mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 18:14:07 +08:00
323edb2e27
These watchdog_ops and watchdog_info structures are only stored in the ops and info fields of a watchdog_device structure, respectively, which are const. Thus make the watchdog_ops and watchdog_info structures const as well. Done with the help of Coccinelle. The rules for the watchdog_ops case are as follows: // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
317 lines
7.5 KiB
C
317 lines
7.5 KiB
C
/*
|
|
* Watchdog driver for z/VM and LPAR using the diag 288 interface.
|
|
*
|
|
* Under z/VM, expiration of the watchdog will send a "system restart" command
|
|
* to CP.
|
|
*
|
|
* The command can be altered using the module parameter "cmd". This is
|
|
* not recommended because it's only supported on z/VM but not whith LPAR.
|
|
*
|
|
* On LPAR, the watchdog will always trigger a system restart. the module
|
|
* paramter cmd is meaningless here.
|
|
*
|
|
*
|
|
* Copyright IBM Corp. 2004, 2013
|
|
* Author(s): Arnd Bergmann (arndb@de.ibm.com)
|
|
* Philipp Hachtmann (phacht@de.ibm.com)
|
|
*
|
|
*/
|
|
|
|
#define KMSG_COMPONENT "diag288_wdt"
|
|
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/suspend.h>
|
|
#include <asm/ebcdic.h>
|
|
#include <asm/diag.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#define MAX_CMDLEN 240
|
|
#define DEFAULT_CMD "SYSTEM RESTART"
|
|
|
|
#define MIN_INTERVAL 15 /* Minimal time supported by diag88 */
|
|
#define MAX_INTERVAL 3600 /* One hour should be enough - pure estimation */
|
|
|
|
#define WDT_DEFAULT_TIMEOUT 30
|
|
|
|
/* Function codes - init, change, cancel */
|
|
#define WDT_FUNC_INIT 0
|
|
#define WDT_FUNC_CHANGE 1
|
|
#define WDT_FUNC_CANCEL 2
|
|
#define WDT_FUNC_CONCEAL 0x80000000
|
|
|
|
/* Action codes for LPAR watchdog */
|
|
#define LPARWDT_RESTART 0
|
|
|
|
static char wdt_cmd[MAX_CMDLEN] = DEFAULT_CMD;
|
|
static bool conceal_on;
|
|
static bool nowayout_info = WATCHDOG_NOWAYOUT;
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
|
|
MODULE_AUTHOR("Philipp Hachtmann <phacht@de.ibm.com>");
|
|
|
|
MODULE_DESCRIPTION("System z diag288 Watchdog Timer");
|
|
|
|
module_param_string(cmd, wdt_cmd, MAX_CMDLEN, 0644);
|
|
MODULE_PARM_DESC(cmd, "CP command that is run when the watchdog triggers (z/VM only)");
|
|
|
|
module_param_named(conceal, conceal_on, bool, 0644);
|
|
MODULE_PARM_DESC(conceal, "Enable the CONCEAL CP option while the watchdog is active (z/VM only)");
|
|
|
|
module_param_named(nowayout, nowayout_info, bool, 0444);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default = CONFIG_WATCHDOG_NOWAYOUT)");
|
|
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
|
MODULE_ALIAS("vmwatchdog");
|
|
|
|
static int __diag288(unsigned int func, unsigned int timeout,
|
|
unsigned long action, unsigned int len)
|
|
{
|
|
register unsigned long __func asm("2") = func;
|
|
register unsigned long __timeout asm("3") = timeout;
|
|
register unsigned long __action asm("4") = action;
|
|
register unsigned long __len asm("5") = len;
|
|
int err;
|
|
|
|
err = -EINVAL;
|
|
asm volatile(
|
|
" diag %1, %3, 0x288\n"
|
|
"0: la %0, 0\n"
|
|
"1:\n"
|
|
EX_TABLE(0b, 1b)
|
|
: "+d" (err) : "d"(__func), "d"(__timeout),
|
|
"d"(__action), "d"(__len) : "1", "cc");
|
|
return err;
|
|
}
|
|
|
|
static int __diag288_vm(unsigned int func, unsigned int timeout,
|
|
char *cmd, size_t len)
|
|
{
|
|
diag_stat_inc(DIAG_STAT_X288);
|
|
return __diag288(func, timeout, virt_to_phys(cmd), len);
|
|
}
|
|
|
|
static int __diag288_lpar(unsigned int func, unsigned int timeout,
|
|
unsigned long action)
|
|
{
|
|
diag_stat_inc(DIAG_STAT_X288);
|
|
return __diag288(func, timeout, action, 0);
|
|
}
|
|
|
|
static unsigned long wdt_status;
|
|
|
|
#define DIAG_WDOG_BUSY 0
|
|
|
|
static int wdt_start(struct watchdog_device *dev)
|
|
{
|
|
char *ebc_cmd;
|
|
size_t len;
|
|
int ret;
|
|
unsigned int func;
|
|
|
|
if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status))
|
|
return -EBUSY;
|
|
|
|
ret = -ENODEV;
|
|
|
|
if (MACHINE_IS_VM) {
|
|
ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
|
|
if (!ebc_cmd) {
|
|
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
|
|
return -ENOMEM;
|
|
}
|
|
len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN);
|
|
ASCEBC(ebc_cmd, MAX_CMDLEN);
|
|
EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
|
|
|
|
func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL)
|
|
: WDT_FUNC_INIT;
|
|
ret = __diag288_vm(func, dev->timeout, ebc_cmd, len);
|
|
WARN_ON(ret != 0);
|
|
kfree(ebc_cmd);
|
|
} else {
|
|
ret = __diag288_lpar(WDT_FUNC_INIT,
|
|
dev->timeout, LPARWDT_RESTART);
|
|
}
|
|
|
|
if (ret) {
|
|
pr_err("The watchdog cannot be activated\n");
|
|
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_stop(struct watchdog_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
diag_stat_inc(DIAG_STAT_X288);
|
|
ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0);
|
|
|
|
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wdt_ping(struct watchdog_device *dev)
|
|
{
|
|
char *ebc_cmd;
|
|
size_t len;
|
|
int ret;
|
|
unsigned int func;
|
|
|
|
ret = -ENODEV;
|
|
|
|
if (MACHINE_IS_VM) {
|
|
ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
|
|
if (!ebc_cmd)
|
|
return -ENOMEM;
|
|
len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN);
|
|
ASCEBC(ebc_cmd, MAX_CMDLEN);
|
|
EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
|
|
|
|
/*
|
|
* It seems to be ok to z/VM to use the init function to
|
|
* retrigger the watchdog. On LPAR WDT_FUNC_CHANGE must
|
|
* be used when the watchdog is running.
|
|
*/
|
|
func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL)
|
|
: WDT_FUNC_INIT;
|
|
|
|
ret = __diag288_vm(func, dev->timeout, ebc_cmd, len);
|
|
WARN_ON(ret != 0);
|
|
kfree(ebc_cmd);
|
|
} else {
|
|
ret = __diag288_lpar(WDT_FUNC_CHANGE, dev->timeout, 0);
|
|
}
|
|
|
|
if (ret)
|
|
pr_err("The watchdog timer cannot be started or reset\n");
|
|
return ret;
|
|
}
|
|
|
|
static int wdt_set_timeout(struct watchdog_device * dev, unsigned int new_to)
|
|
{
|
|
dev->timeout = new_to;
|
|
return wdt_ping(dev);
|
|
}
|
|
|
|
static const struct watchdog_ops wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = wdt_start,
|
|
.stop = wdt_stop,
|
|
.ping = wdt_ping,
|
|
.set_timeout = wdt_set_timeout,
|
|
};
|
|
|
|
static const struct watchdog_info wdt_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
|
.firmware_version = 0,
|
|
.identity = "z Watchdog",
|
|
};
|
|
|
|
static struct watchdog_device wdt_dev = {
|
|
.parent = NULL,
|
|
.info = &wdt_info,
|
|
.ops = &wdt_ops,
|
|
.bootstatus = 0,
|
|
.timeout = WDT_DEFAULT_TIMEOUT,
|
|
.min_timeout = MIN_INTERVAL,
|
|
.max_timeout = MAX_INTERVAL,
|
|
};
|
|
|
|
/*
|
|
* It makes no sense to go into suspend while the watchdog is running.
|
|
* Depending on the memory size, the watchdog might trigger, while we
|
|
* are still saving the memory.
|
|
*/
|
|
static int wdt_suspend(void)
|
|
{
|
|
if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status)) {
|
|
pr_err("Linux cannot be suspended while the watchdog is in use\n");
|
|
return notifier_from_errno(-EBUSY);
|
|
}
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int wdt_resume(void)
|
|
{
|
|
clear_bit(DIAG_WDOG_BUSY, &wdt_status);
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int wdt_power_event(struct notifier_block *this, unsigned long event,
|
|
void *ptr)
|
|
{
|
|
switch (event) {
|
|
case PM_POST_HIBERNATION:
|
|
case PM_POST_SUSPEND:
|
|
return wdt_resume();
|
|
case PM_HIBERNATION_PREPARE:
|
|
case PM_SUSPEND_PREPARE:
|
|
return wdt_suspend();
|
|
default:
|
|
return NOTIFY_DONE;
|
|
}
|
|
}
|
|
|
|
static struct notifier_block wdt_power_notifier = {
|
|
.notifier_call = wdt_power_event,
|
|
};
|
|
|
|
static int __init diag288_init(void)
|
|
{
|
|
int ret;
|
|
char ebc_begin[] = {
|
|
194, 197, 199, 201, 213
|
|
};
|
|
|
|
watchdog_set_nowayout(&wdt_dev, nowayout_info);
|
|
|
|
if (MACHINE_IS_VM) {
|
|
if (__diag288_vm(WDT_FUNC_INIT, 15,
|
|
ebc_begin, sizeof(ebc_begin)) != 0) {
|
|
pr_err("The watchdog cannot be initialized\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
if (__diag288_lpar(WDT_FUNC_INIT, 30, LPARWDT_RESTART)) {
|
|
pr_err("The watchdog cannot be initialized\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (__diag288_lpar(WDT_FUNC_CANCEL, 0, 0)) {
|
|
pr_err("The watchdog cannot be deactivated\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = register_pm_notifier(&wdt_power_notifier);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = watchdog_register_device(&wdt_dev);
|
|
if (ret)
|
|
unregister_pm_notifier(&wdt_power_notifier);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit diag288_exit(void)
|
|
{
|
|
watchdog_unregister_device(&wdt_dev);
|
|
unregister_pm_notifier(&wdt_power_notifier);
|
|
}
|
|
|
|
module_init(diag288_init);
|
|
module_exit(diag288_exit);
|