mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 17:54:13 +08:00
35d0179474
The rt3352 has a pin that can be used as second spi chip select, watchdog reset or GPIO. The pinmux setup was missing the definition of said pin. The pin is configured via the same bit on rt5350, so reuse the existing macro. Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20301/ Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
281 lines
8.6 KiB
C
281 lines
8.6 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Parts of this file are based on Ralink's 2.6.21 BSP
|
|
*
|
|
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
* Copyright (C) 2013 John Crispin <john@phrozen.org>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bug.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/mach-ralink/ralink_regs.h>
|
|
#include <asm/mach-ralink/rt305x.h>
|
|
#include <asm/mach-ralink/pinmux.h>
|
|
|
|
#include "common.h"
|
|
|
|
static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
|
|
static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
|
|
static struct rt2880_pmx_func uartf_func[] = {
|
|
FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
|
|
FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
|
|
FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
|
|
FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
|
|
FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
|
|
FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
|
|
FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
|
|
};
|
|
static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
|
|
static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
|
|
static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
|
|
static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
|
|
static struct rt2880_pmx_func rt5350_cs1_func[] = {
|
|
FUNC("spi_cs1", 0, 27, 1),
|
|
FUNC("wdg_cs1", 1, 27, 1),
|
|
};
|
|
static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
|
|
static struct rt2880_pmx_func rt3352_rgmii_func[] = {
|
|
FUNC("rgmii", 0, 24, 12)
|
|
};
|
|
static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
|
|
static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
|
|
static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
|
|
static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
|
|
static struct rt2880_pmx_func rt3352_cs1_func[] = {
|
|
FUNC("spi_cs1", 0, 45, 1),
|
|
FUNC("wdg_cs1", 1, 45, 1),
|
|
};
|
|
|
|
static struct rt2880_pmx_group rt3050_pinmux_data[] = {
|
|
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
|
|
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
|
|
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
|
|
RT305X_GPIO_MODE_UART0_SHIFT),
|
|
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
|
|
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
|
|
GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
|
|
GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
|
|
GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
|
|
{ 0 }
|
|
};
|
|
|
|
static struct rt2880_pmx_group rt3352_pinmux_data[] = {
|
|
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
|
|
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
|
|
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
|
|
RT305X_GPIO_MODE_UART0_SHIFT),
|
|
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
|
|
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
|
|
GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
|
|
GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
|
|
GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
|
|
GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
|
|
GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
|
|
GRP("spi_cs1", rt3352_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
|
|
{ 0 }
|
|
};
|
|
|
|
static struct rt2880_pmx_group rt5350_pinmux_data[] = {
|
|
GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
|
|
GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
|
|
GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
|
|
RT305X_GPIO_MODE_UART0_SHIFT),
|
|
GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
|
|
GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
|
|
GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
|
|
GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
|
|
{ 0 }
|
|
};
|
|
|
|
static unsigned long rt5350_get_mem_size(void)
|
|
{
|
|
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
|
|
unsigned long ret;
|
|
u32 t;
|
|
|
|
t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
|
|
t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
|
|
RT5350_SYSCFG0_DRAM_SIZE_MASK;
|
|
|
|
switch (t) {
|
|
case RT5350_SYSCFG0_DRAM_SIZE_2M:
|
|
ret = 2;
|
|
break;
|
|
case RT5350_SYSCFG0_DRAM_SIZE_8M:
|
|
ret = 8;
|
|
break;
|
|
case RT5350_SYSCFG0_DRAM_SIZE_16M:
|
|
ret = 16;
|
|
break;
|
|
case RT5350_SYSCFG0_DRAM_SIZE_32M:
|
|
ret = 32;
|
|
break;
|
|
case RT5350_SYSCFG0_DRAM_SIZE_64M:
|
|
ret = 64;
|
|
break;
|
|
default:
|
|
panic("rt5350: invalid DRAM size: %u", t);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
void __init ralink_clk_init(void)
|
|
{
|
|
unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
|
|
unsigned long wmac_rate = 40000000;
|
|
|
|
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
|
|
|
|
if (soc_is_rt305x() || soc_is_rt3350()) {
|
|
t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
|
|
RT305X_SYSCFG_CPUCLK_MASK;
|
|
switch (t) {
|
|
case RT305X_SYSCFG_CPUCLK_LOW:
|
|
cpu_rate = 320000000;
|
|
break;
|
|
case RT305X_SYSCFG_CPUCLK_HIGH:
|
|
cpu_rate = 384000000;
|
|
break;
|
|
}
|
|
sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
|
|
} else if (soc_is_rt3352()) {
|
|
t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
|
|
RT3352_SYSCFG0_CPUCLK_MASK;
|
|
switch (t) {
|
|
case RT3352_SYSCFG0_CPUCLK_LOW:
|
|
cpu_rate = 384000000;
|
|
break;
|
|
case RT3352_SYSCFG0_CPUCLK_HIGH:
|
|
cpu_rate = 400000000;
|
|
break;
|
|
}
|
|
sys_rate = wdt_rate = cpu_rate / 3;
|
|
uart_rate = 40000000;
|
|
} else if (soc_is_rt5350()) {
|
|
t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
|
|
RT5350_SYSCFG0_CPUCLK_MASK;
|
|
switch (t) {
|
|
case RT5350_SYSCFG0_CPUCLK_360:
|
|
cpu_rate = 360000000;
|
|
sys_rate = cpu_rate / 3;
|
|
break;
|
|
case RT5350_SYSCFG0_CPUCLK_320:
|
|
cpu_rate = 320000000;
|
|
sys_rate = cpu_rate / 4;
|
|
break;
|
|
case RT5350_SYSCFG0_CPUCLK_300:
|
|
cpu_rate = 300000000;
|
|
sys_rate = cpu_rate / 3;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
uart_rate = 40000000;
|
|
wdt_rate = sys_rate;
|
|
} else {
|
|
BUG();
|
|
}
|
|
|
|
if (soc_is_rt3352() || soc_is_rt5350()) {
|
|
u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
|
|
|
|
if (!(val & RT3352_CLKCFG0_XTAL_SEL))
|
|
wmac_rate = 20000000;
|
|
}
|
|
|
|
ralink_clk_add("cpu", cpu_rate);
|
|
ralink_clk_add("sys", sys_rate);
|
|
ralink_clk_add("10000900.i2c", uart_rate);
|
|
ralink_clk_add("10000a00.i2s", uart_rate);
|
|
ralink_clk_add("10000b00.spi", sys_rate);
|
|
ralink_clk_add("10000b40.spi", sys_rate);
|
|
ralink_clk_add("10000100.timer", wdt_rate);
|
|
ralink_clk_add("10000120.watchdog", wdt_rate);
|
|
ralink_clk_add("10000500.uart", uart_rate);
|
|
ralink_clk_add("10000c00.uartlite", uart_rate);
|
|
ralink_clk_add("10100000.ethernet", sys_rate);
|
|
ralink_clk_add("10180000.wmac", wmac_rate);
|
|
}
|
|
|
|
void __init ralink_of_remap(void)
|
|
{
|
|
rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
|
|
rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc");
|
|
|
|
if (!rt_sysc_membase || !rt_memc_membase)
|
|
panic("Failed to remap core resources");
|
|
}
|
|
|
|
void prom_soc_init(struct ralink_soc_info *soc_info)
|
|
{
|
|
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
|
|
unsigned char *name;
|
|
u32 n0;
|
|
u32 n1;
|
|
u32 id;
|
|
|
|
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
|
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
|
|
|
if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
|
|
unsigned long icache_sets;
|
|
|
|
icache_sets = (read_c0_config1() >> 22) & 7;
|
|
if (icache_sets == 1) {
|
|
ralink_soc = RT305X_SOC_RT3050;
|
|
name = "RT3050";
|
|
soc_info->compatible = "ralink,rt3050-soc";
|
|
} else {
|
|
ralink_soc = RT305X_SOC_RT3052;
|
|
name = "RT3052";
|
|
soc_info->compatible = "ralink,rt3052-soc";
|
|
}
|
|
} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
|
|
ralink_soc = RT305X_SOC_RT3350;
|
|
name = "RT3350";
|
|
soc_info->compatible = "ralink,rt3350-soc";
|
|
} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
|
|
ralink_soc = RT305X_SOC_RT3352;
|
|
name = "RT3352";
|
|
soc_info->compatible = "ralink,rt3352-soc";
|
|
} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
|
|
ralink_soc = RT305X_SOC_RT5350;
|
|
name = "RT5350";
|
|
soc_info->compatible = "ralink,rt5350-soc";
|
|
} else {
|
|
panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
|
|
}
|
|
|
|
id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
|
|
|
|
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
|
"Ralink %s id:%u rev:%u",
|
|
name,
|
|
(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
|
|
(id & CHIP_ID_REV_MASK));
|
|
|
|
soc_info->mem_base = RT305X_SDRAM_BASE;
|
|
if (soc_is_rt5350()) {
|
|
soc_info->mem_size = rt5350_get_mem_size();
|
|
rt2880_pinmux_data = rt5350_pinmux_data;
|
|
} else if (soc_is_rt305x() || soc_is_rt3350()) {
|
|
soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
|
|
soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
|
|
rt2880_pinmux_data = rt3050_pinmux_data;
|
|
} else if (soc_is_rt3352()) {
|
|
soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
|
|
soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
|
|
rt2880_pinmux_data = rt3352_pinmux_data;
|
|
}
|
|
}
|