linux/drivers/net/wireless/iwlwifi/iwl-testmode.h
Wey-Yi Guy 6489854b9c iwlagn: add testmode set fixed rate command
Add support in testmode for setting fixed rate

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-13 12:02:20 -07:00

186 lines
6.7 KiB
C

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2010 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __IWL_TESTMODE_H__
#define __IWL_TESTMODE_H__
#include <linux/types.h>
/* Commands from user space to kernel space(IWL_TM_CMD_ID_APP2DEV_XX) and
* from and kernel space to user space(IWL_TM_CMD_ID_DEV2APP_XX).
* The command ID is carried with IWL_TM_ATTR_COMMAND. There are three types of
* of command from user space and two types of command from kernel space.
* See below.
*/
enum iwl_tm_cmd_t {
/* commands from user application to the uCode,
* the actual uCode host command ID is carried with
* IWL_TM_ATTR_UCODE_CMD_ID */
IWL_TM_CMD_APP2DEV_UCODE = 1,
/* commands from user applicaiton to access register */
IWL_TM_CMD_APP2DEV_REG_READ32,
IWL_TM_CMD_APP2DEV_REG_WRITE32,
IWL_TM_CMD_APP2DEV_REG_WRITE8,
/* commands fom user space for pure driver level operations */
IWL_TM_CMD_APP2DEV_GET_DEVICENAME,
IWL_TM_CMD_APP2DEV_LOAD_INIT_FW,
IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB,
IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW,
IWL_TM_CMD_APP2DEV_GET_EEPROM,
IWL_TM_CMD_APP2DEV_FIXRATE_REQ,
/* if there is other new command for the driver layer operation,
* append them here */
/* commands fom user space for uCode trace operations */
IWL_TM_CMD_APP2DEV_BEGIN_TRACE,
IWL_TM_CMD_APP2DEV_END_TRACE,
IWL_TM_CMD_APP2DEV_READ_TRACE,
/* commands from kernel space to carry the synchronous response
* to user application */
IWL_TM_CMD_DEV2APP_SYNC_RSP,
/* commands from kernel space to multicast the spontaneous messages
* to user application */
IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
/* commands from kernel space to carry the eeprom response
* to user application */
IWL_TM_CMD_DEV2APP_EEPROM_RSP,
IWL_TM_CMD_MAX,
};
enum iwl_tm_attr_t {
IWL_TM_ATTR_NOT_APPLICABLE = 0,
/* From user space to kernel space:
* the command either destines to ucode, driver, or register;
* See enum iwl_tm_cmd_t.
*
* From kernel space to user space:
* the command either carries synchronous response,
* or the spontaneous message multicast from the device;
* See enum iwl_tm_cmd_t. */
IWL_TM_ATTR_COMMAND,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE,
* The mandatory fields are :
* IWL_TM_ATTR_UCODE_CMD_ID for recognizable command ID;
* IWL_TM_ATTR_COMMAND_FLAG for the flags of the commands;
* The optional fields are:
* IWL_TM_ATTR_UCODE_CMD_DATA for the actual command payload
* to the ucode */
IWL_TM_ATTR_UCODE_CMD_ID,
IWL_TM_ATTR_UCODE_CMD_DATA,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_XXX,
* The mandatory fields are:
* IWL_TM_ATTR_REG_OFFSET for the offset of the target register;
* IWL_TM_ATTR_REG_VALUE8 or IWL_TM_ATTR_REG_VALUE32 for value */
IWL_TM_ATTR_REG_OFFSET,
IWL_TM_ATTR_REG_VALUE8,
IWL_TM_ATTR_REG_VALUE32,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_SYNC_RSP,
* The mandatory fields are:
* IWL_TM_ATTR_SYNC_RSP for the data content responding to the user
* application command */
IWL_TM_ATTR_SYNC_RSP,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
* The mandatory fields are:
* IWL_TM_ATTR_UCODE_RX_PKT for the data content multicast to the user
* application */
IWL_TM_ATTR_UCODE_RX_PKT,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_EEPROM,
* The mandatory fields are:
* IWL_TM_ATTR_EEPROM for the data content responging to the user
* application */
IWL_TM_ATTR_EEPROM,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_XXX_TRACE,
* The mandatory fields are:
* IWL_TM_ATTR_MEM_TRACE_ADDR for the trace address
*/
IWL_TM_ATTR_TRACE_ADDR,
IWL_TM_ATTR_TRACE_DATA,
/* When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_FIXRATE_REQ,
* The mandatory fields are:
* IWL_TM_ATTR_FIXRATE for the fixed rate
*/
IWL_TM_ATTR_FIXRATE,
IWL_TM_ATTR_MAX,
};
/* uCode trace buffer */
#define TRACE_BUFF_SIZE 0x20000
#define TRACE_BUFF_PADD 0x2000
#define TRACE_TOTAL_SIZE (TRACE_BUFF_SIZE + TRACE_BUFF_PADD)
#endif