mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 05:55:02 +08:00
76c34f910a
Change rtl8192ce routines phy and trx for addition of RTL8192SE and RTL8192DE. In addition, make necessary modifications to rtl8192cu. This patch also removes the temporary patches needed to enable intermediate steps to build without error. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2508 lines
75 KiB
C
2508 lines
75 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2009-2010 Realtek Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* wlanfae <wlanfae@realtek.com>
|
|
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
|
|
* Hsinchu 300, Taiwan.
|
|
*
|
|
* Larry Finger <Larry.Finger@lwfinger.net>
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include "../wifi.h"
|
|
#include "../efuse.h"
|
|
#include "../base.h"
|
|
#include "../cam.h"
|
|
#include "../ps.h"
|
|
#include "../usb.h"
|
|
#include "reg.h"
|
|
#include "def.h"
|
|
#include "phy.h"
|
|
#include "mac.h"
|
|
#include "dm.h"
|
|
#include "hw.h"
|
|
#include "../rtl8192ce/hw.h"
|
|
#include "trx.h"
|
|
#include "led.h"
|
|
#include "table.h"
|
|
|
|
static void _rtl92cu_phy_param_tab_init(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_phy *rtlphy = &(rtlpriv->phy);
|
|
struct rtl_efuse *rtlefuse = rtl_efuse(rtlpriv);
|
|
|
|
rtlphy->hwparam_tables[MAC_REG].length = RTL8192CUMAC_2T_ARRAYLENGTH;
|
|
rtlphy->hwparam_tables[MAC_REG].pdata = RTL8192CUMAC_2T_ARRAY;
|
|
if (IS_HIGHT_PA(rtlefuse->board_type)) {
|
|
rtlphy->hwparam_tables[PHY_REG_PG].length =
|
|
RTL8192CUPHY_REG_Array_PG_HPLength;
|
|
rtlphy->hwparam_tables[PHY_REG_PG].pdata =
|
|
RTL8192CUPHY_REG_Array_PG_HP;
|
|
} else {
|
|
rtlphy->hwparam_tables[PHY_REG_PG].length =
|
|
RTL8192CUPHY_REG_ARRAY_PGLENGTH;
|
|
rtlphy->hwparam_tables[PHY_REG_PG].pdata =
|
|
RTL8192CUPHY_REG_ARRAY_PG;
|
|
}
|
|
/* 2T */
|
|
rtlphy->hwparam_tables[PHY_REG_2T].length =
|
|
RTL8192CUPHY_REG_2TARRAY_LENGTH;
|
|
rtlphy->hwparam_tables[PHY_REG_2T].pdata =
|
|
RTL8192CUPHY_REG_2TARRAY;
|
|
rtlphy->hwparam_tables[RADIOA_2T].length =
|
|
RTL8192CURADIOA_2TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[RADIOA_2T].pdata =
|
|
RTL8192CURADIOA_2TARRAY;
|
|
rtlphy->hwparam_tables[RADIOB_2T].length =
|
|
RTL8192CURADIOB_2TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[RADIOB_2T].pdata =
|
|
RTL8192CU_RADIOB_2TARRAY;
|
|
rtlphy->hwparam_tables[AGCTAB_2T].length =
|
|
RTL8192CUAGCTAB_2TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[AGCTAB_2T].pdata =
|
|
RTL8192CUAGCTAB_2TARRAY;
|
|
/* 1T */
|
|
if (IS_HIGHT_PA(rtlefuse->board_type)) {
|
|
rtlphy->hwparam_tables[PHY_REG_1T].length =
|
|
RTL8192CUPHY_REG_1T_HPArrayLength;
|
|
rtlphy->hwparam_tables[PHY_REG_1T].pdata =
|
|
RTL8192CUPHY_REG_1T_HPArray;
|
|
rtlphy->hwparam_tables[RADIOA_1T].length =
|
|
RTL8192CURadioA_1T_HPArrayLength;
|
|
rtlphy->hwparam_tables[RADIOA_1T].pdata =
|
|
RTL8192CURadioA_1T_HPArray;
|
|
rtlphy->hwparam_tables[RADIOB_1T].length =
|
|
RTL8192CURADIOB_1TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[RADIOB_1T].pdata =
|
|
RTL8192CU_RADIOB_1TARRAY;
|
|
rtlphy->hwparam_tables[AGCTAB_1T].length =
|
|
RTL8192CUAGCTAB_1T_HPArrayLength;
|
|
rtlphy->hwparam_tables[AGCTAB_1T].pdata =
|
|
Rtl8192CUAGCTAB_1T_HPArray;
|
|
} else {
|
|
rtlphy->hwparam_tables[PHY_REG_1T].length =
|
|
RTL8192CUPHY_REG_1TARRAY_LENGTH;
|
|
rtlphy->hwparam_tables[PHY_REG_1T].pdata =
|
|
RTL8192CUPHY_REG_1TARRAY;
|
|
rtlphy->hwparam_tables[RADIOA_1T].length =
|
|
RTL8192CURADIOA_1TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[RADIOA_1T].pdata =
|
|
RTL8192CU_RADIOA_1TARRAY;
|
|
rtlphy->hwparam_tables[RADIOB_1T].length =
|
|
RTL8192CURADIOB_1TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[RADIOB_1T].pdata =
|
|
RTL8192CU_RADIOB_1TARRAY;
|
|
rtlphy->hwparam_tables[AGCTAB_1T].length =
|
|
RTL8192CUAGCTAB_1TARRAYLENGTH;
|
|
rtlphy->hwparam_tables[AGCTAB_1T].pdata =
|
|
RTL8192CUAGCTAB_1TARRAY;
|
|
}
|
|
}
|
|
|
|
static void _rtl92cu_read_txpower_info_from_hwpg(struct ieee80211_hw *hw,
|
|
bool autoload_fail,
|
|
u8 *hwinfo)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
|
|
u8 rf_path, index, tempval;
|
|
u16 i;
|
|
|
|
for (rf_path = 0; rf_path < 2; rf_path++) {
|
|
for (i = 0; i < 3; i++) {
|
|
if (!autoload_fail) {
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_cck[rf_path][i] =
|
|
hwinfo[EEPROM_TXPOWERCCK + rf_path * 3 + i];
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
|
|
hwinfo[EEPROM_TXPOWERHT40_1S + rf_path * 3 +
|
|
i];
|
|
} else {
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_cck[rf_path][i] =
|
|
EEPROM_DEFAULT_TXPOWERLEVEL;
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
|
|
EEPROM_DEFAULT_TXPOWERLEVEL;
|
|
}
|
|
}
|
|
}
|
|
for (i = 0; i < 3; i++) {
|
|
if (!autoload_fail)
|
|
tempval = hwinfo[EEPROM_TXPOWERHT40_2SDIFF + i];
|
|
else
|
|
tempval = EEPROM_DEFAULT_HT40_2SDIFF;
|
|
rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[RF90_PATH_A][i] =
|
|
(tempval & 0xf);
|
|
rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[RF90_PATH_B][i] =
|
|
((tempval & 0xf0) >> 4);
|
|
}
|
|
for (rf_path = 0; rf_path < 2; rf_path++)
|
|
for (i = 0; i < 3; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
|
|
("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path,
|
|
i, rtlefuse->
|
|
eeprom_chnlarea_txpwr_cck[rf_path][i]));
|
|
for (rf_path = 0; rf_path < 2; rf_path++)
|
|
for (i = 0; i < 3; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
|
|
("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
|
|
rf_path, i,
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_1s[rf_path][i]));
|
|
for (rf_path = 0; rf_path < 2; rf_path++)
|
|
for (i = 0; i < 3; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
|
|
("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
|
|
rf_path, i,
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path]
|
|
[i]));
|
|
for (rf_path = 0; rf_path < 2; rf_path++) {
|
|
for (i = 0; i < 14; i++) {
|
|
index = _rtl92c_get_chnl_group((u8) i);
|
|
rtlefuse->txpwrlevel_cck[rf_path][i] =
|
|
rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][index];
|
|
rtlefuse->txpwrlevel_ht40_1s[rf_path][i] =
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_1s[rf_path][index];
|
|
if ((rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_1s[rf_path][index] -
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][index])
|
|
> 0) {
|
|
rtlefuse->txpwrlevel_ht40_2s[rf_path][i] =
|
|
rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_1s[rf_path]
|
|
[index] - rtlefuse->
|
|
eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path]
|
|
[index];
|
|
} else {
|
|
rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = 0;
|
|
}
|
|
}
|
|
for (i = 0; i < 14; i++) {
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = "
|
|
"[0x%x / 0x%x / 0x%x]\n", rf_path, i,
|
|
rtlefuse->txpwrlevel_cck[rf_path][i],
|
|
rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
|
|
rtlefuse->txpwrlevel_ht40_2s[rf_path][i]));
|
|
}
|
|
}
|
|
for (i = 0; i < 3; i++) {
|
|
if (!autoload_fail) {
|
|
rtlefuse->eeprom_pwrlimit_ht40[i] =
|
|
hwinfo[EEPROM_TXPWR_GROUP + i];
|
|
rtlefuse->eeprom_pwrlimit_ht20[i] =
|
|
hwinfo[EEPROM_TXPWR_GROUP + 3 + i];
|
|
} else {
|
|
rtlefuse->eeprom_pwrlimit_ht40[i] = 0;
|
|
rtlefuse->eeprom_pwrlimit_ht20[i] = 0;
|
|
}
|
|
}
|
|
for (rf_path = 0; rf_path < 2; rf_path++) {
|
|
for (i = 0; i < 14; i++) {
|
|
index = _rtl92c_get_chnl_group((u8) i);
|
|
if (rf_path == RF90_PATH_A) {
|
|
rtlefuse->pwrgroup_ht20[rf_path][i] =
|
|
(rtlefuse->eeprom_pwrlimit_ht20[index]
|
|
& 0xf);
|
|
rtlefuse->pwrgroup_ht40[rf_path][i] =
|
|
(rtlefuse->eeprom_pwrlimit_ht40[index]
|
|
& 0xf);
|
|
} else if (rf_path == RF90_PATH_B) {
|
|
rtlefuse->pwrgroup_ht20[rf_path][i] =
|
|
((rtlefuse->eeprom_pwrlimit_ht20[index]
|
|
& 0xf0) >> 4);
|
|
rtlefuse->pwrgroup_ht40[rf_path][i] =
|
|
((rtlefuse->eeprom_pwrlimit_ht40[index]
|
|
& 0xf0) >> 4);
|
|
}
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF-%d pwrgroup_ht20[%d] = 0x%x\n",
|
|
rf_path, i,
|
|
rtlefuse->pwrgroup_ht20[rf_path][i]));
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF-%d pwrgroup_ht40[%d] = 0x%x\n",
|
|
rf_path, i,
|
|
rtlefuse->pwrgroup_ht40[rf_path][i]));
|
|
}
|
|
}
|
|
for (i = 0; i < 14; i++) {
|
|
index = _rtl92c_get_chnl_group((u8) i);
|
|
if (!autoload_fail)
|
|
tempval = hwinfo[EEPROM_TXPOWERHT20DIFF + index];
|
|
else
|
|
tempval = EEPROM_DEFAULT_HT20_DIFF;
|
|
rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
|
|
rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
|
|
((tempval >> 4) & 0xF);
|
|
if (rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] & BIT(3))
|
|
rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] |= 0xF0;
|
|
if (rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] & BIT(3))
|
|
rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] |= 0xF0;
|
|
index = _rtl92c_get_chnl_group((u8) i);
|
|
if (!autoload_fail)
|
|
tempval = hwinfo[EEPROM_TXPOWER_OFDMDIFF + index];
|
|
else
|
|
tempval = EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
|
|
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] = (tempval & 0xF);
|
|
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
|
|
((tempval >> 4) & 0xF);
|
|
}
|
|
rtlefuse->legacy_ht_txpowerdiff =
|
|
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][7];
|
|
for (i = 0; i < 14; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i,
|
|
rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]));
|
|
for (i = 0; i < 14; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i,
|
|
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]));
|
|
for (i = 0; i < 14; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i,
|
|
rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]));
|
|
for (i = 0; i < 14; i++)
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i,
|
|
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]));
|
|
if (!autoload_fail)
|
|
rtlefuse->eeprom_regulatory = (hwinfo[RF_OPTION1] & 0x7);
|
|
else
|
|
rtlefuse->eeprom_regulatory = 0;
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
|
|
if (!autoload_fail) {
|
|
rtlefuse->eeprom_tssi[RF90_PATH_A] = hwinfo[EEPROM_TSSI_A];
|
|
rtlefuse->eeprom_tssi[RF90_PATH_B] = hwinfo[EEPROM_TSSI_B];
|
|
} else {
|
|
rtlefuse->eeprom_tssi[RF90_PATH_A] = EEPROM_DEFAULT_TSSI;
|
|
rtlefuse->eeprom_tssi[RF90_PATH_B] = EEPROM_DEFAULT_TSSI;
|
|
}
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("TSSI_A = 0x%x, TSSI_B = 0x%x\n",
|
|
rtlefuse->eeprom_tssi[RF90_PATH_A],
|
|
rtlefuse->eeprom_tssi[RF90_PATH_B]));
|
|
if (!autoload_fail)
|
|
tempval = hwinfo[EEPROM_THERMAL_METER];
|
|
else
|
|
tempval = EEPROM_DEFAULT_THERMALMETER;
|
|
rtlefuse->eeprom_thermalmeter = (tempval & 0x1f);
|
|
if (rtlefuse->eeprom_thermalmeter < 0x06 ||
|
|
rtlefuse->eeprom_thermalmeter > 0x1c)
|
|
rtlefuse->eeprom_thermalmeter = 0x12;
|
|
if (rtlefuse->eeprom_thermalmeter == 0x1f || autoload_fail)
|
|
rtlefuse->apk_thermalmeterignore = true;
|
|
rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
|
|
RTPRINT(rtlpriv, FINIT, INIT_TxPower,
|
|
("thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter));
|
|
}
|
|
|
|
static void _rtl92cu_read_board_type(struct ieee80211_hw *hw, u8 *contents)
|
|
{
|
|
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
u8 boardType;
|
|
|
|
if (IS_NORMAL_CHIP(rtlhal->version)) {
|
|
boardType = ((contents[EEPROM_RF_OPT1]) &
|
|
BOARD_TYPE_NORMAL_MASK) >> 5; /*bit[7:5]*/
|
|
} else {
|
|
boardType = contents[EEPROM_RF_OPT4];
|
|
boardType &= BOARD_TYPE_TEST_MASK;
|
|
}
|
|
rtlefuse->board_type = boardType;
|
|
if (IS_HIGHT_PA(rtlefuse->board_type))
|
|
rtlefuse->external_pa = 1;
|
|
printk(KERN_INFO "rtl8192cu: Board Type %x\n", rtlefuse->board_type);
|
|
|
|
#ifdef CONFIG_ANTENNA_DIVERSITY
|
|
/* Antenna Diversity setting. */
|
|
if (registry_par->antdiv_cfg == 2) /* 2: From Efuse */
|
|
rtl_efuse->antenna_cfg = (contents[EEPROM_RF_OPT1]&0x18)>>3;
|
|
else
|
|
rtl_efuse->antenna_cfg = registry_par->antdiv_cfg; /* 0:OFF, */
|
|
|
|
printk(KERN_INFO "rtl8192cu: Antenna Config %x\n",
|
|
rtl_efuse->antenna_cfg);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_BT_COEXIST
|
|
static void _update_bt_param(_adapter *padapter)
|
|
{
|
|
struct btcoexist_priv *pbtpriv = &(padapter->halpriv.bt_coexist);
|
|
struct registry_priv *registry_par = &padapter->registrypriv;
|
|
if (2 != registry_par->bt_iso) {
|
|
/* 0:Low, 1:High, 2:From Efuse */
|
|
pbtpriv->BT_Ant_isolation = registry_par->bt_iso;
|
|
}
|
|
if (registry_par->bt_sco == 1) {
|
|
/* 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter, 4.Busy,
|
|
* 5.OtherBusy */
|
|
pbtpriv->BT_Service = BT_OtherAction;
|
|
} else if (registry_par->bt_sco == 2) {
|
|
pbtpriv->BT_Service = BT_SCO;
|
|
} else if (registry_par->bt_sco == 4) {
|
|
pbtpriv->BT_Service = BT_Busy;
|
|
} else if (registry_par->bt_sco == 5) {
|
|
pbtpriv->BT_Service = BT_OtherBusy;
|
|
} else {
|
|
pbtpriv->BT_Service = BT_Idle;
|
|
}
|
|
pbtpriv->BT_Ampdu = registry_par->bt_ampdu;
|
|
pbtpriv->bCOBT = _TRUE;
|
|
pbtpriv->BtEdcaUL = 0;
|
|
pbtpriv->BtEdcaDL = 0;
|
|
pbtpriv->BtRssiState = 0xff;
|
|
pbtpriv->bInitSet = _FALSE;
|
|
pbtpriv->bBTBusyTraffic = _FALSE;
|
|
pbtpriv->bBTTrafficModeSet = _FALSE;
|
|
pbtpriv->bBTNonTrafficModeSet = _FALSE;
|
|
pbtpriv->CurrentState = 0;
|
|
pbtpriv->PreviousState = 0;
|
|
printk(KERN_INFO "rtl8192cu: BT Coexistance = %s\n",
|
|
(pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
|
|
if (pbtpriv->BT_Coexist) {
|
|
if (pbtpriv->BT_Ant_Num == Ant_x2)
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"Ant_Num = Antx2\n");
|
|
else if (pbtpriv->BT_Ant_Num == Ant_x1)
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"Ant_Num = Antx1\n");
|
|
switch (pbtpriv->BT_CoexistType) {
|
|
case BT_2Wire:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = BT_2Wire\n");
|
|
break;
|
|
case BT_ISSC_3Wire:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = BT_ISSC_3Wire\n");
|
|
break;
|
|
case BT_Accel:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = BT_Accel\n");
|
|
break;
|
|
case BT_CSR_BC4:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = BT_CSR_BC4\n");
|
|
break;
|
|
case BT_CSR_BC8:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = BT_CSR_BC8\n");
|
|
break;
|
|
case BT_RTL8756:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = BT_RTL8756\n");
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
|
|
"CoexistType = Unknown\n");
|
|
break;
|
|
}
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_Ant_isolation = %d\n",
|
|
pbtpriv->BT_Ant_isolation);
|
|
switch (pbtpriv->BT_Service) {
|
|
case BT_OtherAction:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
|
|
"BT_OtherAction\n");
|
|
break;
|
|
case BT_SCO:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
|
|
"BT_SCO\n");
|
|
break;
|
|
case BT_Busy:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
|
|
"BT_Busy\n");
|
|
break;
|
|
case BT_OtherBusy:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
|
|
"BT_OtherBusy\n");
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
|
|
"BT_Idle\n");
|
|
break;
|
|
}
|
|
printk(KERN_INFO "rtl8192cu: BT_RadioSharedType = 0x%x\n",
|
|
pbtpriv->BT_RadioSharedType);
|
|
}
|
|
}
|
|
|
|
#define GET_BT_COEXIST(priv) (&priv->bt_coexist)
|
|
|
|
static void _rtl92cu_read_bluetooth_coexistInfo(struct ieee80211_hw *hw,
|
|
u8 *contents,
|
|
bool bautoloadfailed);
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
|
|
bool isNormal = IS_NORMAL_CHIP(pHalData->VersionID);
|
|
struct btcoexist_priv *pbtpriv = &pHalData->bt_coexist;
|
|
u8 rf_opt4;
|
|
|
|
_rtw_memset(pbtpriv, 0, sizeof(struct btcoexist_priv));
|
|
if (AutoloadFail) {
|
|
pbtpriv->BT_Coexist = _FALSE;
|
|
pbtpriv->BT_CoexistType = BT_2Wire;
|
|
pbtpriv->BT_Ant_Num = Ant_x2;
|
|
pbtpriv->BT_Ant_isolation = 0;
|
|
pbtpriv->BT_RadioSharedType = BT_Radio_Shared;
|
|
return;
|
|
}
|
|
if (isNormal) {
|
|
if (pHalData->BoardType == BOARD_USB_COMBO)
|
|
pbtpriv->BT_Coexist = _TRUE;
|
|
else
|
|
pbtpriv->BT_Coexist = ((PROMContent[EEPROM_RF_OPT3] &
|
|
0x20) >> 5); /* bit[5] */
|
|
rf_opt4 = PROMContent[EEPROM_RF_OPT4];
|
|
pbtpriv->BT_CoexistType = ((rf_opt4&0xe)>>1); /* bit [3:1] */
|
|
pbtpriv->BT_Ant_Num = (rf_opt4&0x1); /* bit [0] */
|
|
pbtpriv->BT_Ant_isolation = ((rf_opt4&0x10)>>4); /* bit [4] */
|
|
pbtpriv->BT_RadioSharedType = ((rf_opt4&0x20)>>5); /* bit [5] */
|
|
} else {
|
|
pbtpriv->BT_Coexist = (PROMContent[EEPROM_RF_OPT4] >> 4) ?
|
|
_TRUE : _FALSE;
|
|
}
|
|
_update_bt_param(Adapter);
|
|
}
|
|
#endif
|
|
|
|
static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
u16 i, usvalue;
|
|
u8 hwinfo[HWSET_MAX_SIZE] = {0};
|
|
u16 eeprom_id;
|
|
|
|
if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
|
|
rtl_efuse_shadow_map_update(hw);
|
|
memcpy((void *)hwinfo,
|
|
(void *)&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
|
|
HWSET_MAX_SIZE);
|
|
} else if (rtlefuse->epromtype == EEPROM_93C46) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("RTL819X Not boot from eeprom, check it !!"));
|
|
}
|
|
RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, ("MAP\n"),
|
|
hwinfo, HWSET_MAX_SIZE);
|
|
eeprom_id = *((u16 *)&hwinfo[0]);
|
|
if (eeprom_id != RTL8190_EEPROM_ID) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
|
|
rtlefuse->autoload_failflag = true;
|
|
} else {
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
|
|
rtlefuse->autoload_failflag = false;
|
|
}
|
|
if (rtlefuse->autoload_failflag == true)
|
|
return;
|
|
for (i = 0; i < 6; i += 2) {
|
|
usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
|
|
*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
|
|
}
|
|
printk(KERN_INFO "rtl8192cu: MAC address: %pM\n", rtlefuse->dev_addr);
|
|
_rtl92cu_read_txpower_info_from_hwpg(hw,
|
|
rtlefuse->autoload_failflag, hwinfo);
|
|
rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
|
|
rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
|
|
(" VID = 0x%02x PID = 0x%02x\n",
|
|
rtlefuse->eeprom_vid, rtlefuse->eeprom_did));
|
|
rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
|
|
rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
|
|
rtlefuse->txpwr_fromeprom = true;
|
|
rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
|
|
("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid));
|
|
if (rtlhal->oem_id == RT_CID_DEFAULT) {
|
|
switch (rtlefuse->eeprom_oemid) {
|
|
case EEPROM_CID_DEFAULT:
|
|
if (rtlefuse->eeprom_did == 0x8176) {
|
|
if ((rtlefuse->eeprom_svid == 0x103C &&
|
|
rtlefuse->eeprom_smid == 0x1629))
|
|
rtlhal->oem_id = RT_CID_819x_HP;
|
|
else
|
|
rtlhal->oem_id = RT_CID_DEFAULT;
|
|
} else {
|
|
rtlhal->oem_id = RT_CID_DEFAULT;
|
|
}
|
|
break;
|
|
case EEPROM_CID_TOSHIBA:
|
|
rtlhal->oem_id = RT_CID_TOSHIBA;
|
|
break;
|
|
case EEPROM_CID_QMI:
|
|
rtlhal->oem_id = RT_CID_819x_QMI;
|
|
break;
|
|
case EEPROM_CID_WHQL:
|
|
default:
|
|
rtlhal->oem_id = RT_CID_DEFAULT;
|
|
break;
|
|
}
|
|
}
|
|
_rtl92cu_read_board_type(hw, hwinfo);
|
|
#ifdef CONFIG_BT_COEXIST
|
|
_rtl92cu_read_bluetooth_coexistInfo(hw, hwinfo,
|
|
rtlefuse->autoload_failflag);
|
|
#endif
|
|
}
|
|
|
|
static void _rtl92cu_hal_customized_behavior(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
|
|
switch (rtlhal->oem_id) {
|
|
case RT_CID_819x_HP:
|
|
usb_priv->ledctl.led_opendrain = true;
|
|
break;
|
|
case RT_CID_819x_Lenovo:
|
|
case RT_CID_DEFAULT:
|
|
case RT_CID_TOSHIBA:
|
|
case RT_CID_CCX:
|
|
case RT_CID_819x_Acer:
|
|
case RT_CID_WHQL:
|
|
default:
|
|
break;
|
|
}
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
|
|
("RT Customized ID: 0x%02X\n", rtlhal->oem_id));
|
|
}
|
|
|
|
void rtl92cu_read_eeprom_info(struct ieee80211_hw *hw)
|
|
{
|
|
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
u8 tmp_u1b;
|
|
|
|
if (!IS_NORMAL_CHIP(rtlhal->version))
|
|
return;
|
|
tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
|
|
rtlefuse->epromtype = (tmp_u1b & BOOT_FROM_EEPROM) ?
|
|
EEPROM_93C46 : EEPROM_BOOT_EFUSE;
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from %s\n",
|
|
(tmp_u1b & BOOT_FROM_EEPROM) ? "EERROM" : "EFUSE"));
|
|
rtlefuse->autoload_failflag = (tmp_u1b & EEPROM_EN) ? false : true;
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload %s\n",
|
|
(tmp_u1b & EEPROM_EN) ? "OK!!" : "ERR!!"));
|
|
_rtl92cu_read_adapter_info(hw);
|
|
_rtl92cu_hal_customized_behavior(hw);
|
|
return;
|
|
}
|
|
|
|
static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
int status = 0;
|
|
u16 value16;
|
|
u8 value8;
|
|
/* polling autoload done. */
|
|
u32 pollingCount = 0;
|
|
|
|
do {
|
|
if (rtl_read_byte(rtlpriv, REG_APS_FSMCO) & PFM_ALDN) {
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
|
|
("Autoload Done!\n"));
|
|
break;
|
|
}
|
|
if (pollingCount++ > 100) {
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
|
|
("Failed to polling REG_APS_FSMCO[PFM_ALDN]"
|
|
" done!\n"));
|
|
return -ENODEV;
|
|
}
|
|
} while (true);
|
|
/* 0. RSV_CTRL 0x1C[7:0] = 0 unlock ISO/CLK/Power control register */
|
|
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0);
|
|
/* Power on when re-enter from IPS/Radio off/card disable */
|
|
/* enable SPS into PWM mode */
|
|
rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
|
|
udelay(100);
|
|
value8 = rtl_read_byte(rtlpriv, REG_LDOV12D_CTRL);
|
|
if (0 == (value8 & LDV12_EN)) {
|
|
value8 |= LDV12_EN;
|
|
rtl_write_byte(rtlpriv, REG_LDOV12D_CTRL, value8);
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
|
|
(" power-on :REG_LDOV12D_CTRL Reg0x21:0x%02x.\n",
|
|
value8));
|
|
udelay(100);
|
|
value8 = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
|
|
value8 &= ~ISO_MD2PP;
|
|
rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, value8);
|
|
}
|
|
/* auto enable WLAN */
|
|
pollingCount = 0;
|
|
value16 = rtl_read_word(rtlpriv, REG_APS_FSMCO);
|
|
value16 |= APFM_ONMAC;
|
|
rtl_write_word(rtlpriv, REG_APS_FSMCO, value16);
|
|
do {
|
|
if (!(rtl_read_word(rtlpriv, REG_APS_FSMCO) & APFM_ONMAC)) {
|
|
printk(KERN_INFO "rtl8192cu: MAC auto ON okay!\n");
|
|
break;
|
|
}
|
|
if (pollingCount++ > 100) {
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
|
|
("Failed to polling REG_APS_FSMCO[APFM_ONMAC]"
|
|
" done!\n"));
|
|
return -ENODEV;
|
|
}
|
|
} while (true);
|
|
/* Enable Radio ,GPIO ,and LED function */
|
|
rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x0812);
|
|
/* release RF digital isolation */
|
|
value16 = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
|
|
value16 &= ~ISO_DIOR;
|
|
rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, value16);
|
|
/* Reconsider when to do this operation after asking HWSD. */
|
|
pollingCount = 0;
|
|
rtl_write_byte(rtlpriv, REG_APSD_CTRL, (rtl_read_byte(rtlpriv,
|
|
REG_APSD_CTRL) & ~BIT(6)));
|
|
do {
|
|
pollingCount++;
|
|
} while ((pollingCount < 200) &&
|
|
(rtl_read_byte(rtlpriv, REG_APSD_CTRL) & BIT(7)));
|
|
/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
|
|
value16 = rtl_read_word(rtlpriv, REG_CR);
|
|
value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN |
|
|
PROTOCOL_EN | SCHEDULE_EN | MACTXEN | MACRXEN | ENSEC);
|
|
rtl_write_word(rtlpriv, REG_CR, value16);
|
|
return status;
|
|
}
|
|
|
|
static void _rtl92cu_init_queue_reserved_page(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 out_ep_num,
|
|
u8 queue_sel)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
bool isChipN = IS_NORMAL_CHIP(rtlhal->version);
|
|
u32 outEPNum = (u32)out_ep_num;
|
|
u32 numHQ = 0;
|
|
u32 numLQ = 0;
|
|
u32 numNQ = 0;
|
|
u32 numPubQ;
|
|
u32 value32;
|
|
u8 value8;
|
|
u32 txQPageNum, txQPageUnit, txQRemainPage;
|
|
|
|
if (!wmm_enable) {
|
|
numPubQ = (isChipN) ? CHIP_B_PAGE_NUM_PUBQ :
|
|
CHIP_A_PAGE_NUM_PUBQ;
|
|
txQPageNum = TX_TOTAL_PAGE_NUMBER - numPubQ;
|
|
|
|
txQPageUnit = txQPageNum/outEPNum;
|
|
txQRemainPage = txQPageNum % outEPNum;
|
|
if (queue_sel & TX_SELE_HQ)
|
|
numHQ = txQPageUnit;
|
|
if (queue_sel & TX_SELE_LQ)
|
|
numLQ = txQPageUnit;
|
|
/* HIGH priority queue always present in the configuration of
|
|
* 2 out-ep. Remainder pages have assigned to High queue */
|
|
if ((outEPNum > 1) && (txQRemainPage))
|
|
numHQ += txQRemainPage;
|
|
/* NOTE: This step done before writting REG_RQPN. */
|
|
if (isChipN) {
|
|
if (queue_sel & TX_SELE_NQ)
|
|
numNQ = txQPageUnit;
|
|
value8 = (u8)_NPQ(numNQ);
|
|
rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8);
|
|
}
|
|
} else {
|
|
/* for WMM ,number of out-ep must more than or equal to 2! */
|
|
numPubQ = isChipN ? WMM_CHIP_B_PAGE_NUM_PUBQ :
|
|
WMM_CHIP_A_PAGE_NUM_PUBQ;
|
|
if (queue_sel & TX_SELE_HQ) {
|
|
numHQ = isChipN ? WMM_CHIP_B_PAGE_NUM_HPQ :
|
|
WMM_CHIP_A_PAGE_NUM_HPQ;
|
|
}
|
|
if (queue_sel & TX_SELE_LQ) {
|
|
numLQ = isChipN ? WMM_CHIP_B_PAGE_NUM_LPQ :
|
|
WMM_CHIP_A_PAGE_NUM_LPQ;
|
|
}
|
|
/* NOTE: This step done before writting REG_RQPN. */
|
|
if (isChipN) {
|
|
if (queue_sel & TX_SELE_NQ)
|
|
numNQ = WMM_CHIP_B_PAGE_NUM_NPQ;
|
|
value8 = (u8)_NPQ(numNQ);
|
|
rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8);
|
|
}
|
|
}
|
|
/* TX DMA */
|
|
value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN;
|
|
rtl_write_dword(rtlpriv, REG_RQPN, value32);
|
|
}
|
|
|
|
static void _rtl92c_init_trx_buffer(struct ieee80211_hw *hw, bool wmm_enable)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
u8 txpktbuf_bndy;
|
|
u8 value8;
|
|
|
|
if (!wmm_enable)
|
|
txpktbuf_bndy = TX_PAGE_BOUNDARY;
|
|
else /* for WMM */
|
|
txpktbuf_bndy = (IS_NORMAL_CHIP(rtlhal->version))
|
|
? WMM_CHIP_B_TX_PAGE_BOUNDARY
|
|
: WMM_CHIP_A_TX_PAGE_BOUNDARY;
|
|
rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
|
|
rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
|
|
rtl_write_byte(rtlpriv, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy);
|
|
rtl_write_byte(rtlpriv, REG_TRXFF_BNDY, txpktbuf_bndy);
|
|
rtl_write_byte(rtlpriv, REG_TDECTRL+1, txpktbuf_bndy);
|
|
rtl_write_word(rtlpriv, (REG_TRXFF_BNDY + 2), 0x27FF);
|
|
value8 = _PSRX(RX_PAGE_SIZE_REG_VALUE) | _PSTX(PBP_128);
|
|
rtl_write_byte(rtlpriv, REG_PBP, value8);
|
|
}
|
|
|
|
static void _rtl92c_init_chipN_reg_priority(struct ieee80211_hw *hw, u16 beQ,
|
|
u16 bkQ, u16 viQ, u16 voQ,
|
|
u16 mgtQ, u16 hiQ)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
u16 value16 = (rtl_read_word(rtlpriv, REG_TRXDMA_CTRL) & 0x7);
|
|
|
|
value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
|
|
_TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
|
|
_TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ);
|
|
rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, value16);
|
|
}
|
|
|
|
static void _rtl92cu_init_chipN_one_out_ep_priority(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 queue_sel)
|
|
{
|
|
u16 uninitialized_var(value);
|
|
|
|
switch (queue_sel) {
|
|
case TX_SELE_HQ:
|
|
value = QUEUE_HIGH;
|
|
break;
|
|
case TX_SELE_LQ:
|
|
value = QUEUE_LOW;
|
|
break;
|
|
case TX_SELE_NQ:
|
|
value = QUEUE_NORMAL;
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* Shall not reach here! */
|
|
break;
|
|
}
|
|
_rtl92c_init_chipN_reg_priority(hw, value, value, value, value,
|
|
value, value);
|
|
printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
|
|
}
|
|
|
|
static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 queue_sel)
|
|
{
|
|
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
|
|
u16 uninitialized_var(valueHi);
|
|
u16 uninitialized_var(valueLow);
|
|
|
|
switch (queue_sel) {
|
|
case (TX_SELE_HQ | TX_SELE_LQ):
|
|
valueHi = QUEUE_HIGH;
|
|
valueLow = QUEUE_LOW;
|
|
break;
|
|
case (TX_SELE_NQ | TX_SELE_LQ):
|
|
valueHi = QUEUE_NORMAL;
|
|
valueLow = QUEUE_LOW;
|
|
break;
|
|
case (TX_SELE_HQ | TX_SELE_NQ):
|
|
valueHi = QUEUE_HIGH;
|
|
valueLow = QUEUE_NORMAL;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
break;
|
|
}
|
|
if (!wmm_enable) {
|
|
beQ = valueLow;
|
|
bkQ = valueLow;
|
|
viQ = valueHi;
|
|
voQ = valueHi;
|
|
mgtQ = valueHi;
|
|
hiQ = valueHi;
|
|
} else {/* for WMM ,CONFIG_OUT_EP_WIFI_MODE */
|
|
beQ = valueHi;
|
|
bkQ = valueLow;
|
|
viQ = valueLow;
|
|
voQ = valueHi;
|
|
mgtQ = valueHi;
|
|
hiQ = valueHi;
|
|
}
|
|
_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
|
|
printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
|
|
}
|
|
|
|
static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 queue_sel)
|
|
{
|
|
u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
|
|
if (!wmm_enable) { /* typical setting */
|
|
beQ = QUEUE_LOW;
|
|
bkQ = QUEUE_LOW;
|
|
viQ = QUEUE_NORMAL;
|
|
voQ = QUEUE_HIGH;
|
|
mgtQ = QUEUE_HIGH;
|
|
hiQ = QUEUE_HIGH;
|
|
} else { /* for WMM */
|
|
beQ = QUEUE_LOW;
|
|
bkQ = QUEUE_NORMAL;
|
|
viQ = QUEUE_NORMAL;
|
|
voQ = QUEUE_HIGH;
|
|
mgtQ = QUEUE_HIGH;
|
|
hiQ = QUEUE_HIGH;
|
|
}
|
|
_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
|
|
("Tx queue select :0x%02x..\n", queue_sel));
|
|
}
|
|
|
|
static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 out_ep_num,
|
|
u8 queue_sel)
|
|
{
|
|
switch (out_ep_num) {
|
|
case 1:
|
|
_rtl92cu_init_chipN_one_out_ep_priority(hw, wmm_enable,
|
|
queue_sel);
|
|
break;
|
|
case 2:
|
|
_rtl92cu_init_chipN_two_out_ep_priority(hw, wmm_enable,
|
|
queue_sel);
|
|
break;
|
|
case 3:
|
|
_rtl92cu_init_chipN_three_out_ep_priority(hw, wmm_enable,
|
|
queue_sel);
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* Shall not reach here! */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void _rtl92cu_init_chipT_queue_priority(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 out_ep_num,
|
|
u8 queue_sel)
|
|
{
|
|
u8 hq_sele = 0;
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
|
|
switch (out_ep_num) {
|
|
case 2: /* (TX_SELE_HQ|TX_SELE_LQ) */
|
|
if (!wmm_enable) /* typical setting */
|
|
hq_sele = HQSEL_VOQ | HQSEL_VIQ | HQSEL_MGTQ |
|
|
HQSEL_HIQ;
|
|
else /* for WMM */
|
|
hq_sele = HQSEL_VOQ | HQSEL_BEQ | HQSEL_MGTQ |
|
|
HQSEL_HIQ;
|
|
break;
|
|
case 1:
|
|
if (TX_SELE_LQ == queue_sel) {
|
|
/* map all endpoint to Low queue */
|
|
hq_sele = 0;
|
|
} else if (TX_SELE_HQ == queue_sel) {
|
|
/* map all endpoint to High queue */
|
|
hq_sele = HQSEL_VOQ | HQSEL_VIQ | HQSEL_BEQ |
|
|
HQSEL_BKQ | HQSEL_MGTQ | HQSEL_HIQ;
|
|
}
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* Shall not reach here! */
|
|
break;
|
|
}
|
|
rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele);
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
|
|
("Tx queue select :0x%02x..\n", hq_sele));
|
|
}
|
|
|
|
static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw,
|
|
bool wmm_enable,
|
|
u8 out_ep_num,
|
|
u8 queue_sel)
|
|
{
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
if (IS_NORMAL_CHIP(rtlhal->version))
|
|
_rtl92cu_init_chipN_queue_priority(hw, wmm_enable, out_ep_num,
|
|
queue_sel);
|
|
else
|
|
_rtl92cu_init_chipT_queue_priority(hw, wmm_enable, out_ep_num,
|
|
queue_sel);
|
|
}
|
|
|
|
static void _rtl92cu_init_usb_aggregation(struct ieee80211_hw *hw)
|
|
{
|
|
}
|
|
|
|
static void _rtl92cu_init_wmac_setting(struct ieee80211_hw *hw)
|
|
{
|
|
u16 value16;
|
|
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
|
|
mac->rx_conf = (RCR_APM | RCR_AM | RCR_ADF | RCR_AB | RCR_APPFCS |
|
|
RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL |
|
|
RCR_APP_MIC | RCR_APP_PHYSTS | RCR_ACRC32);
|
|
rtl_write_dword(rtlpriv, REG_RCR, mac->rx_conf);
|
|
/* Accept all multicast address */
|
|
rtl_write_dword(rtlpriv, REG_MAR, 0xFFFFFFFF);
|
|
rtl_write_dword(rtlpriv, REG_MAR + 4, 0xFFFFFFFF);
|
|
/* Accept all management frames */
|
|
value16 = 0xFFFF;
|
|
rtl92c_set_mgt_filter(hw, value16);
|
|
/* Reject all control frame - default value is 0 */
|
|
rtl92c_set_ctrl_filter(hw, 0x0);
|
|
/* Accept all data frames */
|
|
value16 = 0xFFFF;
|
|
rtl92c_set_data_filter(hw, value16);
|
|
}
|
|
|
|
static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw);
|
|
struct rtl_usb *rtlusb = rtl_usbdev(usb_priv);
|
|
int err = 0;
|
|
u32 boundary = 0;
|
|
u8 wmm_enable = false; /* TODO */
|
|
u8 out_ep_nums = rtlusb->out_ep_nums;
|
|
u8 queue_sel = rtlusb->out_queue_sel;
|
|
err = _rtl92cu_init_power_on(hw);
|
|
|
|
if (err) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("Failed to init power on!\n"));
|
|
return err;
|
|
}
|
|
if (!wmm_enable) {
|
|
boundary = TX_PAGE_BOUNDARY;
|
|
} else { /* for WMM */
|
|
boundary = (IS_NORMAL_CHIP(rtlhal->version))
|
|
? WMM_CHIP_B_TX_PAGE_BOUNDARY
|
|
: WMM_CHIP_A_TX_PAGE_BOUNDARY;
|
|
}
|
|
if (false == rtl92c_init_llt_table(hw, boundary)) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("Failed to init LLT Table!\n"));
|
|
return -EINVAL;
|
|
}
|
|
_rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums,
|
|
queue_sel);
|
|
_rtl92c_init_trx_buffer(hw, wmm_enable);
|
|
_rtl92cu_init_queue_priority(hw, wmm_enable, out_ep_nums,
|
|
queue_sel);
|
|
/* Get Rx PHY status in order to report RSSI and others. */
|
|
rtl92c_init_driver_info_size(hw, RTL92C_DRIVER_INFO_SIZE);
|
|
rtl92c_init_interrupt(hw);
|
|
rtl92c_init_network_type(hw);
|
|
_rtl92cu_init_wmac_setting(hw);
|
|
rtl92c_init_adaptive_ctrl(hw);
|
|
rtl92c_init_edca(hw);
|
|
rtl92c_init_rate_fallback(hw);
|
|
rtl92c_init_retry_function(hw);
|
|
_rtl92cu_init_usb_aggregation(hw);
|
|
rtlpriv->cfg->ops->set_bw_mode(hw, NL80211_CHAN_HT20);
|
|
rtl92c_set_min_space(hw, IS_92C_SERIAL(rtlhal->version));
|
|
rtl92c_init_beacon_parameters(hw, rtlhal->version);
|
|
rtl92c_init_ampdu_aggregation(hw);
|
|
rtl92c_init_beacon_max_error(hw, true);
|
|
return err;
|
|
}
|
|
|
|
void rtl92cu_enable_hw_security_config(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
u8 sec_reg_value = 0x0;
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
|
|
("PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
|
|
rtlpriv->sec.pairwise_enc_algorithm,
|
|
rtlpriv->sec.group_enc_algorithm));
|
|
if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
|
|
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
|
|
("not open sw encryption\n"));
|
|
return;
|
|
}
|
|
sec_reg_value = SCR_TxEncEnable | SCR_RxDecEnable;
|
|
if (rtlpriv->sec.use_defaultkey) {
|
|
sec_reg_value |= SCR_TxUseDK;
|
|
sec_reg_value |= SCR_RxUseDK;
|
|
}
|
|
if (IS_NORMAL_CHIP(rtlhal->version))
|
|
sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
|
|
rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
|
|
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
|
|
("The SECR-value %x\n", sec_reg_value));
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
|
|
}
|
|
|
|
static void _rtl92cu_hw_configure(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
|
|
|
|
/* To Fix MAC loopback mode fail. */
|
|
rtl_write_byte(rtlpriv, REG_LDOHCI12_CTRL, 0x0f);
|
|
rtl_write_byte(rtlpriv, 0x15, 0xe9);
|
|
/* HW SEQ CTRL */
|
|
/* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */
|
|
rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
|
|
/* fixed USB interface interference issue */
|
|
rtl_write_byte(rtlpriv, 0xfe40, 0xe0);
|
|
rtl_write_byte(rtlpriv, 0xfe41, 0x8d);
|
|
rtl_write_byte(rtlpriv, 0xfe42, 0x80);
|
|
rtlusb->reg_bcn_ctrl_val = 0x18;
|
|
rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8)rtlusb->reg_bcn_ctrl_val);
|
|
}
|
|
|
|
static void _InitPABias(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
u8 pa_setting;
|
|
|
|
/* FIXED PA current issue */
|
|
pa_setting = efuse_read_1byte(hw, 0x1FA);
|
|
if (!(pa_setting & BIT(0))) {
|
|
rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0x0F406);
|
|
rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0x4F406);
|
|
rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0x8F406);
|
|
rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0xCF406);
|
|
}
|
|
if (!(pa_setting & BIT(1)) && IS_NORMAL_CHIP(rtlhal->version) &&
|
|
IS_92C_SERIAL(rtlhal->version)) {
|
|
rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0x0F406);
|
|
rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0x4F406);
|
|
rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0x8F406);
|
|
rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0xCF406);
|
|
}
|
|
if (!(pa_setting & BIT(4))) {
|
|
pa_setting = rtl_read_byte(rtlpriv, 0x16);
|
|
pa_setting &= 0x0F;
|
|
rtl_write_byte(rtlpriv, 0x16, pa_setting | 0x90);
|
|
}
|
|
}
|
|
|
|
static void _InitAntenna_Selection(struct ieee80211_hw *hw)
|
|
{
|
|
#ifdef CONFIG_ANTENNA_DIVERSITY
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
struct rtl_phy *rtlphy = &(rtlpriv->phy);
|
|
|
|
if (pHalData->AntDivCfg == 0)
|
|
return;
|
|
|
|
if (rtlphy->rf_type == RF_1T1R) {
|
|
rtl_write_dword(rtlpriv, REG_LEDCFG0,
|
|
rtl_read_dword(rtlpriv,
|
|
REG_LEDCFG0)|BIT(23));
|
|
rtl_set_bbreg(hw, rFPGA0_XAB_RFPARAMETER, BIT(13), 0x01);
|
|
if (rtl_get_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, 0x300) ==
|
|
Antenna_A)
|
|
pHalData->CurAntenna = Antenna_A;
|
|
else
|
|
pHalData->CurAntenna = Antenna_B;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void _dump_registers(struct ieee80211_hw *hw)
|
|
{
|
|
}
|
|
|
|
static void _update_mac_setting(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
|
|
mac->rx_conf = rtl_read_dword(rtlpriv, REG_RCR);
|
|
mac->rx_mgt_filter = rtl_read_word(rtlpriv, REG_RXFLTMAP0);
|
|
mac->rx_ctrl_filter = rtl_read_word(rtlpriv, REG_RXFLTMAP1);
|
|
mac->rx_data_filter = rtl_read_word(rtlpriv, REG_RXFLTMAP2);
|
|
}
|
|
|
|
int rtl92cu_hw_init(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
struct rtl_phy *rtlphy = &(rtlpriv->phy);
|
|
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
|
|
int err = 0;
|
|
static bool iqk_initialized;
|
|
|
|
rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
|
|
err = _rtl92cu_init_mac(hw);
|
|
if (err) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("init mac failed!\n"));
|
|
return err;
|
|
}
|
|
err = rtl92c_download_fw(hw);
|
|
if (err) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
|
|
("Failed to download FW. Init HW without FW now..\n"));
|
|
err = 1;
|
|
rtlhal->fw_ready = false;
|
|
return err;
|
|
} else {
|
|
rtlhal->fw_ready = true;
|
|
}
|
|
rtlhal->last_hmeboxnum = 0; /* h2c */
|
|
_rtl92cu_phy_param_tab_init(hw);
|
|
rtl92cu_phy_mac_config(hw);
|
|
rtl92cu_phy_bb_config(hw);
|
|
rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
|
|
rtl92c_phy_rf_config(hw);
|
|
if (IS_VENDOR_UMC_A_CUT(rtlhal->version) &&
|
|
!IS_92C_SERIAL(rtlhal->version)) {
|
|
rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G1, MASKDWORD, 0x30255);
|
|
rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G2, MASKDWORD, 0x50a00);
|
|
}
|
|
rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
|
|
RF_CHNLBW, RFREG_OFFSET_MASK);
|
|
rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
|
|
RF_CHNLBW, RFREG_OFFSET_MASK);
|
|
rtl92cu_bb_block_on(hw);
|
|
rtl_cam_reset_all_entry(hw);
|
|
rtl92cu_enable_hw_security_config(hw);
|
|
ppsc->rfpwr_state = ERFON;
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
|
|
if (ppsc->rfpwr_state == ERFON) {
|
|
rtl92c_phy_set_rfpath_switch(hw, 1);
|
|
if (iqk_initialized) {
|
|
rtl92c_phy_iq_calibrate(hw, false);
|
|
} else {
|
|
rtl92c_phy_iq_calibrate(hw, false);
|
|
iqk_initialized = true;
|
|
}
|
|
rtl92c_dm_check_txpower_tracking(hw);
|
|
rtl92c_phy_lc_calibrate(hw);
|
|
}
|
|
_rtl92cu_hw_configure(hw);
|
|
_InitPABias(hw);
|
|
_InitAntenna_Selection(hw);
|
|
_update_mac_setting(hw);
|
|
rtl92c_dm_init(hw);
|
|
_dump_registers(hw);
|
|
return err;
|
|
}
|
|
|
|
static void _DisableRFAFEAndResetBB(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
/**************************************
|
|
a. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue
|
|
b. RF path 0 offset 0x00 = 0x00 disable RF
|
|
c. APSD_CTRL 0x600[7:0] = 0x40
|
|
d. SYS_FUNC_EN 0x02[7:0] = 0x16 reset BB state machine
|
|
e. SYS_FUNC_EN 0x02[7:0] = 0x14 reset BB state machine
|
|
***************************************/
|
|
u8 eRFPath = 0, value8 = 0;
|
|
rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
|
|
rtl_set_rfreg(hw, (enum radio_path)eRFPath, 0x0, MASKBYTE0, 0x0);
|
|
|
|
value8 |= APSDOFF;
|
|
rtl_write_byte(rtlpriv, REG_APSD_CTRL, value8); /*0x40*/
|
|
value8 = 0;
|
|
value8 |= (FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn);
|
|
rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, value8);/*0x16*/
|
|
value8 &= (~FEN_BB_GLB_RSTn);
|
|
rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, value8); /*0x14*/
|
|
}
|
|
|
|
static void _ResetDigitalProcedure1(struct ieee80211_hw *hw, bool bWithoutHWSM)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
|
|
if (rtlhal->fw_version <= 0x20) {
|
|
/*****************************
|
|
f. MCUFWDL 0x80[7:0]=0 reset MCU ready status
|
|
g. SYS_FUNC_EN 0x02[10]= 0 reset MCU reg, (8051 reset)
|
|
h. SYS_FUNC_EN 0x02[15-12]= 5 reset MAC reg, DCORE
|
|
i. SYS_FUNC_EN 0x02[10]= 1 enable MCU reg, (8051 enable)
|
|
******************************/
|
|
u16 valu16 = 0;
|
|
|
|
rtl_write_byte(rtlpriv, REG_MCUFWDL, 0);
|
|
valu16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
|
|
rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (valu16 &
|
|
(~FEN_CPUEN))); /* reset MCU ,8051 */
|
|
valu16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN)&0x0FFF;
|
|
rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (valu16 |
|
|
(FEN_HWPDN|FEN_ELDR))); /* reset MAC */
|
|
valu16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
|
|
rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (valu16 |
|
|
FEN_CPUEN)); /* enable MCU ,8051 */
|
|
} else {
|
|
u8 retry_cnts = 0;
|
|
|
|
/* IF fw in RAM code, do reset */
|
|
if (rtl_read_byte(rtlpriv, REG_MCUFWDL) & BIT(1)) {
|
|
/* reset MCU ready status */
|
|
rtl_write_byte(rtlpriv, REG_MCUFWDL, 0);
|
|
if (rtlhal->fw_ready) {
|
|
/* 8051 reset by self */
|
|
rtl_write_byte(rtlpriv, REG_HMETFR+3, 0x20);
|
|
while ((retry_cnts++ < 100) &&
|
|
(FEN_CPUEN & rtl_read_word(rtlpriv,
|
|
REG_SYS_FUNC_EN))) {
|
|
udelay(50);
|
|
}
|
|
if (retry_cnts >= 100) {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("#####=> 8051 reset failed!.."
|
|
".......................\n"););
|
|
/* if 8051 reset fail, reset MAC. */
|
|
rtl_write_byte(rtlpriv,
|
|
REG_SYS_FUNC_EN + 1,
|
|
0x50);
|
|
udelay(100);
|
|
}
|
|
}
|
|
}
|
|
/* Reset MAC and Enable 8051 */
|
|
rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x54);
|
|
rtl_write_byte(rtlpriv, REG_MCUFWDL, 0);
|
|
}
|
|
if (bWithoutHWSM) {
|
|
/*****************************
|
|
Without HW auto state machine
|
|
g.SYS_CLKR 0x08[15:0] = 0x30A3 disable MAC clock
|
|
h.AFE_PLL_CTRL 0x28[7:0] = 0x80 disable AFE PLL
|
|
i.AFE_XTAL_CTRL 0x24[15:0] = 0x880F gated AFE DIG_CLOCK
|
|
j.SYS_ISu_CTRL 0x00[7:0] = 0xF9 isolated digital to PON
|
|
******************************/
|
|
rtl_write_word(rtlpriv, REG_SYS_CLKR, 0x70A3);
|
|
rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
|
|
rtl_write_word(rtlpriv, REG_AFE_XTAL_CTRL, 0x880F);
|
|
rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xF9);
|
|
}
|
|
}
|
|
|
|
static void _ResetDigitalProcedure2(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
/*****************************
|
|
k. SYS_FUNC_EN 0x03[7:0] = 0x44 disable ELDR runction
|
|
l. SYS_CLKR 0x08[15:0] = 0x3083 disable ELDR clock
|
|
m. SYS_ISO_CTRL 0x01[7:0] = 0x83 isolated ELDR to PON
|
|
******************************/
|
|
rtl_write_word(rtlpriv, REG_SYS_CLKR, 0x70A3);
|
|
rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL+1, 0x82);
|
|
}
|
|
|
|
static void _DisableGPIO(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
/***************************************
|
|
j. GPIO_PIN_CTRL 0x44[31:0]=0x000
|
|
k. Value = GPIO_PIN_CTRL[7:0]
|
|
l. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); write ext PIN level
|
|
m. GPIO_MUXCFG 0x42 [15:0] = 0x0780
|
|
n. LEDCFG 0x4C[15:0] = 0x8080
|
|
***************************************/
|
|
u8 value8;
|
|
u16 value16;
|
|
u32 value32;
|
|
|
|
/* 1. Disable GPIO[7:0] */
|
|
rtl_write_word(rtlpriv, REG_GPIO_PIN_CTRL+2, 0x0000);
|
|
value32 = rtl_read_dword(rtlpriv, REG_GPIO_PIN_CTRL) & 0xFFFF00FF;
|
|
value8 = (u8) (value32&0x000000FF);
|
|
value32 |= ((value8<<8) | 0x00FF0000);
|
|
rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, value32);
|
|
/* 2. Disable GPIO[10:8] */
|
|
rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG+3, 0x00);
|
|
value16 = rtl_read_word(rtlpriv, REG_GPIO_MUXCFG+2) & 0xFF0F;
|
|
value8 = (u8) (value16&0x000F);
|
|
value16 |= ((value8<<4) | 0x0780);
|
|
rtl_write_word(rtlpriv, REG_GPIO_PIN_CTRL+2, value16);
|
|
/* 3. Disable LED0 & 1 */
|
|
rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
|
|
}
|
|
|
|
static void _DisableAnalog(struct ieee80211_hw *hw, bool bWithoutHWSM)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
u16 value16 = 0;
|
|
u8 value8 = 0;
|
|
|
|
if (bWithoutHWSM) {
|
|
/*****************************
|
|
n. LDOA15_CTRL 0x20[7:0] = 0x04 disable A15 power
|
|
o. LDOV12D_CTRL 0x21[7:0] = 0x54 disable digital core power
|
|
r. When driver call disable, the ASIC will turn off remaining
|
|
clock automatically
|
|
******************************/
|
|
rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04);
|
|
value8 = rtl_read_byte(rtlpriv, REG_LDOV12D_CTRL);
|
|
value8 &= (~LDV12_EN);
|
|
rtl_write_byte(rtlpriv, REG_LDOV12D_CTRL, value8);
|
|
}
|
|
|
|
/*****************************
|
|
h. SPS0_CTRL 0x11[7:0] = 0x23 enter PFM mode
|
|
i. APS_FSMCO 0x04[15:0] = 0x4802 set USB suspend
|
|
******************************/
|
|
rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
|
|
value16 |= (APDM_HOST | AFSM_HSUS | PFM_ALDN);
|
|
rtl_write_word(rtlpriv, REG_APS_FSMCO, (u16)value16);
|
|
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0E);
|
|
}
|
|
|
|
static void _CardDisableHWSM(struct ieee80211_hw *hw)
|
|
{
|
|
/* ==== RF Off Sequence ==== */
|
|
_DisableRFAFEAndResetBB(hw);
|
|
/* ==== Reset digital sequence ====== */
|
|
_ResetDigitalProcedure1(hw, false);
|
|
/* ==== Pull GPIO PIN to balance level and LED control ====== */
|
|
_DisableGPIO(hw);
|
|
/* ==== Disable analog sequence === */
|
|
_DisableAnalog(hw, false);
|
|
}
|
|
|
|
static void _CardDisableWithoutHWSM(struct ieee80211_hw *hw)
|
|
{
|
|
/*==== RF Off Sequence ==== */
|
|
_DisableRFAFEAndResetBB(hw);
|
|
/* ==== Reset digital sequence ====== */
|
|
_ResetDigitalProcedure1(hw, true);
|
|
/* ==== Pull GPIO PIN to balance level and LED control ====== */
|
|
_DisableGPIO(hw);
|
|
/* ==== Reset digital sequence ====== */
|
|
_ResetDigitalProcedure2(hw);
|
|
/* ==== Disable analog sequence === */
|
|
_DisableAnalog(hw, true);
|
|
}
|
|
|
|
static void _rtl92cu_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
|
|
u8 set_bits, u8 clear_bits)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
|
|
|
|
rtlusb->reg_bcn_ctrl_val |= set_bits;
|
|
rtlusb->reg_bcn_ctrl_val &= ~clear_bits;
|
|
rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlusb->reg_bcn_ctrl_val);
|
|
}
|
|
|
|
static void _rtl92cu_stop_tx_beacon(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
u8 tmp1byte = 0;
|
|
if (IS_NORMAL_CHIP(rtlhal->version)) {
|
|
tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
|
|
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
|
|
tmp1byte & (~BIT(6)));
|
|
rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
|
|
tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
|
|
tmp1byte &= ~(BIT(0));
|
|
rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
|
|
} else {
|
|
rtl_write_byte(rtlpriv, REG_TXPAUSE,
|
|
rtl_read_byte(rtlpriv, REG_TXPAUSE) | BIT(6));
|
|
}
|
|
}
|
|
|
|
static void _rtl92cu_resume_tx_beacon(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
u8 tmp1byte = 0;
|
|
|
|
if (IS_NORMAL_CHIP(rtlhal->version)) {
|
|
tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
|
|
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
|
|
tmp1byte | BIT(6));
|
|
rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
|
|
tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
|
|
tmp1byte |= BIT(0);
|
|
rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
|
|
} else {
|
|
rtl_write_byte(rtlpriv, REG_TXPAUSE,
|
|
rtl_read_byte(rtlpriv, REG_TXPAUSE) & (~BIT(6)));
|
|
}
|
|
}
|
|
|
|
static void _rtl92cu_enable_bcn_sub_func(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
|
|
if (IS_NORMAL_CHIP(rtlhal->version))
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(1));
|
|
else
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
|
|
}
|
|
|
|
static void _rtl92cu_disable_bcn_sub_func(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
|
|
if (IS_NORMAL_CHIP(rtlhal->version))
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(1), 0);
|
|
else
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
|
|
}
|
|
|
|
static int _rtl92cu_set_media_status(struct ieee80211_hw *hw,
|
|
enum nl80211_iftype type)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
|
|
enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
|
|
|
|
bt_msr &= 0xfc;
|
|
rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xFF);
|
|
if (type == NL80211_IFTYPE_UNSPECIFIED || type ==
|
|
NL80211_IFTYPE_STATION) {
|
|
_rtl92cu_stop_tx_beacon(hw);
|
|
_rtl92cu_enable_bcn_sub_func(hw);
|
|
} else if (type == NL80211_IFTYPE_ADHOC || type == NL80211_IFTYPE_AP) {
|
|
_rtl92cu_resume_tx_beacon(hw);
|
|
_rtl92cu_disable_bcn_sub_func(hw);
|
|
} else {
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, ("Set HW_VAR_MEDIA_"
|
|
"STATUS:No such media status(%x).\n", type));
|
|
}
|
|
switch (type) {
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
bt_msr |= MSR_NOLINK;
|
|
ledaction = LED_CTL_LINK;
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
|
|
("Set Network type to NO LINK!\n"));
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
bt_msr |= MSR_ADHOC;
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
|
|
("Set Network type to Ad Hoc!\n"));
|
|
break;
|
|
case NL80211_IFTYPE_STATION:
|
|
bt_msr |= MSR_INFRA;
|
|
ledaction = LED_CTL_LINK;
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
|
|
("Set Network type to STA!\n"));
|
|
break;
|
|
case NL80211_IFTYPE_AP:
|
|
bt_msr |= MSR_AP;
|
|
RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
|
|
("Set Network type to AP!\n"));
|
|
break;
|
|
default:
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("Network type %d not support!\n", type));
|
|
goto error_out;
|
|
}
|
|
rtl_write_byte(rtlpriv, (MSR), bt_msr);
|
|
rtlpriv->cfg->ops->led_control(hw, ledaction);
|
|
if ((bt_msr & 0xfc) == MSR_AP)
|
|
rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
|
|
else
|
|
rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
|
|
return 0;
|
|
error_out:
|
|
return 1;
|
|
}
|
|
|
|
void rtl92cu_card_disable(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
|
|
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
enum nl80211_iftype opmode;
|
|
|
|
mac->link_state = MAC80211_NOLINK;
|
|
opmode = NL80211_IFTYPE_UNSPECIFIED;
|
|
_rtl92cu_set_media_status(hw, opmode);
|
|
rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
|
|
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
|
|
if (rtlusb->disableHWSM)
|
|
_CardDisableHWSM(hw);
|
|
else
|
|
_CardDisableWithoutHWSM(hw);
|
|
}
|
|
|
|
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
|
|
{
|
|
/* dummy routine needed for callback from rtl_op_configure_filter() */
|
|
}
|
|
|
|
/*========================================================================== */
|
|
|
|
static void _rtl92cu_set_check_bssid(struct ieee80211_hw *hw,
|
|
enum nl80211_iftype type)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
struct rtl_phy *rtlphy = &(rtlpriv->phy);
|
|
u8 filterout_non_associated_bssid = false;
|
|
|
|
switch (type) {
|
|
case NL80211_IFTYPE_ADHOC:
|
|
case NL80211_IFTYPE_STATION:
|
|
filterout_non_associated_bssid = true;
|
|
break;
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
case NL80211_IFTYPE_AP:
|
|
default:
|
|
break;
|
|
}
|
|
if (filterout_non_associated_bssid == true) {
|
|
if (IS_NORMAL_CHIP(rtlhal->version)) {
|
|
switch (rtlphy->current_io_type) {
|
|
case IO_CMD_RESUME_DM_BY_SCAN:
|
|
reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
|
|
rtlpriv->cfg->ops->set_hw_reg(hw,
|
|
HW_VAR_RCR, (u8 *)(®_rcr));
|
|
/* enable update TSF */
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
|
|
break;
|
|
case IO_CMD_PAUSE_DM_BY_SCAN:
|
|
reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN);
|
|
rtlpriv->cfg->ops->set_hw_reg(hw,
|
|
HW_VAR_RCR, (u8 *)(®_rcr));
|
|
/* disable update TSF */
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
|
|
break;
|
|
}
|
|
} else {
|
|
reg_rcr |= (RCR_CBSSID);
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
|
|
(u8 *)(®_rcr));
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, (BIT(4)|BIT(5)));
|
|
}
|
|
} else if (filterout_non_associated_bssid == false) {
|
|
if (IS_NORMAL_CHIP(rtlhal->version)) {
|
|
reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
|
|
(u8 *)(®_rcr));
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
|
|
} else {
|
|
reg_rcr &= (~RCR_CBSSID);
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
|
|
(u8 *)(®_rcr));
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4)|BIT(5)), 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
int rtl92cu_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
|
|
{
|
|
if (_rtl92cu_set_media_status(hw, type))
|
|
return -EOPNOTSUPP;
|
|
_rtl92cu_set_check_bssid(hw, type);
|
|
return 0;
|
|
}
|
|
|
|
static void _InitBeaconParameters(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
|
|
|
|
rtl_write_word(rtlpriv, REG_BCN_CTRL, 0x1010);
|
|
|
|
/* TODO: Remove these magic number */
|
|
rtl_write_word(rtlpriv, REG_TBTT_PROHIBIT, 0x6404);
|
|
rtl_write_byte(rtlpriv, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);
|
|
rtl_write_byte(rtlpriv, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME);
|
|
/* Change beacon AIFS to the largest number
|
|
* beacause test chip does not contension before sending beacon. */
|
|
if (IS_NORMAL_CHIP(rtlhal->version))
|
|
rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660F);
|
|
else
|
|
rtl_write_word(rtlpriv, REG_BCNTCFG, 0x66FF);
|
|
}
|
|
|
|
static void _beacon_function_enable(struct ieee80211_hw *hw, bool Enable,
|
|
bool Linked)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4) | BIT(3) | BIT(1)), 0x00);
|
|
rtl_write_byte(rtlpriv, REG_RD_CTRL+1, 0x6F);
|
|
}
|
|
|
|
void rtl92cu_set_beacon_related_registers(struct ieee80211_hw *hw)
|
|
{
|
|
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
u16 bcn_interval, atim_window;
|
|
u32 value32;
|
|
|
|
bcn_interval = mac->beacon_interval;
|
|
atim_window = 2; /*FIX MERGE */
|
|
rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
|
|
rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
|
|
_InitBeaconParameters(hw);
|
|
rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
|
|
/*
|
|
* Force beacon frame transmission even after receiving beacon frame
|
|
* from other ad hoc STA
|
|
*
|
|
*
|
|
* Reset TSF Timer to zero, added by Roger. 2008.06.24
|
|
*/
|
|
value32 = rtl_read_dword(rtlpriv, REG_TCR);
|
|
value32 &= ~TSFRST;
|
|
rtl_write_dword(rtlpriv, REG_TCR, value32);
|
|
value32 |= TSFRST;
|
|
rtl_write_dword(rtlpriv, REG_TCR, value32);
|
|
RT_TRACE(rtlpriv, COMP_INIT|COMP_BEACON, DBG_LOUD,
|
|
("SetBeaconRelatedRegisters8192CUsb(): Set TCR(%x)\n",
|
|
value32));
|
|
/* TODO: Modify later (Find the right parameters)
|
|
* NOTE: Fix test chip's bug (about contention windows's randomness) */
|
|
if ((mac->opmode == NL80211_IFTYPE_ADHOC) ||
|
|
(mac->opmode == NL80211_IFTYPE_AP)) {
|
|
rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x50);
|
|
rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x50);
|
|
}
|
|
_beacon_function_enable(hw, true, true);
|
|
}
|
|
|
|
void rtl92cu_set_beacon_interval(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
u16 bcn_interval = mac->beacon_interval;
|
|
|
|
RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
|
|
("beacon_interval:%d\n", bcn_interval));
|
|
rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
|
|
}
|
|
|
|
void rtl92cu_update_interrupt_mask(struct ieee80211_hw *hw,
|
|
u32 add_msr, u32 rm_msr)
|
|
{
|
|
}
|
|
|
|
void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
|
|
switch (variable) {
|
|
case HW_VAR_RCR:
|
|
*((u32 *)(val)) = mac->rx_conf;
|
|
break;
|
|
case HW_VAR_RF_STATE:
|
|
*((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
|
|
break;
|
|
case HW_VAR_FWLPS_RF_ON:{
|
|
enum rf_pwrstate rfState;
|
|
u32 val_rcr;
|
|
|
|
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
|
|
(u8 *)(&rfState));
|
|
if (rfState == ERFOFF) {
|
|
*((bool *) (val)) = true;
|
|
} else {
|
|
val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
|
|
val_rcr &= 0x00070000;
|
|
if (val_rcr)
|
|
*((bool *) (val)) = false;
|
|
else
|
|
*((bool *) (val)) = true;
|
|
}
|
|
break;
|
|
}
|
|
case HW_VAR_FW_PSMODE_STATUS:
|
|
*((bool *) (val)) = ppsc->fw_current_inpsmode;
|
|
break;
|
|
case HW_VAR_CORRECT_TSF:{
|
|
u64 tsf;
|
|
u32 *ptsf_low = (u32 *)&tsf;
|
|
u32 *ptsf_high = ((u32 *)&tsf) + 1;
|
|
|
|
*ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
|
|
*ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
|
|
*((u64 *)(val)) = tsf;
|
|
break;
|
|
}
|
|
case HW_VAR_MGT_FILTER:
|
|
*((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP0);
|
|
break;
|
|
case HW_VAR_CTRL_FILTER:
|
|
*((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP1);
|
|
break;
|
|
case HW_VAR_DATA_FILTER:
|
|
*((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP2);
|
|
break;
|
|
default:
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("switch case not process\n"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
|
|
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
|
|
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
|
|
enum wireless_mode wirelessmode = mac->mode;
|
|
u8 idx = 0;
|
|
|
|
switch (variable) {
|
|
case HW_VAR_ETHER_ADDR:{
|
|
for (idx = 0; idx < ETH_ALEN; idx++) {
|
|
rtl_write_byte(rtlpriv, (REG_MACID + idx),
|
|
val[idx]);
|
|
}
|
|
break;
|
|
}
|
|
case HW_VAR_BASIC_RATE:{
|
|
u16 rate_cfg = ((u16 *) val)[0];
|
|
u8 rate_index = 0;
|
|
|
|
rate_cfg &= 0x15f;
|
|
/* TODO */
|
|
/* if (mac->current_network.vender == HT_IOT_PEER_CISCO
|
|
* && ((rate_cfg & 0x150) == 0)) {
|
|
* rate_cfg |= 0x010;
|
|
* } */
|
|
rate_cfg |= 0x01;
|
|
rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
|
|
rtl_write_byte(rtlpriv, REG_RRSR + 1,
|
|
(rate_cfg >> 8) & 0xff);
|
|
while (rate_cfg > 0x1) {
|
|
rate_cfg >>= 1;
|
|
rate_index++;
|
|
}
|
|
rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL,
|
|
rate_index);
|
|
break;
|
|
}
|
|
case HW_VAR_BSSID:{
|
|
for (idx = 0; idx < ETH_ALEN; idx++) {
|
|
rtl_write_byte(rtlpriv, (REG_BSSID + idx),
|
|
val[idx]);
|
|
}
|
|
break;
|
|
}
|
|
case HW_VAR_SIFS:{
|
|
rtl_write_byte(rtlpriv, REG_SIFS_CCK + 1, val[0]);
|
|
rtl_write_byte(rtlpriv, REG_SIFS_OFDM + 1, val[1]);
|
|
rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
|
|
rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
|
|
rtl_write_byte(rtlpriv, REG_R2T_SIFS+1, val[0]);
|
|
rtl_write_byte(rtlpriv, REG_T2T_SIFS+1, val[0]);
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
|
|
("HW_VAR_SIFS\n"));
|
|
break;
|
|
}
|
|
case HW_VAR_SLOT_TIME:{
|
|
u8 e_aci;
|
|
u8 QOS_MODE = 1;
|
|
|
|
rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
|
|
("HW_VAR_SLOT_TIME %x\n", val[0]));
|
|
if (QOS_MODE) {
|
|
for (e_aci = 0; e_aci < AC_MAX; e_aci++)
|
|
rtlpriv->cfg->ops->set_hw_reg(hw,
|
|
HW_VAR_AC_PARAM,
|
|
(u8 *)(&e_aci));
|
|
} else {
|
|
u8 sifstime = 0;
|
|
u8 u1bAIFS;
|
|
|
|
if (IS_WIRELESS_MODE_A(wirelessmode) ||
|
|
IS_WIRELESS_MODE_N_24G(wirelessmode) ||
|
|
IS_WIRELESS_MODE_N_5G(wirelessmode))
|
|
sifstime = 16;
|
|
else
|
|
sifstime = 10;
|
|
u1bAIFS = sifstime + (2 * val[0]);
|
|
rtl_write_byte(rtlpriv, REG_EDCA_VO_PARAM,
|
|
u1bAIFS);
|
|
rtl_write_byte(rtlpriv, REG_EDCA_VI_PARAM,
|
|
u1bAIFS);
|
|
rtl_write_byte(rtlpriv, REG_EDCA_BE_PARAM,
|
|
u1bAIFS);
|
|
rtl_write_byte(rtlpriv, REG_EDCA_BK_PARAM,
|
|
u1bAIFS);
|
|
}
|
|
break;
|
|
}
|
|
case HW_VAR_ACK_PREAMBLE:{
|
|
u8 reg_tmp;
|
|
u8 short_preamble = (bool) (*(u8 *) val);
|
|
reg_tmp = 0;
|
|
if (short_preamble)
|
|
reg_tmp |= 0x80;
|
|
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp);
|
|
break;
|
|
}
|
|
case HW_VAR_AMPDU_MIN_SPACE:{
|
|
u8 min_spacing_to_set;
|
|
u8 sec_min_space;
|
|
|
|
min_spacing_to_set = *((u8 *) val);
|
|
if (min_spacing_to_set <= 7) {
|
|
switch (rtlpriv->sec.pairwise_enc_algorithm) {
|
|
case NO_ENCRYPTION:
|
|
case AESCCMP_ENCRYPTION:
|
|
sec_min_space = 0;
|
|
break;
|
|
case WEP40_ENCRYPTION:
|
|
case WEP104_ENCRYPTION:
|
|
case TKIP_ENCRYPTION:
|
|
sec_min_space = 6;
|
|
break;
|
|
default:
|
|
sec_min_space = 7;
|
|
break;
|
|
}
|
|
if (min_spacing_to_set < sec_min_space)
|
|
min_spacing_to_set = sec_min_space;
|
|
mac->min_space_cfg = ((mac->min_space_cfg &
|
|
0xf8) |
|
|
min_spacing_to_set);
|
|
*val = min_spacing_to_set;
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
|
|
("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
|
|
mac->min_space_cfg));
|
|
rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
|
|
mac->min_space_cfg);
|
|
}
|
|
break;
|
|
}
|
|
case HW_VAR_SHORTGI_DENSITY:{
|
|
u8 density_to_set;
|
|
|
|
density_to_set = *((u8 *) val);
|
|
density_to_set &= 0x1f;
|
|
mac->min_space_cfg &= 0x07;
|
|
mac->min_space_cfg |= (density_to_set << 3);
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
|
|
("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
|
|
mac->min_space_cfg));
|
|
rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
|
|
mac->min_space_cfg);
|
|
break;
|
|
}
|
|
case HW_VAR_AMPDU_FACTOR:{
|
|
u8 regtoset_normal[4] = {0x41, 0xa8, 0x72, 0xb9};
|
|
u8 factor_toset;
|
|
u8 *p_regtoset = NULL;
|
|
u8 index = 0;
|
|
|
|
p_regtoset = regtoset_normal;
|
|
factor_toset = *((u8 *) val);
|
|
if (factor_toset <= 3) {
|
|
factor_toset = (1 << (factor_toset + 2));
|
|
if (factor_toset > 0xf)
|
|
factor_toset = 0xf;
|
|
for (index = 0; index < 4; index++) {
|
|
if ((p_regtoset[index] & 0xf0) >
|
|
(factor_toset << 4))
|
|
p_regtoset[index] =
|
|
(p_regtoset[index] & 0x0f)
|
|
| (factor_toset << 4);
|
|
if ((p_regtoset[index] & 0x0f) >
|
|
factor_toset)
|
|
p_regtoset[index] =
|
|
(p_regtoset[index] & 0xf0)
|
|
| (factor_toset);
|
|
rtl_write_byte(rtlpriv,
|
|
(REG_AGGLEN_LMT + index),
|
|
p_regtoset[index]);
|
|
}
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
|
|
("Set HW_VAR_AMPDU_FACTOR: %#x\n",
|
|
factor_toset));
|
|
}
|
|
break;
|
|
}
|
|
case HW_VAR_AC_PARAM:{
|
|
u8 e_aci = *((u8 *) val);
|
|
u32 u4b_ac_param;
|
|
u16 cw_min = le16_to_cpu(mac->ac[e_aci].cw_min);
|
|
u16 cw_max = le16_to_cpu(mac->ac[e_aci].cw_max);
|
|
u16 tx_op = le16_to_cpu(mac->ac[e_aci].tx_op);
|
|
|
|
u4b_ac_param = (u32) mac->ac[e_aci].aifs;
|
|
u4b_ac_param |= (u32) ((cw_min & 0xF) <<
|
|
AC_PARAM_ECW_MIN_OFFSET);
|
|
u4b_ac_param |= (u32) ((cw_max & 0xF) <<
|
|
AC_PARAM_ECW_MAX_OFFSET);
|
|
u4b_ac_param |= (u32) tx_op << AC_PARAM_TXOP_OFFSET;
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
|
|
("queue:%x, ac_param:%x\n", e_aci,
|
|
u4b_ac_param));
|
|
switch (e_aci) {
|
|
case AC1_BK:
|
|
rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM,
|
|
u4b_ac_param);
|
|
break;
|
|
case AC0_BE:
|
|
rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM,
|
|
u4b_ac_param);
|
|
break;
|
|
case AC2_VI:
|
|
rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM,
|
|
u4b_ac_param);
|
|
break;
|
|
case AC3_VO:
|
|
rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM,
|
|
u4b_ac_param);
|
|
break;
|
|
default:
|
|
RT_ASSERT(false, ("SetHwReg8185(): invalid"
|
|
" aci: %d !\n", e_aci));
|
|
break;
|
|
}
|
|
if (rtlusb->acm_method != eAcmWay2_SW)
|
|
rtlpriv->cfg->ops->set_hw_reg(hw,
|
|
HW_VAR_ACM_CTRL, (u8 *)(&e_aci));
|
|
break;
|
|
}
|
|
case HW_VAR_ACM_CTRL:{
|
|
u8 e_aci = *((u8 *) val);
|
|
union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)
|
|
(&(mac->ac[0].aifs));
|
|
u8 acm = p_aci_aifsn->f.acm;
|
|
u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
|
|
|
|
acm_ctrl =
|
|
acm_ctrl | ((rtlusb->acm_method == 2) ? 0x0 : 0x1);
|
|
if (acm) {
|
|
switch (e_aci) {
|
|
case AC0_BE:
|
|
acm_ctrl |= AcmHw_BeqEn;
|
|
break;
|
|
case AC2_VI:
|
|
acm_ctrl |= AcmHw_ViqEn;
|
|
break;
|
|
case AC3_VO:
|
|
acm_ctrl |= AcmHw_VoqEn;
|
|
break;
|
|
default:
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
|
|
("HW_VAR_ACM_CTRL acm set "
|
|
"failed: eACI is %d\n", acm));
|
|
break;
|
|
}
|
|
} else {
|
|
switch (e_aci) {
|
|
case AC0_BE:
|
|
acm_ctrl &= (~AcmHw_BeqEn);
|
|
break;
|
|
case AC2_VI:
|
|
acm_ctrl &= (~AcmHw_ViqEn);
|
|
break;
|
|
case AC3_VO:
|
|
acm_ctrl &= (~AcmHw_BeqEn);
|
|
break;
|
|
default:
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
|
|
("switch case not process\n"));
|
|
break;
|
|
}
|
|
}
|
|
RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
|
|
("SetHwReg8190pci(): [HW_VAR_ACM_CTRL] "
|
|
"Write 0x%X\n", acm_ctrl));
|
|
rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
|
|
break;
|
|
}
|
|
case HW_VAR_RCR:{
|
|
rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]);
|
|
mac->rx_conf = ((u32 *) (val))[0];
|
|
RT_TRACE(rtlpriv, COMP_RECV, DBG_DMESG,
|
|
("### Set RCR(0x%08x) ###\n", mac->rx_conf));
|
|
break;
|
|
}
|
|
case HW_VAR_RETRY_LIMIT:{
|
|
u8 retry_limit = ((u8 *) (val))[0];
|
|
|
|
rtl_write_word(rtlpriv, REG_RL,
|
|
retry_limit << RETRY_LIMIT_SHORT_SHIFT |
|
|
retry_limit << RETRY_LIMIT_LONG_SHIFT);
|
|
RT_TRACE(rtlpriv, COMP_MLME, DBG_DMESG, ("Set HW_VAR_R"
|
|
"ETRY_LIMIT(0x%08x)\n", retry_limit));
|
|
break;
|
|
}
|
|
case HW_VAR_DUAL_TSF_RST:
|
|
rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
|
|
break;
|
|
case HW_VAR_EFUSE_BYTES:
|
|
rtlefuse->efuse_usedbytes = *((u16 *) val);
|
|
break;
|
|
case HW_VAR_EFUSE_USAGE:
|
|
rtlefuse->efuse_usedpercentage = *((u8 *) val);
|
|
break;
|
|
case HW_VAR_IO_CMD:
|
|
rtl92c_phy_set_io_cmd(hw, (*(enum io_type *)val));
|
|
break;
|
|
case HW_VAR_WPA_CONFIG:
|
|
rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val));
|
|
break;
|
|
case HW_VAR_SET_RPWM:{
|
|
u8 rpwm_val = rtl_read_byte(rtlpriv, REG_USB_HRPWM);
|
|
|
|
if (rpwm_val & BIT(7))
|
|
rtl_write_byte(rtlpriv, REG_USB_HRPWM,
|
|
(*(u8 *)val));
|
|
else
|
|
rtl_write_byte(rtlpriv, REG_USB_HRPWM,
|
|
((*(u8 *)val) | BIT(7)));
|
|
break;
|
|
}
|
|
case HW_VAR_H2C_FW_PWRMODE:{
|
|
u8 psmode = (*(u8 *) val);
|
|
|
|
if ((psmode != FW_PS_ACTIVE_MODE) &&
|
|
(!IS_92C_SERIAL(rtlhal->version)))
|
|
rtl92c_dm_rf_saving(hw, true);
|
|
rtl92c_set_fw_pwrmode_cmd(hw, (*(u8 *) val));
|
|
break;
|
|
}
|
|
case HW_VAR_FW_PSMODE_STATUS:
|
|
ppsc->fw_current_inpsmode = *((bool *) val);
|
|
break;
|
|
case HW_VAR_H2C_FW_JOINBSSRPT:{
|
|
u8 mstatus = (*(u8 *) val);
|
|
u8 tmp_reg422;
|
|
bool recover = false;
|
|
|
|
if (mstatus == RT_MEDIA_CONNECT) {
|
|
rtlpriv->cfg->ops->set_hw_reg(hw,
|
|
HW_VAR_AID, NULL);
|
|
rtl_write_byte(rtlpriv, REG_CR + 1, 0x03);
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(3));
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0);
|
|
tmp_reg422 = rtl_read_byte(rtlpriv,
|
|
REG_FWHW_TXQ_CTRL + 2);
|
|
if (tmp_reg422 & BIT(6))
|
|
recover = true;
|
|
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
|
|
tmp_reg422 & (~BIT(6)));
|
|
rtl92c_set_fw_rsvdpagepkt(hw, 0);
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
|
|
if (recover)
|
|
rtl_write_byte(rtlpriv,
|
|
REG_FWHW_TXQ_CTRL + 2,
|
|
tmp_reg422 | BIT(6));
|
|
rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
|
|
}
|
|
rtl92c_set_fw_joinbss_report_cmd(hw, (*(u8 *) val));
|
|
break;
|
|
}
|
|
case HW_VAR_AID:{
|
|
u16 u2btmp;
|
|
|
|
u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
|
|
u2btmp &= 0xC000;
|
|
rtl_write_word(rtlpriv, REG_BCN_PSR_RPT,
|
|
(u2btmp | mac->assoc_id));
|
|
break;
|
|
}
|
|
case HW_VAR_CORRECT_TSF:{
|
|
u8 btype_ibss = ((u8 *) (val))[0];
|
|
|
|
if (btype_ibss == true)
|
|
_rtl92cu_stop_tx_beacon(hw);
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(3));
|
|
rtl_write_dword(rtlpriv, REG_TSFTR, (u32)(mac->tsf &
|
|
0xffffffff));
|
|
rtl_write_dword(rtlpriv, REG_TSFTR + 4,
|
|
(u32)((mac->tsf >> 32) & 0xffffffff));
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
|
|
if (btype_ibss == true)
|
|
_rtl92cu_resume_tx_beacon(hw);
|
|
break;
|
|
}
|
|
case HW_VAR_MGT_FILTER:
|
|
rtl_write_word(rtlpriv, REG_RXFLTMAP0, *(u16 *)val);
|
|
break;
|
|
case HW_VAR_CTRL_FILTER:
|
|
rtl_write_word(rtlpriv, REG_RXFLTMAP1, *(u16 *)val);
|
|
break;
|
|
case HW_VAR_DATA_FILTER:
|
|
rtl_write_word(rtlpriv, REG_RXFLTMAP2, *(u16 *)val);
|
|
break;
|
|
default:
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
|
|
"not process\n"));
|
|
break;
|
|
}
|
|
}
|
|
|
|
void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
|
|
struct ieee80211_sta *sta,
|
|
u8 rssi_level)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_phy *rtlphy = &(rtlpriv->phy);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
u32 ratr_value = (u32) mac->basic_rates;
|
|
u8 *mcsrate = mac->mcs;
|
|
u8 ratr_index = 0;
|
|
u8 nmode = mac->ht_enable;
|
|
u8 mimo_ps = 1;
|
|
u16 shortgi_rate = 0;
|
|
u32 tmp_ratr_value = 0;
|
|
u8 curtxbw_40mhz = mac->bw_40;
|
|
u8 curshortgi_40mhz = mac->sgi_40;
|
|
u8 curshortgi_20mhz = mac->sgi_20;
|
|
enum wireless_mode wirelessmode = mac->mode;
|
|
|
|
ratr_value |= ((*(u16 *) (mcsrate))) << 12;
|
|
switch (wirelessmode) {
|
|
case WIRELESS_MODE_B:
|
|
if (ratr_value & 0x0000000c)
|
|
ratr_value &= 0x0000000d;
|
|
else
|
|
ratr_value &= 0x0000000f;
|
|
break;
|
|
case WIRELESS_MODE_G:
|
|
ratr_value &= 0x00000FF5;
|
|
break;
|
|
case WIRELESS_MODE_N_24G:
|
|
case WIRELESS_MODE_N_5G:
|
|
nmode = 1;
|
|
if (mimo_ps == 0) {
|
|
ratr_value &= 0x0007F005;
|
|
} else {
|
|
u32 ratr_mask;
|
|
|
|
if (get_rf_type(rtlphy) == RF_1T2R ||
|
|
get_rf_type(rtlphy) == RF_1T1R)
|
|
ratr_mask = 0x000ff005;
|
|
else
|
|
ratr_mask = 0x0f0ff005;
|
|
if (curtxbw_40mhz)
|
|
ratr_mask |= 0x00000010;
|
|
ratr_value &= ratr_mask;
|
|
}
|
|
break;
|
|
default:
|
|
if (rtlphy->rf_type == RF_1T2R)
|
|
ratr_value &= 0x000ff0ff;
|
|
else
|
|
ratr_value &= 0x0f0ff0ff;
|
|
break;
|
|
}
|
|
ratr_value &= 0x0FFFFFFF;
|
|
if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
|
|
(!curtxbw_40mhz && curshortgi_20mhz))) {
|
|
ratr_value |= 0x10000000;
|
|
tmp_ratr_value = (ratr_value >> 12);
|
|
for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
|
|
if ((1 << shortgi_rate) & tmp_ratr_value)
|
|
break;
|
|
}
|
|
shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
|
|
(shortgi_rate << 4) | (shortgi_rate);
|
|
}
|
|
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
|
|
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, ("%x\n", rtl_read_dword(rtlpriv,
|
|
REG_ARFR0)));
|
|
}
|
|
|
|
void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_phy *rtlphy = &(rtlpriv->phy);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
u32 ratr_bitmap = (u32) mac->basic_rates;
|
|
u8 *p_mcsrate = mac->mcs;
|
|
u8 ratr_index = 0;
|
|
u8 curtxbw_40mhz = mac->bw_40;
|
|
u8 curshortgi_40mhz = mac->sgi_40;
|
|
u8 curshortgi_20mhz = mac->sgi_20;
|
|
enum wireless_mode wirelessmode = mac->mode;
|
|
bool shortgi = false;
|
|
u8 rate_mask[5];
|
|
u8 macid = 0;
|
|
u8 mimops = 1;
|
|
|
|
ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
|
|
switch (wirelessmode) {
|
|
case WIRELESS_MODE_B:
|
|
ratr_index = RATR_INX_WIRELESS_B;
|
|
if (ratr_bitmap & 0x0000000c)
|
|
ratr_bitmap &= 0x0000000d;
|
|
else
|
|
ratr_bitmap &= 0x0000000f;
|
|
break;
|
|
case WIRELESS_MODE_G:
|
|
ratr_index = RATR_INX_WIRELESS_GB;
|
|
if (rssi_level == 1)
|
|
ratr_bitmap &= 0x00000f00;
|
|
else if (rssi_level == 2)
|
|
ratr_bitmap &= 0x00000ff0;
|
|
else
|
|
ratr_bitmap &= 0x00000ff5;
|
|
break;
|
|
case WIRELESS_MODE_A:
|
|
ratr_index = RATR_INX_WIRELESS_A;
|
|
ratr_bitmap &= 0x00000ff0;
|
|
break;
|
|
case WIRELESS_MODE_N_24G:
|
|
case WIRELESS_MODE_N_5G:
|
|
ratr_index = RATR_INX_WIRELESS_NGB;
|
|
if (mimops == 0) {
|
|
if (rssi_level == 1)
|
|
ratr_bitmap &= 0x00070000;
|
|
else if (rssi_level == 2)
|
|
ratr_bitmap &= 0x0007f000;
|
|
else
|
|
ratr_bitmap &= 0x0007f005;
|
|
} else {
|
|
if (rtlphy->rf_type == RF_1T2R ||
|
|
rtlphy->rf_type == RF_1T1R) {
|
|
if (curtxbw_40mhz) {
|
|
if (rssi_level == 1)
|
|
ratr_bitmap &= 0x000f0000;
|
|
else if (rssi_level == 2)
|
|
ratr_bitmap &= 0x000ff000;
|
|
else
|
|
ratr_bitmap &= 0x000ff015;
|
|
} else {
|
|
if (rssi_level == 1)
|
|
ratr_bitmap &= 0x000f0000;
|
|
else if (rssi_level == 2)
|
|
ratr_bitmap &= 0x000ff000;
|
|
else
|
|
ratr_bitmap &= 0x000ff005;
|
|
}
|
|
} else {
|
|
if (curtxbw_40mhz) {
|
|
if (rssi_level == 1)
|
|
ratr_bitmap &= 0x0f0f0000;
|
|
else if (rssi_level == 2)
|
|
ratr_bitmap &= 0x0f0ff000;
|
|
else
|
|
ratr_bitmap &= 0x0f0ff015;
|
|
} else {
|
|
if (rssi_level == 1)
|
|
ratr_bitmap &= 0x0f0f0000;
|
|
else if (rssi_level == 2)
|
|
ratr_bitmap &= 0x0f0ff000;
|
|
else
|
|
ratr_bitmap &= 0x0f0ff005;
|
|
}
|
|
}
|
|
}
|
|
if ((curtxbw_40mhz && curshortgi_40mhz) ||
|
|
(!curtxbw_40mhz && curshortgi_20mhz)) {
|
|
if (macid == 0)
|
|
shortgi = true;
|
|
else if (macid == 1)
|
|
shortgi = false;
|
|
}
|
|
break;
|
|
default:
|
|
ratr_index = RATR_INX_WIRELESS_NGB;
|
|
if (rtlphy->rf_type == RF_1T2R)
|
|
ratr_bitmap &= 0x000ff0ff;
|
|
else
|
|
ratr_bitmap &= 0x0f0ff0ff;
|
|
break;
|
|
}
|
|
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, ("ratr_bitmap :%x\n",
|
|
ratr_bitmap));
|
|
*(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) |
|
|
ratr_index << 28);
|
|
rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
|
|
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, ("Rate_index:%x, "
|
|
"ratr_val:%x, %x:%x:%x:%x:%x\n",
|
|
ratr_index, ratr_bitmap,
|
|
rate_mask[0], rate_mask[1],
|
|
rate_mask[2], rate_mask[3],
|
|
rate_mask[4]));
|
|
rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
|
|
}
|
|
|
|
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
u16 sifs_timer;
|
|
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
|
|
(u8 *)&mac->slot_time);
|
|
if (!mac->ht_enable)
|
|
sifs_timer = 0x0a0a;
|
|
else
|
|
sifs_timer = 0x0e0e;
|
|
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
|
|
}
|
|
|
|
bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
|
|
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
|
|
enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate;
|
|
u8 u1tmp = 0;
|
|
bool actuallyset = false;
|
|
unsigned long flag = 0;
|
|
/* to do - usb autosuspend */
|
|
u8 usb_autosuspend = 0;
|
|
|
|
if (ppsc->swrf_processing)
|
|
return false;
|
|
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
|
|
if (ppsc->rfchange_inprogress) {
|
|
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
|
|
return false;
|
|
} else {
|
|
ppsc->rfchange_inprogress = true;
|
|
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
|
|
}
|
|
cur_rfstate = ppsc->rfpwr_state;
|
|
if (usb_autosuspend) {
|
|
/* to do................... */
|
|
} else {
|
|
if (ppsc->pwrdown_mode) {
|
|
u1tmp = rtl_read_byte(rtlpriv, REG_HSISR);
|
|
e_rfpowerstate_toset = (u1tmp & BIT(7)) ?
|
|
ERFOFF : ERFON;
|
|
RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
|
|
("pwrdown, 0x5c(BIT7)=%02x\n", u1tmp));
|
|
} else {
|
|
rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG,
|
|
rtl_read_byte(rtlpriv,
|
|
REG_MAC_PINMUX_CFG) & ~(BIT(3)));
|
|
u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
|
|
e_rfpowerstate_toset = (u1tmp & BIT(3)) ?
|
|
ERFON : ERFOFF;
|
|
RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
|
|
("GPIO_IN=%02x\n", u1tmp));
|
|
}
|
|
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("N-SS RF =%x\n",
|
|
e_rfpowerstate_toset));
|
|
}
|
|
if ((ppsc->hwradiooff) && (e_rfpowerstate_toset == ERFON)) {
|
|
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("GPIOChangeRF - HW "
|
|
"Radio ON, RF ON\n"));
|
|
ppsc->hwradiooff = false;
|
|
actuallyset = true;
|
|
} else if ((!ppsc->hwradiooff) && (e_rfpowerstate_toset ==
|
|
ERFOFF)) {
|
|
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("GPIOChangeRF - HW"
|
|
" Radio OFF\n"));
|
|
ppsc->hwradiooff = true;
|
|
actuallyset = true;
|
|
} else {
|
|
RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD ,
|
|
("pHalData->bHwRadioOff and eRfPowerStateToSet do not"
|
|
" match: pHalData->bHwRadioOff %x, eRfPowerStateToSet "
|
|
"%x\n", ppsc->hwradiooff, e_rfpowerstate_toset));
|
|
}
|
|
if (actuallyset) {
|
|
ppsc->hwradiooff = 1;
|
|
if (e_rfpowerstate_toset == ERFON) {
|
|
if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
|
|
RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM))
|
|
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
|
|
else if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_PCI_D3)
|
|
&& RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3))
|
|
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3);
|
|
}
|
|
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
|
|
ppsc->rfchange_inprogress = false;
|
|
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
|
|
/* For power down module, we need to enable register block
|
|
* contrl reg at 0x1c. Then enable power down control bit
|
|
* of register 0x04 BIT4 and BIT15 as 1.
|
|
*/
|
|
if (ppsc->pwrdown_mode && e_rfpowerstate_toset == ERFOFF) {
|
|
/* Enable register area 0x0-0xc. */
|
|
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0);
|
|
if (IS_HARDWARE_TYPE_8723U(rtlhal)) {
|
|
/*
|
|
* We should configure HW PDn source for WiFi
|
|
* ONLY, and then our HW will be set in
|
|
* power-down mode if PDn source from all
|
|
* functions are configured.
|
|
*/
|
|
u1tmp = rtl_read_byte(rtlpriv,
|
|
REG_MULTI_FUNC_CTRL);
|
|
rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL,
|
|
(u1tmp|WL_HWPDN_EN));
|
|
} else {
|
|
rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x8812);
|
|
}
|
|
}
|
|
if (e_rfpowerstate_toset == ERFOFF) {
|
|
if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM)
|
|
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
|
|
else if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_PCI_D3)
|
|
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3);
|
|
}
|
|
} else if (e_rfpowerstate_toset == ERFOFF || cur_rfstate == ERFOFF) {
|
|
/* Enter D3 or ASPM after GPIO had been done. */
|
|
if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM)
|
|
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
|
|
else if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_PCI_D3)
|
|
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3);
|
|
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
|
|
ppsc->rfchange_inprogress = false;
|
|
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
|
|
} else {
|
|
spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
|
|
ppsc->rfchange_inprogress = false;
|
|
spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
|
|
}
|
|
*valid = 1;
|
|
return !ppsc->hwradiooff;
|
|
}
|