mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-09-22 22:11:38 +08:00
6f00a02296
Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch which needs to be driven slightly differently from the traditional external switches. This patch introduces changes in arch/mips/bcm63xx in order to: - register a bcm63xx_enetsw driver instead of bcm63xx_enet driver - update DMA channels configuration & state RAM base addresses - add a new platform data configuration knob to define the number of ports per switch/device and force link on some ports - define the required switch registers On the driver side, the following changes are required: - the switch ports need to be polled to ensure the link is up and running and RX/TX can properly work - basic switch configuration needs to be performed for the switch to forward packets to the CPU - update the MIB counters since the integrated Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| boards | ||
| clk.c | ||
| cpu.c | ||
| cs.c | ||
| dev-dsp.c | ||
| dev-enet.c | ||
| dev-flash.c | ||
| dev-pcmcia.c | ||
| dev-rng.c | ||
| dev-spi.c | ||
| dev-uart.c | ||
| dev-usb-usbd.c | ||
| dev-wdt.c | ||
| early_printk.c | ||
| gpio.c | ||
| irq.c | ||
| Kconfig | ||
| Makefile | ||
| nvram.c | ||
| Platform | ||
| prom.c | ||
| reset.c | ||
| setup.c | ||
| timer.c | ||