mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
6ddd5fce84
The GPIO expander's p1 on i2c5 bus 0x26 address is used for selecting between audio and VIN6 functionality. For VIN6 use an add on card is needed while audio is present on the board itself. Select the audio functionality over the VIN6 in the dts file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
722 lines
17 KiB
Plaintext
722 lines
17 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "dra72x.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "TI DRA722";
|
|
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x40000000>; /* 1024 MB */
|
|
};
|
|
|
|
aliases {
|
|
display0 = &hdmi0;
|
|
};
|
|
|
|
evm_3v3: fixedregulator-evm_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "evm_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
aic_dvdd: fixedregulator-aic_dvdd {
|
|
/* TPS77018DBVT */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "aic_dvdd";
|
|
vin-supply = <&evm_3v3>;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
evm_3v3_sd: fixedregulator-sd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "evm_3v3_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
extcon_usb1: extcon_usb1 {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
extcon_usb2: extcon_usb2 {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
hdmi0: connector {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpd12s015: encoder {
|
|
compatible = "ti,tpd12s015";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tpd12s015_pins>;
|
|
|
|
gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
|
|
<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
|
|
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tpd12s015_in: endpoint {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tpd12s015_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dra7_pmx_core {
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
|
|
0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
|
|
>;
|
|
};
|
|
|
|
i2c5_pins: pinmux_i2c5_pins {
|
|
pinctrl-single,pins = <
|
|
0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
|
|
0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
|
|
>;
|
|
};
|
|
|
|
i2c5_pins: pinmux_i2c5_pins {
|
|
pinctrl-single,pins = <
|
|
0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
|
|
0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
|
|
>;
|
|
};
|
|
|
|
nand_default: nand_default {
|
|
pinctrl-single,pins = <
|
|
0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
|
|
0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
|
|
0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
|
|
0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
|
|
0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
|
|
0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
|
|
0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
|
|
0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
|
|
0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
|
|
0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
|
|
0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
|
|
0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
|
|
0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
|
|
0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
|
|
0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
|
|
0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
|
|
0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
|
|
0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
|
|
0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
|
|
0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
|
|
0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
|
|
0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
|
|
>;
|
|
};
|
|
|
|
usb1_pins: pinmux_usb1_pins {
|
|
pinctrl-single,pins = <
|
|
0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
|
|
>;
|
|
};
|
|
|
|
usb2_pins: pinmux_usb2_pins {
|
|
pinctrl-single,pins = <
|
|
0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
|
|
>;
|
|
};
|
|
|
|
tps65917_pins_default: tps65917_pins_default {
|
|
pinctrl-single,pins = <
|
|
0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins_default: mmc1_pins_default {
|
|
pinctrl-single,pins = <
|
|
0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
|
|
0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
|
|
0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
|
|
0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
|
|
0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
|
|
0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
|
|
0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
|
|
>;
|
|
};
|
|
|
|
mmc2_pins_default: mmc2_pins_default {
|
|
pinctrl-single,pins = <
|
|
0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
|
|
0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
|
|
0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
|
|
0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
|
|
0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
|
|
0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
|
|
0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
|
|
0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
|
|
0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
|
|
0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
|
|
>;
|
|
};
|
|
|
|
dcan1_pins_default: dcan1_pins_default {
|
|
pinctrl-single,pins = <
|
|
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
|
|
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
|
|
>;
|
|
};
|
|
|
|
dcan1_pins_sleep: dcan1_pins_sleep {
|
|
pinctrl-single,pins = <
|
|
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
|
|
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
|
|
>;
|
|
};
|
|
|
|
qspi1_pins: pinmux_qspi1_pins {
|
|
pinctrl-single,pins = <
|
|
0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
|
|
0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
|
|
0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
|
|
0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
|
|
0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
|
|
0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
|
|
0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
|
|
>;
|
|
};
|
|
|
|
hdmi_pins: pinmux_hdmi_pins {
|
|
pinctrl-single,pins = <
|
|
0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
|
|
0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
|
|
>;
|
|
};
|
|
|
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
|
pinctrl-single,pins = <
|
|
0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
clock-frequency = <400000>;
|
|
|
|
tps65917: tps65917@58 {
|
|
compatible = "ti,tps65917";
|
|
reg = <0x58>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tps65917_pins_default>;
|
|
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
ti,system-power-controller;
|
|
|
|
tps65917_pmic {
|
|
compatible = "ti,tps65917-pmic";
|
|
|
|
regulators {
|
|
smps1_reg: smps1 {
|
|
/* VDD_MPU */
|
|
regulator-name = "smps1";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps2_reg: smps2 {
|
|
/* VDD_CORE */
|
|
regulator-name = "smps2";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1060000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
smps3_reg: smps3 {
|
|
/* VDD_GPU IVA DSPEVE */
|
|
regulator-name = "smps3";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
smps4_reg: smps4 {
|
|
/* VDDS1V8 */
|
|
regulator-name = "smps4";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps5_reg: smps5 {
|
|
/* VDD_DDR */
|
|
regulator-name = "smps5";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: ldo1 {
|
|
/* LDO1_OUT --> SDIO */
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
/* LDO2_OUT --> TP1017 (UNUSED) */
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
/* VDDA_1V8_PHY */
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo5_reg: ldo5 {
|
|
/* VDDA_1V8_PLL */
|
|
regulator-name = "ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
/* VDDA_3V_USB: VDDA_USBHS33 */
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
tps65917_power_button {
|
|
compatible = "ti,palmas-pwrbutton";
|
|
interrupt-parent = <&tps65917>;
|
|
interrupts = <1 IRQ_TYPE_NONE>;
|
|
wakeup-source;
|
|
ti,palmas-long-press-seconds = <6>;
|
|
};
|
|
};
|
|
|
|
pcf_gpio_21: gpio@21 {
|
|
compatible = "ti,pcf8575";
|
|
reg = <0x21>;
|
|
lines-initial-states = <0x1408>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
cpsw_sel_s0 {
|
|
gpio-hog;
|
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins>;
|
|
clock-frequency = <400000>;
|
|
|
|
pcf_hdmi: pcf8575@26 {
|
|
compatible = "nxp,pcf8575";
|
|
reg = <0x26>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
/*
|
|
* initial state is used here to keep the mdio interface
|
|
* selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
|
|
* VIN2_S0 driven high otherwise Ethernet stops working
|
|
* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
|
|
*/
|
|
lines-initial-states = <0x0f2b>;
|
|
|
|
p1 {
|
|
/* vin6_sel_s0: high: VIN6, low: audio */
|
|
gpio-hog;
|
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "vin6_sel_s0";
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nand_default>;
|
|
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
|
|
nand@0,0 {
|
|
/* To use NAND, DIP switch SW5 must be set like so:
|
|
* SW5.1 (NAND_SELn) = ON (LOW)
|
|
* SW5.9 (GPMC_WPN) = OFF (HIGH)
|
|
*/
|
|
reg = <0 0 4>; /* device IO registers */
|
|
ti,nand-ecc-opt = "bch8";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <16>;
|
|
gpmc,device-width = <2>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <80>;
|
|
gpmc,cs-wr-off-ns = <80>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <60>;
|
|
gpmc,adv-wr-off-ns = <60>;
|
|
gpmc,we-on-ns = <10>;
|
|
gpmc,we-off-ns = <50>;
|
|
gpmc,oe-on-ns = <4>;
|
|
gpmc,oe-off-ns = <40>;
|
|
gpmc,access-ns = <40>;
|
|
gpmc,wr-access-ns = <80>;
|
|
gpmc,rd-cycle-ns = <80>;
|
|
gpmc,wr-cycle-ns = <80>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
/* MTD partition table */
|
|
/* All SPL-* partitions are sized to minimal length
|
|
* which can be independently programmable. For
|
|
* NAND flash this is equal to size of erase-block */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "NAND.SPL";
|
|
reg = <0x00000000 0x000020000>;
|
|
};
|
|
partition@1 {
|
|
label = "NAND.SPL.backup1";
|
|
reg = <0x00020000 0x00020000>;
|
|
};
|
|
partition@2 {
|
|
label = "NAND.SPL.backup2";
|
|
reg = <0x00040000 0x00020000>;
|
|
};
|
|
partition@3 {
|
|
label = "NAND.SPL.backup3";
|
|
reg = <0x00060000 0x00020000>;
|
|
};
|
|
partition@4 {
|
|
label = "NAND.u-boot-spl-os";
|
|
reg = <0x00080000 0x00040000>;
|
|
};
|
|
partition@5 {
|
|
label = "NAND.u-boot";
|
|
reg = <0x000c0000 0x00100000>;
|
|
};
|
|
partition@6 {
|
|
label = "NAND.u-boot-env";
|
|
reg = <0x001c0000 0x00020000>;
|
|
};
|
|
partition@7 {
|
|
label = "NAND.u-boot-env.backup1";
|
|
reg = <0x001e0000 0x00020000>;
|
|
};
|
|
partition@8 {
|
|
label = "NAND.kernel";
|
|
reg = <0x00200000 0x00800000>;
|
|
};
|
|
partition@9 {
|
|
label = "NAND.file-system";
|
|
reg = <0x00a00000 0x0f600000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
phy-supply = <&ldo4_reg>;
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
phy-supply = <&ldo4_reg>;
|
|
};
|
|
|
|
&omap_dwc3_1 {
|
|
extcon = <&extcon_usb1>;
|
|
};
|
|
|
|
&omap_dwc3_2 {
|
|
extcon = <&extcon_usb2>;
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "peripheral";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb1_pins>;
|
|
};
|
|
|
|
&usb2 {
|
|
dr_mode = "host";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb2_pins>;
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
vmmc-supply = <&evm_3v3_sd>;
|
|
vmmc_aux-supply = <&ldo1_reg>;
|
|
bus-width = <4>;
|
|
/*
|
|
* SDCD signal is not being used here - using the fact that GPIO mode
|
|
* is a viable alternative
|
|
*/
|
|
cd-gpios = <&gpio6 27 0>;
|
|
max-frequency = <192000000>;
|
|
};
|
|
|
|
&mmc2 {
|
|
/* SW5-3 in ON position */
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins_default>;
|
|
|
|
vmmc-supply = <&evm_3v3>;
|
|
bus-width = <8>;
|
|
ti,non-removable;
|
|
max-frequency = <192000000>;
|
|
};
|
|
|
|
&dra7_pmx_core {
|
|
cpsw_default: cpsw_default {
|
|
pinctrl-single,pins = <
|
|
/* Slave 2 */
|
|
0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
|
|
0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
|
|
0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
|
|
0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
|
|
0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
|
|
0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
|
|
0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
|
|
0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
|
|
0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
|
|
0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
|
|
0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
|
|
0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
|
|
>;
|
|
|
|
};
|
|
|
|
cpsw_sleep: cpsw_sleep {
|
|
pinctrl-single,pins = <
|
|
/* Slave 2 */
|
|
0x198 (MUX_MODE15)
|
|
0x19c (MUX_MODE15)
|
|
0x1a0 (MUX_MODE15)
|
|
0x1a4 (MUX_MODE15)
|
|
0x1a8 (MUX_MODE15)
|
|
0x1ac (MUX_MODE15)
|
|
0x1b0 (MUX_MODE15)
|
|
0x1b4 (MUX_MODE15)
|
|
0x1b8 (MUX_MODE15)
|
|
0x1bc (MUX_MODE15)
|
|
0x1c0 (MUX_MODE15)
|
|
0x1c4 (MUX_MODE15)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_default: davinci_mdio_default {
|
|
pinctrl-single,pins = <
|
|
/* MDIO */
|
|
0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
|
|
0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_sleep: davinci_mdio_sleep {
|
|
pinctrl-single,pins = <
|
|
0x23c (MUX_MODE15)
|
|
0x240 (MUX_MODE15)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&cpsw_default>;
|
|
pinctrl-1 = <&cpsw_sleep>;
|
|
slaves = <1>;
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <3>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&davinci_mdio_default>;
|
|
pinctrl-1 = <&davinci_mdio_sleep>;
|
|
};
|
|
|
|
&dcan1 {
|
|
status = "ok";
|
|
pinctrl-names = "default", "sleep", "active";
|
|
pinctrl-0 = <&dcan1_pins_sleep>;
|
|
pinctrl-1 = <&dcan1_pins_sleep>;
|
|
pinctrl-2 = <&dcan1_pins_default>;
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qspi1_pins>;
|
|
|
|
spi-max-frequency = <48000000>;
|
|
m25p80@0 {
|
|
compatible = "s25fl256s1";
|
|
spi-max-frequency = <48000000>;
|
|
reg = <0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* MTD partition table.
|
|
* The ROM checks the first four physical blocks
|
|
* for a valid file to boot and the flash here is
|
|
* 64KiB block size.
|
|
*/
|
|
partition@0 {
|
|
label = "QSPI.SPL";
|
|
reg = <0x00000000 0x000010000>;
|
|
};
|
|
partition@1 {
|
|
label = "QSPI.SPL.backup1";
|
|
reg = <0x00010000 0x00010000>;
|
|
};
|
|
partition@2 {
|
|
label = "QSPI.SPL.backup2";
|
|
reg = <0x00020000 0x00010000>;
|
|
};
|
|
partition@3 {
|
|
label = "QSPI.SPL.backup3";
|
|
reg = <0x00030000 0x00010000>;
|
|
};
|
|
partition@4 {
|
|
label = "QSPI.u-boot";
|
|
reg = <0x00040000 0x00100000>;
|
|
};
|
|
partition@5 {
|
|
label = "QSPI.u-boot-spl-os";
|
|
reg = <0x00140000 0x00080000>;
|
|
};
|
|
partition@6 {
|
|
label = "QSPI.u-boot-env";
|
|
reg = <0x001c0000 0x00010000>;
|
|
};
|
|
partition@7 {
|
|
label = "QSPI.u-boot-env.backup1";
|
|
reg = <0x001d0000 0x0010000>;
|
|
};
|
|
partition@8 {
|
|
label = "QSPI.kernel";
|
|
reg = <0x001e0000 0x0800000>;
|
|
};
|
|
partition@9 {
|
|
label = "QSPI.file-system";
|
|
reg = <0x009e0000 0x01620000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
|
|
vdda_video-supply = <&ldo5_reg>;
|
|
};
|
|
|
|
&hdmi {
|
|
status = "ok";
|
|
vdda-supply = <&ldo3_reg>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_pins>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
};
|
|
};
|
|
};
|