linux/drivers/usb/host/ehci-ppc-of.c
Peter Chen 3c9740a117 usb: hcd: move controller wakeup setting initialization to individual driver
Individual controller driver has different requirement for wakeup
setting, so move it from core to itself. In order to align with
current etting the default wakeup setting is enabled (except for
chipidea host).

Pass compile test with below commands:
	make O=outout/all allmodconfig
	make -j$CPU_NUM O=outout/all drivers/usb

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08 18:06:46 -08:00

240 lines
5.2 KiB
C

/*
* EHCI HCD (Host Controller Driver) for USB.
*
* Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
* Tested on AMCC PPC 440EPx
*
* Valentine Barshak <vbarshak@ru.mvista.com>
*
* Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
* and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
*
* This file is licenced under the GPL.
*/
#include <linux/err.h>
#include <linux/signal.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
static const struct hc_driver ehci_ppc_of_hc_driver = {
.description = hcd_name,
.product_desc = "OF EHCI",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
*/
.reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*
* 440EPx Errata USBH_3
* Fix: Enable Break Memory Transfer (BMT) in INSNREG3
*/
#define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0)
static int
ppc44x_enable_bmt(struct device_node *dn)
{
__iomem u32 *insreg_virt;
insreg_virt = of_iomap(dn, 1);
if (!insreg_virt)
return -EINVAL;
out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
iounmap(insreg_virt);
return 0;
}
static int ehci_hcd_ppc_of_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
struct usb_hcd *hcd;
struct ehci_hcd *ehci = NULL;
struct resource res;
int irq;
int rv;
struct device_node *np;
if (usb_disabled())
return -ENODEV;
dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
rv = of_address_to_resource(dn, 0, &res);
if (rv)
return rv;
hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = res.start;
hcd->rsrc_len = resource_size(&res);
irq = irq_of_parse_and_map(dn, 0);
if (irq == NO_IRQ) {
printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
rv = -EBUSY;
goto err_irq;
}
hcd->regs = devm_ioremap_resource(&op->dev, &res);
if (IS_ERR(hcd->regs)) {
rv = PTR_ERR(hcd->regs);
goto err_ioremap;
}
ehci = hcd_to_ehci(hcd);
np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
if (np != NULL) {
/* claim we really affected by usb23 erratum */
if (!of_address_to_resource(np, 0, &res))
ehci->ohci_hcctrl_reg =
devm_ioremap(&op->dev,
res.start + OHCI_HCCTRL_OFFSET,
OHCI_HCCTRL_LEN);
else
pr_debug("%s: no ohci offset in fdt\n", __FILE__);
if (!ehci->ohci_hcctrl_reg) {
pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
} else {
ehci->has_amcc_usb23 = 1;
}
}
if (of_get_property(dn, "big-endian", NULL)) {
ehci->big_endian_mmio = 1;
ehci->big_endian_desc = 1;
}
if (of_get_property(dn, "big-endian-regs", NULL))
ehci->big_endian_mmio = 1;
if (of_get_property(dn, "big-endian-desc", NULL))
ehci->big_endian_desc = 1;
ehci->caps = hcd->regs;
if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
rv = ppc44x_enable_bmt(dn);
ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
rv ? "NOT ": "");
}
rv = usb_add_hcd(hcd, irq, 0);
if (rv)
goto err_ioremap;
device_wakeup_enable(hcd->self.controller);
return 0;
err_ioremap:
irq_dispose_mapping(irq);
err_irq:
usb_put_hcd(hcd);
return rv;
}
static int ehci_hcd_ppc_of_remove(struct platform_device *op)
{
struct usb_hcd *hcd = platform_get_drvdata(op);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct device_node *np;
struct resource res;
dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
usb_remove_hcd(hcd);
irq_dispose_mapping(hcd->irq);
/* use request_mem_region to test if the ohci driver is loaded. if so
* ensure the ohci core is operational.
*/
if (ehci->has_amcc_usb23) {
np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
if (np != NULL) {
if (!of_address_to_resource(np, 0, &res))
if (!request_mem_region(res.start,
0x4, hcd_name))
set_ohci_hcfs(ehci, 1);
else
release_mem_region(res.start, 0x4);
else
pr_debug("%s: no ohci offset in fdt\n", __FILE__);
of_node_put(np);
}
}
usb_put_hcd(hcd);
return 0;
}
static const struct of_device_id ehci_hcd_ppc_of_match[] = {
{
.compatible = "usb-ehci",
},
{},
};
MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
static struct platform_driver ehci_hcd_ppc_of_driver = {
.probe = ehci_hcd_ppc_of_probe,
.remove = ehci_hcd_ppc_of_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ppc-of-ehci",
.owner = THIS_MODULE,
.of_match_table = ehci_hcd_ppc_of_match,
},
};