linux/drivers/spi/spi-intel.c
Linus Torvalds d0f3ad23cf spi: Updates for v6.2
A busy enough release, but not for the core which has only seen very
 small updates.  The biggest addition is the readdition of support for
 detailed configuration of the timings around chip selects.  That had
 been removed for lack of use but there's been applications found for it
 on Atmel systems.  Otherwise the updates are mostly feature additions
 and cleanups to existing drivers.
 
  - Provide a helper for getting device match data in a way that
    abstracts away which firmware interface is being used.
  - Re-add the spi_set_cs_timing() API for detailed configuration of the
    timing around chip select and support it on Atmel.
  - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450 FIU
    and Socionext F_OSPI.
 
 There's a straightforward add/add conflict with the rpmsg tree in the
 xilinx firmware code (both trees got new users of the firmware added
 each needing new firmware<->kernel ioctls).
 
 There's a cross tree merge with I2C in order to use the new
 i2c_client_get_device_id() helper in some I2C attached SPI controllers
 as part of their conversion to I2C's probe_new() API.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOXIt8ACgkQJNaLcl1U
 h9Alrwf9F6mgj3eaDbhPH2lJ+zZRDJrdrMxT1US1tWixCMEZilntDXVecJA+/htp
 /tJ0InGXsyr+6p9lXsFGQZGuaSIzKh0h2OW3JCakPGfp6HvA8+qXqHYSLKzIXtYU
 /lk+kR+H6TGG+pjFtwkNnbCY/pYAlOtdjdmfui68VSsqWYX1W1kJDhDEkpUZePUx
 Bc9wGgGByL0ZEHMQ/O6d8Nc/JzfTQPFuPB9ZHpIHFuPuAnjDQx+veaWejpVawy+D
 8crMM7OgGpHy1hENSN786039QvNbWvVucPyVwJfU4SDhrT6oNNmEA/RF/DqTt472
 8cbNG5H5bSR0Youv9ofxdP9bAOHhtg==
 =eJDv
 -----END PGP SIGNATURE-----

Merge tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A busy enough release, but not for the core which has only seen very
  small updates. The biggest addition is the readdition of support for
  detailed configuration of the timings around chip selects. That had
  been removed for lack of use but there's been applications found for
  it on Atmel systems. Otherwise the updates are mostly feature
  additions and cleanups to existing drivers.

  Summary:

   - Provide a helper for getting device match data in a way that
     abstracts away which firmware interface is being used.

   - Re-add the spi_set_cs_timing() API for detailed configuration of
     the timing around chip select and support it on Atmel.

   - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450
     FIU and Socionext F_OSPI"

* tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: dt-bindings: Convert Synquacer SPI to DT schema
  spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
  spi: spi-mtk-nor: Add recovery mechanism for dma read timeout
  spi: spi-fsl-lpspi: add num-cs binding for lpspi
  spi: spi-fsl-lpspi: support multiple cs for lpspi
  spi: mtk-snfi: Add snfi support for MT7986 IC
  spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
  spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation
  spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver
  spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property)
  spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include)
  spi: mediatek: Enable irq when pdata is ready
  spi: spi-mtk-nor: Unify write buffer on/off
  spi: intel: Add support for SFDP opcode
  spi: intel: Take possible chip address into account in intel_spi_read/write_reg()
  spi: intel: Implement adjust_op_size()
  spi: intel: Use ->replacement_op in intel_spi_hw_cycle()
  spi: cadence: Drop obsolete dependency on COMPILE_TEST
  spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings
  spi: wpcm-fiu: Add direct map support
  ...
2022-12-13 12:54:31 -08:00

1434 lines
38 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Intel PCH/PCU SPI flash driver.
*
* Copyright (C) 2016 - 2022, Intel Corporation
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/spi-nor.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
#include "spi-intel.h"
/* Offsets are from @ispi->base */
#define BFPREG 0x00
#define HSFSTS_CTL 0x04
#define HSFSTS_CTL_FSMIE BIT(31)
#define HSFSTS_CTL_FDBC_SHIFT 24
#define HSFSTS_CTL_FDBC_MASK (0x3f << HSFSTS_CTL_FDBC_SHIFT)
#define HSFSTS_CTL_FCYCLE_SHIFT 17
#define HSFSTS_CTL_FCYCLE_MASK (0x0f << HSFSTS_CTL_FCYCLE_SHIFT)
/* HW sequencer opcodes */
#define HSFSTS_CTL_FCYCLE_READ (0x00 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_RDSFDP (0x05 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT)
#define HSFSTS_CTL_FGO BIT(16)
#define HSFSTS_CTL_FLOCKDN BIT(15)
#define HSFSTS_CTL_FDV BIT(14)
#define HSFSTS_CTL_SCIP BIT(5)
#define HSFSTS_CTL_AEL BIT(2)
#define HSFSTS_CTL_FCERR BIT(1)
#define HSFSTS_CTL_FDONE BIT(0)
#define FADDR 0x08
#define DLOCK 0x0c
#define FDATA(n) (0x10 + ((n) * 4))
#define FRACC 0x50
#define FREG(n) (0x54 + ((n) * 4))
#define FREG_BASE_MASK GENMASK(14, 0)
#define FREG_LIMIT_SHIFT 16
#define FREG_LIMIT_MASK GENMASK(30, 16)
/* Offset is from @ispi->pregs */
#define PR(n) ((n) * 4)
#define PR_WPE BIT(31)
#define PR_LIMIT_SHIFT 16
#define PR_LIMIT_MASK GENMASK(30, 16)
#define PR_RPE BIT(15)
#define PR_BASE_MASK GENMASK(14, 0)
/* Offsets are from @ispi->sregs */
#define SSFSTS_CTL 0x00
#define SSFSTS_CTL_FSMIE BIT(23)
#define SSFSTS_CTL_DS BIT(22)
#define SSFSTS_CTL_DBC_SHIFT 16
#define SSFSTS_CTL_SPOP BIT(11)
#define SSFSTS_CTL_ACS BIT(10)
#define SSFSTS_CTL_SCGO BIT(9)
#define SSFSTS_CTL_COP_SHIFT 12
#define SSFSTS_CTL_FRS BIT(7)
#define SSFSTS_CTL_DOFRS BIT(6)
#define SSFSTS_CTL_AEL BIT(4)
#define SSFSTS_CTL_FCERR BIT(3)
#define SSFSTS_CTL_FDONE BIT(2)
#define SSFSTS_CTL_SCIP BIT(0)
#define PREOP_OPTYPE 0x04
#define OPMENU0 0x08
#define OPMENU1 0x0c
#define OPTYPE_READ_NO_ADDR 0
#define OPTYPE_WRITE_NO_ADDR 1
#define OPTYPE_READ_WITH_ADDR 2
#define OPTYPE_WRITE_WITH_ADDR 3
/* CPU specifics */
#define BYT_PR 0x74
#define BYT_SSFSTS_CTL 0x90
#define BYT_FREG_NUM 5
#define BYT_PR_NUM 5
#define LPT_PR 0x74
#define LPT_SSFSTS_CTL 0x90
#define LPT_FREG_NUM 5
#define LPT_PR_NUM 5
#define BXT_PR 0x84
#define BXT_SSFSTS_CTL 0xa0
#define BXT_FREG_NUM 12
#define BXT_PR_NUM 6
#define CNL_PR 0x84
#define CNL_FREG_NUM 6
#define CNL_PR_NUM 5
#define LVSCC 0xc4
#define UVSCC 0xc8
#define ERASE_OPCODE_SHIFT 8
#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
#define ERASE_64K_OPCODE_SHIFT 16
#define ERASE_64K_OPCODE_MASK (0xff << ERASE_64K_OPCODE_SHIFT)
/* Flash descriptor fields */
#define FLVALSIG_MAGIC 0x0ff0a55a
#define FLMAP0_NC_MASK GENMASK(9, 8)
#define FLMAP0_NC_SHIFT 8
#define FLMAP0_FCBA_MASK GENMASK(7, 0)
#define FLCOMP_C0DEN_MASK GENMASK(3, 0)
#define FLCOMP_C0DEN_512K 0x00
#define FLCOMP_C0DEN_1M 0x01
#define FLCOMP_C0DEN_2M 0x02
#define FLCOMP_C0DEN_4M 0x03
#define FLCOMP_C0DEN_8M 0x04
#define FLCOMP_C0DEN_16M 0x05
#define FLCOMP_C0DEN_32M 0x06
#define FLCOMP_C0DEN_64M 0x07
#define INTEL_SPI_TIMEOUT 5000 /* ms */
#define INTEL_SPI_FIFO_SZ 64
/**
* struct intel_spi - Driver private data
* @dev: Device pointer
* @info: Pointer to board specific info
* @base: Beginning of MMIO space
* @pregs: Start of protection registers
* @sregs: Start of software sequencer registers
* @master: Pointer to the SPI controller structure
* @nregions: Maximum number of regions
* @pr_num: Maximum number of protected range registers
* @chip0_size: Size of the first flash chip in bytes
* @locked: Is SPI setting locked
* @swseq_reg: Use SW sequencer in register reads/writes
* @swseq_erase: Use SW sequencer in erase operation
* @atomic_preopcode: Holds preopcode when atomic sequence is requested
* @opcodes: Opcodes which are supported. This are programmed by BIOS
* before it locks down the controller.
* @mem_ops: Pointer to SPI MEM ops supported by the controller
*/
struct intel_spi {
struct device *dev;
const struct intel_spi_boardinfo *info;
void __iomem *base;
void __iomem *pregs;
void __iomem *sregs;
struct spi_controller *master;
size_t nregions;
size_t pr_num;
size_t chip0_size;
bool locked;
bool swseq_reg;
bool swseq_erase;
u8 atomic_preopcode;
u8 opcodes[8];
const struct intel_spi_mem_op *mem_ops;
};
struct intel_spi_mem_op {
struct spi_mem_op mem_op;
u32 replacement_op;
int (*exec_op)(struct intel_spi *ispi,
const struct spi_mem *mem,
const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op);
};
static bool writeable;
module_param(writeable, bool, 0);
MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)");
static void intel_spi_dump_regs(struct intel_spi *ispi)
{
u32 value;
int i;
dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG));
value = readl(ispi->base + HSFSTS_CTL);
dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value);
if (value & HSFSTS_CTL_FLOCKDN)
dev_dbg(ispi->dev, "-> Locked\n");
dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR));
dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK));
for (i = 0; i < 16; i++)
dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n",
i, readl(ispi->base + FDATA(i)));
dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC));
for (i = 0; i < ispi->nregions; i++)
dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
readl(ispi->base + FREG(i)));
for (i = 0; i < ispi->pr_num; i++)
dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
readl(ispi->pregs + PR(i)));
if (ispi->sregs) {
value = readl(ispi->sregs + SSFSTS_CTL);
dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
readl(ispi->sregs + PREOP_OPTYPE));
dev_dbg(ispi->dev, "OPMENU0=0x%08x\n",
readl(ispi->sregs + OPMENU0));
dev_dbg(ispi->dev, "OPMENU1=0x%08x\n",
readl(ispi->sregs + OPMENU1));
}
dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC));
dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC));
dev_dbg(ispi->dev, "Protected regions:\n");
for (i = 0; i < ispi->pr_num; i++) {
u32 base, limit;
value = readl(ispi->pregs + PR(i));
if (!(value & (PR_WPE | PR_RPE)))
continue;
limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
base = value & PR_BASE_MASK;
dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n",
i, base << 12, (limit << 12) | 0xfff,
value & PR_WPE ? 'W' : '.', value & PR_RPE ? 'R' : '.');
}
dev_dbg(ispi->dev, "Flash regions:\n");
for (i = 0; i < ispi->nregions; i++) {
u32 region, base, limit;
region = readl(ispi->base + FREG(i));
base = region & FREG_BASE_MASK;
limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
if (base >= limit || (i > 0 && limit == 0))
dev_dbg(ispi->dev, " %02d disabled\n", i);
else
dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n",
i, base << 12, (limit << 12) | 0xfff);
}
dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
ispi->swseq_reg ? 'S' : 'H');
dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n",
ispi->swseq_erase ? 'S' : 'H');
}
/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size)
{
size_t bytes;
int i = 0;
if (size > INTEL_SPI_FIFO_SZ)
return -EINVAL;
while (size > 0) {
bytes = min_t(size_t, size, 4);
memcpy_fromio(buf, ispi->base + FDATA(i), bytes);
size -= bytes;
buf += bytes;
i++;
}
return 0;
}
/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */
static int intel_spi_write_block(struct intel_spi *ispi, const void *buf,
size_t size)
{
size_t bytes;
int i = 0;
if (size > INTEL_SPI_FIFO_SZ)
return -EINVAL;
while (size > 0) {
bytes = min_t(size_t, size, 4);
memcpy_toio(ispi->base + FDATA(i), buf, bytes);
size -= bytes;
buf += bytes;
i++;
}
return 0;
}
static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
{
u32 val;
return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
!(val & HSFSTS_CTL_SCIP), 0,
INTEL_SPI_TIMEOUT * 1000);
}
static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
{
u32 val;
return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
!(val & SSFSTS_CTL_SCIP), 0,
INTEL_SPI_TIMEOUT * 1000);
}
static bool intel_spi_set_writeable(struct intel_spi *ispi)
{
if (!ispi->info->set_writeable)
return false;
return ispi->info->set_writeable(ispi->base, ispi->info->data);
}
static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype)
{
int i;
int preop;
if (ispi->locked) {
for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
if (ispi->opcodes[i] == opcode)
return i;
return -EINVAL;
}
/* The lock is off, so just use index 0 */
writel(opcode, ispi->sregs + OPMENU0);
preop = readw(ispi->sregs + PREOP_OPTYPE);
writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE);
return 0;
}
static int intel_spi_hw_cycle(struct intel_spi *ispi,
const struct intel_spi_mem_op *iop, size_t len)
{
u32 val, status;
int ret;
if (!iop->replacement_op)
return -EINVAL;
val = readl(ispi->base + HSFSTS_CTL);
val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK);
val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
val |= HSFSTS_CTL_FGO;
val |= iop->replacement_op;
writel(val, ispi->base + HSFSTS_CTL);
ret = intel_spi_wait_hw_busy(ispi);
if (ret)
return ret;
status = readl(ispi->base + HSFSTS_CTL);
if (status & HSFSTS_CTL_FCERR)
return -EIO;
else if (status & HSFSTS_CTL_AEL)
return -EACCES;
return 0;
}
static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, size_t len,
int optype)
{
u32 val = 0, status;
u8 atomic_preopcode;
int ret;
ret = intel_spi_opcode_index(ispi, opcode, optype);
if (ret < 0)
return ret;
/*
* Always clear it after each SW sequencer operation regardless
* of whether it is successful or not.
*/
atomic_preopcode = ispi->atomic_preopcode;
ispi->atomic_preopcode = 0;
/* Only mark 'Data Cycle' bit when there is data to be transferred */
if (len > 0)
val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
val |= ret << SSFSTS_CTL_COP_SHIFT;
val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
val |= SSFSTS_CTL_SCGO;
if (atomic_preopcode) {
u16 preop;
switch (optype) {
case OPTYPE_WRITE_NO_ADDR:
case OPTYPE_WRITE_WITH_ADDR:
/* Pick matching preopcode for the atomic sequence */
preop = readw(ispi->sregs + PREOP_OPTYPE);
if ((preop & 0xff) == atomic_preopcode)
; /* Do nothing */
else if ((preop >> 8) == atomic_preopcode)
val |= SSFSTS_CTL_SPOP;
else
return -EINVAL;
/* Enable atomic sequence */
val |= SSFSTS_CTL_ACS;
break;
default:
return -EINVAL;
}
}
writel(val, ispi->sregs + SSFSTS_CTL);
ret = intel_spi_wait_sw_busy(ispi);
if (ret)
return ret;
status = readl(ispi->sregs + SSFSTS_CTL);
if (status & SSFSTS_CTL_FCERR)
return -EIO;
else if (status & SSFSTS_CTL_AEL)
return -EACCES;
return 0;
}
static u32 intel_spi_chip_addr(const struct intel_spi *ispi,
const struct spi_mem *mem)
{
/* Pick up the correct start address */
if (!mem)
return 0;
return mem->spi->chip_select == 1 ? ispi->chip0_size : 0;
}
static int intel_spi_read_reg(struct intel_spi *ispi, const struct spi_mem *mem,
const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op)
{
u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val;
size_t nbytes = op->data.nbytes;
u8 opcode = op->cmd.opcode;
int ret;
writel(addr, ispi->base + FADDR);
if (ispi->swseq_reg)
ret = intel_spi_sw_cycle(ispi, opcode, nbytes,
OPTYPE_READ_NO_ADDR);
else
ret = intel_spi_hw_cycle(ispi, iop, nbytes);
if (ret)
return ret;
return intel_spi_read_block(ispi, op->data.buf.in, nbytes);
}
static int intel_spi_write_reg(struct intel_spi *ispi, const struct spi_mem *mem,
const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op)
{
u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val;
size_t nbytes = op->data.nbytes;
u8 opcode = op->cmd.opcode;
int ret;
/*
* This is handled with atomic operation and preop code in Intel
* controller so we only verify that it is available. If the
* controller is not locked, program the opcode to the PREOP
* register for later use.
*
* When hardware sequencer is used there is no need to program
* any opcodes (it handles them automatically as part of a command).
*/
if (opcode == SPINOR_OP_WREN) {
u16 preop;
if (!ispi->swseq_reg)
return 0;
preop = readw(ispi->sregs + PREOP_OPTYPE);
if ((preop & 0xff) != opcode && (preop >> 8) != opcode) {
if (ispi->locked)
return -EINVAL;
writel(opcode, ispi->sregs + PREOP_OPTYPE);
}
/*
* This enables atomic sequence on next SW sycle. Will
* be cleared after next operation.
*/
ispi->atomic_preopcode = opcode;
return 0;
}
/*
* We hope that HW sequencer will do the right thing automatically and
* with the SW sequencer we cannot use preopcode anyway, so just ignore
* the Write Disable operation and pretend it was completed
* successfully.
*/
if (opcode == SPINOR_OP_WRDI)
return 0;
writel(addr, ispi->base + FADDR);
/* Write the value beforehand */
ret = intel_spi_write_block(ispi, op->data.buf.out, nbytes);
if (ret)
return ret;
if (ispi->swseq_reg)
return intel_spi_sw_cycle(ispi, opcode, nbytes,
OPTYPE_WRITE_NO_ADDR);
return intel_spi_hw_cycle(ispi, iop, nbytes);
}
static int intel_spi_read(struct intel_spi *ispi, const struct spi_mem *mem,
const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op)
{
u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val;
size_t block_size, nbytes = op->data.nbytes;
void *read_buf = op->data.buf.in;
u32 val, status;
int ret;
/*
* Atomic sequence is not expected with HW sequencer reads. Make
* sure it is cleared regardless.
*/
if (WARN_ON_ONCE(ispi->atomic_preopcode))
ispi->atomic_preopcode = 0;
while (nbytes > 0) {
block_size = min_t(size_t, nbytes, INTEL_SPI_FIFO_SZ);
/* Read cannot cross 4K boundary */
block_size = min_t(loff_t, addr + block_size,
round_up(addr + 1, SZ_4K)) - addr;
writel(addr, ispi->base + FADDR);
val = readl(ispi->base + HSFSTS_CTL);
val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
val |= HSFSTS_CTL_FCYCLE_READ;
val |= HSFSTS_CTL_FGO;
writel(val, ispi->base + HSFSTS_CTL);
ret = intel_spi_wait_hw_busy(ispi);
if (ret)
return ret;
status = readl(ispi->base + HSFSTS_CTL);
if (status & HSFSTS_CTL_FCERR)
ret = -EIO;
else if (status & HSFSTS_CTL_AEL)
ret = -EACCES;
if (ret < 0) {
dev_err(ispi->dev, "read error: %x: %#x\n", addr, status);
return ret;
}
ret = intel_spi_read_block(ispi, read_buf, block_size);
if (ret)
return ret;
nbytes -= block_size;
addr += block_size;
read_buf += block_size;
}
return 0;
}
static int intel_spi_write(struct intel_spi *ispi, const struct spi_mem *mem,
const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op)
{
u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val;
size_t block_size, nbytes = op->data.nbytes;
const void *write_buf = op->data.buf.out;
u32 val, status;
int ret;
/* Not needed with HW sequencer write, make sure it is cleared */
ispi->atomic_preopcode = 0;
while (nbytes > 0) {
block_size = min_t(size_t, nbytes, INTEL_SPI_FIFO_SZ);
/* Write cannot cross 4K boundary */
block_size = min_t(loff_t, addr + block_size,
round_up(addr + 1, SZ_4K)) - addr;
writel(addr, ispi->base + FADDR);
val = readl(ispi->base + HSFSTS_CTL);
val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
val |= HSFSTS_CTL_FCYCLE_WRITE;
ret = intel_spi_write_block(ispi, write_buf, block_size);
if (ret) {
dev_err(ispi->dev, "failed to write block\n");
return ret;
}
/* Start the write now */
val |= HSFSTS_CTL_FGO;
writel(val, ispi->base + HSFSTS_CTL);
ret = intel_spi_wait_hw_busy(ispi);
if (ret) {
dev_err(ispi->dev, "timeout\n");
return ret;
}
status = readl(ispi->base + HSFSTS_CTL);
if (status & HSFSTS_CTL_FCERR)
ret = -EIO;
else if (status & HSFSTS_CTL_AEL)
ret = -EACCES;
if (ret < 0) {
dev_err(ispi->dev, "write error: %x: %#x\n", addr, status);
return ret;
}
nbytes -= block_size;
addr += block_size;
write_buf += block_size;
}
return 0;
}
static int intel_spi_erase(struct intel_spi *ispi, const struct spi_mem *mem,
const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op)
{
u32 addr = intel_spi_chip_addr(ispi, mem) + op->addr.val;
u8 opcode = op->cmd.opcode;
u32 val, status;
int ret;
writel(addr, ispi->base + FADDR);
if (ispi->swseq_erase)
return intel_spi_sw_cycle(ispi, opcode, 0,
OPTYPE_WRITE_WITH_ADDR);
/* Not needed with HW sequencer erase, make sure it is cleared */
ispi->atomic_preopcode = 0;
val = readl(ispi->base + HSFSTS_CTL);
val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
val |= HSFSTS_CTL_FGO;
val |= iop->replacement_op;
writel(val, ispi->base + HSFSTS_CTL);
ret = intel_spi_wait_hw_busy(ispi);
if (ret)
return ret;
status = readl(ispi->base + HSFSTS_CTL);
if (status & HSFSTS_CTL_FCERR)
return -EIO;
if (status & HSFSTS_CTL_AEL)
return -EACCES;
return 0;
}
static int intel_spi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
{
op->data.nbytes = clamp_val(op->data.nbytes, 0, INTEL_SPI_FIFO_SZ);
return 0;
}
static bool intel_spi_cmp_mem_op(const struct intel_spi_mem_op *iop,
const struct spi_mem_op *op)
{
if (iop->mem_op.cmd.nbytes != op->cmd.nbytes ||
iop->mem_op.cmd.buswidth != op->cmd.buswidth ||
iop->mem_op.cmd.dtr != op->cmd.dtr ||
iop->mem_op.cmd.opcode != op->cmd.opcode)
return false;
if (iop->mem_op.addr.nbytes != op->addr.nbytes ||
iop->mem_op.addr.dtr != op->addr.dtr)
return false;
if (iop->mem_op.data.dir != op->data.dir ||
iop->mem_op.data.dtr != op->data.dtr)
return false;
if (iop->mem_op.data.dir != SPI_MEM_NO_DATA) {
if (iop->mem_op.data.buswidth != op->data.buswidth)
return false;
}
return true;
}
static const struct intel_spi_mem_op *
intel_spi_match_mem_op(struct intel_spi *ispi, const struct spi_mem_op *op)
{
const struct intel_spi_mem_op *iop;
for (iop = ispi->mem_ops; iop->mem_op.cmd.opcode; iop++) {
if (intel_spi_cmp_mem_op(iop, op))
break;
}
return iop->mem_op.cmd.opcode ? iop : NULL;
}
static bool intel_spi_supports_mem_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
struct intel_spi *ispi = spi_master_get_devdata(mem->spi->master);
const struct intel_spi_mem_op *iop;
iop = intel_spi_match_mem_op(ispi, op);
if (!iop) {
dev_dbg(ispi->dev, "%#x not supported\n", op->cmd.opcode);
return false;
}
/*
* For software sequencer check that the opcode is actually
* present in the opmenu if it is locked.
*/
if (ispi->swseq_reg && ispi->locked) {
int i;
/* Check if it is in the locked opcodes list */
for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) {
if (ispi->opcodes[i] == op->cmd.opcode)
return true;
}
dev_dbg(ispi->dev, "%#x not supported\n", op->cmd.opcode);
return false;
}
return true;
}
static int intel_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
{
struct intel_spi *ispi = spi_master_get_devdata(mem->spi->master);
const struct intel_spi_mem_op *iop;
iop = intel_spi_match_mem_op(ispi, op);
if (!iop)
return -EOPNOTSUPP;
return iop->exec_op(ispi, mem, iop, op);
}
static const char *intel_spi_get_name(struct spi_mem *mem)
{
const struct intel_spi *ispi = spi_master_get_devdata(mem->spi->master);
/*
* Return name of the flash controller device to be compatible
* with the MTD version.
*/
return dev_name(ispi->dev);
}
static int intel_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
{
struct intel_spi *ispi = spi_master_get_devdata(desc->mem->spi->master);
const struct intel_spi_mem_op *iop;
iop = intel_spi_match_mem_op(ispi, &desc->info.op_tmpl);
if (!iop)
return -EOPNOTSUPP;
desc->priv = (void *)iop;
return 0;
}
static ssize_t intel_spi_dirmap_read(struct spi_mem_dirmap_desc *desc, u64 offs,
size_t len, void *buf)
{
struct intel_spi *ispi = spi_master_get_devdata(desc->mem->spi->master);
const struct intel_spi_mem_op *iop = desc->priv;
struct spi_mem_op op = desc->info.op_tmpl;
int ret;
/* Fill in the gaps */
op.addr.val = offs;
op.data.nbytes = len;
op.data.buf.in = buf;
ret = iop->exec_op(ispi, desc->mem, iop, &op);
return ret ? ret : len;
}
static ssize_t intel_spi_dirmap_write(struct spi_mem_dirmap_desc *desc, u64 offs,
size_t len, const void *buf)
{
struct intel_spi *ispi = spi_master_get_devdata(desc->mem->spi->master);
const struct intel_spi_mem_op *iop = desc->priv;
struct spi_mem_op op = desc->info.op_tmpl;
int ret;
op.addr.val = offs;
op.data.nbytes = len;
op.data.buf.out = buf;
ret = iop->exec_op(ispi, desc->mem, iop, &op);
return ret ? ret : len;
}
static const struct spi_controller_mem_ops intel_spi_mem_ops = {
.adjust_op_size = intel_spi_adjust_op_size,
.supports_op = intel_spi_supports_mem_op,
.exec_op = intel_spi_exec_mem_op,
.get_name = intel_spi_get_name,
.dirmap_create = intel_spi_dirmap_create,
.dirmap_read = intel_spi_dirmap_read,
.dirmap_write = intel_spi_dirmap_write,
};
#define INTEL_SPI_OP_ADDR(__nbytes) \
{ \
.nbytes = __nbytes, \
}
#define INTEL_SPI_OP_NO_DATA \
{ \
.dir = SPI_MEM_NO_DATA, \
}
#define INTEL_SPI_OP_DATA_IN(__buswidth) \
{ \
.dir = SPI_MEM_DATA_IN, \
.buswidth = __buswidth, \
}
#define INTEL_SPI_OP_DATA_OUT(__buswidth) \
{ \
.dir = SPI_MEM_DATA_OUT, \
.buswidth = __buswidth, \
}
#define INTEL_SPI_MEM_OP(__cmd, __addr, __data, __exec_op) \
{ \
.mem_op = { \
.cmd = __cmd, \
.addr = __addr, \
.data = __data, \
}, \
.exec_op = __exec_op, \
}
#define INTEL_SPI_MEM_OP_REPL(__cmd, __addr, __data, __exec_op, __repl) \
{ \
.mem_op = { \
.cmd = __cmd, \
.addr = __addr, \
.data = __data, \
}, \
.exec_op = __exec_op, \
.replacement_op = __repl, \
}
/*
* The controller handles pretty much everything internally based on the
* SFDP data but we want to make sure we only support the operations
* actually possible. Only check buswidth and transfer direction, the
* core validates data.
*/
#define INTEL_SPI_GENERIC_OPS \
/* Status register operations */ \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), \
SPI_MEM_OP_NO_ADDR, \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read_reg, \
HSFSTS_CTL_FCYCLE_RDID), \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), \
SPI_MEM_OP_NO_ADDR, \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read_reg, \
HSFSTS_CTL_FCYCLE_RDSR), \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), \
SPI_MEM_OP_NO_ADDR, \
INTEL_SPI_OP_DATA_OUT(1), \
intel_spi_write_reg, \
HSFSTS_CTL_FCYCLE_WRSR), \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_RDSFDP, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read_reg, \
HSFSTS_CTL_FCYCLE_RDSFDP), \
/* Normal read */ \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(2), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(4), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(2), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(4), \
intel_spi_read), \
/* Fast read */ \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(2), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_IN(4), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(2), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(4), \
intel_spi_read), \
/* Read with 4-byte address opcode */ \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(2), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(4), \
intel_spi_read), \
/* Fast read with 4-byte address opcode */ \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(1), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(2), \
intel_spi_read), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ_FAST_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_IN(4), \
intel_spi_read), \
/* Write operations */ \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_PP, 1), \
INTEL_SPI_OP_ADDR(3), \
INTEL_SPI_OP_DATA_OUT(1), \
intel_spi_write), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_PP, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_OUT(1), \
intel_spi_write), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_PP_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
INTEL_SPI_OP_DATA_OUT(1), \
intel_spi_write), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DATA, \
intel_spi_write_reg), \
INTEL_SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), \
SPI_MEM_OP_NO_ADDR, \
SPI_MEM_OP_NO_DATA, \
intel_spi_write_reg), \
/* Erase operations */ \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_BE_4K, 1), \
INTEL_SPI_OP_ADDR(3), \
SPI_MEM_OP_NO_DATA, \
intel_spi_erase, \
HSFSTS_CTL_FCYCLE_ERASE), \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_BE_4K, 1), \
INTEL_SPI_OP_ADDR(4), \
SPI_MEM_OP_NO_DATA, \
intel_spi_erase, \
HSFSTS_CTL_FCYCLE_ERASE), \
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_BE_4K_4B, 1), \
INTEL_SPI_OP_ADDR(4), \
SPI_MEM_OP_NO_DATA, \
intel_spi_erase, \
HSFSTS_CTL_FCYCLE_ERASE) \
static const struct intel_spi_mem_op generic_mem_ops[] = {
INTEL_SPI_GENERIC_OPS,
{ },
};
static const struct intel_spi_mem_op erase_64k_mem_ops[] = {
INTEL_SPI_GENERIC_OPS,
/* 64k sector erase operations */
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_SE, 1),
INTEL_SPI_OP_ADDR(3),
SPI_MEM_OP_NO_DATA,
intel_spi_erase,
HSFSTS_CTL_FCYCLE_ERASE_64K),
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_SE, 1),
INTEL_SPI_OP_ADDR(4),
SPI_MEM_OP_NO_DATA,
intel_spi_erase,
HSFSTS_CTL_FCYCLE_ERASE_64K),
INTEL_SPI_MEM_OP_REPL(SPI_MEM_OP_CMD(SPINOR_OP_SE_4B, 1),
INTEL_SPI_OP_ADDR(4),
SPI_MEM_OP_NO_DATA,
intel_spi_erase,
HSFSTS_CTL_FCYCLE_ERASE_64K),
{ },
};
static int intel_spi_init(struct intel_spi *ispi)
{
u32 opmenu0, opmenu1, lvscc, uvscc, val;
bool erase_64k = false;
int i;
switch (ispi->info->type) {
case INTEL_SPI_BYT:
ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
ispi->pregs = ispi->base + BYT_PR;
ispi->nregions = BYT_FREG_NUM;
ispi->pr_num = BYT_PR_NUM;
ispi->swseq_reg = true;
break;
case INTEL_SPI_LPT:
ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
ispi->pregs = ispi->base + LPT_PR;
ispi->nregions = LPT_FREG_NUM;
ispi->pr_num = LPT_PR_NUM;
ispi->swseq_reg = true;
break;
case INTEL_SPI_BXT:
ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
ispi->pregs = ispi->base + BXT_PR;
ispi->nregions = BXT_FREG_NUM;
ispi->pr_num = BXT_PR_NUM;
erase_64k = true;
break;
case INTEL_SPI_CNL:
ispi->sregs = NULL;
ispi->pregs = ispi->base + CNL_PR;
ispi->nregions = CNL_FREG_NUM;
ispi->pr_num = CNL_PR_NUM;
erase_64k = true;
break;
default:
return -EINVAL;
}
/* Try to disable write protection if user asked to do so */
if (writeable && !intel_spi_set_writeable(ispi)) {
dev_warn(ispi->dev, "can't disable chip write protection\n");
writeable = false;
}
/* Disable #SMI generation from HW sequencer */
val = readl(ispi->base + HSFSTS_CTL);
val &= ~HSFSTS_CTL_FSMIE;
writel(val, ispi->base + HSFSTS_CTL);
/*
* Determine whether erase operation should use HW or SW sequencer.
*
* The HW sequencer has a predefined list of opcodes, with only the
* erase opcode being programmable in LVSCC and UVSCC registers.
* If these registers don't contain a valid erase opcode, erase
* cannot be done using HW sequencer.
*/
lvscc = readl(ispi->base + LVSCC);
uvscc = readl(ispi->base + UVSCC);
if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK))
ispi->swseq_erase = true;
/* SPI controller on Intel BXT supports 64K erase opcode */
if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase)
if (!(lvscc & ERASE_64K_OPCODE_MASK) ||
!(uvscc & ERASE_64K_OPCODE_MASK))
erase_64k = false;
if (!ispi->sregs && (ispi->swseq_reg || ispi->swseq_erase)) {
dev_err(ispi->dev, "software sequencer not supported, but required\n");
return -EINVAL;
}
/*
* Some controllers can only do basic operations using hardware
* sequencer. All other operations are supposed to be carried out
* using software sequencer.
*/
if (ispi->swseq_reg) {
/* Disable #SMI generation from SW sequencer */
val = readl(ispi->sregs + SSFSTS_CTL);
val &= ~SSFSTS_CTL_FSMIE;
writel(val, ispi->sregs + SSFSTS_CTL);
}
/* Check controller's lock status */
val = readl(ispi->base + HSFSTS_CTL);
ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);
if (ispi->locked && ispi->sregs) {
/*
* BIOS programs allowed opcodes and then locks down the
* register. So read back what opcodes it decided to support.
* That's the set we are going to support as well.
*/
opmenu0 = readl(ispi->sregs + OPMENU0);
opmenu1 = readl(ispi->sregs + OPMENU1);
if (opmenu0 && opmenu1) {
for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
ispi->opcodes[i] = opmenu0 >> i * 8;
ispi->opcodes[i + 4] = opmenu1 >> i * 8;
}
}
}
if (erase_64k) {
dev_dbg(ispi->dev, "Using erase_64k memory operations");
ispi->mem_ops = erase_64k_mem_ops;
} else {
dev_dbg(ispi->dev, "Using generic memory operations");
ispi->mem_ops = generic_mem_ops;
}
intel_spi_dump_regs(ispi);
return 0;
}
static bool intel_spi_is_protected(const struct intel_spi *ispi,
unsigned int base, unsigned int limit)
{
int i;
for (i = 0; i < ispi->pr_num; i++) {
u32 pr_base, pr_limit, pr_value;
pr_value = readl(ispi->pregs + PR(i));
if (!(pr_value & (PR_WPE | PR_RPE)))
continue;
pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
pr_base = pr_value & PR_BASE_MASK;
if (pr_base >= base && pr_limit <= limit)
return true;
}
return false;
}
/*
* There will be a single partition holding all enabled flash regions. We
* call this "BIOS".
*/
static void intel_spi_fill_partition(struct intel_spi *ispi,
struct mtd_partition *part)
{
u64 end;
int i;
memset(part, 0, sizeof(*part));
/* Start from the mandatory descriptor region */
part->size = 4096;
part->name = "BIOS";
/*
* Now try to find where this partition ends based on the flash
* region registers.
*/
for (i = 1; i < ispi->nregions; i++) {
u32 region, base, limit;
region = readl(ispi->base + FREG(i));
base = region & FREG_BASE_MASK;
limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
if (base >= limit || limit == 0)
continue;
/*
* If any of the regions have protection bits set, make the
* whole partition read-only to be on the safe side.
*
* Also if the user did not ask the chip to be writeable
* mask the bit too.
*/
if (!writeable || intel_spi_is_protected(ispi, base, limit))
part->mask_flags |= MTD_WRITEABLE;
end = (limit << 12) + 4096;
if (end > part->size)
part->size = end;
}
}
static int intel_spi_read_desc(struct intel_spi *ispi)
{
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_READ, 0),
SPI_MEM_OP_ADDR(3, 0, 0),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(0, NULL, 0));
u32 buf[2], nc, fcba, flcomp;
ssize_t ret;
op.addr.val = 0x10;
op.data.buf.in = buf;
op.data.nbytes = sizeof(buf);
ret = intel_spi_read(ispi, NULL, NULL, &op);
if (ret) {
dev_warn(ispi->dev, "failed to read descriptor\n");
return ret;
}
dev_dbg(ispi->dev, "FLVALSIG=0x%08x\n", buf[0]);
dev_dbg(ispi->dev, "FLMAP0=0x%08x\n", buf[1]);
if (buf[0] != FLVALSIG_MAGIC) {
dev_warn(ispi->dev, "descriptor signature not valid\n");
return -ENODEV;
}
fcba = (buf[1] & FLMAP0_FCBA_MASK) << 4;
dev_dbg(ispi->dev, "FCBA=%#x\n", fcba);
op.addr.val = fcba;
op.data.buf.in = &flcomp;
op.data.nbytes = sizeof(flcomp);
ret = intel_spi_read(ispi, NULL, NULL, &op);
if (ret) {
dev_warn(ispi->dev, "failed to read FLCOMP\n");
return -ENODEV;
}
dev_dbg(ispi->dev, "FLCOMP=0x%08x\n", flcomp);
switch (flcomp & FLCOMP_C0DEN_MASK) {
case FLCOMP_C0DEN_512K:
ispi->chip0_size = SZ_512K;
break;
case FLCOMP_C0DEN_1M:
ispi->chip0_size = SZ_1M;
break;
case FLCOMP_C0DEN_2M:
ispi->chip0_size = SZ_2M;
break;
case FLCOMP_C0DEN_4M:
ispi->chip0_size = SZ_4M;
break;
case FLCOMP_C0DEN_8M:
ispi->chip0_size = SZ_8M;
break;
case FLCOMP_C0DEN_16M:
ispi->chip0_size = SZ_16M;
break;
case FLCOMP_C0DEN_32M:
ispi->chip0_size = SZ_32M;
break;
case FLCOMP_C0DEN_64M:
ispi->chip0_size = SZ_64M;
break;
default:
return -EINVAL;
}
dev_dbg(ispi->dev, "chip0 size %zd KB\n", ispi->chip0_size / SZ_1K);
nc = (buf[1] & FLMAP0_NC_MASK) >> FLMAP0_NC_SHIFT;
if (!nc)
ispi->master->num_chipselect = 1;
else if (nc == 1)
ispi->master->num_chipselect = 2;
else
return -EINVAL;
dev_dbg(ispi->dev, "%u flash components found\n",
ispi->master->num_chipselect);
return 0;
}
static int intel_spi_populate_chip(struct intel_spi *ispi)
{
struct flash_platform_data *pdata;
struct spi_board_info chip;
int ret;
pdata = devm_kzalloc(ispi->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
pdata->nr_parts = 1;
pdata->parts = devm_kcalloc(ispi->dev, pdata->nr_parts,
sizeof(*pdata->parts), GFP_KERNEL);
if (!pdata->parts)
return -ENOMEM;
intel_spi_fill_partition(ispi, pdata->parts);
memset(&chip, 0, sizeof(chip));
snprintf(chip.modalias, 8, "spi-nor");
chip.platform_data = pdata;
if (!spi_new_device(ispi->master, &chip))
return -ENODEV;
/* Add the second chip if present */
if (ispi->master->num_chipselect < 2)
return 0;
ret = intel_spi_read_desc(ispi);
if (ret)
return ret;
chip.platform_data = NULL;
chip.chip_select = 1;
if (!spi_new_device(ispi->master, &chip))
return -ENODEV;
return 0;
}
/**
* intel_spi_probe() - Probe the Intel SPI flash controller
* @dev: Pointer to the parent device
* @mem: MMIO resource
* @info: Platform specific information
*
* Probes Intel SPI flash controller and creates the flash chip device.
* Returns %0 on success and negative errno in case of failure.
*/
int intel_spi_probe(struct device *dev, struct resource *mem,
const struct intel_spi_boardinfo *info)
{
struct spi_controller *master;
struct intel_spi *ispi;
int ret;
master = devm_spi_alloc_master(dev, sizeof(*ispi));
if (!master)
return -ENOMEM;
master->mem_ops = &intel_spi_mem_ops;
ispi = spi_master_get_devdata(master);
ispi->base = devm_ioremap_resource(dev, mem);
if (IS_ERR(ispi->base))
return PTR_ERR(ispi->base);
ispi->dev = dev;
ispi->master = master;
ispi->info = info;
ret = intel_spi_init(ispi);
if (ret)
return ret;
ret = devm_spi_register_master(dev, master);
if (ret)
return ret;
return intel_spi_populate_chip(ispi);
}
EXPORT_SYMBOL_GPL(intel_spi_probe);
MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
MODULE_LICENSE("GPL v2");