korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-14 06:24:53 +08:00
Code Issues Packages Projects Releases Wiki Activity
6d37a8d192
linux/drivers/clk/ingenic/jz4770-cgu.c
周琰杰 (Zhou Yanjie) 9d9cc58aff clk: Ingenic: Adjust cgu code to make it compatible with X1830. 
The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, a new
"bypass_reg" was introduced. In addition, when calculating
rate, the PLL of X1830 introduced an extra 2x multiplier,
so a new "rate_multiplier" was introduced. And adjust the
code in jz47xx-cgu.c and x1000-cgu.c, make it to be
compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200528031549.13846-3-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28 16:13:15 -07:00

455 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* JZ4770 SoC CGU driver
* Copyright 2018, Paul Cercueil <paul@crapouillou.net>
*/
#include <linux/bitops.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <dt-bindings/clock/jz4770-cgu.h>
#include "cgu.h"
#include "pm.h"
/*
* CPM registers offset address definition
*/
#define CGU_REG_CPCCR 0x00
#define CGU_REG_LCR 0x04
#define CGU_REG_CPPCR0 0x10
#define CGU_REG_CLKGR0 0x20
#define CGU_REG_OPCR 0x24
#define CGU_REG_CLKGR1 0x28
#define CGU_REG_CPPCR1 0x30
#define CGU_REG_USBPCR1 0x48
#define CGU_REG_USBCDR 0x50
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LPCDR 0x64
#define CGU_REG_MSC0CDR 0x68
#define CGU_REG_UHCCDR 0x6c
#define CGU_REG_SSICDR 0x74
#define CGU_REG_CIMCDR 0x7c
#define CGU_REG_GPSCDR 0x80
#define CGU_REG_PCMCDR 0x84
#define CGU_REG_GPUCDR 0x88
#define CGU_REG_MSC1CDR 0xA4
#define CGU_REG_MSC2CDR 0xA8
#define CGU_REG_BCHCDR 0xAC
/* bits within the OPCR register */
#define OPCR_SPENDH BIT(5) /* UHC PHY suspend */
/* bits within the USBPCR1 register */
#define USBPCR1_UHC_POWER BIT(5) /* UHC PHY power down */
static struct ingenic_cgu *cgu;
static int jz4770_uhc_phy_enable(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
void __iomem *reg_usbpcr1 = cgu->base + CGU_REG_USBPCR1;
writel(readl(reg_opcr) & ~OPCR_SPENDH, reg_opcr);
writel(readl(reg_usbpcr1) | USBPCR1_UHC_POWER, reg_usbpcr1);
return 0;
}
static void jz4770_uhc_phy_disable(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
void __iomem *reg_usbpcr1 = cgu->base + CGU_REG_USBPCR1;
writel(readl(reg_usbpcr1) & ~USBPCR1_UHC_POWER, reg_usbpcr1);
writel(readl(reg_opcr) | OPCR_SPENDH, reg_opcr);
}
static int jz4770_uhc_phy_is_enabled(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
void __iomem *reg_usbpcr1 = cgu->base + CGU_REG_USBPCR1;
return !(readl(reg_opcr) & OPCR_SPENDH) &&
(readl(reg_usbpcr1) & USBPCR1_UHC_POWER);
}
static const struct clk_ops jz4770_uhc_phy_ops = {
.enable = jz4770_uhc_phy_enable,
.disable = jz4770_uhc_phy_disable,
.is_enabled = jz4770_uhc_phy_is_enabled,
};
static const s8 pll_od_encoding[8] = {
0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
};
static const u8 jz4770_cgu_cpccr_div_table[] = {
1, 2, 3, 4, 6, 8, 12,
};
static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
/* External clocks */
[JZ4770_CLK_EXT] = { "ext", CGU_CLK_EXT },
[JZ4770_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
/* PLLs */
[JZ4770_CLK_PLL0] = {
"pll0", CGU_CLK_PLL,
.parents = { JZ4770_CLK_EXT },
.pll = {
.reg = CGU_REG_CPPCR0,
.rate_multiplier = 1,
.m_shift = 24,
.m_bits = 7,
.m_offset = 1,
.n_shift = 18,
.n_bits = 5,
.n_offset = 1,
.od_shift = 16,
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR0,
.bypass_bit = 9,
.enable_bit = 8,
.stable_bit = 10,
},
},
[JZ4770_CLK_PLL1] = {
/* TODO: PLL1 can depend on PLL0 */
"pll1", CGU_CLK_PLL,
.parents = { JZ4770_CLK_EXT },
.pll = {
.reg = CGU_REG_CPPCR1,
.rate_multiplier = 1,
.m_shift = 24,
.m_bits = 7,
.m_offset = 1,
.n_shift = 18,
.n_bits = 5,
.n_offset = 1,
.od_shift = 16,
.od_bits = 2,
.od_max = 8,
.od_encoding = pll_od_encoding,
.bypass_reg = CGU_REG_CPPCR1,
.no_bypass_bit = true,
.enable_bit = 7,
.stable_bit = 6,
},
},
/* Main clocks */
[JZ4770_CLK_CCLK] = {
"cclk", CGU_CLK_DIV,
.parents = { JZ4770_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1,
jz4770_cgu_cpccr_div_table,
},
},
[JZ4770_CLK_H0CLK] = {
"h0clk", CGU_CLK_DIV,
.parents = { JZ4770_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1,
jz4770_cgu_cpccr_div_table,
},
},
[JZ4770_CLK_H1CLK] = {
"h1clk", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4770_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1,
jz4770_cgu_cpccr_div_table,
},
.gate = { CGU_REG_CLKGR1, 7 },
},
[JZ4770_CLK_H2CLK] = {
"h2clk", CGU_CLK_DIV,
.parents = { JZ4770_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1,
jz4770_cgu_cpccr_div_table,
},
},
[JZ4770_CLK_C1CLK] = {
"c1clk", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4770_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1,
jz4770_cgu_cpccr_div_table,
},
.gate = { CGU_REG_OPCR, 31, true }, // disable CCLK stop on idle
},
[JZ4770_CLK_PCLK] = {
"pclk", CGU_CLK_DIV,
.parents = { JZ4770_CLK_PLL0, },
.div = {
CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1,
jz4770_cgu_cpccr_div_table,
},
},
/* Those divided clocks can connect to PLL0 or PLL1 */
[JZ4770_CLK_MMC0_MUX] = {
"mmc0_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_MSC0CDR, 30, 1 },
.div = { CGU_REG_MSC0CDR, 0, 1, 7, -1, -1, 31 },
.gate = { CGU_REG_MSC0CDR, 31 },
},
[JZ4770_CLK_MMC1_MUX] = {
"mmc1_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_MSC1CDR, 30, 1 },
.div = { CGU_REG_MSC1CDR, 0, 1, 7, -1, -1, 31 },
.gate = { CGU_REG_MSC1CDR, 31 },
},
[JZ4770_CLK_MMC2_MUX] = {
"mmc2_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_MSC2CDR, 30, 1 },
.div = { CGU_REG_MSC2CDR, 0, 1, 7, -1, -1, 31 },
.gate = { CGU_REG_MSC2CDR, 31 },
},
[JZ4770_CLK_CIM] = {
"cim", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_CIMCDR, 31, 1 },
.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 26 },
},
[JZ4770_CLK_UHC] = {
"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_UHCCDR, 29, 1 },
.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 24 },
},
[JZ4770_CLK_GPU] = {
"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, -1 },
.mux = { CGU_REG_GPUCDR, 31, 1 },
.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 9 },
},
[JZ4770_CLK_BCH] = {
"bch", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_BCHCDR, 31, 1 },
.div = { CGU_REG_BCHCDR, 0, 1, 3, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 1 },
},
[JZ4770_CLK_LPCLK_MUX] = {
"lpclk", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_LPCDR, 29, 1 },
.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 28 },
},
[JZ4770_CLK_GPS] = {
"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
.mux = { CGU_REG_GPSCDR, 31, 1 },
.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 22 },
},
/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
[JZ4770_CLK_SSI_MUX] = {
"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
.parents = { JZ4770_CLK_EXT, -1,
JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
.mux = { CGU_REG_SSICDR, 30, 2 },
.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1 },
},
[JZ4770_CLK_PCM_MUX] = {
"pcm_mux", CGU_CLK_DIV | CGU_CLK_MUX,
.parents = { JZ4770_CLK_EXT, -1,
JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
.mux = { CGU_REG_PCMCDR, 30, 2 },
.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1 },
},
[JZ4770_CLK_I2S] = {
"i2s", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_EXT, -1,
JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
.mux = { CGU_REG_I2SCDR, 30, 2 },
.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 13 },
},
[JZ4770_CLK_OTG] = {
"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
.parents = { JZ4770_CLK_EXT, -1,
JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
.mux = { CGU_REG_USBCDR, 30, 2 },
.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 2 },
},
/* Gate-only clocks */
[JZ4770_CLK_SSI0] = {
"ssi0", CGU_CLK_GATE,
.parents = { JZ4770_CLK_SSI_MUX, },
.gate = { CGU_REG_CLKGR0, 4 },
},
[JZ4770_CLK_SSI1] = {
"ssi1", CGU_CLK_GATE,
.parents = { JZ4770_CLK_SSI_MUX, },
.gate = { CGU_REG_CLKGR0, 19 },
},
[JZ4770_CLK_SSI2] = {
"ssi2", CGU_CLK_GATE,
.parents = { JZ4770_CLK_SSI_MUX, },
.gate = { CGU_REG_CLKGR0, 20 },
},
[JZ4770_CLK_PCM0] = {
"pcm0", CGU_CLK_GATE,
.parents = { JZ4770_CLK_PCM_MUX, },
.gate = { CGU_REG_CLKGR1, 8 },
},
[JZ4770_CLK_PCM1] = {
"pcm1", CGU_CLK_GATE,
.parents = { JZ4770_CLK_PCM_MUX, },
.gate = { CGU_REG_CLKGR1, 10 },
},
[JZ4770_CLK_DMA] = {
"dma", CGU_CLK_GATE,
.parents = { JZ4770_CLK_H2CLK, },
.gate = { CGU_REG_CLKGR0, 21 },
},
[JZ4770_CLK_I2C0] = {
"i2c0", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 5 },
},
[JZ4770_CLK_I2C1] = {
"i2c1", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 6 },
},
[JZ4770_CLK_I2C2] = {
"i2c2", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR1, 15 },
},
[JZ4770_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 15 },
},
[JZ4770_CLK_UART1] = {
"uart1", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 16 },
},
[JZ4770_CLK_UART2] = {
"uart2", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 17 },
},
[JZ4770_CLK_UART3] = {
"uart3", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 18 },
},
[JZ4770_CLK_IPU] = {
"ipu", CGU_CLK_GATE,
.parents = { JZ4770_CLK_H0CLK, },
.gate = { CGU_REG_CLKGR0, 29 },
},
[JZ4770_CLK_ADC] = {
"adc", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 14 },
},
[JZ4770_CLK_AIC] = {
"aic", CGU_CLK_GATE,
.parents = { JZ4770_CLK_EXT, },
.gate = { CGU_REG_CLKGR0, 8 },
},
[JZ4770_CLK_AUX] = {
"aux", CGU_CLK_GATE,
.parents = { JZ4770_CLK_C1CLK, },
.gate = { CGU_REG_CLKGR1, 14 },
},
[JZ4770_CLK_VPU] = {
"vpu", CGU_CLK_GATE,
.parents = { JZ4770_CLK_H1CLK, },
.gate = { CGU_REG_LCR, 30, false, 150 },
},
[JZ4770_CLK_MMC0] = {
"mmc0", CGU_CLK_GATE,
.parents = { JZ4770_CLK_MMC0_MUX, },
.gate = { CGU_REG_CLKGR0, 3 },
},
[JZ4770_CLK_MMC1] = {
"mmc1", CGU_CLK_GATE,
.parents = { JZ4770_CLK_MMC1_MUX, },
.gate = { CGU_REG_CLKGR0, 11 },
},
[JZ4770_CLK_MMC2] = {
"mmc2", CGU_CLK_GATE,
.parents = { JZ4770_CLK_MMC2_MUX, },
.gate = { CGU_REG_CLKGR0, 12 },
},
[JZ4770_CLK_OTG_PHY] = {
"usb_phy", CGU_CLK_GATE,
.parents = { JZ4770_CLK_OTG },
.gate = { CGU_REG_OPCR, 7, true, 50 },
},
/* Custom clocks */
[JZ4770_CLK_UHC_PHY] = {
"uhc_phy", CGU_CLK_CUSTOM,
.parents = { JZ4770_CLK_UHC, -1, -1, -1 },
.custom = { &jz4770_uhc_phy_ops },
},
[JZ4770_CLK_EXT512] = {
"ext/512", CGU_CLK_FIXDIV,
.parents = { JZ4770_CLK_EXT },
.fixdiv = { 512 },
},
[JZ4770_CLK_RTC] = {
"rtc", CGU_CLK_MUX,
.parents = { JZ4770_CLK_EXT512, JZ4770_CLK_OSC32K, },
.mux = { CGU_REG_OPCR, 2, 1},
},
};
static void __init jz4770_cgu_init(struct device_node *np)
{
int retval;
cgu = ingenic_cgu_new(jz4770_cgu_clocks,
ARRAY_SIZE(jz4770_cgu_clocks), np);
if (!cgu) {
pr_err("%s: failed to initialise CGU\n", __func__);
return;
}
retval = ingenic_cgu_register_clocks(cgu);
if (retval)
pr_err("%s: failed to register CGU Clocks\n", __func__);
ingenic_cgu_register_syscore_ops(cgu);
}
/* We only probe via devicetree, no need for a platform driver */
CLK_OF_DECLARE_DRIVER(jz4770_cgu, "ingenic,jz4770-cgu", jz4770_cgu_init);
Reference in New Issue View Git Blame Copy Permalink