mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-09 12:04:15 +08:00
ca4e7c5120
for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+ /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf X6P2pfkBqkg= =ys4O -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
299 lines
8.6 KiB
Plaintext
299 lines
8.6 KiB
Plaintext
|
|
config CLKDEV_LOOKUP
|
|
bool
|
|
select HAVE_CLK
|
|
|
|
config HAVE_CLK_PREPARE
|
|
bool
|
|
|
|
config COMMON_CLK
|
|
bool
|
|
select HAVE_CLK_PREPARE
|
|
select CLKDEV_LOOKUP
|
|
select SRCU
|
|
select RATIONAL
|
|
---help---
|
|
The common clock framework is a single definition of struct
|
|
clk, useful across many platforms, as well as an
|
|
implementation of the clock API in include/linux/clk.h.
|
|
Architectures utilizing the common struct clk should select
|
|
this option.
|
|
|
|
menu "Common Clock Framework"
|
|
depends on COMMON_CLK
|
|
|
|
config COMMON_CLK_WM831X
|
|
tristate "Clock driver for WM831x/2x PMICs"
|
|
depends on MFD_WM831X
|
|
---help---
|
|
Supports the clocking subsystem of the WM831x/2x series of
|
|
PMICs from Wolfson Microelectronics.
|
|
|
|
source "drivers/clk/versatile/Kconfig"
|
|
|
|
config CLK_HSDK
|
|
bool "PLL Driver for HSDK platform"
|
|
depends on OF || COMPILE_TEST
|
|
---help---
|
|
This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
|
|
control.
|
|
|
|
config COMMON_CLK_MAX77686
|
|
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
|
|
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
|
|
---help---
|
|
This driver supports Maxim 77620/77686/77802 crystal oscillator
|
|
clock.
|
|
|
|
config COMMON_CLK_RK808
|
|
tristate "Clock driver for RK805/RK808/RK818"
|
|
depends on MFD_RK808
|
|
---help---
|
|
This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
|
|
multi-function devices have two fixed-rate oscillators,
|
|
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
|
|
by control register.
|
|
|
|
config COMMON_CLK_HI655X
|
|
tristate "Clock driver for Hi655x" if EXPERT
|
|
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
|
|
depends on REGMAP
|
|
default MFD_HI655X_PMIC
|
|
---help---
|
|
This driver supports the hi655x PMIC clock. This
|
|
multi-function device has one fixed-rate oscillator, clocked
|
|
at 32KHz.
|
|
|
|
config COMMON_CLK_SCMI
|
|
tristate "Clock driver controlled via SCMI interface"
|
|
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
|
|
---help---
|
|
This driver provides support for clocks that are controlled
|
|
by firmware that implements the SCMI interface.
|
|
|
|
This driver uses SCMI Message Protocol to interact with the
|
|
firmware providing all the clock controls.
|
|
|
|
config COMMON_CLK_SCPI
|
|
tristate "Clock driver controlled via SCPI interface"
|
|
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
|
|
---help---
|
|
This driver provides support for clocks that are controlled
|
|
by firmware that implements the SCPI interface.
|
|
|
|
This driver uses SCPI Message Protocol to interact with the
|
|
firmware providing all the clock controls.
|
|
|
|
config COMMON_CLK_SI5351
|
|
tristate "Clock driver for SiLabs 5351A/B/C"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select RATIONAL
|
|
---help---
|
|
This driver supports Silicon Labs 5351A/B/C programmable clock
|
|
generators.
|
|
|
|
config COMMON_CLK_SI514
|
|
tristate "Clock driver for SiLabs 514 devices"
|
|
depends on I2C
|
|
depends on OF
|
|
select REGMAP_I2C
|
|
help
|
|
---help---
|
|
This driver supports the Silicon Labs 514 programmable clock
|
|
generator.
|
|
|
|
config COMMON_CLK_SI544
|
|
tristate "Clock driver for SiLabs 544 devices"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
---help---
|
|
This driver supports the Silicon Labs 544 programmable clock
|
|
generator.
|
|
|
|
config COMMON_CLK_SI570
|
|
tristate "Clock driver for SiLabs 570 and compatible devices"
|
|
depends on I2C
|
|
depends on OF
|
|
select REGMAP_I2C
|
|
help
|
|
---help---
|
|
This driver supports Silicon Labs 570/571/598/599 programmable
|
|
clock generators.
|
|
|
|
config COMMON_CLK_CDCE706
|
|
tristate "Clock driver for TI CDCE706 clock synthesizer"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select RATIONAL
|
|
---help---
|
|
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
|
|
|
|
config COMMON_CLK_CDCE925
|
|
tristate "Clock driver for TI CDCE913/925/937/949 devices"
|
|
depends on I2C
|
|
depends on OF
|
|
select REGMAP_I2C
|
|
help
|
|
---help---
|
|
This driver supports the TI CDCE913/925/937/949 programmable clock
|
|
synthesizer. Each chip has different number of PLLs and outputs.
|
|
For example, the CDCE925 contains two PLLs with spread-spectrum
|
|
clocking support and five output dividers. The driver only supports
|
|
the following setup, and uses a fixed setting for the output muxes.
|
|
Y1 is derived from the input clock
|
|
Y2 and Y3 derive from PLL1
|
|
Y4 and Y5 derive from PLL2
|
|
Given a target output frequency, the driver will set the PLL and
|
|
divider to best approximate the desired output.
|
|
|
|
config COMMON_CLK_CS2000_CP
|
|
tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
|
|
depends on I2C
|
|
help
|
|
If you say yes here you get support for the CS2000 clock multiplier.
|
|
|
|
config COMMON_CLK_GEMINI
|
|
bool "Clock driver for Cortina Systems Gemini SoC"
|
|
depends on ARCH_GEMINI || COMPILE_TEST
|
|
select MFD_SYSCON
|
|
select RESET_CONTROLLER
|
|
---help---
|
|
This driver supports the SoC clocks on the Cortina Systems Gemini
|
|
platform, also known as SL3516 or CS3516.
|
|
|
|
config COMMON_CLK_ASPEED
|
|
bool "Clock driver for Aspeed BMC SoCs"
|
|
depends on ARCH_ASPEED || COMPILE_TEST
|
|
default ARCH_ASPEED
|
|
select MFD_SYSCON
|
|
select RESET_CONTROLLER
|
|
---help---
|
|
This driver supports the SoC clocks on the Aspeed BMC platforms.
|
|
|
|
The G4 and G5 series, including the ast2400 and ast2500, are supported
|
|
by this driver.
|
|
|
|
config COMMON_CLK_S2MPS11
|
|
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
|
|
depends on MFD_SEC_CORE || COMPILE_TEST
|
|
---help---
|
|
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
|
|
clock. These multi-function devices have two (S2MPS14) or three
|
|
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
|
|
|
|
config CLK_TWL6040
|
|
tristate "External McPDM functional clock from twl6040"
|
|
depends on TWL6040_CORE
|
|
---help---
|
|
Enable the external functional clock support on OMAP4+ platforms for
|
|
McPDM. McPDM module is using the external bit clock on the McPDM bus
|
|
as functional clock.
|
|
|
|
config COMMON_CLK_AXI_CLKGEN
|
|
tristate "AXI clkgen driver"
|
|
depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
|
|
help
|
|
---help---
|
|
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
|
|
FPGAs. It is commonly used in Analog Devices' reference designs.
|
|
|
|
config CLK_QORIQ
|
|
bool "Clock driver for Freescale QorIQ platforms"
|
|
depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
|
|
---help---
|
|
This adds the clock driver support for Freescale QorIQ platforms
|
|
using common clock framework.
|
|
|
|
config COMMON_CLK_XGENE
|
|
bool "Clock driver for APM XGene SoC"
|
|
default y
|
|
depends on ARM64 || COMPILE_TEST
|
|
---help---
|
|
Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
|
|
|
|
config COMMON_CLK_NXP
|
|
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
|
|
select REGMAP_MMIO if ARCH_LPC32XX
|
|
select MFD_SYSCON if ARCH_LPC18XX
|
|
---help---
|
|
Support for clock providers on NXP platforms.
|
|
|
|
config COMMON_CLK_PALMAS
|
|
tristate "Clock driver for TI Palmas devices"
|
|
depends on MFD_PALMAS
|
|
---help---
|
|
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
|
|
using common clock framework.
|
|
|
|
config COMMON_CLK_PWM
|
|
tristate "Clock driver for PWMs used as clock outputs"
|
|
depends on PWM
|
|
---help---
|
|
Adapter driver so that any PWM output can be (mis)used as clock signal
|
|
at 50% duty cycle.
|
|
|
|
config COMMON_CLK_PXA
|
|
def_bool COMMON_CLK && ARCH_PXA
|
|
---help---
|
|
Support for the Marvell PXA SoC.
|
|
|
|
config COMMON_CLK_PIC32
|
|
def_bool COMMON_CLK && MACH_PIC32
|
|
|
|
config COMMON_CLK_OXNAS
|
|
bool "Clock driver for the OXNAS SoC Family"
|
|
depends on ARCH_OXNAS || COMPILE_TEST
|
|
select MFD_SYSCON
|
|
---help---
|
|
Support for the OXNAS SoC Family clocks.
|
|
|
|
config COMMON_CLK_VC5
|
|
tristate "Clock driver for IDT VersaClock 5,6 devices"
|
|
depends on I2C
|
|
depends on OF
|
|
select REGMAP_I2C
|
|
help
|
|
---help---
|
|
This driver supports the IDT VersaClock 5 and VersaClock 6
|
|
programmable clock generators.
|
|
|
|
config COMMON_CLK_STM32MP157
|
|
def_bool COMMON_CLK && MACH_STM32MP157
|
|
help
|
|
---help---
|
|
Support for stm32mp157 SoC family clocks
|
|
|
|
config COMMON_CLK_STM32F
|
|
bool "Clock driver for stm32f4 and stm32f7 SoC families"
|
|
depends on MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746
|
|
help
|
|
---help---
|
|
Support for stm32f4 and stm32f7 SoC families clocks
|
|
|
|
config COMMON_CLK_STM32H7
|
|
bool "Clock driver for stm32h7 SoC family"
|
|
depends on MACH_STM32H743
|
|
help
|
|
---help---
|
|
Support for stm32h7 SoC family clocks
|
|
|
|
source "drivers/clk/bcm/Kconfig"
|
|
source "drivers/clk/hisilicon/Kconfig"
|
|
source "drivers/clk/imgtec/Kconfig"
|
|
source "drivers/clk/keystone/Kconfig"
|
|
source "drivers/clk/mediatek/Kconfig"
|
|
source "drivers/clk/meson/Kconfig"
|
|
source "drivers/clk/mvebu/Kconfig"
|
|
source "drivers/clk/qcom/Kconfig"
|
|
source "drivers/clk/renesas/Kconfig"
|
|
source "drivers/clk/samsung/Kconfig"
|
|
source "drivers/clk/sprd/Kconfig"
|
|
source "drivers/clk/sunxi-ng/Kconfig"
|
|
source "drivers/clk/tegra/Kconfig"
|
|
source "drivers/clk/ti/Kconfig"
|
|
source "drivers/clk/uniphier/Kconfig"
|
|
|
|
endmenu
|