linux/drivers/net/wireless/rtlwifi/rtl8821ae/pwrseq.c
Larry Finger 21e4b0726d rtlwifi: rtl8821ae: Move driver from staging to regular tree
This driver was entered into staging a few cycles ago because there was
not time to integrate the Realtek version into the support routines in
the kernel. Now that there is an effort to converg the code base from Linux
and the Realtek repo, it is time to move this driver. In addition, all the
updates included in the 06/28/2014 version of the Realtek drivers are
included here.

With this change, it will be necessary to delete the staging driver. That
will be handled in a separate patch. As it impacts the staging tree, such a
patch is sent to a different destination.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-26 17:22:28 -04:00

183 lines
5.3 KiB
C

/******************************************************************************
*
* Copyright(c) 2009-2010 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#include "../pwrseqcmd.h"
#include "pwrseq.h"
/* drivers should parse below arrays and do the corresponding actions */
/* 3 Power on Array */
struct wlan_pwr_cfg rtl8812_power_on_flow[RTL8812_TRANS_CARDEMU_TO_ACT_STEPS +
RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_CARDEMU_TO_ACT
RTL8812_TRANS_END
};
/* 3Radio off GPIO Array */
struct wlan_pwr_cfg rtl8812_radio_off_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_ACT_TO_CARDEMU
RTL8812_TRANS_END
};
/* 3Card Disable Array */
struct wlan_pwr_cfg rtl8812_card_disable_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8812_TRANS_CARDEMU_TO_PDN_STEPS
+ RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_ACT_TO_CARDEMU
RTL8812_TRANS_CARDEMU_TO_CARDDIS
RTL8812_TRANS_END
};
/* 3 Card Enable Array */
struct wlan_pwr_cfg rtl8812_card_enable_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8812_TRANS_CARDEMU_TO_PDN_STEPS
+ RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_CARDDIS_TO_CARDEMU
RTL8812_TRANS_CARDEMU_TO_ACT
RTL8812_TRANS_END
};
/* 3Suspend Array */
struct wlan_pwr_cfg rtl8812_suspend_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8812_TRANS_CARDEMU_TO_SUS_STEPS +
RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_ACT_TO_CARDEMU
RTL8812_TRANS_CARDEMU_TO_SUS
RTL8812_TRANS_END
};
/* 3 Resume Array */
struct wlan_pwr_cfg rtl8812_resume_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8812_TRANS_CARDEMU_TO_SUS_STEPS +
RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_SUS_TO_CARDEMU
RTL8812_TRANS_CARDEMU_TO_ACT
RTL8812_TRANS_END
};
/* 3HWPDN Array */
struct wlan_pwr_cfg rtl8812_hwpdn_flow[RTL8812_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8812_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8812_TRANS_END_STEPS] = {
RTL8812_TRANS_ACT_TO_CARDEMU
RTL8812_TRANS_CARDEMU_TO_PDN
RTL8812_TRANS_END
};
/* 3 Enter LPS */
struct wlan_pwr_cfg rtl8812_enter_lps_flow[RTL8812_TRANS_ACT_TO_LPS_STEPS +
RTL8812_TRANS_END_STEPS] = {
/* FW behavior */
RTL8812_TRANS_ACT_TO_LPS
RTL8812_TRANS_END
};
/* 3 Leave LPS */
struct wlan_pwr_cfg rtl8812_leave_lps_flow[RTL8812_TRANS_LPS_TO_ACT_STEPS +
RTL8812_TRANS_END_STEPS] = {
/* FW behavior */
RTL8812_TRANS_LPS_TO_ACT
RTL8812_TRANS_END
};
/* drivers should parse below arrays and do the corresponding actions */
/*3 Power on Array*/
struct wlan_pwr_cfg rtl8821A_power_on_flow[RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_CARDEMU_TO_ACT
RTL8821A_TRANS_END
};
/*3Radio off GPIO Array */
struct wlan_pwr_cfg rtl8821A_radio_off_flow[RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_ACT_TO_CARDEMU
RTL8821A_TRANS_END
};
/*3Card Disable Array*/
struct wlan_pwr_cfg rtl8821A_card_disable_flow
[RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_ACT_TO_CARDEMU
RTL8821A_TRANS_CARDEMU_TO_CARDDIS
RTL8821A_TRANS_END
};
/*3 Card Enable Array*/
/*RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS*/
struct wlan_pwr_cfg rtl8821A_card_enable_flow
[RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8821A_TRANS_CARDEMU_TO_ACT_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_CARDDIS_TO_CARDEMU
RTL8821A_TRANS_CARDEMU_TO_ACT
RTL8821A_TRANS_END
};
/*3Suspend Array*/
struct wlan_pwr_cfg rtl8821A_suspend_flow[RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_ACT_TO_CARDEMU
RTL8821A_TRANS_CARDEMU_TO_SUS
RTL8821A_TRANS_END
};
/*3 Resume Array*/
struct wlan_pwr_cfg rtl8821A_resume_flow[RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8821A_TRANS_CARDEMU_TO_SUS_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_SUS_TO_CARDEMU
RTL8821A_TRANS_CARDEMU_TO_ACT
RTL8821A_TRANS_END
};
/*3HWPDN Array*/
struct wlan_pwr_cfg rtl8821A_hwpdn_flow[RTL8821A_TRANS_ACT_TO_CARDEMU_STEPS
+ RTL8821A_TRANS_CARDEMU_TO_PDN_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
RTL8821A_TRANS_ACT_TO_CARDEMU
RTL8821A_TRANS_CARDEMU_TO_PDN
RTL8821A_TRANS_END
};
/*3 Enter LPS */
struct wlan_pwr_cfg rtl8821A_enter_lps_flow[RTL8821A_TRANS_ACT_TO_LPS_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
/*FW behavior*/
RTL8821A_TRANS_ACT_TO_LPS
RTL8821A_TRANS_END
};
/*3 Leave LPS */
struct wlan_pwr_cfg rtl8821A_leave_lps_flow[RTL8821A_TRANS_LPS_TO_ACT_STEPS
+ RTL8821A_TRANS_END_STEPS] = {
/*FW behavior*/
RTL8821A_TRANS_LPS_TO_ACT
RTL8821A_TRANS_END
};