linux/arch/arm/mach-pxa/include/mach
Rob Herring 1ac02d7958 ARM: fix __io macro for PCMCIA
With commit c334bc1 (ARM: make mach/io.h include optional), PCMCIA was
broken. PCMCIA depends on __io() returning a valid i/o address, and most
ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This
needs a better fix with a fixed i/o address mapping, but for now we just
restore things to the previous behavior.

This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled,
but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff,
so it doesn't need an io.h.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Joachim Eastwood <joachim.eastwood@jotron.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270)
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-05 11:29:55 -07:00
..
addr-map.h ARM: pxa: use correct __iomem annotations 2011-10-08 21:03:07 +08:00
arcom-pcmcia.h [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus 2009-12-13 21:42:58 +08:00
audio.h ALSA: Allow passing platform_data for pxa2xx-ac97 2009-08-13 22:19:37 +01:00
balloon3.h PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management 2012-02-04 14:32:22 +00:00
bitfield.h
camera.h pxa_camera: remove init() callback 2010-02-26 15:11:00 -03:00
colibri.h ARM: pxa/colibri: use correct SD detect pin 2011-02-09 23:05:03 +08:00
corgi.h ARM: pxa: rename NR_BUILTIN_GPIO 2011-11-14 21:07:59 +08:00
csb726.h ARM: pxa: rename gpio_to_irq and irq_to_gpio 2011-11-14 21:07:59 +08:00
debug-macro.S ARM: add an extra temp register to the low level debugging addruart macro 2011-09-26 10:11:25 -04:00
dma.h [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support 2009-03-23 10:11:31 +08:00
eseries-gpio.h ASoC: machine support for Toshiba e740 PDA 2009-01-19 16:15:41 +00:00
eseries-irq.h ARM: pxa: encode IRQ number into .nr_irqs 2010-10-08 16:21:17 +08:00
gpio.h ARM: pxa: change gpio to platform device 2011-11-15 19:08:27 +08:00
gumstix.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
h5000.h [ARM] pxa: add basic support for HP iPAQ h5000 2008-12-02 14:43:50 +08:00
hardware.h ARM: pxa: use common IOMEM definition 2012-03-25 14:36:31 -05:00
hx4700.h ARM: pxa: rename NR_BUILTIN_GPIO 2011-11-14 21:07:59 +08:00
idp.h ARM: pxa: change gpio to platform device 2011-11-15 19:08:27 +08:00
io.h ARM: fix __io macro for PCMCIA 2012-04-05 11:29:55 -07:00
irda.h [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
irqs.h ARM: pxa: remove NR_IRQS 2012-01-25 20:37:49 -06:00
littleton.h ARM: pxa: change gpio to platform device 2011-11-15 19:08:27 +08:00
lpd270.h ARM: pxa: use correct __iomem annotations 2011-10-08 21:03:07 +08:00
lubbock.h ARM: pxa: encode IRQ number into .nr_irqs 2010-10-08 16:21:17 +08:00
magician.h ARM: pxa: rename NR_BUILTIN_GPIO 2011-11-14 21:07:59 +08:00
mainstone.h ARM: 7344/1: pxa: mainstone: add missing include for IRQ_BOARD_START 2012-02-23 22:15:26 +00:00
mfp-pxa2xx.h [ARM] pxa: add MFP_LPM_KEEP_OUTPUT flag to pin config 2010-05-11 17:24:59 +02:00
mfp-pxa3xx.h [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mfp-pxa25x.h [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
mfp-pxa27x.h ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% 2012-03-14 16:46:13 +08:00
mfp-pxa300.h ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300 2010-08-30 09:59:43 +08:00
mfp-pxa320.h [ARM] pxa: add additional mfp definitions for pxa320 2009-06-05 10:32:55 +08:00
mfp-pxa930.h ARM: pxa: append tavorevb3 support 2010-10-09 17:07:24 +08:00
mfp.h [ARM] pxa: remove duplicate mfp definition in mach 2009-09-10 18:49:24 +08:00
mioa701.h [ARM] pxa/MioA701: discovered new gpio definitions. 2008-12-02 14:43:48 +08:00
mmc.h [ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond 2010-05-11 17:25:04 +02:00
mtd-xip.h ARM: pxa: use correct __iomem annotations 2011-10-08 21:03:07 +08:00
mxm8x10.h [ARM] pxa: fix typo in mxm8x10.h 2010-03-02 10:24:14 +08:00
ohci.h [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers 2008-10-07 19:12:57 +01:00
palm27x.h ARM: pxa: fix inconsistent CONFIG_USB_PXA27X 2011-11-10 15:32:27 +08:00
palmasoc.h [ARM] pxa/palm27x: General fix for Palm27x aSoC driver 2009-04-19 21:56:54 +08:00
palmld.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
palmt5.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
palmtc.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
palmte2.h tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
palmtreo.h [ARM] pxa/treo: add Palm Centro 685 support 2009-12-01 09:02:49 +08:00
palmtx.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
palmz72.h ARM: pxa: PalmZ72: Add OV9640 camera support 2011-03-16 16:32:47 +08:00
pata_pxa.h [ARM] pata_pxa: DMA-capable PATA driver 2010-06-18 15:07:32 +08:00
pcm027.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
pcm990_baseboard.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
pm.h ARM: pm: allow suspend finisher to return error codes 2011-07-02 09:54:01 +01:00
poodle.h ARM: pxa: rename NR_BUILTIN_GPIO 2011-11-14 21:07:59 +08:00
pxa2xx-regs.h ARM: pxa: Access SMEMC via virtual addresses 2010-12-16 14:31:16 +08:00
pxa3xx-regs.h Fix common misspellings 2011-03-31 11:26:23 -03:00
pxa3xx-u2d.h ARM: pxa: add U2D controller and ULPI driver for pxa3xx 2010-10-08 16:21:17 +08:00
pxa3xx.h ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
pxa25x-udc.h
pxa25x.h ARM: pxa: enable MULTI_IRQ_HANDLER for all boards 2011-07-12 19:50:33 +08:00
pxa27x-udc.h treewide: transciever/transceiver spelling fixes 2011-06-24 11:20:14 +02:00
pxa27x.h ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available 2011-10-08 21:02:44 +08:00
pxa95x.h ARM: pxa: pxa95x/saarb depends on pxa3xx code 2011-10-08 21:03:00 +08:00
pxa300.h ARM: pxa: add common header file for pxa3xx 2011-07-12 19:45:20 +08:00
pxa320.h ARM: pxa: add common header file for pxa3xx 2011-07-12 19:45:20 +08:00
pxa930_rotary.h Input: add support for enhanced rotary controller on pxa930 and pxa935 2008-12-29 04:59:16 -08:00
pxa930_trkball.h Input: add support for trackball on pxa930 and pxa935 2008-12-29 04:58:58 -08:00
pxa930.h ARM: pxa: add common header file for pxa3xx 2011-07-12 19:45:20 +08:00
pxafb.h ARM: pxa: make pxafb_smart_*() empty when not enabled 2011-10-08 21:03:04 +08:00
regs-ac97.h [ARM] pxa: fix missing of __REG() definition for ac97 registers access 2009-01-19 11:39:36 +08:00
regs-lcd.h [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices 2008-12-29 18:00:04 +08:00
regs-ost.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
regs-rtc.h [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
regs-u2d.h [ARM] pxa: add missing new line to regs-u2d.h 2010-05-06 11:12:10 +08:00
regs-uart.h [ARM] pxa: move UART register definitions into dedicated regs-uart.h 2008-12-02 14:42:38 +08:00
reset.h [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
sharpsl_pm.h [ARM] pxa: removed mostly unused and confusing two sharpsl.h 2010-08-05 14:32:38 +08:00
smemc.h ARM: pxa: use correct __iomem annotations 2011-10-08 21:03:07 +08:00
spitz.h ARM: pxa: rename NR_BUILTIN_GPIO 2011-11-14 21:07:59 +08:00
timex.h [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant 2008-12-29 17:57:48 +08:00
tosa_bt.h
tosa.h ARM: pxa: rename NR_BUILTIN_GPIO 2011-11-14 21:07:59 +08:00
trizeps4.h ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ 2011-11-14 21:07:58 +08:00
udc.h
uncompress.h ARM: zImage: remove the static qualifier from global data variables 2011-05-07 00:08:02 -04:00
viper.h [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus 2009-12-13 21:42:58 +08:00
vpac270.h [ARM] pxa/vpac270: remove TS_IRQ magic number 2010-05-11 17:25:03 +02:00
z2.h ARM: PXA: Z2: Fix libertas init/tear down sequences 2011-03-16 14:56:02 +01:00
zeus.h ARM: pxa: use correct __iomem annotations 2011-10-08 21:03:07 +08:00
zylonite.h ARM: pxa: make zylonite_pxa*_init declaration match code 2011-10-08 21:02:57 +08:00