linux/arch/arm/boot/dts/exynos5260-xyref5260.dts
Shawn Lin 9d2770b8e4 ARM: dts: exynos: Remove num-slots from exynos platforms
dwmmc driver deprecated num-slots and plan to get rid
of it finally. Just move a step to cleanup it from DT.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-07-18 07:14:22 +02:00

95 lines
1.9 KiB
Plaintext

/*
* SAMSUNG XYREF5260 board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5260.dtsi"
/ {
model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x80000000>;
};
chosen {
bootargs = "console=ttySAC2,115200";
};
fin_pll: xxti {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "fin_pll";
#clock-cells = <0>;
};
xrtcxti: xrtcxti {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "xrtcxti";
#clock-cells = <0>;
};
};
&pinctrl_0 {
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&mmc_0 {
status = "okay";
broken-cd;
bypass-smu;
cap-mmc-highspeed;
supports-hs200-mode; /* 200 MHz */
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
bus-width = <8>;
};
&mmc_2 {
status = "okay";
cap-sd-highspeed;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
disable-wp;
};