mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
82ebbe65d7
fix use after free by storing the result of PTR_ERR(n->pdev) to a local variable before returning. Signed-off-by: Manank Patel <pmanank200502@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221013095258.1424967-1-pmanank200502@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
430 lines
9.6 KiB
C
430 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* exar_wdt.c - Driver for the watchdog present in some
|
|
* Exar/MaxLinear UART chips like the XR28V38x.
|
|
*
|
|
* (c) Copyright 2022 D. Müller <d.mueller@elsoft.ch>.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define DRV_NAME "exar_wdt"
|
|
|
|
static const unsigned short sio_config_ports[] = { 0x2e, 0x4e };
|
|
static const unsigned char sio_enter_keys[] = { 0x67, 0x77, 0x87, 0xA0 };
|
|
#define EXAR_EXIT_KEY 0xAA
|
|
|
|
#define EXAR_LDN 0x07
|
|
#define EXAR_DID 0x20
|
|
#define EXAR_VID 0x23
|
|
#define EXAR_WDT 0x26
|
|
#define EXAR_ACT 0x30
|
|
#define EXAR_RTBASE 0x60
|
|
|
|
#define EXAR_WDT_LDEV 0x08
|
|
|
|
#define EXAR_VEN_ID 0x13A8
|
|
#define EXAR_DEV_382 0x0382
|
|
#define EXAR_DEV_384 0x0384
|
|
|
|
/* WDT runtime registers */
|
|
#define WDT_CTRL 0x00
|
|
#define WDT_VAL 0x01
|
|
|
|
#define WDT_UNITS_10MS 0x0 /* the 10 millisec unit of the HW is not used */
|
|
#define WDT_UNITS_SEC 0x2
|
|
#define WDT_UNITS_MIN 0x4
|
|
|
|
/* default WDT control for WDTOUT signal activ / rearm by read */
|
|
#define EXAR_WDT_DEF_CONF 0
|
|
|
|
struct wdt_pdev_node {
|
|
struct list_head list;
|
|
struct platform_device *pdev;
|
|
const char name[16];
|
|
};
|
|
|
|
struct wdt_priv {
|
|
/* the lock for WDT io operations */
|
|
spinlock_t io_lock;
|
|
struct resource wdt_res;
|
|
struct watchdog_device wdt_dev;
|
|
unsigned short did;
|
|
unsigned short config_port;
|
|
unsigned char enter_key;
|
|
unsigned char unit;
|
|
unsigned char timeout;
|
|
};
|
|
|
|
#define WATCHDOG_TIMEOUT 60
|
|
|
|
static int timeout = WATCHDOG_TIMEOUT;
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Watchdog timeout in seconds. 1<=timeout<=15300, default="
|
|
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
static int exar_sio_enter(const unsigned short config_port,
|
|
const unsigned char key)
|
|
{
|
|
if (!request_muxed_region(config_port, 2, DRV_NAME))
|
|
return -EBUSY;
|
|
|
|
/* write the ENTER-KEY twice */
|
|
outb(key, config_port);
|
|
outb(key, config_port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exar_sio_exit(const unsigned short config_port)
|
|
{
|
|
outb(EXAR_EXIT_KEY, config_port);
|
|
release_region(config_port, 2);
|
|
}
|
|
|
|
static unsigned char exar_sio_read(const unsigned short config_port,
|
|
const unsigned char reg)
|
|
{
|
|
outb(reg, config_port);
|
|
return inb(config_port + 1);
|
|
}
|
|
|
|
static void exar_sio_write(const unsigned short config_port,
|
|
const unsigned char reg, const unsigned char val)
|
|
{
|
|
outb(reg, config_port);
|
|
outb(val, config_port + 1);
|
|
}
|
|
|
|
static unsigned short exar_sio_read16(const unsigned short config_port,
|
|
const unsigned char reg)
|
|
{
|
|
unsigned char msb, lsb;
|
|
|
|
msb = exar_sio_read(config_port, reg);
|
|
lsb = exar_sio_read(config_port, reg + 1);
|
|
|
|
return (msb << 8) | lsb;
|
|
}
|
|
|
|
static void exar_sio_select_wdt(const unsigned short config_port)
|
|
{
|
|
exar_sio_write(config_port, EXAR_LDN, EXAR_WDT_LDEV);
|
|
}
|
|
|
|
static void exar_wdt_arm(const struct wdt_priv *priv)
|
|
{
|
|
unsigned short rt_base = priv->wdt_res.start;
|
|
|
|
/* write timeout value twice to arm watchdog */
|
|
outb(priv->timeout, rt_base + WDT_VAL);
|
|
outb(priv->timeout, rt_base + WDT_VAL);
|
|
}
|
|
|
|
static void exar_wdt_disarm(const struct wdt_priv *priv)
|
|
{
|
|
unsigned short rt_base = priv->wdt_res.start;
|
|
|
|
/*
|
|
* use two accesses with different values to make sure
|
|
* that a combination of a previous single access and
|
|
* the ones below with the same value are not falsely
|
|
* interpreted as "arm watchdog"
|
|
*/
|
|
outb(0xFF, rt_base + WDT_VAL);
|
|
outb(0, rt_base + WDT_VAL);
|
|
}
|
|
|
|
static int exar_wdt_start(struct watchdog_device *wdog)
|
|
{
|
|
struct wdt_priv *priv = watchdog_get_drvdata(wdog);
|
|
unsigned short rt_base = priv->wdt_res.start;
|
|
|
|
spin_lock(&priv->io_lock);
|
|
|
|
exar_wdt_disarm(priv);
|
|
outb(priv->unit, rt_base + WDT_CTRL);
|
|
exar_wdt_arm(priv);
|
|
|
|
spin_unlock(&priv->io_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int exar_wdt_stop(struct watchdog_device *wdog)
|
|
{
|
|
struct wdt_priv *priv = watchdog_get_drvdata(wdog);
|
|
|
|
spin_lock(&priv->io_lock);
|
|
|
|
exar_wdt_disarm(priv);
|
|
|
|
spin_unlock(&priv->io_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int exar_wdt_keepalive(struct watchdog_device *wdog)
|
|
{
|
|
struct wdt_priv *priv = watchdog_get_drvdata(wdog);
|
|
unsigned short rt_base = priv->wdt_res.start;
|
|
|
|
spin_lock(&priv->io_lock);
|
|
|
|
/* reading the WDT_VAL reg will feed the watchdog */
|
|
inb(rt_base + WDT_VAL);
|
|
|
|
spin_unlock(&priv->io_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int exar_wdt_set_timeout(struct watchdog_device *wdog, unsigned int t)
|
|
{
|
|
struct wdt_priv *priv = watchdog_get_drvdata(wdog);
|
|
bool unit_min = false;
|
|
|
|
/*
|
|
* if new timeout is bigger then 255 seconds, change the
|
|
* unit to minutes and round the timeout up to the next whole minute
|
|
*/
|
|
if (t > 255) {
|
|
unit_min = true;
|
|
t = DIV_ROUND_UP(t, 60);
|
|
}
|
|
|
|
/* save for later use in exar_wdt_start() */
|
|
priv->unit = unit_min ? WDT_UNITS_MIN : WDT_UNITS_SEC;
|
|
priv->timeout = t;
|
|
|
|
wdog->timeout = unit_min ? t * 60 : t;
|
|
|
|
if (watchdog_hw_running(wdog))
|
|
exar_wdt_start(wdog);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info exar_wdt_info = {
|
|
.options = WDIOF_KEEPALIVEPING |
|
|
WDIOF_SETTIMEOUT |
|
|
WDIOF_MAGICCLOSE,
|
|
.identity = "Exar/MaxLinear XR28V38x Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops exar_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = exar_wdt_start,
|
|
.stop = exar_wdt_stop,
|
|
.ping = exar_wdt_keepalive,
|
|
.set_timeout = exar_wdt_set_timeout,
|
|
};
|
|
|
|
static int exar_wdt_config(struct watchdog_device *wdog,
|
|
const unsigned char conf)
|
|
{
|
|
struct wdt_priv *priv = watchdog_get_drvdata(wdog);
|
|
int ret;
|
|
|
|
ret = exar_sio_enter(priv->config_port, priv->enter_key);
|
|
if (ret)
|
|
return ret;
|
|
|
|
exar_sio_select_wdt(priv->config_port);
|
|
exar_sio_write(priv->config_port, EXAR_WDT, conf);
|
|
|
|
exar_sio_exit(priv->config_port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init exar_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct wdt_priv *priv = dev->platform_data;
|
|
struct watchdog_device *wdt_dev = &priv->wdt_dev;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!res)
|
|
return -ENXIO;
|
|
|
|
spin_lock_init(&priv->io_lock);
|
|
|
|
wdt_dev->info = &exar_wdt_info;
|
|
wdt_dev->ops = &exar_wdt_ops;
|
|
wdt_dev->min_timeout = 1;
|
|
wdt_dev->max_timeout = 255 * 60;
|
|
|
|
watchdog_init_timeout(wdt_dev, timeout, NULL);
|
|
watchdog_set_nowayout(wdt_dev, nowayout);
|
|
watchdog_stop_on_reboot(wdt_dev);
|
|
watchdog_stop_on_unregister(wdt_dev);
|
|
watchdog_set_drvdata(wdt_dev, priv);
|
|
|
|
ret = exar_wdt_config(wdt_dev, EXAR_WDT_DEF_CONF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
exar_wdt_set_timeout(wdt_dev, timeout);
|
|
/* Make sure that the watchdog is not running */
|
|
exar_wdt_stop(wdt_dev);
|
|
|
|
ret = devm_watchdog_register_device(dev, wdt_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(dev, "XR28V%X WDT initialized. timeout=%d sec (nowayout=%d)\n",
|
|
priv->did, timeout, nowayout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned short __init exar_detect(const unsigned short config_port,
|
|
const unsigned char key,
|
|
unsigned short *rt_base)
|
|
{
|
|
int ret;
|
|
unsigned short base = 0;
|
|
unsigned short vid, did;
|
|
|
|
ret = exar_sio_enter(config_port, key);
|
|
if (ret)
|
|
return 0;
|
|
|
|
vid = exar_sio_read16(config_port, EXAR_VID);
|
|
did = exar_sio_read16(config_port, EXAR_DID);
|
|
|
|
/* check for the vendor and device IDs we currently know about */
|
|
if (vid == EXAR_VEN_ID &&
|
|
(did == EXAR_DEV_382 ||
|
|
did == EXAR_DEV_384)) {
|
|
exar_sio_select_wdt(config_port);
|
|
/* is device active? */
|
|
if (exar_sio_read(config_port, EXAR_ACT) == 0x01)
|
|
base = exar_sio_read16(config_port, EXAR_RTBASE);
|
|
}
|
|
|
|
exar_sio_exit(config_port);
|
|
|
|
if (base) {
|
|
pr_debug("Found a XR28V%X WDT (conf: 0x%x / rt: 0x%04x)\n",
|
|
did, config_port, base);
|
|
*rt_base = base;
|
|
return did;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver exar_wdt_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
},
|
|
};
|
|
|
|
static LIST_HEAD(pdev_list);
|
|
|
|
static int __init exar_wdt_register(struct wdt_priv *priv, const int idx)
|
|
{
|
|
struct wdt_pdev_node *n;
|
|
|
|
n = kzalloc(sizeof(*n), GFP_KERNEL);
|
|
if (!n)
|
|
return -ENOMEM;
|
|
|
|
INIT_LIST_HEAD(&n->list);
|
|
|
|
scnprintf((char *)n->name, sizeof(n->name), DRV_NAME ".%d", idx);
|
|
priv->wdt_res.name = n->name;
|
|
|
|
n->pdev = platform_device_register_resndata(NULL, DRV_NAME, idx,
|
|
&priv->wdt_res, 1,
|
|
priv, sizeof(*priv));
|
|
if (IS_ERR(n->pdev)) {
|
|
int err = PTR_ERR(n->pdev);
|
|
|
|
kfree(n);
|
|
return err;
|
|
}
|
|
|
|
list_add_tail(&n->list, &pdev_list);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exar_wdt_unregister(void)
|
|
{
|
|
struct wdt_pdev_node *n, *t;
|
|
|
|
list_for_each_entry_safe(n, t, &pdev_list, list) {
|
|
platform_device_unregister(n->pdev);
|
|
list_del(&n->list);
|
|
kfree(n);
|
|
}
|
|
}
|
|
|
|
static int __init exar_wdt_init(void)
|
|
{
|
|
int ret, i, j, idx = 0;
|
|
|
|
/* search for active Exar watchdogs on all possible locations */
|
|
for (i = 0; i < ARRAY_SIZE(sio_config_ports); i++) {
|
|
for (j = 0; j < ARRAY_SIZE(sio_enter_keys); j++) {
|
|
unsigned short did, rt_base = 0;
|
|
|
|
did = exar_detect(sio_config_ports[i],
|
|
sio_enter_keys[j],
|
|
&rt_base);
|
|
|
|
if (did) {
|
|
struct wdt_priv priv = {
|
|
.wdt_res = DEFINE_RES_IO(rt_base, 2),
|
|
.did = did,
|
|
.config_port = sio_config_ports[i],
|
|
.enter_key = sio_enter_keys[j],
|
|
};
|
|
|
|
ret = exar_wdt_register(&priv, idx);
|
|
if (!ret)
|
|
idx++;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!idx)
|
|
return -ENODEV;
|
|
|
|
ret = platform_driver_probe(&exar_wdt_driver, exar_wdt_probe);
|
|
if (ret)
|
|
exar_wdt_unregister();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit exar_wdt_exit(void)
|
|
{
|
|
exar_wdt_unregister();
|
|
platform_driver_unregister(&exar_wdt_driver);
|
|
}
|
|
|
|
module_init(exar_wdt_init);
|
|
module_exit(exar_wdt_exit);
|
|
|
|
MODULE_AUTHOR("David Müller <d.mueller@elsoft.ch>");
|
|
MODULE_DESCRIPTION("Exar/MaxLinear Watchdog Driver");
|
|
MODULE_LICENSE("GPL");
|