linux/arch/m68knommu/platform/5307/config.c
Greg Ungerer 96db271ace m68knommu: platform setup for 5307 ColdFire parts
Switch to platform style configuration for 5307 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 20:55:43 +11:00

176 lines
4.5 KiB
C

/***************************************************************************/
/*
* linux/arch/m68knommu/platform/5307/config.c
*
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2000, Lineo (www.lineo.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfwdebug.h>
/***************************************************************************/
void coldfire_reset(void);
extern unsigned int mcf_timervector;
extern unsigned int mcf_profilevector;
extern unsigned int mcf_timerlevel;
/***************************************************************************/
/*
* Some platforms need software versions of the GPIO data registers.
*/
unsigned short ppdata;
unsigned char ledbank = 0xff;
/***************************************************************************/
static struct mcf_platform_uart m5307_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5307_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5307_uart_platform,
};
static struct platform_device *m5307_devices[] __initdata = {
&m5307_uart,
};
/***************************************************************************/
static void __init m5307_uart_init_line(int line, int irq)
{
if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
} else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
}
}
static void __init m5307_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5307_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5307_uart_init_line(line, m5307_uart_platform[line].irq);
}
/***************************************************************************/
void mcf_autovector(unsigned int vec)
{
volatile unsigned char *mbar;
if ((vec >= 25) && (vec <= 31)) {
mbar = (volatile unsigned char *) MCF_MBAR;
vec = 0x1 << (vec - 24);
*(mbar + MCFSIM_AVR) |= vec;
mcf_setimr(mcf_getimr() & ~vec);
}
}
/***************************************************************************/
void mcf_settimericr(unsigned int timer, unsigned int level)
{
volatile unsigned char *icrp;
unsigned int icr, imr;
if (timer <= 2) {
switch (timer) {
case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
}
icrp = (volatile unsigned char *) (MCF_MBAR + icr);
*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
mcf_setimr(mcf_getimr() & ~imr);
}
}
/***************************************************************************/
int mcf_timerirqpending(int timer)
{
unsigned int imr = 0;
switch (timer) {
case 1: imr = MCFSIM_IMR_TIMER1; break;
case 2: imr = MCFSIM_IMR_TIMER2; break;
default: break;
}
return (mcf_getipr() & imr);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
defined(CONFIG_CLEOPATRA)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0;
/* Different timer setup - to prevent device clash */
mcf_timervector = 30;
mcf_profilevector = 31;
mcf_timerlevel = 6;
#endif
mach_reset = coldfire_reset;
#ifdef CONFIG_BDM_DISABLE
/*
* Disable the BDM clocking. This also turns off most of the rest of
* the BDM device. This is good for EMC reasons. This option is not
* incompatible with the memory protection option.
*/
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
#endif
}
/***************************************************************************/
static int __init init_BSP(void)
{
m5307_uarts_init();
platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/