mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
d06e46c25a
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
379 lines
9.2 KiB
C
379 lines
9.2 KiB
C
/*
|
|
* Driver for Silicon Labs Si514 Programmable Oscillator
|
|
*
|
|
* Copyright (C) 2015 Topic Embedded Products
|
|
*
|
|
* Author: Mike Looijmans <mike.looijmans@topic.nl>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* I2C registers */
|
|
#define SI514_REG_LP 0
|
|
#define SI514_REG_M_FRAC1 5
|
|
#define SI514_REG_M_FRAC2 6
|
|
#define SI514_REG_M_FRAC3 7
|
|
#define SI514_REG_M_INT_FRAC 8
|
|
#define SI514_REG_M_INT 9
|
|
#define SI514_REG_HS_DIV 10
|
|
#define SI514_REG_LS_HS_DIV 11
|
|
#define SI514_REG_OE_STATE 14
|
|
#define SI514_REG_RESET 128
|
|
#define SI514_REG_CONTROL 132
|
|
|
|
/* Register values */
|
|
#define SI514_RESET_RST BIT(7)
|
|
|
|
#define SI514_CONTROL_FCAL BIT(0)
|
|
#define SI514_CONTROL_OE BIT(2)
|
|
|
|
#define SI514_MIN_FREQ 100000U
|
|
#define SI514_MAX_FREQ 250000000U
|
|
|
|
#define FXO 31980000U
|
|
|
|
#define FVCO_MIN 2080000000U
|
|
#define FVCO_MAX 2500000000U
|
|
|
|
#define HS_DIV_MAX 1022
|
|
|
|
struct clk_si514 {
|
|
struct clk_hw hw;
|
|
struct regmap *regmap;
|
|
struct i2c_client *i2c_client;
|
|
};
|
|
#define to_clk_si514(_hw) container_of(_hw, struct clk_si514, hw)
|
|
|
|
/* Multiplier/divider settings */
|
|
struct clk_si514_muldiv {
|
|
u32 m_frac; /* 29-bit Fractional part of multiplier M */
|
|
u8 m_int; /* Integer part of multiplier M, 65..78 */
|
|
u8 ls_div_bits; /* 2nd divider, as 2^x */
|
|
u16 hs_div; /* 1st divider, must be even and 10<=x<=1022 */
|
|
};
|
|
|
|
/* Enables or disables the output driver */
|
|
static int si514_enable_output(struct clk_si514 *data, bool enable)
|
|
{
|
|
return regmap_update_bits(data->regmap, SI514_REG_CONTROL,
|
|
SI514_CONTROL_OE, enable ? SI514_CONTROL_OE : 0);
|
|
}
|
|
|
|
/* Retrieve clock multiplier and dividers from hardware */
|
|
static int si514_get_muldiv(struct clk_si514 *data,
|
|
struct clk_si514_muldiv *settings)
|
|
{
|
|
int err;
|
|
u8 reg[7];
|
|
|
|
err = regmap_bulk_read(data->regmap, SI514_REG_M_FRAC1,
|
|
reg, ARRAY_SIZE(reg));
|
|
if (err)
|
|
return err;
|
|
|
|
settings->m_frac = reg[0] | reg[1] << 8 | reg[2] << 16 |
|
|
(reg[3] & 0x1F) << 24;
|
|
settings->m_int = (reg[4] & 0x3f) << 3 | reg[3] >> 5;
|
|
settings->ls_div_bits = (reg[6] >> 4) & 0x07;
|
|
settings->hs_div = (reg[6] & 0x03) << 8 | reg[5];
|
|
return 0;
|
|
}
|
|
|
|
static int si514_set_muldiv(struct clk_si514 *data,
|
|
struct clk_si514_muldiv *settings)
|
|
{
|
|
u8 lp;
|
|
u8 reg[7];
|
|
int err;
|
|
|
|
/* Calculate LP1/LP2 according to table 13 in the datasheet */
|
|
/* 65.259980246 */
|
|
if (settings->m_int < 65 ||
|
|
(settings->m_int == 65 && settings->m_frac <= 139575831))
|
|
lp = 0x22;
|
|
/* 67.859763463 */
|
|
else if (settings->m_int < 67 ||
|
|
(settings->m_int == 67 && settings->m_frac <= 461581994))
|
|
lp = 0x23;
|
|
/* 72.937624981 */
|
|
else if (settings->m_int < 72 ||
|
|
(settings->m_int == 72 && settings->m_frac <= 503383578))
|
|
lp = 0x33;
|
|
/* 75.843265046 */
|
|
else if (settings->m_int < 75 ||
|
|
(settings->m_int == 75 && settings->m_frac <= 452724474))
|
|
lp = 0x34;
|
|
else
|
|
lp = 0x44;
|
|
|
|
err = regmap_write(data->regmap, SI514_REG_LP, lp);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
reg[0] = settings->m_frac;
|
|
reg[1] = settings->m_frac >> 8;
|
|
reg[2] = settings->m_frac >> 16;
|
|
reg[3] = settings->m_frac >> 24 | settings->m_int << 5;
|
|
reg[4] = settings->m_int >> 3;
|
|
reg[5] = settings->hs_div;
|
|
reg[6] = (settings->hs_div >> 8) | (settings->ls_div_bits << 4);
|
|
|
|
err = regmap_bulk_write(data->regmap, SI514_REG_HS_DIV, reg + 5, 2);
|
|
if (err < 0)
|
|
return err;
|
|
/*
|
|
* Writing to SI514_REG_M_INT_FRAC triggers the clock change, so that
|
|
* must be written last
|
|
*/
|
|
return regmap_bulk_write(data->regmap, SI514_REG_M_FRAC1, reg, 5);
|
|
}
|
|
|
|
/* Calculate divider settings for a given frequency */
|
|
static int si514_calc_muldiv(struct clk_si514_muldiv *settings,
|
|
unsigned long frequency)
|
|
{
|
|
u64 m;
|
|
u32 ls_freq;
|
|
u32 tmp;
|
|
u8 res;
|
|
|
|
if ((frequency < SI514_MIN_FREQ) || (frequency > SI514_MAX_FREQ))
|
|
return -EINVAL;
|
|
|
|
/* Determine the minimum value of LS_DIV and resulting target freq. */
|
|
ls_freq = frequency;
|
|
if (frequency >= (FVCO_MIN / HS_DIV_MAX))
|
|
settings->ls_div_bits = 0;
|
|
else {
|
|
res = 1;
|
|
tmp = 2 * HS_DIV_MAX;
|
|
while (tmp <= (HS_DIV_MAX * 32)) {
|
|
if ((frequency * tmp) >= FVCO_MIN)
|
|
break;
|
|
++res;
|
|
tmp <<= 1;
|
|
}
|
|
settings->ls_div_bits = res;
|
|
ls_freq = frequency << res;
|
|
}
|
|
|
|
/* Determine minimum HS_DIV, round up to even number */
|
|
settings->hs_div = DIV_ROUND_UP(FVCO_MIN >> 1, ls_freq) << 1;
|
|
|
|
/* M = LS_DIV x HS_DIV x frequency / F_XO (in fixed-point) */
|
|
m = ((u64)(ls_freq * settings->hs_div) << 29) + (FXO / 2);
|
|
do_div(m, FXO);
|
|
settings->m_frac = (u32)m & (BIT(29) - 1);
|
|
settings->m_int = (u32)(m >> 29);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Calculate resulting frequency given the register settings */
|
|
static unsigned long si514_calc_rate(struct clk_si514_muldiv *settings)
|
|
{
|
|
u64 m = settings->m_frac | ((u64)settings->m_int << 29);
|
|
u32 d = settings->hs_div * BIT(settings->ls_div_bits);
|
|
|
|
return ((u32)(((m * FXO) + (FXO / 2)) >> 29)) / d;
|
|
}
|
|
|
|
static unsigned long si514_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_si514 *data = to_clk_si514(hw);
|
|
struct clk_si514_muldiv settings;
|
|
int err;
|
|
|
|
err = si514_get_muldiv(data, &settings);
|
|
if (err) {
|
|
dev_err(&data->i2c_client->dev, "unable to retrieve settings\n");
|
|
return 0;
|
|
}
|
|
|
|
return si514_calc_rate(&settings);
|
|
}
|
|
|
|
static long si514_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate)
|
|
{
|
|
struct clk_si514_muldiv settings;
|
|
int err;
|
|
|
|
if (!rate)
|
|
return 0;
|
|
|
|
err = si514_calc_muldiv(&settings, rate);
|
|
if (err)
|
|
return err;
|
|
|
|
return si514_calc_rate(&settings);
|
|
}
|
|
|
|
/*
|
|
* Update output frequency for big frequency changes (> 1000 ppm).
|
|
* The chip supports <1000ppm changes "on the fly", we haven't implemented
|
|
* that here.
|
|
*/
|
|
static int si514_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_si514 *data = to_clk_si514(hw);
|
|
struct clk_si514_muldiv settings;
|
|
int err;
|
|
|
|
err = si514_calc_muldiv(&settings, rate);
|
|
if (err)
|
|
return err;
|
|
|
|
si514_enable_output(data, false);
|
|
|
|
err = si514_set_muldiv(data, &settings);
|
|
if (err < 0)
|
|
return err; /* Undefined state now, best to leave disabled */
|
|
|
|
/* Trigger calibration */
|
|
err = regmap_write(data->regmap, SI514_REG_CONTROL, SI514_CONTROL_FCAL);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Applying a new frequency can take up to 10ms */
|
|
usleep_range(10000, 12000);
|
|
|
|
si514_enable_output(data, true);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct clk_ops si514_clk_ops = {
|
|
.recalc_rate = si514_recalc_rate,
|
|
.round_rate = si514_round_rate,
|
|
.set_rate = si514_set_rate,
|
|
};
|
|
|
|
static bool si514_regmap_is_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SI514_REG_CONTROL:
|
|
case SI514_REG_RESET:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool si514_regmap_is_writeable(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SI514_REG_LP:
|
|
case SI514_REG_M_FRAC1 ... SI514_REG_LS_HS_DIV:
|
|
case SI514_REG_OE_STATE:
|
|
case SI514_REG_RESET:
|
|
case SI514_REG_CONTROL:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config si514_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = SI514_REG_CONTROL,
|
|
.writeable_reg = si514_regmap_is_writeable,
|
|
.volatile_reg = si514_regmap_is_volatile,
|
|
};
|
|
|
|
static int si514_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct clk_si514 *data;
|
|
struct clk_init_data init;
|
|
int err;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
init.ops = &si514_clk_ops;
|
|
init.flags = 0;
|
|
init.num_parents = 0;
|
|
data->hw.init = &init;
|
|
data->i2c_client = client;
|
|
|
|
if (of_property_read_string(client->dev.of_node, "clock-output-names",
|
|
&init.name))
|
|
init.name = client->dev.of_node->name;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &si514_regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
dev_err(&client->dev, "failed to allocate register map\n");
|
|
return PTR_ERR(data->regmap);
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
|
|
err = devm_clk_hw_register(&client->dev, &data->hw);
|
|
if (err) {
|
|
dev_err(&client->dev, "clock registration failed\n");
|
|
return err;
|
|
}
|
|
err = of_clk_add_hw_provider(client->dev.of_node, of_clk_hw_simple_get,
|
|
&data->hw);
|
|
if (err) {
|
|
dev_err(&client->dev, "unable to add clk provider\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int si514_remove(struct i2c_client *client)
|
|
{
|
|
of_clk_del_provider(client->dev.of_node);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id si514_id[] = {
|
|
{ "si514", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, si514_id);
|
|
|
|
static const struct of_device_id clk_si514_of_match[] = {
|
|
{ .compatible = "silabs,si514" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, clk_si514_of_match);
|
|
|
|
static struct i2c_driver si514_driver = {
|
|
.driver = {
|
|
.name = "si514",
|
|
.of_match_table = clk_si514_of_match,
|
|
},
|
|
.probe = si514_probe,
|
|
.remove = si514_remove,
|
|
.id_table = si514_id,
|
|
};
|
|
module_i2c_driver(si514_driver);
|
|
|
|
MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
|
|
MODULE_DESCRIPTION("Si514 driver");
|
|
MODULE_LICENSE("GPL");
|