mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
fe31edc8a3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
182 lines
4.8 KiB
C
182 lines
4.8 KiB
C
/*
|
|
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
|
|
*
|
|
* This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
|
|
* but this keeps the ISA-Bridge and slots alive.
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
|
|
#define DRV_NAME "slc90e66"
|
|
|
|
static DEFINE_SPINLOCK(slc90e66_lock);
|
|
|
|
static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
int is_slave = drive->dn & 1;
|
|
int master_port = hwif->channel ? 0x42 : 0x40;
|
|
int slave_port = 0x44;
|
|
unsigned long flags;
|
|
u16 master_data;
|
|
u8 slave_data;
|
|
int control = 0;
|
|
const u8 pio = drive->pio_mode - XFER_PIO_0;
|
|
|
|
/* ISP RTC */
|
|
static const u8 timings[][2] = {
|
|
{ 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
spin_lock_irqsave(&slc90e66_lock, flags);
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
|
|
if (pio > 1)
|
|
control |= 1; /* Programmable timing on */
|
|
if (drive->media == ide_disk)
|
|
control |= 4; /* Prefetch, post write */
|
|
if (ide_pio_need_iordy(drive, pio))
|
|
control |= 2; /* IORDY */
|
|
if (is_slave) {
|
|
master_data |= 0x4000;
|
|
master_data &= ~0x0070;
|
|
if (pio > 1) {
|
|
/* Set PPE, IE and TIME */
|
|
master_data |= control << 4;
|
|
}
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
|
slave_data &= hwif->channel ? 0x0f : 0xf0;
|
|
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
|
|
(hwif->channel ? 4 : 0);
|
|
} else {
|
|
master_data &= ~0x3307;
|
|
if (pio > 1) {
|
|
/* enable PPE, IE and TIME */
|
|
master_data |= control;
|
|
}
|
|
master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
}
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
if (is_slave)
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
|
spin_unlock_irqrestore(&slc90e66_lock, flags);
|
|
}
|
|
|
|
static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
u8 maslave = hwif->channel ? 0x42 : 0x40;
|
|
int sitre = 0, a_speed = 7 << (drive->dn * 4);
|
|
int u_speed = 0, u_flag = 1 << drive->dn;
|
|
u16 reg4042, reg44, reg48, reg4a;
|
|
const u8 speed = drive->dma_mode;
|
|
|
|
pci_read_config_word(dev, maslave, ®4042);
|
|
sitre = (reg4042 & 0x4000) ? 1 : 0;
|
|
pci_read_config_word(dev, 0x44, ®44);
|
|
pci_read_config_word(dev, 0x48, ®48);
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
|
|
|
|
if (!(reg48 & u_flag))
|
|
pci_write_config_word(dev, 0x48, reg48|u_flag);
|
|
if ((reg4a & a_speed) != u_speed) {
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
pci_write_config_word(dev, 0x4a, reg4a|u_speed);
|
|
}
|
|
} else {
|
|
const u8 mwdma_to_pio[] = { 0, 3, 4 };
|
|
|
|
if (reg48 & u_flag)
|
|
pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
|
|
if (reg4a & a_speed)
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
|
|
if (speed >= XFER_MW_DMA_0)
|
|
drive->pio_mode =
|
|
mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0;
|
|
else
|
|
drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */
|
|
|
|
slc90e66_set_pio_mode(hwif, drive);
|
|
}
|
|
}
|
|
|
|
static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
|
|
|
|
pci_read_config_byte(dev, 0x47, ®47);
|
|
|
|
/* bit[0(1)]: 0:80, 1:40 */
|
|
return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
|
|
}
|
|
|
|
static const struct ide_port_ops slc90e66_port_ops = {
|
|
.set_pio_mode = slc90e66_set_pio_mode,
|
|
.set_dma_mode = slc90e66_set_dma_mode,
|
|
.cable_detect = slc90e66_cable_detect,
|
|
};
|
|
|
|
static const struct ide_port_info slc90e66_chipset = {
|
|
.name = DRV_NAME,
|
|
.enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
|
|
.port_ops = &slc90e66_port_ops,
|
|
.pio_mask = ATA_PIO4,
|
|
.swdma_mask = ATA_SWDMA2_ONLY,
|
|
.mwdma_mask = ATA_MWDMA12_ONLY,
|
|
.udma_mask = ATA_UDMA4,
|
|
};
|
|
|
|
static int slc90e66_init_one(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
return ide_pci_init_one(dev, &slc90e66_chipset, NULL);
|
|
}
|
|
|
|
static const struct pci_device_id slc90e66_pci_tbl[] = {
|
|
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
|
|
|
|
static struct pci_driver slc90e66_pci_driver = {
|
|
.name = "SLC90e66_IDE",
|
|
.id_table = slc90e66_pci_tbl,
|
|
.probe = slc90e66_init_one,
|
|
.remove = ide_pci_remove,
|
|
.suspend = ide_pci_suspend,
|
|
.resume = ide_pci_resume,
|
|
};
|
|
|
|
static int __init slc90e66_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&slc90e66_pci_driver);
|
|
}
|
|
|
|
static void __exit slc90e66_ide_exit(void)
|
|
{
|
|
pci_unregister_driver(&slc90e66_pci_driver);
|
|
}
|
|
|
|
module_init(slc90e66_ide_init);
|
|
module_exit(slc90e66_ide_exit);
|
|
|
|
MODULE_AUTHOR("Andre Hedrick");
|
|
MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
|
|
MODULE_LICENSE("GPL");
|