mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
47fa116e5f
For TMU v2, TMSAR registers need to be set properly to get the accurate temperature values. Also the temperature read needs to be converted to degree Celsius since it is in degrees Kelvin. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200526060212.4118-1-andy.tang@nxp.com
389 lines
9.5 KiB
C
389 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright 2016 Freescale Semiconductor, Inc.
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/thermal.h>
|
|
#include <linux/units.h>
|
|
|
|
#include "thermal_core.h"
|
|
#include "thermal_hwmon.h"
|
|
|
|
#define SITES_MAX 16
|
|
#define TMR_DISABLE 0x0
|
|
#define TMR_ME 0x80000000
|
|
#define TMR_ALPF 0x0c000000
|
|
#define TMR_ALPF_V2 0x03000000
|
|
#define TMTMIR_DEFAULT 0x0000000f
|
|
#define TIER_DISABLE 0x0
|
|
#define TEUMR0_V2 0x51009c00
|
|
#define TMSARA_V2 0xe
|
|
#define TMU_VER1 0x1
|
|
#define TMU_VER2 0x2
|
|
|
|
#define REGS_TMR 0x000 /* Mode Register */
|
|
#define TMR_DISABLE 0x0
|
|
#define TMR_ME 0x80000000
|
|
#define TMR_ALPF 0x0c000000
|
|
#define TMR_MSITE_ALL GENMASK(15, 0)
|
|
|
|
#define REGS_TMTMIR 0x008 /* Temperature measurement interval Register */
|
|
#define TMTMIR_DEFAULT 0x0000000f
|
|
|
|
#define REGS_V2_TMSR 0x008 /* monitor site register */
|
|
|
|
#define REGS_V2_TMTMIR 0x00c /* Temperature measurement interval Register */
|
|
|
|
#define REGS_TIER 0x020 /* Interrupt Enable Register */
|
|
#define TIER_DISABLE 0x0
|
|
|
|
|
|
#define REGS_TTCFGR 0x080 /* Temperature Configuration Register */
|
|
#define REGS_TSCFGR 0x084 /* Sensor Configuration Register */
|
|
|
|
#define REGS_TRITSR(n) (0x100 + 16 * (n)) /* Immediate Temperature
|
|
* Site Register
|
|
*/
|
|
#define TRITSR_V BIT(31)
|
|
#define REGS_V2_TMSAR(n) (0x304 + 16 * (n)) /* TMU monitoring
|
|
* site adjustment register
|
|
*/
|
|
#define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n
|
|
* Control Register
|
|
*/
|
|
#define REGS_IPBRR(n) (0xbf8 + 4 * (n)) /* IP Block Revision
|
|
* Register n
|
|
*/
|
|
#define REGS_V2_TEUMR(n) (0xf00 + 4 * (n))
|
|
|
|
/*
|
|
* Thermal zone data
|
|
*/
|
|
struct qoriq_sensor {
|
|
int id;
|
|
};
|
|
|
|
struct qoriq_tmu_data {
|
|
int ver;
|
|
struct regmap *regmap;
|
|
struct clk *clk;
|
|
struct qoriq_sensor sensor[SITES_MAX];
|
|
};
|
|
|
|
static struct qoriq_tmu_data *qoriq_sensor_to_data(struct qoriq_sensor *s)
|
|
{
|
|
return container_of(s, struct qoriq_tmu_data, sensor[s->id]);
|
|
}
|
|
|
|
static int tmu_get_temp(void *p, int *temp)
|
|
{
|
|
struct qoriq_sensor *qsensor = p;
|
|
struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
|
|
u32 val;
|
|
/*
|
|
* REGS_TRITSR(id) has the following layout:
|
|
*
|
|
* For TMU Rev1:
|
|
* 31 ... 7 6 5 4 3 2 1 0
|
|
* V TEMP
|
|
*
|
|
* Where V bit signifies if the measurement is ready and is
|
|
* within sensor range. TEMP is an 8 bit value representing
|
|
* temperature in Celsius.
|
|
|
|
* For TMU Rev2:
|
|
* 31 ... 8 7 6 5 4 3 2 1 0
|
|
* V TEMP
|
|
*
|
|
* Where V bit signifies if the measurement is ready and is
|
|
* within sensor range. TEMP is an 9 bit value representing
|
|
* temperature in KelVin.
|
|
*/
|
|
if (regmap_read_poll_timeout(qdata->regmap,
|
|
REGS_TRITSR(qsensor->id),
|
|
val,
|
|
val & TRITSR_V,
|
|
USEC_PER_MSEC,
|
|
10 * USEC_PER_MSEC))
|
|
return -ENODATA;
|
|
|
|
if (qdata->ver == TMU_VER1)
|
|
*temp = (val & GENMASK(7, 0)) * MILLIDEGREE_PER_DEGREE;
|
|
else
|
|
*temp = kelvin_to_millicelsius(val & GENMASK(8, 0));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops tmu_tz_ops = {
|
|
.get_temp = tmu_get_temp,
|
|
};
|
|
|
|
static int qoriq_tmu_register_tmu_zone(struct device *dev,
|
|
struct qoriq_tmu_data *qdata)
|
|
{
|
|
int id;
|
|
|
|
if (qdata->ver == TMU_VER1) {
|
|
regmap_write(qdata->regmap, REGS_TMR,
|
|
TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
|
|
} else {
|
|
regmap_write(qdata->regmap, REGS_V2_TMSR, TMR_MSITE_ALL);
|
|
regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF_V2);
|
|
}
|
|
|
|
for (id = 0; id < SITES_MAX; id++) {
|
|
struct thermal_zone_device *tzd;
|
|
struct qoriq_sensor *sensor = &qdata->sensor[id];
|
|
int ret;
|
|
|
|
sensor->id = id;
|
|
|
|
tzd = devm_thermal_zone_of_sensor_register(dev, id,
|
|
sensor,
|
|
&tmu_tz_ops);
|
|
ret = PTR_ERR_OR_ZERO(tzd);
|
|
if (ret) {
|
|
if (ret == -ENODEV)
|
|
continue;
|
|
|
|
regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
|
|
return ret;
|
|
}
|
|
|
|
if (devm_thermal_add_hwmon_sysfs(tzd))
|
|
dev_warn(dev,
|
|
"Failed to add hwmon sysfs attributes\n");
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qoriq_tmu_calibration(struct device *dev,
|
|
struct qoriq_tmu_data *data)
|
|
{
|
|
int i, val, len;
|
|
u32 range[4];
|
|
const u32 *calibration;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
len = of_property_count_u32_elems(np, "fsl,tmu-range");
|
|
if (len < 0 || len > 4) {
|
|
dev_err(dev, "invalid range data.\n");
|
|
return len;
|
|
}
|
|
|
|
val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
|
|
if (val != 0) {
|
|
dev_err(dev, "failed to read range data.\n");
|
|
return val;
|
|
}
|
|
|
|
/* Init temperature range registers */
|
|
for (i = 0; i < len; i++)
|
|
regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
|
|
|
|
calibration = of_get_property(np, "fsl,tmu-calibration", &len);
|
|
if (calibration == NULL || len % 8) {
|
|
dev_err(dev, "invalid calibration data.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < len; i += 8, calibration += 2) {
|
|
val = of_read_number(calibration, 1);
|
|
regmap_write(data->regmap, REGS_TTCFGR, val);
|
|
val = of_read_number(calibration + 1, 1);
|
|
regmap_write(data->regmap, REGS_TSCFGR, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
|
|
{
|
|
int i;
|
|
|
|
/* Disable interrupt, using polling instead */
|
|
regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
|
|
|
|
/* Set update_interval */
|
|
|
|
if (data->ver == TMU_VER1) {
|
|
regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
|
|
} else {
|
|
regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
|
|
regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
|
|
for (i = 0; i < SITES_MAX; i++)
|
|
regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2);
|
|
}
|
|
|
|
/* Disable monitoring */
|
|
regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
|
|
}
|
|
|
|
static const struct regmap_range qoriq_yes_ranges[] = {
|
|
regmap_reg_range(REGS_TMR, REGS_TSCFGR),
|
|
regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
|
|
regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
|
|
regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)),
|
|
regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
|
|
/* Read only registers below */
|
|
regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
|
|
};
|
|
|
|
static const struct regmap_access_table qoriq_wr_table = {
|
|
.yes_ranges = qoriq_yes_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(qoriq_yes_ranges) - 1,
|
|
};
|
|
|
|
static const struct regmap_access_table qoriq_rd_table = {
|
|
.yes_ranges = qoriq_yes_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(qoriq_yes_ranges),
|
|
};
|
|
|
|
static void qoriq_tmu_action(void *p)
|
|
{
|
|
struct qoriq_tmu_data *data = p;
|
|
|
|
regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
|
|
clk_disable_unprepare(data->clk);
|
|
}
|
|
|
|
static int qoriq_tmu_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
u32 ver;
|
|
struct qoriq_tmu_data *data;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
const bool little_endian = of_property_read_bool(np, "little-endian");
|
|
const enum regmap_endian format_endian =
|
|
little_endian ? REGMAP_ENDIAN_LITTLE : REGMAP_ENDIAN_BIG;
|
|
const struct regmap_config regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.rd_table = &qoriq_rd_table,
|
|
.wr_table = &qoriq_wr_table,
|
|
.val_format_endian = format_endian,
|
|
.max_register = SZ_4K,
|
|
};
|
|
void __iomem *base;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
ret = PTR_ERR_OR_ZERO(base);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get memory region\n");
|
|
return ret;
|
|
}
|
|
|
|
data->regmap = devm_regmap_init_mmio(dev, base, ®map_config);
|
|
ret = PTR_ERR_OR_ZERO(data->regmap);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to init regmap (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data->clk = devm_clk_get_optional(dev, NULL);
|
|
if (IS_ERR(data->clk))
|
|
return PTR_ERR(data->clk);
|
|
|
|
ret = clk_prepare_enable(data->clk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(dev, qoriq_tmu_action, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* version register offset at: 0xbf8 on both v1 and v2 */
|
|
ret = regmap_read(data->regmap, REGS_IPBRR(0), &ver);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to read IP block version\n");
|
|
return ret;
|
|
}
|
|
data->ver = (ver >> 8) & 0xff;
|
|
|
|
qoriq_tmu_init_device(data); /* TMU initialization */
|
|
|
|
ret = qoriq_tmu_calibration(dev, data); /* TMU calibration */
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = qoriq_tmu_register_tmu_zone(dev, data);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to register sensors\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
|
|
{
|
|
struct qoriq_tmu_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(data->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused qoriq_tmu_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct qoriq_tmu_data *data = dev_get_drvdata(dev);
|
|
|
|
ret = clk_prepare_enable(data->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable monitoring */
|
|
return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
|
|
qoriq_tmu_suspend, qoriq_tmu_resume);
|
|
|
|
static const struct of_device_id qoriq_tmu_match[] = {
|
|
{ .compatible = "fsl,qoriq-tmu", },
|
|
{ .compatible = "fsl,imx8mq-tmu", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qoriq_tmu_match);
|
|
|
|
static struct platform_driver qoriq_tmu = {
|
|
.driver = {
|
|
.name = "qoriq_thermal",
|
|
.pm = &qoriq_tmu_pm_ops,
|
|
.of_match_table = qoriq_tmu_match,
|
|
},
|
|
.probe = qoriq_tmu_probe,
|
|
};
|
|
module_platform_driver(qoriq_tmu);
|
|
|
|
MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>");
|
|
MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver");
|
|
MODULE_LICENSE("GPL v2");
|