mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
f0c4ac1329
The LP1 suspend procedure is the same with Tegra30 and Tegra114. Just need to update the difference of the register address, then we can continue to share the code. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
831 lines
21 KiB
ArmAsm
831 lines
21 KiB
ArmAsm
/*
|
|
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cache.h>
|
|
|
|
#include "irammap.h"
|
|
#include "fuse.h"
|
|
#include "sleep.h"
|
|
#include "flowctrl.h"
|
|
|
|
#define EMC_CFG 0xc
|
|
#define EMC_ADR_CFG 0x10
|
|
#define EMC_TIMING_CONTROL 0x28
|
|
#define EMC_REFRESH 0x70
|
|
#define EMC_NOP 0xdc
|
|
#define EMC_SELF_REF 0xe0
|
|
#define EMC_MRW 0xe8
|
|
#define EMC_FBIO_CFG5 0x104
|
|
#define EMC_AUTO_CAL_CONFIG 0x2a4
|
|
#define EMC_AUTO_CAL_INTERVAL 0x2a8
|
|
#define EMC_AUTO_CAL_STATUS 0x2ac
|
|
#define EMC_REQ_CTRL 0x2b0
|
|
#define EMC_CFG_DIG_DLL 0x2bc
|
|
#define EMC_EMC_STATUS 0x2b4
|
|
#define EMC_ZCAL_INTERVAL 0x2e0
|
|
#define EMC_ZQ_CAL 0x2ec
|
|
#define EMC_XM2VTTGENPADCTRL 0x310
|
|
#define EMC_XM2VTTGENPADCTRL2 0x314
|
|
|
|
#define PMC_CTRL 0x0
|
|
#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
|
|
|
|
#define PMC_PLLP_WB0_OVERRIDE 0xf8
|
|
#define PMC_IO_DPD_REQ 0x1b8
|
|
#define PMC_IO_DPD_STATUS 0x1bc
|
|
|
|
#define CLK_RESET_CCLK_BURST 0x20
|
|
#define CLK_RESET_CCLK_DIVIDER 0x24
|
|
#define CLK_RESET_SCLK_BURST 0x28
|
|
#define CLK_RESET_SCLK_DIVIDER 0x2c
|
|
|
|
#define CLK_RESET_PLLC_BASE 0x80
|
|
#define CLK_RESET_PLLC_MISC 0x8c
|
|
#define CLK_RESET_PLLM_BASE 0x90
|
|
#define CLK_RESET_PLLM_MISC 0x9c
|
|
#define CLK_RESET_PLLP_BASE 0xa0
|
|
#define CLK_RESET_PLLP_MISC 0xac
|
|
#define CLK_RESET_PLLA_BASE 0xb0
|
|
#define CLK_RESET_PLLA_MISC 0xbc
|
|
#define CLK_RESET_PLLX_BASE 0xe0
|
|
#define CLK_RESET_PLLX_MISC 0xe4
|
|
#define CLK_RESET_PLLX_MISC3 0x518
|
|
#define CLK_RESET_PLLX_MISC3_IDDQ 3
|
|
#define CLK_RESET_PLLM_MISC_IDDQ 5
|
|
#define CLK_RESET_PLLC_MISC_IDDQ 26
|
|
|
|
#define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4
|
|
|
|
#define MSELECT_CLKM (0x3 << 30)
|
|
|
|
#define LOCK_DELAY 50 /* safety delay after lock is detected */
|
|
|
|
#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
|
|
|
|
.macro emc_device_mask, rd, base
|
|
ldr \rd, [\base, #EMC_ADR_CFG]
|
|
tst \rd, #0x1
|
|
moveq \rd, #(0x1 << 8) @ just 1 device
|
|
movne \rd, #(0x3 << 8) @ 2 devices
|
|
.endm
|
|
|
|
.macro emc_timing_update, rd, base
|
|
mov \rd, #1
|
|
str \rd, [\base, #EMC_TIMING_CONTROL]
|
|
1001:
|
|
ldr \rd, [\base, #EMC_EMC_STATUS]
|
|
tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
|
|
bne 1001b
|
|
.endm
|
|
|
|
.macro pll_enable, rd, r_car_base, pll_base, pll_misc
|
|
ldr \rd, [\r_car_base, #\pll_base]
|
|
tst \rd, #(1 << 30)
|
|
orreq \rd, \rd, #(1 << 30)
|
|
streq \rd, [\r_car_base, #\pll_base]
|
|
/* Enable lock detector */
|
|
.if \pll_misc
|
|
ldr \rd, [\r_car_base, #\pll_misc]
|
|
bic \rd, \rd, #(1 << 18)
|
|
str \rd, [\r_car_base, #\pll_misc]
|
|
ldr \rd, [\r_car_base, #\pll_misc]
|
|
ldr \rd, [\r_car_base, #\pll_misc]
|
|
orr \rd, \rd, #(1 << 18)
|
|
str \rd, [\r_car_base, #\pll_misc]
|
|
.endif
|
|
.endm
|
|
|
|
.macro pll_locked, rd, r_car_base, pll_base
|
|
1:
|
|
ldr \rd, [\r_car_base, #\pll_base]
|
|
tst \rd, #(1 << 27)
|
|
beq 1b
|
|
.endm
|
|
|
|
.macro pll_iddq_exit, rd, car, iddq, iddq_bit
|
|
ldr \rd, [\car, #\iddq]
|
|
bic \rd, \rd, #(1<<\iddq_bit)
|
|
str \rd, [\car, #\iddq]
|
|
.endm
|
|
|
|
.macro pll_iddq_entry, rd, car, iddq, iddq_bit
|
|
ldr \rd, [\car, #\iddq]
|
|
orr \rd, \rd, #(1<<\iddq_bit)
|
|
str \rd, [\car, #\iddq]
|
|
.endm
|
|
|
|
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
|
|
/*
|
|
* tegra30_hotplug_shutdown(void)
|
|
*
|
|
* Powergates the current CPU.
|
|
* Should never return.
|
|
*/
|
|
ENTRY(tegra30_hotplug_shutdown)
|
|
/* Powergate this CPU */
|
|
mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
|
|
bl tegra30_cpu_shutdown
|
|
mov pc, lr @ should never get here
|
|
ENDPROC(tegra30_hotplug_shutdown)
|
|
|
|
/*
|
|
* tegra30_cpu_shutdown(unsigned long flags)
|
|
*
|
|
* Puts the current CPU in wait-for-event mode on the flow controller
|
|
* and powergates it -- flags (in R0) indicate the request type.
|
|
*
|
|
* r10 = SoC ID
|
|
* corrupts r0-r4, r10-r12
|
|
*/
|
|
ENTRY(tegra30_cpu_shutdown)
|
|
cpu_id r3
|
|
tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10
|
|
cmp r10, #TEGRA30
|
|
bne _no_cpu0_chk @ It's not Tegra30
|
|
|
|
cmp r3, #0
|
|
moveq pc, lr @ Must never be called for CPU 0
|
|
_no_cpu0_chk:
|
|
|
|
ldr r12, =TEGRA_FLOW_CTRL_VIRT
|
|
cpu_to_csr_reg r1, r3
|
|
add r1, r1, r12 @ virtual CSR address for this CPU
|
|
cpu_to_halt_reg r2, r3
|
|
add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU
|
|
|
|
/*
|
|
* Clear this CPU's "event" and "interrupt" flags and power gate
|
|
* it when halting but not before it is in the "WFE" state.
|
|
*/
|
|
movw r12, \
|
|
FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
|
|
FLOW_CTRL_CSR_ENABLE
|
|
cmp r10, #TEGRA30
|
|
moveq r4, #(1 << 4) @ wfe bitmap
|
|
movne r4, #(1 << 8) @ wfi bitmap
|
|
ARM( orr r12, r12, r4, lsl r3 )
|
|
THUMB( lsl r4, r4, r3 )
|
|
THUMB( orr r12, r12, r4 )
|
|
str r12, [r1]
|
|
|
|
/* Halt this CPU. */
|
|
mov r3, #0x400
|
|
delay_1:
|
|
subs r3, r3, #1 @ delay as a part of wfe war.
|
|
bge delay_1;
|
|
cpsid a @ disable imprecise aborts.
|
|
ldr r3, [r1] @ read CSR
|
|
str r3, [r1] @ clear CSR
|
|
|
|
tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
|
|
beq flow_ctrl_setting_for_lp2
|
|
|
|
/* flow controller set up for hotplug */
|
|
mov r3, #FLOW_CTRL_WAITEVENT @ For hotplug
|
|
b flow_ctrl_done
|
|
flow_ctrl_setting_for_lp2:
|
|
/* flow controller set up for LP2 */
|
|
cmp r10, #TEGRA30
|
|
moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2
|
|
movne r3, #FLOW_CTRL_WAITEVENT
|
|
orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
|
|
orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
|
|
flow_ctrl_done:
|
|
cmp r10, #TEGRA30
|
|
str r3, [r2]
|
|
ldr r0, [r2]
|
|
b wfe_war
|
|
|
|
__cpu_reset_again:
|
|
dsb
|
|
.align 5
|
|
wfeeq @ CPU should be power gated here
|
|
wfine
|
|
wfe_war:
|
|
b __cpu_reset_again
|
|
|
|
/*
|
|
* 38 nop's, which fills reset of wfe cache line and
|
|
* 4 more cachelines with nop
|
|
*/
|
|
.rept 38
|
|
nop
|
|
.endr
|
|
b . @ should never get here
|
|
|
|
ENDPROC(tegra30_cpu_shutdown)
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* tegra30_sleep_core_finish(unsigned long v2p)
|
|
*
|
|
* Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
|
|
* tegra30_tear_down_core in IRAM
|
|
*/
|
|
ENTRY(tegra30_sleep_core_finish)
|
|
/* Flush, disable the L1 data cache and exit SMP */
|
|
bl tegra_disable_clean_inv_dcache
|
|
|
|
/*
|
|
* Preload all the address literals that are needed for the
|
|
* CPU power-gating process, to avoid loading from SDRAM which
|
|
* are not supported once SDRAM is put into self-refresh.
|
|
* LP0 / LP1 use physical address, since the MMU needs to be
|
|
* disabled before putting SDRAM into self-refresh to avoid
|
|
* memory access due to page table walks.
|
|
*/
|
|
mov32 r4, TEGRA_PMC_BASE
|
|
mov32 r5, TEGRA_CLK_RESET_BASE
|
|
mov32 r6, TEGRA_FLOW_CTRL_BASE
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
|
|
mov32 r3, tegra_shut_off_mmu
|
|
add r3, r3, r0
|
|
|
|
mov32 r0, tegra30_tear_down_core
|
|
mov32 r1, tegra30_iram_start
|
|
sub r0, r0, r1
|
|
mov32 r1, TEGRA_IRAM_LPx_RESUME_AREA
|
|
add r0, r0, r1
|
|
|
|
mov pc, r3
|
|
ENDPROC(tegra30_sleep_core_finish)
|
|
|
|
/*
|
|
* tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
|
|
*
|
|
* Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
|
|
*/
|
|
ENTRY(tegra30_sleep_cpu_secondary_finish)
|
|
mov r7, lr
|
|
|
|
/* Flush and disable the L1 data cache */
|
|
mov r0, #TEGRA_FLUSH_CACHE_LOUIS
|
|
bl tegra_disable_clean_inv_dcache
|
|
|
|
/* Powergate this CPU. */
|
|
mov r0, #0 @ power mode flags (!hotplug)
|
|
bl tegra30_cpu_shutdown
|
|
mov r0, #1 @ never return here
|
|
mov pc, r7
|
|
ENDPROC(tegra30_sleep_cpu_secondary_finish)
|
|
|
|
/*
|
|
* tegra30_tear_down_cpu
|
|
*
|
|
* Switches the CPU to enter sleep.
|
|
*/
|
|
ENTRY(tegra30_tear_down_cpu)
|
|
mov32 r6, TEGRA_FLOW_CTRL_BASE
|
|
|
|
b tegra30_enter_sleep
|
|
ENDPROC(tegra30_tear_down_cpu)
|
|
|
|
/* START OF ROUTINES COPIED TO IRAM */
|
|
.align L1_CACHE_SHIFT
|
|
.globl tegra30_iram_start
|
|
tegra30_iram_start:
|
|
|
|
/*
|
|
* tegra30_lp1_reset
|
|
*
|
|
* reset vector for LP1 restore; copied into IRAM during suspend.
|
|
* Brings the system back up to a safe staring point (SDRAM out of
|
|
* self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
|
|
* system clock running on the same PLL that it suspended at), and
|
|
* jumps to tegra_resume to restore virtual addressing.
|
|
* The physical address of tegra_resume expected to be stored in
|
|
* PMC_SCRATCH41.
|
|
*
|
|
* NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
|
|
*/
|
|
ENTRY(tegra30_lp1_reset)
|
|
/*
|
|
* The CPU and system bus are running at 32KHz and executing from
|
|
* IRAM when this code is executed; immediately switch to CLKM and
|
|
* enable PLLP, PLLM, PLLC, PLLA and PLLX.
|
|
*/
|
|
mov32 r0, TEGRA_CLK_RESET_BASE
|
|
|
|
mov r1, #(1 << 28)
|
|
str r1, [r0, #CLK_RESET_SCLK_BURST]
|
|
str r1, [r0, #CLK_RESET_CCLK_BURST]
|
|
mov r1, #0
|
|
str r1, [r0, #CLK_RESET_CCLK_DIVIDER]
|
|
str r1, [r0, #CLK_RESET_SCLK_DIVIDER]
|
|
|
|
tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
|
|
cmp r10, #TEGRA30
|
|
beq _no_pll_iddq_exit
|
|
|
|
pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
|
|
pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
|
|
pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
|
|
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
ldr r1, [r7]
|
|
add r1, r1, #2
|
|
wait_until r1, r7, r3
|
|
|
|
/* enable PLLM via PMC */
|
|
mov32 r2, TEGRA_PMC_BASE
|
|
ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
orr r1, r1, #(1 << 12)
|
|
str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
|
|
pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
|
|
pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
|
|
pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
|
|
|
|
b _pll_m_c_x_done
|
|
|
|
_no_pll_iddq_exit:
|
|
/* enable PLLM via PMC */
|
|
mov32 r2, TEGRA_PMC_BASE
|
|
ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
orr r1, r1, #(1 << 12)
|
|
str r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
|
|
|
|
pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
|
|
pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
|
|
pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC
|
|
|
|
_pll_m_c_x_done:
|
|
pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
|
|
pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
|
|
|
|
pll_locked r1, r0, CLK_RESET_PLLM_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLP_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLA_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLC_BASE
|
|
pll_locked r1, r0, CLK_RESET_PLLX_BASE
|
|
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
ldr r1, [r7]
|
|
add r1, r1, #LOCK_DELAY
|
|
wait_until r1, r7, r3
|
|
|
|
adr r5, tegra_sdram_pad_save
|
|
|
|
ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT
|
|
str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
|
|
|
|
ldr r4, [r5, #0x1C] @ restore SCLK_BURST
|
|
str r4, [r0, #CLK_RESET_SCLK_BURST]
|
|
|
|
cmp r10, #TEGRA30
|
|
movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX
|
|
movteq r4, #:upper16:((1 << 28) | (0x8))
|
|
movwne r4, #:lower16:((1 << 28) | (0xe))
|
|
movtne r4, #:upper16:((1 << 28) | (0xe))
|
|
str r4, [r0, #CLK_RESET_CCLK_BURST]
|
|
|
|
/* Restore pad power state to normal */
|
|
ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS
|
|
mvn r1, r1
|
|
bic r1, r1, #(1 << 31)
|
|
orr r1, r1, #(1 << 30)
|
|
str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF
|
|
|
|
cmp r10, #TEGRA30
|
|
movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base
|
|
movteq r0, #:upper16:TEGRA_EMC_BASE
|
|
cmp r10, #TEGRA114
|
|
movweq r0, #:lower16:TEGRA_EMC0_BASE
|
|
movteq r0, #:upper16:TEGRA_EMC0_BASE
|
|
cmp r10, #TEGRA124
|
|
movweq r0, #:lower16:TEGRA124_EMC_BASE
|
|
movteq r0, #:upper16:TEGRA124_EMC_BASE
|
|
|
|
exit_self_refresh:
|
|
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
|
|
ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
|
|
ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL
|
|
str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
|
|
|
|
/* Relock DLL */
|
|
ldr r1, [r0, #EMC_CFG_DIG_DLL]
|
|
orr r1, r1, #(1 << 30) @ set DLL_RESET
|
|
str r1, [r0, #EMC_CFG_DIG_DLL]
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
cmp r10, #TEGRA114
|
|
movweq r1, #:lower16:TEGRA_EMC1_BASE
|
|
movteq r1, #:upper16:TEGRA_EMC1_BASE
|
|
cmpeq r0, r1
|
|
|
|
ldr r1, [r0, #EMC_AUTO_CAL_CONFIG]
|
|
orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE
|
|
orreq r1, r1, #(1 << 27) @ set slave mode for channel 1
|
|
str r1, [r0, #EMC_AUTO_CAL_CONFIG]
|
|
|
|
emc_wait_auto_cal_onetime:
|
|
ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
|
|
tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
|
|
bne emc_wait_auto_cal_onetime
|
|
|
|
ldr r1, [r0, #EMC_CFG]
|
|
bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD
|
|
str r1, [r0, #EMC_CFG]
|
|
|
|
mov r1, #0
|
|
str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh
|
|
mov r1, #1
|
|
cmp r10, #TEGRA30
|
|
streq r1, [r0, #EMC_NOP]
|
|
streq r1, [r0, #EMC_NOP]
|
|
streq r1, [r0, #EMC_REFRESH]
|
|
|
|
emc_device_mask r1, r0
|
|
|
|
exit_selfrefresh_loop:
|
|
ldr r2, [r0, #EMC_EMC_STATUS]
|
|
ands r2, r2, r1
|
|
bne exit_selfrefresh_loop
|
|
|
|
lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1
|
|
|
|
mov32 r7, TEGRA_TMRUS_BASE
|
|
ldr r2, [r0, #EMC_FBIO_CFG5]
|
|
|
|
and r2, r2, #3 @ check DRAM_TYPE
|
|
cmp r2, #2
|
|
beq emc_lpddr2
|
|
|
|
/* Issue a ZQ_CAL for dev0 - DDR3 */
|
|
mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1
|
|
str r2, [r0, #EMC_ZQ_CAL]
|
|
ldr r2, [r7]
|
|
add r2, r2, #10
|
|
wait_until r2, r7, r3
|
|
|
|
tst r1, #2
|
|
beq zcal_done
|
|
|
|
/* Issue a ZQ_CAL for dev1 - DDR3 */
|
|
mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1
|
|
str r2, [r0, #EMC_ZQ_CAL]
|
|
ldr r2, [r7]
|
|
add r2, r2, #10
|
|
wait_until r2, r7, r3
|
|
b zcal_done
|
|
|
|
emc_lpddr2:
|
|
/* Issue a ZQ_CAL for dev0 - LPDDR2 */
|
|
mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB
|
|
str r2, [r0, #EMC_MRW]
|
|
ldr r2, [r7]
|
|
add r2, r2, #1
|
|
wait_until r2, r7, r3
|
|
|
|
tst r1, #2
|
|
beq zcal_done
|
|
|
|
/* Issue a ZQ_CAL for dev0 - LPDDR2 */
|
|
mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB
|
|
str r2, [r0, #EMC_MRW]
|
|
ldr r2, [r7]
|
|
add r2, r2, #1
|
|
wait_until r2, r7, r3
|
|
|
|
zcal_done:
|
|
mov r1, #0 @ unstall all transactions
|
|
str r1, [r0, #EMC_REQ_CTRL]
|
|
ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL
|
|
str r1, [r0, #EMC_ZCAL_INTERVAL]
|
|
ldr r1, [r5, #0x0] @ restore EMC_CFG
|
|
str r1, [r0, #EMC_CFG]
|
|
|
|
/* Tegra114 had dual EMC channel, now config the other one */
|
|
cmp r10, #TEGRA114
|
|
bne __no_dual_emc_chanl
|
|
mov32 r1, TEGRA_EMC1_BASE
|
|
cmp r0, r1
|
|
movne r0, r1
|
|
addne r5, r5, #0x20
|
|
bne exit_self_refresh
|
|
__no_dual_emc_chanl:
|
|
|
|
mov32 r0, TEGRA_PMC_BASE
|
|
ldr r0, [r0, #PMC_SCRATCH41]
|
|
mov pc, r0 @ jump to tegra_resume
|
|
ENDPROC(tegra30_lp1_reset)
|
|
|
|
.align L1_CACHE_SHIFT
|
|
tegra30_sdram_pad_address:
|
|
.word TEGRA_EMC_BASE + EMC_CFG @0x0
|
|
.word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
|
|
.word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
|
|
.word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
|
|
.word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
|
|
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
|
|
tegra30_sdram_pad_address_end:
|
|
|
|
tegra114_sdram_pad_address:
|
|
.word TEGRA_EMC0_BASE + EMC_CFG @0x0
|
|
.word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4
|
|
.word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8
|
|
.word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc
|
|
.word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
|
|
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
|
|
.word TEGRA_EMC1_BASE + EMC_CFG @0x20
|
|
.word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24
|
|
.word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
|
|
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
|
|
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
|
|
tegra114_sdram_pad_adress_end:
|
|
|
|
tegra124_sdram_pad_address:
|
|
.word TEGRA124_EMC_BASE + EMC_CFG @0x0
|
|
.word TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL @0x4
|
|
.word TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8
|
|
.word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc
|
|
.word TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10
|
|
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
|
|
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
|
|
tegra124_sdram_pad_address_end:
|
|
|
|
tegra30_sdram_pad_size:
|
|
.word tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
|
|
|
|
tegra114_sdram_pad_size:
|
|
.word tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
|
|
|
|
.type tegra_sdram_pad_save, %object
|
|
tegra_sdram_pad_save:
|
|
.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
|
|
.long 0
|
|
.endr
|
|
|
|
/*
|
|
* tegra30_tear_down_core
|
|
*
|
|
* copied into and executed from IRAM
|
|
* puts memory in self-refresh for LP0 and LP1
|
|
*/
|
|
tegra30_tear_down_core:
|
|
bl tegra30_sdram_self_refresh
|
|
bl tegra30_switch_cpu_to_clk32k
|
|
b tegra30_enter_sleep
|
|
|
|
/*
|
|
* tegra30_switch_cpu_to_clk32k
|
|
*
|
|
* In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
|
|
* to the 32KHz clock.
|
|
* r4 = TEGRA_PMC_BASE
|
|
* r5 = TEGRA_CLK_RESET_BASE
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
* r7 = TEGRA_TMRUS_BASE
|
|
* r10= SoC ID
|
|
*/
|
|
tegra30_switch_cpu_to_clk32k:
|
|
/*
|
|
* start by jumping to CLKM to safely disable PLLs, then jump to
|
|
* CLKS.
|
|
*/
|
|
mov r0, #(1 << 28)
|
|
str r0, [r5, #CLK_RESET_SCLK_BURST]
|
|
/* 2uS delay delay between changing SCLK and CCLK */
|
|
ldr r1, [r7]
|
|
add r1, r1, #2
|
|
wait_until r1, r7, r9
|
|
str r0, [r5, #CLK_RESET_CCLK_BURST]
|
|
mov r0, #0
|
|
str r0, [r5, #CLK_RESET_CCLK_DIVIDER]
|
|
str r0, [r5, #CLK_RESET_SCLK_DIVIDER]
|
|
|
|
/* switch the clock source of mselect to be CLK_M */
|
|
ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
|
|
orr r0, r0, #MSELECT_CLKM
|
|
str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
|
|
|
|
/* 2uS delay delay between changing SCLK and disabling PLLs */
|
|
ldr r1, [r7]
|
|
add r1, r1, #2
|
|
wait_until r1, r7, r9
|
|
|
|
/* disable PLLM via PMC in LP1 */
|
|
ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
|
|
bic r0, r0, #(1 << 12)
|
|
str r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
|
|
|
|
/* disable PLLP, PLLA, PLLC and PLLX */
|
|
ldr r0, [r5, #CLK_RESET_PLLP_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLP_BASE]
|
|
ldr r0, [r5, #CLK_RESET_PLLA_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLA_BASE]
|
|
ldr r0, [r5, #CLK_RESET_PLLC_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLC_BASE]
|
|
ldr r0, [r5, #CLK_RESET_PLLX_BASE]
|
|
bic r0, r0, #(1 << 30)
|
|
str r0, [r5, #CLK_RESET_PLLX_BASE]
|
|
|
|
cmp r10, #TEGRA30
|
|
beq _no_pll_in_iddq
|
|
pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
|
|
_no_pll_in_iddq:
|
|
|
|
/* switch to CLKS */
|
|
mov r0, #0 /* brust policy = 32KHz */
|
|
str r0, [r5, #CLK_RESET_SCLK_BURST]
|
|
|
|
mov pc, lr
|
|
|
|
/*
|
|
* tegra30_enter_sleep
|
|
*
|
|
* uses flow controller to enter sleep state
|
|
* executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
|
|
* executes from SDRAM with target state is LP2
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
*/
|
|
tegra30_enter_sleep:
|
|
cpu_id r1
|
|
|
|
cpu_to_csr_reg r2, r1
|
|
ldr r0, [r6, r2]
|
|
orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
|
|
orr r0, r0, #FLOW_CTRL_CSR_ENABLE
|
|
str r0, [r6, r2]
|
|
|
|
tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
|
|
cmp r10, #TEGRA30
|
|
mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
|
|
orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
|
|
orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
|
|
|
|
cpu_to_halt_reg r2, r1
|
|
str r0, [r6, r2]
|
|
dsb
|
|
ldr r0, [r6, r2] /* memory barrier */
|
|
|
|
halted:
|
|
isb
|
|
dsb
|
|
wfi /* CPU should be power gated here */
|
|
|
|
/* !!!FIXME!!! Implement halt failure handler */
|
|
b halted
|
|
|
|
/*
|
|
* tegra30_sdram_self_refresh
|
|
*
|
|
* called with MMU off and caches disabled
|
|
* must be executed from IRAM
|
|
* r4 = TEGRA_PMC_BASE
|
|
* r5 = TEGRA_CLK_RESET_BASE
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
* r7 = TEGRA_TMRUS_BASE
|
|
* r10= SoC ID
|
|
*/
|
|
tegra30_sdram_self_refresh:
|
|
|
|
adr r8, tegra_sdram_pad_save
|
|
tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
|
|
cmp r10, #TEGRA30
|
|
adreq r2, tegra30_sdram_pad_address
|
|
ldreq r3, tegra30_sdram_pad_size
|
|
cmp r10, #TEGRA114
|
|
adreq r2, tegra114_sdram_pad_address
|
|
ldreq r3, tegra114_sdram_pad_size
|
|
cmp r10, #TEGRA124
|
|
adreq r2, tegra124_sdram_pad_address
|
|
ldreq r3, tegra30_sdram_pad_size
|
|
|
|
mov r9, #0
|
|
|
|
padsave:
|
|
ldr r0, [r2, r9] @ r0 is the addr in the pad_address
|
|
|
|
ldr r1, [r0]
|
|
str r1, [r8, r9] @ save the content of the addr
|
|
|
|
add r9, r9, #4
|
|
cmp r3, r9
|
|
bne padsave
|
|
padsave_done:
|
|
|
|
dsb
|
|
|
|
cmp r10, #TEGRA30
|
|
ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr
|
|
cmp r10, #TEGRA114
|
|
ldreq r0, =TEGRA_EMC0_BASE
|
|
cmp r10, #TEGRA124
|
|
ldreq r0, =TEGRA124_EMC_BASE
|
|
|
|
enter_self_refresh:
|
|
cmp r10, #TEGRA30
|
|
mov r1, #0
|
|
str r1, [r0, #EMC_ZCAL_INTERVAL]
|
|
str r1, [r0, #EMC_AUTO_CAL_INTERVAL]
|
|
ldr r1, [r0, #EMC_CFG]
|
|
bic r1, r1, #(1 << 28)
|
|
bicne r1, r1, #(1 << 29)
|
|
str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
ldr r1, [r7]
|
|
add r1, r1, #5
|
|
wait_until r1, r7, r2
|
|
|
|
emc_wait_auto_cal:
|
|
ldr r1, [r0, #EMC_AUTO_CAL_STATUS]
|
|
tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared
|
|
bne emc_wait_auto_cal
|
|
|
|
mov r1, #3
|
|
str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests
|
|
|
|
emcidle:
|
|
ldr r1, [r0, #EMC_EMC_STATUS]
|
|
tst r1, #4
|
|
beq emcidle
|
|
|
|
mov r1, #1
|
|
str r1, [r0, #EMC_SELF_REF]
|
|
|
|
emc_device_mask r1, r0
|
|
|
|
emcself:
|
|
ldr r2, [r0, #EMC_EMC_STATUS]
|
|
and r2, r2, r1
|
|
cmp r2, r1
|
|
bne emcself @ loop until DDR in self-refresh
|
|
|
|
/* Put VTTGEN in the lowest power mode */
|
|
ldr r1, [r0, #EMC_XM2VTTGENPADCTRL]
|
|
mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
|
|
and r1, r1, r2
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
|
|
ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2]
|
|
cmp r10, #TEGRA30
|
|
orreq r1, r1, #7 @ set E_NO_VTTGEN
|
|
orrne r1, r1, #0x3f
|
|
str r1, [r0, #EMC_XM2VTTGENPADCTRL2]
|
|
|
|
emc_timing_update r1, r0
|
|
|
|
/* Tegra114 had dual EMC channel, now config the other one */
|
|
cmp r10, #TEGRA114
|
|
bne no_dual_emc_chanl
|
|
mov32 r1, TEGRA_EMC1_BASE
|
|
cmp r0, r1
|
|
movne r0, r1
|
|
bne enter_self_refresh
|
|
no_dual_emc_chanl:
|
|
|
|
ldr r1, [r4, #PMC_CTRL]
|
|
tst r1, #PMC_CTRL_SIDE_EFFECT_LP0
|
|
bne pmc_io_dpd_skip
|
|
/*
|
|
* Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
|
|
* and COMP in the lowest power mode when LP1.
|
|
*/
|
|
mov32 r1, 0x8EC00000
|
|
str r1, [r4, #PMC_IO_DPD_REQ]
|
|
pmc_io_dpd_skip:
|
|
|
|
dsb
|
|
|
|
mov pc, lr
|
|
|
|
.ltorg
|
|
/* dummy symbol for end of IRAM */
|
|
.align L1_CACHE_SHIFT
|
|
.global tegra30_iram_end
|
|
tegra30_iram_end:
|
|
b .
|
|
#endif
|