
unsigned int val, val2;
|
|
int err;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
v4l_dbg(1, debug, client, "detecting adv76xx client on address 0x%x\n",
|
|
client->addr << 1);
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->i2c_clients[ADV76XX_PAGE_IO] = client;
|
|
|
|
/* initialize variables */
|
|
state->restart_stdi_once = true;
|
|
state->selected_input = ~0;
|
|
|
|
if (IS_ENABLED(CONFIG_OF) && client->dev.of_node) {
|
|
const struct of_device_id *oid;
|
|
|
|
oid = of_match_node(adv76xx_of_id, client->dev.of_node);
|
|
state->info = oid->data;
|
|
|
|
err = adv76xx_parse_dt(state);
|
|
if (err < 0) {
|
|
v4l_err(client, "DT parsing error\n");
|
|
return err;
|
|
}
|
|
} else if (client->dev.platform_data) {
|
|
struct adv76xx_platform_data *pdata = client->dev.platform_data;
|
|
|
|
state->info = (const struct adv76xx_chip_info *)id->driver_data;
|
|
state->pdata = *pdata;
|
|
} else {
|
|
v4l_err(client, "No platform data!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Request GPIOs. */
|
|
for (i = 0; i < state->info->num_dv_ports; ++i) {
|
|
state->hpd_gpio[i] =
|
|
devm_gpiod_get_index_optional(&client->dev, "hpd", i,
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(state->hpd_gpio[i]))
|
|
return PTR_ERR(state->hpd_gpio[i]);
|
|
|
|
if (state->hpd_gpio[i])
|
|
v4l_info(client, "Handling HPD %u GPIO\n", i);
|
|
}
|
|
state->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(state->reset_gpio))
|
|
return PTR_ERR(state->reset_gpio);
|
|
|
|
adv76xx_reset(state);
|
|
|
|
state->timings = cea640x480;
|
|
state->format = adv76xx_format_info(state, MEDIA_BUS_FMT_YUYV8_2X8);
|
|
|
|
sd = &state->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &adv76xx_ops);
|
|
snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
|
|
id->name, i2c_adapter_id(client->adapter),
|
|
client->addr);
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
sd->internal_ops = &adv76xx_int_ops;
|
|
|
|
/* Configure IO Regmap region */
|
|
err = configure_regmap(state, ADV76XX_PAGE_IO);
|
|
|
|
if (err) {
|
|
v4l2_err(sd, "Error configuring IO regmap region\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Verify that the chip is present. On ADV7604 the RD_INFO register only
|
|
* identifies the revision, while on ADV7611 it identifies the model as
|
|
* well. Use the HDMI slave address on ADV7604 and RD_INFO on ADV7611.
|
|
*/
|
|
switch (state->info->type) {
|
|
case ADV7604:
|
|
err = regmap_read(state->regmap[ADV76XX_PAGE_IO], 0xfb, &val);
|
|
if (err) {
|
|
v4l2_err(sd, "Error %d reading IO Regmap\n", err);
|
|
return -ENODEV;
|
|
}
|
|
if (val != 0x68) {
|
|
v4l2_err(sd, "not an adv7604 on address 0x%x\n",
|
|
client->addr << 1);
|
|
return -ENODEV;
|
|
}
|
|
break;
|
|
case ADV7611:
|
|
case ADV7612:
|
|
err = regmap_read(state->regmap[ADV76XX_PAGE_IO],
|
|
0xea,
|
|
&val);
|
|
if (err) {
|
|
v4l2_err(sd, "Error %d reading IO Regmap\n", err);
|
|
return -ENODEV;
|
|
}
|
|
val2 = val << 8;
|
|
err = regmap_read(state->regmap[ADV76XX_PAGE_IO],
|
|
0xeb,
|
|
&val);
|
|
if (err) {
|
|
v4l2_err(sd, "Error %d reading IO Regmap\n", err);
|
|
return -ENODEV;
|
|
}
|
|
val |= val2;
|
|
if ((state->info->type == ADV7611 && val != 0x2051) ||
|
|
(state->info->type == ADV7612 && val != 0x2041)) {
|
|
v4l2_err(sd, "not an adv761x on address 0x%x\n",
|
|
client->addr << 1);
|
|
return -ENODEV;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* control handlers */
|
|
hdl = &state->hdl;
|
|
v4l2_ctrl_handler_init(hdl, adv76xx_has_afe(state) ? 9 : 8);
|
|
|
|
v4l2_ctrl_new_std(hdl, &adv76xx_ctrl_ops,
|
|
V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
|
|
v4l2_ctrl_new_std(hdl, &adv76xx_ctrl_ops,
|
|
V4L2_CID_CONTRAST, 0, 255, 1, 128);
|
|
v4l2_ctrl_new_std(hdl, &adv76xx_ctrl_ops,
|
|
V4L2_CID_SATURATION, 0, 255, 1, 128);
|
|
v4l2_ctrl_new_std(hdl, &adv76xx_ctrl_ops,
|
|
V4L2_CID_HUE, 0, 128, 1, 0);
|
|
ctrl = v4l2_ctrl_new_std_menu(hdl, &adv76xx_ctrl_ops,
|
|
V4L2_CID_DV_RX_IT_CONTENT_TYPE, V4L2_DV_IT_CONTENT_TYPE_NO_ITC,
|
|
0, V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
|
|
if (ctrl)
|
|
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
|
|
|
|
state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL,
|
|
V4L2_CID_DV_RX_POWER_PRESENT, 0,
|
|
(1 << state->info->num_dv_ports) - 1, 0, 0);
|
|
state->rgb_quantization_range_ctrl =
|
|
v4l2_ctrl_new_std_menu(hdl, &adv76xx_ctrl_ops,
|
|
V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
|
|
0, V4L2_DV_RGB_RANGE_AUTO);
|
|
|
|
/* custom controls */
|
|
if (adv76xx_has_afe(state))
|
|
state->analog_sampling_phase_ctrl =
|
|
v4l2_ctrl_new_custom(hdl, &adv7604_ctrl_analog_sampling_phase, NULL);
|
|
state->free_run_color_manual_ctrl =
|
|
v4l2_ctrl_new_custom(hdl, &adv76xx_ctrl_free_run_color_manual, NULL);
|
|
state->free_run_color_ctrl =
|
|
v4l2_ctrl_new_custom(hdl, &adv76xx_ctrl_free_run_color, NULL);
|
|
|
|
sd->ctrl_handler = hdl;
|
|
if (hdl->error) {
|
|
err = hdl->error;
|
|
goto err_hdl;
|
|
}
|
|
if (adv76xx_s_detect_tx_5v_ctrl(sd)) {
|
|
err = -ENODEV;
|
|
goto err_hdl;
|
|
}
|
|
|
|
for (i = 1; i < ADV76XX_PAGE_MAX; ++i) {
|
|
if (!(BIT(i) & state->info->page_mask))
|
|
continue;
|
|
|
|
state->i2c_clients[i] = adv76xx_dummy_client(sd, i);
|
|
if (!state->i2c_clients[i]) {
|
|
err = -EINVAL;
|
|
v4l2_err(sd, "failed to create i2c client %u\n", i);
|
|
goto err_i2c;
|
|
}
|
|
}
|
|
|
|
INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug,
|
|
adv76xx_delayed_work_enable_hotplug);
|
|
|
|
state->source_pad = state->info->num_dv_ports
|
|
+ (state->info->has_afe ? 2 : 0);
|
|
for (i = 0; i < state->source_pad; ++i)
|
|
state->pads[i].flags = MEDIA_PAD_FL_SINK;
|
|
state->pads[state->source_pad].flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_DV_DECODER;
|
|
|
|
err = media_entity_pads_init(&sd->entity, state->source_pad + 1,
|
|
state->pads);
|
|
if (err)
|
|
goto err_work_queues;
|
|
|
|
/* Configure regmaps */
|
|
err = configure_regmaps(state);
|
|
if (err)
|
|
goto err_entity;
|
|
|
|
err = adv76xx_core_init(sd);
|
|
if (err)
|
|
goto err_entity;
|
|
|
|
#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
|
|
state->cec_adap = cec_allocate_adapter(&adv76xx_cec_adap_ops,
|
|
state, dev_name(&client->dev),
|
|
CEC_CAP_DEFAULTS, ADV76XX_MAX_ADDRS);
|
|
err = PTR_ERR_OR_ZERO(state->cec_adap);
|
|
if (err)
|
|
goto err_entity;
|
|
#endif
|
|
|
|
v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
err = v4l2_async_register_subdev(sd);
|
|
if (err)
|
|
goto err_entity;
|
|
|
|
return 0;
|
|
|
|
err_entity:
|
|
media_entity_cleanup(&sd->entity);
|
|
err_work_queues:
|
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
|
err_i2c:
|
|
adv76xx_unregister_clients(state);
|
|
err_hdl:
|
|
v4l2_ctrl_handler_free(hdl);
|
|
return err;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int adv76xx_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct adv76xx_state *state = to_state(sd);
|
|
|
|
/* disable interrupts */
|
|
io_write(sd, 0x40, 0);
|
|
io_write(sd, 0x41, 0);
|
|
io_write(sd, 0x46, 0);
|
|
io_write(sd, 0x6e, 0);
|
|
io_write(sd, 0x73, 0);
|
|
|
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
adv76xx_unregister_clients(to_state(sd));
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static struct i2c_driver adv76xx_driver = {
|
|
.driver = {
|
|
.name = "adv7604",
|
|
.of_match_table = of_match_ptr(adv76xx_of_id),
|
|
},
|
|
.probe = adv76xx_probe,
|
|
.remove = adv76xx_remove,
|
|
.id_table = adv76xx_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(adv76xx_driver);
|